Different logon pages for same server.

hi Expert,
I have created two different logon pages with different URL's for the same server, now i can use both the pages to logon in to the system.
what i need to do now is :-
URL "A"  users set ="A"
URL "B"  users set ="B"
If we have the above two different URL and respective users for those URLs.
Now if i am User from the User set "A"  and try to Login by using URL "B".
I am able to login, but i want to restrict.
ie.
users from set ="A" login only by the link URL "A" 
users from set ="B" login only by the link URL "B" 
Points would be given to helpful answers.
Regards,
Sanjyoti.

Hi Sanjyoti,
I am not sure if this would work, but if time permits then do try this.
User A -- URL A
User B -- URL B
Now make User A a part of Group A, and set conditions in code that Group A can logon only through URL A and User B can logon through URL B.
Then in code check the association user - group and group - url and accordingly allow / disallow the user to go ahead.
This is just a thought.....do tell me if this works.....or if it doesnt then do post the solution you use....
Thanks,
GLM
P.S: PLEASE CLOSE THE THREAD IF THE ISSUE HAS BEEN RESOLVED
Edited by: GLM on Aug 27, 2008 2:08 PM

Similar Messages

  • How to set two different logon pages for a portal

    Hi experts,
      I have 2 different URLs for the same portal.
      i am trying to set up 2 different logon pages for these two.
      How to achieve this . Could u please tell me which files i have to change  inside the logon par .
    Thanks in  advance,
        John

    John,
    Please check this threads,
    Logon Page Customization Based on URL
    Two Urls for the same portal server
    Ram

  • Different portal logon pages with same url.

    Hi all,
    Im doing portal logon page customization . My requirement is when a user give the portal link in his browser he should get the portal logon page according to the country language..for example if he opens the portal from india he should get English text and if he opens the portal from japan he should get the japanese text in the portal logon page.
    thanks
    Rajeev B

    Rajeev,
    Its possible to have the different logon pages for the same portal.
    Its also possible for the same ulr but different parameters.
    You can do customization on portal logon page.
    For example:
    Consider that the url http://myep:50000/irj/portal is currently using to access the portal.
    You can pass addintional parameter on this url and fetch them into logon page, display the pages based on the values that you have fetched.
    for example http://myep:50000/irj/portal/myparam
    Have a lot at this link,
    Displaying Different Login Pages Based On The Sales Organization
    Ram

  • Can you run multiple APEX listeners for different instances on the same server

    Please confirm that we can run multiple APEX listeners for different instances on the same server?  Is it an xml setup configuration or do we need to do more??
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

    Yes.. Just exactly what I was looking for...
    Thanks Jari!!
    Thank You,
    Tony Miller
    SmartDog Services
    Austin, TX

  • How to create a Dynamic Logon pages for a portal.

    Hi all ,
    Is it possible to create a dynamic logon pages for a portal.My requirement is when ever we enter the Portal url in the browser we will get logon page ..now when we reenter the Portal link the logon page should change. is it possible .
    thanks
    Rajeev.

    Hi Rajeev,
    Your requirement isn't very clear here.
    Do you meant that is userA is trying to logon, he must see different logon pages at different tims he tries to logon?
    Thanks  Hermann, I too was thinking about the same...just need to have some clarity on what really needs to be achieved.  Also unless the whole logon page needs to be different then cookies are best -- if its just some images then some javascript would be good enough.
    Thanks,
    GLM
    Edited by: GLM on Sep 26, 2008 12:11 PM

  • Multiple logon Page for single portal.

    Hi Experts,
    I am trying to have two logon pages for the same portal with diffrent URL
    eg:-   url-http://SALES-A.company.com/portal
                 http://SALES-A.company.com/portal 
    The code i have used is
    <%
    String strReqURL = request.getRequestURL().toString()==null?"" :
    request.getRequestURL().toString() ;
    //String strReqURL = " http://SALES-A.company.com/portal ";
    int iSlash = strReqURL.indexOf("//") ;
    int iDot = strReqURL.indexOf(".") ;
    System.out.println("iSlash: "+iSlash);
    System.out.println("iDot: "+iDot);
    * out-put for the below substr is '//SALES-A'.Check with this to switch
    between
    * the TWO LOGIN pages. One for the SALES-A Portal and other for the SALES-B.
    strReqURL = strReqURL.substring(iSlash+2,iDot) ;
    System.out.println("strReqURL: "+strReqURL);
    * Sample URL : " http://SALES-A.company.com/portal "
    if ( strReqURL != null && strReqURL.toUpperCase().startsWith( "retepdev") )
    System.out.println("Inside if of strReqURL");
    %> <jsp:forward page="/umLogonPageA.jsp"/>
    <% } else { %>
    <%
    System.out.println("Inside else of strReqURL");
    %>
    <jsp:forward page="/umLogonPageB.jsp"/>
    <%
    %>
    This does not display anything but a blank page.
    Please help its really very urgent.
    Points would be awarded to helpful answers.
    Regards,
    Sanjyoti.

    hi All,
    the problem is solved.
    Thank you for reading my query.
    Regards,
    Sanjyoti.

