Different GL Account for WRX - based on Valuation Class (No Material Master

Hi Gurus,
My scenario is as given below.
1. We do not have any Material Master. We create short text PO's with account assignment category "P".
2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1) and another Material Group (say M2) for Import Purchases.
3. We have assigned valuation class say 3100 for Material Group M1 and valuation class 3101 for Material Group M2.
4. Our plant is say RBUP and our valuation grouping code is say 0001 which is assigned to the same plant.
Objective:
While doing MIGO we want to have different GR/IR Account for domestic purchases say 108 and different GR/IR account for import purchases say 109.
Issue:
1. In OBYC setting GR/IR account is picked from transaction key WRX.
2. Our entries in WRX are as given below for our Chart Of Accounts say DMN.
Valuation Modifier Valuation Class GL Account
0001 108
0001 3100 108
0001 3101 109
3. But even when i am creating the PO with Material Group M2, it is not picking the GR/IR account 109, based on the valuation class i.e. 3101 which is assigned to the Material Group M2.
Query:
1. How can I achieve my objective of selecting GR/IR Account 109 for Import PO's and GR/IR Account 108 for Domestic PO's.
Pl note we will not be maintain material master.
Will give full 10 points if anyone can help me reslove this issue.
Pl also do not waste any of your valuable time to address the account assignments for BSX or GBB-VBR. I am fully aware that in VBR this differentiation is possible.
Rgds,
Prasad.

I suggest you to create a Dummy Materials. Lets say,
material number: 1001
enter material description as Domestic
material number: 1002
enter material description as Imports
and in OBYC for GBB
make the following settings:
val grp      gen mod    val cla      gl a/c dr     gl a/c cr
0001     VBR     4000     74180040     74180040
0001     VBR     4001     78020091     78020091
so that when u create PO u can get default GL (consumption GL )  for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
val grp   val cla    gl a/c dr   gl a/c cr
0001      4000     123456     123456
0001      4001     456789     456789
Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
hope this helps

Similar Messages

  • How to change Valuation class in material master(have stock)

    HI,
    I would like to change the valuation class in material master, How to change VC? is there any process before changing VC?
    I heared when Material have nil stock then only it's possible to change VC, Is it correct? which TC can I use for change VC?
    Regards,
    venki

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • Different GL Account for WRX for Separate Asset Class

    Hi Gurus
    We are on 4.7 in a Production environment. We have the following scenario:
    We have created a new asset class called as LA. For procurement of asset from this asset class, we want to maintain a different GL in the WRX (GR/IR) account key in OBYC. All the other assets should use the default WRX GL account except the new asset class LA.
    Pls advise on how to achieve this.
    Regards

    Hi
    Asset postings will not be based on valuation class/ class. What ever is the default GL account assigned in WRX (without valuation class) postings will hit that account.
    Thanks

  • How to get Valuation class in Material master?

    Dear all,
                I want to have valuation class in my report and i want to take is as a material attribute.Actually i have check all the attribute of material master but valuation class is not there. i am having valuation class as a master data as individual . How can i get the valuation type in the Material master?I need it in Material master only.
    Regards,
    Macwan James

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • Valuation class of material master to be changed

    Hello,
    My master data team has insereted a wrong valuation class in the material master record. Purchase order has been raised and a GR has been done for the same. SAP gives following steps to change the valuation class:
    The valuation class cannot be changed, choose 'Display error'
    Message no. M3368
    "Diagnosis
    You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
    Valuated stocks in the current period or in the previous period
    Open purchase orders or delivery schedule lines
    Production orders for which a goods movement has already taken place
    System response
    Your change is reset by the system.
    Procedure
    If valuated stocks already exist, you can change the valuation class only as follows:
    a) Post the stocks of the material to an interim account.
    b) Change the valuation class in the material master record.
    c) Post the stocks of the material back to their original account.
    If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
    If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted."
    My question is how do I post the stocks to an interim account since stock accounts are configured to post automatically?
    If anyone knows how to manage the posting, please let me know.
    Thanks
    Keyur

    Hi,
    Make the movement with a movement type in MIGO  that posts to the same account in FI for all Valuation classes.
    After changing the Val. CLass then reverse the above movement.
    Kind regards

  • GL account for WRX - GR/IR Clearing Account

    Dear All,
    We have a common material which will be purchased through domestic an import PO. Valuation Class is assigned for the material in OBYC for a GL account.
    Requirement is to have different GL account for WRX when material is purchased through domestic PO or Import PO.
    Can we achieve by General Modifier in WRX and also we need 1) enhancement or through 2) Standard config we can assign different General Modifier to different type of purchase of material?
    Kindly let me know best possible solution to achieve the requirement.
    Regards
    Vikas

