Different Selection Options

Hi,
Can someone tell me the difference in these selection options?
1. 0 - Undefined Selection Options
2. 1 - Selection EQ Permitted
3. 2 - Selection BT Permitted
4. 3 - Selection EQ, BT Permitted
5. 7 - Selection EQ, BT, CP Permitted
Please explain.
Regards,
Ramon

Dear Raman,
1. 0 - Undefined Selection Options
If in ur Info package selection,,if u dont define any selection criterion....this option can be used..
2. 1 - Selection EQ Permitted
EQ= Equal
In ur info package selection..it is used to identify that particular value which u defined.
3. 2 - Selection BT Permitted
BT= Between.
In ur info package selection..it is used to identify that a rangeof values which u defined.
4. 3 - Selection EQ, BT Permitted
It is used to define both a particular value and also a range of values..
CP
You can specify model selections (l_t_range-option = 'CP'), such as ABC*, in the field From Valueas a single value. Note the following:
·        As a model, only use the character *.
·        Use the character * only once in the field From Value.
·        Use the character * only at the end of the value.
Hope this helps u..
Assign points if helpful...
Best Regards,
VVenkat..
Edited by: Venkata Narayana Jakkampudi on Apr 17, 2008 9:25 AM

Similar Messages

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

About select option

Hi experts,
In my alv report there is one field SERNR serial number, for this i have to put select option. My problem is this field doesn't exist in the table(Zmanifest) from where i'm fetching data. So i'm not able to mention this select option in my select query for that particular table. This field is existing in EQUI table and have no relation defined between zmanifest table & EQUI.
In my internal table i have all fields of zmanifest & this sernr; to fulfill this field logic is
Serial Number is combination of P_PREFIX-(dash)P_SERIAL fields in zmanifest. I have fetch all data including SERNR by above logic at my grid; but facing problem in defining SELECT-OPTIONS for Sernr.
Please help.
Points Sure.
Anshuman

Hi,
do like this.
take the lenght of P_PREFIX
take the lenght of P_SERIAL
add the length.
for exmaple :
P_PREFIX size is 4.
P_SERIAL size is 10
now declare the variable like this.
data : v_selop(15).
Note : 4101 = 15, so i declared the variable with lenght of 15.
select-options : so_field for v_selop.
now use off-set in your select query like this:
where PREFIX = v_selop+0(4)
   and SERIAL = v_selop+5(10)
it will work if you are using variable v_selop as a parameter else if you are using select option you have to break v_selop into two different select option like this:
s_prefix type prefix,
s_serial type serial.
loop at v_selop.
s_prefix-* = v_selop-. "      ( = sign, option)
s_serial-* = v_selop-*.
s_prefix-low = v_selop-low+0(4).
s_serial-low = v_selop-low+5(10).
s_prefix-high = v_selop-high+0(4).
s_serial-high = v_selop-high+5(10).
endloop.
now use following select query
where PREFIX in s_prefix
   and SERIAL in s_serial.
it will surely wrok.
Regards-
Gagan Kumar
Plz Reward if need full. also close the question.
Edited by: Gagan Kumar on May 18, 2008 7:30 PM

Can we hide the select-option in a selection screen

Hi all,
I have two radio buttons in my selection screen with 1 select-option criteria, now on choosing the other radio button I want that a different select-option criteria should appears.
Thanks

hi kunal check the code below.
TABLES : SSCRFIELDS,MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
PARAMETERS : R1 RADIOBUTTON GROUP RB1 DEFAULT 'X',
R2 RADIOBUTTON GROUP RB1,
R3 RADIOBUTTON GROUP RB1,
R4 RADIOBUTTON GROUP RB1.
SELECTION-SCREEN PUSHBUTTON /10(20) FRST USER-COMMAND FRST.
SELECTION-SCREEN PUSHBUTTON /10(20) SCND USER-COMMAND SCND.
SELECTION-SCREEN END OF BLOCK B1.
DATA : ACTIVE1 VALUE '1',
ACTIVE2 VALUE '1'.
initialization.
move 'frst' to frst.
move 'scnd' to scnd.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'R1' OR SCREEN-NAME = 'R2' .
SCREEN-INVISIBLE = ACTIVE1.
screen-output = '1'.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'R3' OR SCREEN-NAME = 'R4' .
SCREEN-INVISIBLE = ACTIVE2.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'FRST'.
ACTIVE1 = '0'.
ACTIVE2 = '1'.
WHEN 'SCND'.
ACTIVE2 = '0'.
ACTIVE1 = '1'.
ENDCASE.