  • Modify logon page for Standalone Application

    Hi,
    I need to modify logon page for a standalone web dynpro application ( not in enterprise Portal).
    I only find documentations for change it in EP, but nothing about standalone application.
    Some ideas?
    Thanks
    Andrea

    Hi Andrea,
             you can modify the design of the WD appln using the properties that is listed for each UI elements.
             You can also change the layout of the root container Element properties to Matrix layout to satisfy ur kind of design.
            For displaying different lanuages in a dropdown box.
    1) select DropdownbyKey UI Element.
    2) set this to context attribute.
    3) Go to Dictionary -- Local dictionary -- simple type --create new simple type.
    4) In the datatype select the Enumeration tab and give the different text and values.(In ur case give ur different type of languages.)
    5) Go to WD appln. select the attribute that u hav created and change its type to the corresponding simple type.
    6) select dictionary simple type>Local dictionary>package that u hav declared-->inside that select ur simple type and execute it.
    Hope this one satisfies ur query.
    Regards,
    Nagarajan.

  • Can we have two different logon screen for the Portal

    Can we have two different logon screens for the Portal?
    We should split the Logon application in two different applications:
    Login # 1
    should be read a DataSource.XML reading the Active Directory (Microsoft), to read-only the profiles from the AD, and block some IP address range.
    Login # 2
    should be read a DataSource.XML reading the Portal user only
    Is this possible?

    Hello Developer,
    Did you find an answer to this problem. I also have a similar issue at hand and am wondering if anybody has a solution for this.
    Thanks, Akhilesh

  • Edit The Logon Page for anonymous user

    HIII frnds.
    I am working on concept of anonymous user. For this I have created a Anon user group and it is working succesfully . Now i have to design a  Logon page for this group of users.
    Pls anybody help me out , becoz i have no idea that  how to edit a logon page for a particular user .
    Thanks in advance
    regards,
    Mayank Saxena

    Hi
    The portal provides a form of anonymous logon with u2018namedu2019 anonymous users. Named anonymous users are users that exist either in the user data store or as service users. You configure the names of these users in the UME properties. These users are automatically assigned to the group Anonymous Users. You can assign roles containing anonymous content to the users individually or to the group Anonymous Users.
    Here is the reference link request you to go tru:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/cd/1aad4abcb98c4597f9e395a6b62f43/frameset.htm
    Here is the link for Configuring Anonymous Logon with Named Anonymous Users:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/cd/1aad4abcb98c4597f9e395a6b62f43/frameset.htm
    Rajnikanth

  • Quality info records: different pack configurations for same raw material

    how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
    thanks
    Alisa

    You need to use the MPN profile functionality that is a standard part of SAP.
    In Config under the purchasing define the MPN profile.  There are several options you can turn on/off including info records.
    You assign the MPN profile to your material. It now is considered by SAP to be an internal material number. 
    You then create a HERS material type for each separate manufacturer material number you have.  You only need the purchasing view for these materials.  You can also create purchasing text views, classification and some others if you wish.
    In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
    You create a Q-info record for each manufacturer/HERS material combination.
    Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material.  When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
    When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot.  The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
    Take a look at it and research it.  It's not hard to set up.
    FF

  • Are there different licensing schemes for WebLogic Server?

    Is there different licensing schemes for WebLogic server?
    For example,
    Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and BIP?
    Is there a licensing scheme to purchase a runtime WLS license so we can run only ADF and Oracle Reports?
    Edited by: 957072 on Jan 28, 2013 5:43 AM

    Please go through below metalink id for weblogic licensing.
    Master Note on WebLogic Server (WLS) Licensing and License Files [ID 1076283.1]
    Thanks,
    Kishore

  • Can we have different output types for same document?

    Hi,
    Can we have different output types for same doucument.if yes plz describe the steps to perform it
    Thanks

    Hi,
    Generally you can use same out put type for the different document types of PO. You can create different out put types for the same PO, in case you need different layouts that is different forms like MEDRUCK. Please refer below link to create out types . If you want that PO as fax or e-mail can use same out put type .Thanking you.
    http://www.sap-img.com/materials/purchasing-tips.htm

  • Is it possible to have 2 instances with the same name but different edition in the same server?

    Hi everybody!
    I have in a little trouble ....
    *** Scenario.
    Oracle Enterprise Edition 11gr2 over Oracle Solaris 11
    3 instances: PROD, QA, DEV
    1 ASM instance
    Listener ports: 1520, 1530 & 1540
               Those are production system
    *** The problem:
    Customer can't pay Oracle EE, they want to change to Oracle Std One
    Limitations:
    I cant have a similar system to test.
    *** My idea:
    Install Oracle Std One, in the same path:
    /u01/app/oracle/product/11.2.0/db          <-- EE
    /u01/app/oracle/product/11.2.0/db_one   <-- Std Ed One
    ASM:
    /u01/app/11.2.0/grid          <-- EE                    +ASM
    /u01/app/11.2.0/grid_one   <-- Std Ed One        +ASM1
    Create databases:
    Asign similar disks to +ASM1
    Create DGs on +ASM1
    Create databases: PROD, QA, DEV for Std Ed one
    - is it posible that they have same instance name?
    - if not, i suppose create as: PROD1, QA1, DEV1
    Configure Listener port : 1521, 1531 & 1541
    Migration technique:
    Create Tablespaces, schemas
    Lock users in EE
    down listener: 1520, 1530 & 1540
    Import data of final users in a window maintanance
    configure and up listener: 1521, 1531 & 1541
    Customer should test access and apps in new
    Please tell me if my Idea is reallistic, all comments are going to be very apreciated.