    In your case you need to stop this material code what it is running currently and close all the opens documents and make the stock as zero.
    Later you need to activate split valuation first  and  assign the valuation category domestic and import for that material with two different valuation class so you can differentiate the values in accounts...
    For more info on split valuation refer the below link...
    Split Valuation - Valuation Category "X" - Contributor Corner - SCN Wiki

  • 2 Valuation Class - Same Material Type

    Hi ,
    I have 2 Valuation class 9001 & 9003 for ZPAC Materil Type .
    9001 - Packaging & 9003 Casing .
    Where i can find the difference between this Valuation class in Material Master.
    I have 2 Material with different Valuation class with same Material type.
    I Could nt able to find the difference in between this 2 material.
    Like Packaging & Casing where i can find this,
    Pl suggest.
    Thanks
    Ram

    Hi,
    Go to OMWC, there click on "Global Categories", here position cursor on the Valuation category (which is maintained for Material Master) and click on "Change" button, here check have you entered any Valuation type in field "Default: val.type ext.procure."
    This defaults the Valuation Type in Purchasing Documents.
    In MIGO, if you don't want to enter valuation types manually then use concept of Batch Determination if your materials are batch managed.
    Procedure for Batch Determination: -
    1. Go to OMCG and here put Batch Search Strategy "ME0001" against Movement Types 541 and 543 O
    2. Now in MBC1 - Maintain condition record for Strategy Type "ME02" and here keep Selection Type as "O"
    After doing the above settings, system will not determine the batch and valuation type during Subcontracting PO, but at the time of Transfer Posting (MB1B) and Consumption of Components (MIGO), system will determine batches and corresponding valuation type
    If materials are not batch managed then go for "Stock Determination Procedure"
    1. OSPX - Define Strategies for Stock Determination
    Here take a copy of Stock Determination group "0001" and create a new and assign to your plant.
    After maintaining Stock Determination group and rule go to "Stock Determination Item Table", here enter stock type as "F", Storage Location (if required, otherwise keep it blank), enter priority as 1, 2, 3 and valuation types against that in which sequence you want these to be determined.
    Now in SPRO > MM > Inventory Management and Physical Inventory > Stock Determination > Assign Stock Determination Rule in the Applications >  Inventory Management > Here assign Stock Determination Rule to 541 and 543
    Now assign Stock determ. group in MM02, under "Plant data / stor.2" view of material master
    Now in MIGO - Click on "Stock Determination" button to get the valuation types automatically.

  • Define Valuation Class against Material Group through SPRO.

    Hi,
    Can we define Valuation Class against Material Group through SPRO.
    Because we don't want to insert valuation class during material master creation. Reason, User can select easily wrong Valuation class during creation of material master and due to this, valuated in wrong GL accounts...
    During material creation, valuation class should automatically show in Accounting View.
    Pleas guide..

    Hi,
    For your requirement as you have 10 Material Types and you should have 10 new account category reference &10 new  valuation class and link(OMSK)each Material Type with individual valuation class though respective account category reference. Also assign each account category reference in respective material type in OMS2. So when you create material (MM01) with a particular material type, then only assigned valuation class will be defaulted/allowed to enter in accounting -1 view.
    In the standard we have some predefined material type, valuation class and account category reference and a link between them has already established by the system. If we are using these standard setting no additional efforts are required. But to meet any specific requirement, if we have to create a new material type or a new valuation classes or a new Account Category Reference (all the three), then we have to establish this links in bewteen.
    Regards,
    Biju K

  • Configuring for different GR/IR accounts for WRX T/E Key

    Hi ,
    I am in a strange situation. I have to configure the automatic postings for MM, in transaction event key WRX. for the rule Valuation class activated, with following example of settings
    Chart of Accounts -- INT
    Transaction key -- WRX
    Valuation Class G/L Account
    ------  191000
    3000 191100
    3200 191101
    4000 191200
    I Created a PO without material master with a material group say 007(services) to which valuation class 3200 is assigned in "Entry Aids Without material Master" in IMG.
    When i do the MIGO for this PO, following entries happen
    Cost center Db
    191000 Cr (this account belongs to blank valuation class and not 3200)
    now my question is Why the system is taking the blank valuation class for this posting and not valuation class 3200 when i have mentioned valuation class 3200 against the materials group mentioned in the PO
    Thanks a lot in advance
    Regards
    Jayesh

    There are more than 100 discussions already exist in SCN about why system is taking G/L account (WRX transaction event key) which is assigned with blank valuation class for that PO which hasn't any material master (Service PO).
    You have pointed the "Entry Aids Without material Master" in IMG, However this is different. Read the document  Automatic Account Determination for without material master.
    Here you will find how the IMG path works.