SQD3 select options not fetching all the data?

Hi abapers,
standard SDQ3 tcode is not fetching all the data?
In this standard t.code how to find that for different Select-options, different data retrieval queries have been written?
where to find the select options conditions are written?
thans in advance

This could be an issue as ROWTERMINATOR and FIELDTERMINATOR are not well placed.
Use FORMAT FILE while using BULK INSERT.

How to get the data into select options if we have 10 select options

Hi Experts,
     I facing problem to get the data from diffrent tables and different select options.
I have to pass different parameter ranges.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: rb1 RADIOBUTTON GROUP g1.     "Existing Key Accounts
PARAMETERS: rb2 RADIOBUTTON GROUP g1.     "Potential Key Accounts
SELECT-OPTIONS: s_part FOR but000-partner."Business Partner Number
PARAMETERS: p_bpkind LIKE but000-bpkind.    "Business Partner Type
PARAMETERS: p_but000 LIKE but000-partner.   "Key Account Manager
SELECT-OPTIONS : s_vkont FOR fkkvkp-vkont. "Contract Account
SELECT-OPTIONS : s_ktokl FOR fkkvkp-ktokl. "Debtor Type
SELECT-OPTIONS : s_sparte FOR ever-sparte. "Division
SELECT-OPTIONS : s_vertra FOR ever-vertrag. "Contract
SELECT-OPTIONS : s_budat FOR erdk-budat.   "Invoice Date
SELECT-OPTIONS : s_netto FOR dberchv-nettobtr."Billing Amount
SELECT-OPTIONS : s_abrm FOR abc.               "Consumption Value
SELECTION-SCREEN: END OF BLOCK b1.
need response asap.
Thanking you.
Regards Surya Ramireddy

HI,
You can use as many Select-options in the select statment,
Select XXXX yyyy from TABLE where FIELD In S_FIELD1 and
FIELD2 In S_FIELD2.
Regards
Sudheer

My ipod nano will turn on and play but the viewing screen goes out and I cannot access the information to select different playing options. Any suggestions?

My ipod nano will turn on and play but the viewing screen will not come on and I cannot access the information to select different playing options. It glows white background light then goes dark for the entire time I am using it. Any suggestions?

I had the same problem. Someone here told me to make sure my earbuds were in securely. Push until they click in place. It solved the problem. The music still plays even though the screen goes to sleep. Hope this helps.

Select option in select list and navigate to different page

Hello,
I have a tabular form.One of the item is a select list with 2 options. Selecting option one should take the user to page10(just an example) and display all the values of that particular row. Similarly selecting option 2 should take the user to page 20 and display all the values of that row.
Can some one guide me how to do above mentioned job.
Thanks in advance.
Pravish

@Avinash
if f_cat-seltext_m = 'Select'.
    f_cat-col_pos = 1.
    f_cat-seltext_l = 'EDIT'.
    f_cat-Checkbox = 'X'.
    f_cat-EDIT = 'X'.
endif.
I am already passing f_cat-checkbox = 'X'.
Thanks
Kumar.

Reusing select option in different tabstrips of same view

Hi Experts,
I have a view. In this i have two tabstrips namely tab1 and tab2.
I have created one select option and i am using it twice inside (two fields- one for date and one for register no.) one view controller of tab1.
Now is it possible to use the same select option twice inside tab2. Note that here i have to create another view controller for tab2.
Can u plz explain in details.
Thanks in advance

Hi,
When you create the 2 viewcontainer Ui elements inside the 2tabs repsectively. Use the same instance of the Select options
in both tabs would throw the error that same instance of Selectoptions already exists.
You need to create the 2 select options instances, i mean Component usages to achieve the same.
Is this dynamic. I mean embeding view inside the view container of Window context is dynamic or static.
Regards,
Lekha.