    sol.beach
    I suppose end customer use a port per database in order to separate in a logical way the access to the databases,
    i mean PROD, QA & DEV has the same users.
    Hemant K Chitale
    1. I've seen physical servers with 3 ASM instances: +ASM1, +ASM2, +ASM3
       on Solaris & Oracle 10g, I suppose is posible on 11g
    2. The sever has occupied 2  sockets (2 physical CPU), so I can use Oracle Standard Ed One.
    JohnWatson2
    Thanks for your comments.
    WadhahDaouehi
    1. - You cannot run two ASM instance simultaneously on one Server, but you can run many Oracle database simultaneously
          on the same server which they use the ASM as storage type.
      As a mentioned to  Hemant K Chitale, I've seen a system with several instances running
      About
         "you can run many Oracle database simultaneously on the same server which they use the ASM as storage type."
      I'm not sure if i can use the same ASM which is part of a current Enterprise Ed over the new installation with Oracle Std Ed One.
    2. - Why you want the same instance name?
    If it is about the service name, which has by default the same instance name, just you can create a different instance name
    and create the service name with the name that you wish.
    SQL> alter system set service_names='instance_name';
    Is a similar name, not the same
    PROD, QA & DEV
    PROD1, QA1 & DEV1
    I consider add "1" at the end to refer "Oracle Standar Ed One"
    But I agree with you, i can customize throught service_name.
    Regards,
    Abraham Mtz.

  • Is it possible to have different authentication mode for SQL Server Database Engine and corresponding SQL Server instance?

    Hi,
    I have installed the x64 SQL Server 2008 R2 Express with default settings and run MBSA 2.3 (using default settings too). It shows three SQL Server instances: MSSQL10_50.SQLEXPRESS, SQLEXPRESS and SQLEXPRESS (32-bit). For the first, authentication
    mode is Windows, for the rest two - mixed. Here https://social.msdn.microsoft.com/Forums/sqlserver/en-US/03e470dc-874d-476d-849b-c805acf5b24d/sql-mbsa-question-on-folder-permission?forum=sqlsecurity question
    about such multiple instances was asked and the answer is that "MSSQL10.TEST_DB
    is the instance ID for the SQL Server Database Engine of the instance, TEST_DB", so in my case, it seems that MSSQL10_50.SQLEXPRESS is the instance ID for SQL Server Database Engine  of the SQLEXPRESS instance.
    I have two questions:
    1) How can it be that SQL Server DB Engine instance has different authentication mode than corresponding SQL Server Instance?
    2) Why 32-bit instance reported although I installed only 64-bit version?
    Also, this https://social.technet.microsoft.com/Forums/security/en-US/6b12c019-eaf0-402c-ab40-51d31dce968f/mbsa-23-reporting-sql-32bt-instance-is-running-in-mixed-mode-when-it-is-set-to-integrated?forum=MBSA question seems to be related to this
    issue, but there is no answer :(.
    Upd: Tried on clean Windows 8 installation and Windows 7 with the same result.

      Because I DO NOT want the three people who will be having access to the production SQL Server to also have access to the primary host ProductionA.  Since I have to allow them to RDC into the box to manage the SQL Server, I figure why not create
    a separate VM for each one of them and they can RDC into those instead.
    Does this make any sense?
    Any tips are greatly appreciated.  The main reason for doing this is because the three people who will be accessing the box, I need to isolate each one of them and at the same time keep them off of the primary ProductionA.
    Thanks for your help.
    M
    Hello M,
    Since you dont want the 3 guys to have access to Production machine A.You can install SQL Server client .By client i mean SQL server management studio(SSMS) on there local desktop and then create login for them in SQL Server.Open port on which your SQL server
    is running for three of the machines so that they can connct.Now with SSMS installed on each machine each can connect to SQL server from there own machine.
    I would also like you to be cautious with giving Sysadmin privilege to all three of them ,first please note down what task they would do and then decide what rights to be provided.
    Your option will also work but you need to create 3 VM for that .Which is more tedious task.
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • I want to install to different version on the same server

    Hi all,
    I want to install two different version of oracle on same server.
    and Both should work parallely without disturbing to each other.
    I know it is possible
    But while installing what preliminary precautions I willl have to take so that it won't disturbed other running database.
    waiting urgently for reply
    Pramod

    I would think as long as you set up separate staging areas for the two different versions that there should be no conflict. As always though - make sure you have good backups - maybe two.

Maybe you are looking for