  • Split valuation: different revenue accounts for different valuation type

    Dear all,
    is there any possibility to manage different revenue accounts for material with different valuation types?
    I mean if I activate split valuation for a material which has two valuation type: purchase and production accounting department of my company wants to differentiate not only the cost of goods sold in delivery note but also revenue accounts when I release the billing document.
    I appreciate any contribute by you.
    Thanks in advance
    Vir

    I don't think so Vir if that's possible!!
    Do let me know if you find any solution for this.

  • Using Lockbox want to hit different GL account for each payment

    Hi Everyone,
    Currently, we have lockbox up and running for credit card payments from third party system and hitting cash account in Oracle.
    I want to implement one more payment mode for e.g. ACH, which will hit differed revenue account in Oracle.
    1. Now, as the current lockbox is hitting cash, I didn't left with any other option but I ended up setting up new lockbox with deffered revenue account attached to it. Here correct me if I am wrong with my understanding. Can one lockbox hit different GL account for different payment mode like Cash account for Credit Card and Differed Revenue account for ACH?
    2. With my assumption from point 1 that I have to create new one for different GL account, I created new lockbox and added lockbox number in transmission format, control file and in data file. After that launched lockbox program for each lockbox number with understanding that each lockbox program will pick up its own payment records based on lockbox nubmer in datafile and process it. But what happened is that first lockbox program processed its own record and also another lockbox number records and finally, its processed its own way of hitting cash account. So again payments hit cash accounts, where my expectation was that each lockbox will pick up its own lockbox number record and hit it to respective GL account i.e. cash and deffered revenue.
    Why one lockbox processed another lockbox number records also from same file?
    How to achieve this? I dont want to make two seperate data file for each lockbox number, but want to process from one single data file.
    Please update me ASAP as I need to freeze the requirement at the earliest.

    I suggest you to create a Dummy Materials. Lets say,
    material number: 1001
    enter material description as Domestic
    material number: 1002
    enter material description as Imports
    and in OBYC for GBB
    make the following settings:
    val grp      gen mod    val cla      gl a/c dr     gl a/c cr
    0001     VBR     4000     74180040     74180040
    0001     VBR     4001     78020091     78020091
    so that when u create PO u can get default GL (consumption GL )  for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
    val grp   val cla    gl a/c dr   gl a/c cr
    0001      4000     123456     123456
    0001      4001     456789     456789
    Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
    hope this helps

  • Determination of Different GL account for PGI (VL01n)

    We have a requirement wherein the customer needs to determine different GL accounts for PGI.
    Following is the  example.
    We need different financial entries for different customers at the time of  PGI (vl01n)
    Scenario 1) Intercompany sales process
                         Debit     1551000 -  Cost of goods sold - Inter-company
                         Credit    6031000 - Stock FG&R
    Scenario 2) Normal sales process (e.g Export)
                          Debit    1510000   Standard COGS
                          Credit   6031000 - Stock FG&R
    Note:- We are using same material for both process.
    Regards
    Amit

    Try as mentioned,
    You can have different movement type,for intercomapany sales,create new movement type  for example - 901 link it with
    a diff. schedule line category.
    For normal sales you can use movment type - 601 link it with schedule line category - 'CP'
    Other settings were done in OBYC,
    for stock account trans. key(BSX) for combination valuation group code,modification key,valuation class,
    assign debit,credit g/l accounts.
    Similary for COGS account trans. key is GBB,do configuration for above combination.

  • How do I set up different icloud accounts for each family member and make them able to access them on our common mac using their user name on the mac.  I am doing this to make sure kids don't get access to our messages.

    We have several apple products in the family.  I would like to set up different icloud accounts for each memeber.  I lately noticed having activated different devices with same icloud account that each device can access everyones messages by going in their settings and clicking which number or email they want to use to see messages.  Let me make sure I am understood, on my sons ipod in his messages settings he can switch to my cell number and see all my messages.  Re setting the devices isn't my great issue but can i set up each kids user account on my mac to their individual icloud accounts?
    Thanks!

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

  • Why we use different clearing account for GR/IR and planned cost clearing a

    My client ask for using same account for GR/IR account and all planned cost clearing account.
    i try to convince it should be different accounts but he needs a logical answer.
    Why we use different clearing account for GR/IR and planned cost clearing accounts?

    Dear friend.
    u just tell him while doing GR it will debited n  while doing IR it should get credited.hence we  need to take diff G/L account or same account.
    regds
    nasir

  • HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Maybe you are looking for