Select-options in SELECT query - syntax error

Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
        catsdb.
INCLUDE ztime_cwtr_top.    " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr    AND
       workdate GE pn-begda     AND
       workdate LE pn-endda     AND
       status   IN ('20', '30') AND
       awart    IN so_awart .
      awart    IN ('1100', '1137', '1138', '1139', '1140',
                  '1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
Madhu

Solved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu

Select-options are not destroyed while calling view of used component popup

Hi Friends ,
I'm facing a unique problem. I'm calling a view of a component within another component. the view that I'm calling has some select-options. When I close the popup window ( using close 'X' of popup ) and then try to reopen the popup system give me a dump. I debugged and found that select-options are not destroyed by system and once it tries to create the select-options again it dumps because they are already there.
This is the source code extract of that dump for your reference .
1 method if_wd_select_options~add_selection_field.
2
3   data:
4     lr_table_descr       type ref to cl_abap_tabledescr,
5     lr_struct_descr      type ref to cl_abap_structdescr,
6     lr_value_field_descr type ref to cl_abap_elemdescr,
7     added_field          like line of mt_added_fields,
8     dfies                type dfies,
9     description          type string,
10     complex_restrictions type if_wd_select_options=>t_complex_restrictions.
11
12   field-symbols:
13     <it_result> type index table.
14
15 * check of someone wants to add a field that already exists
16   read table mt_fields
17        with key m_id = i_id
18        transporting no fields.
19   if sy-subrc = 0.
20 *   might be deleted - recreating a field with different setting is of course allowed
21     read table mt_all_removed_fields
22          with key table_line = i_id
23          transporting no fields.
24     if sy-subrc <> 0.
>>>       message x000(00).
26     endif.
27
28 *   remove the existing field in order to avoid duplicates
29     delete table mt_fields with table key m_id = i_id.
30   endif.
I've already tried using REMOVE_ALL_SEL_SCREEN_ITEMS( ) method of interface IF_WD_SELECT_OPTIONS before creating new elements ( select-options ). If any one can help me in this It would really help and I'll appreciate it.
Thanks in advance,
Laeeq

I've sloved the problem

[Help] Multiple Selection at Select Options.

People, I've coded following Select Options:
DATA: g_created TYPE zapomatxref-erdat,
            g_modif   TYPE zapomatxref-aedat,
            g_matnr   TYPE zapomatxref-pr1_material.
SELECT-OPTIONS: s_creat FOR g_created,
                               s_modif FOR g_modif,
                               s_matnr FOR g_matnr OBLIGATORY.
Thing is, when I execute the program and hit the Multiple Selection, an error pops up saying "Fill in all required fields".
I know it goes through PBO validating that OBLIGATORY so I can't enter the multiple selection screen.. But is there a way to enter the multiple selection screen without changing the OBLIGATORY adition ?
Thanks in advance.
PS: This is an executable program, not module pool. Also I want to enter Mutliple Selection screen without filling s_matnr.

Guys, solved the problem. You have to remove the OBLIGATORY addition and set the following code.
("Percentage symbol" below is the traditional percentage centessimal symbol we know, the mozilla wont let me insert it...)
TOP Include:
CONSTANTS: c_per002     TYPE c    VALUE '(percentage symbol)002'.
MAIN PROGRAM:
AT SELECTION-SCREEN ON s_matnr.
IF sy-ucomm NE c_per002.
    IF s_matnr[] IS INITIAL.
      MESSAGE e025(ycapo).
    ENDIF.
ENDIF.
START-OF-SELECTION.
PS: c_per002 comes to be the sy-ucomm value when hitting Multiple Selection Button at Selection Screen.. As any action validates the whole screen, you just set a clause when you don't want to validate if sy-ucomm not equals (different from) c_per002.

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

SELECT-OPTIONS Values via DYNP_VALUES_READ in a Search Help Exit

Hi all,
I appended a standard search help of a standard report with a search help of my own. Now I am trying to retrieve the values the user has entered into the selection screen of the report using the FM DYNP_VALUES_READ in my search help exit FM. It works fine for single values defined by PARAMETERS and for low and high values of SELECT-OPTIONS (so_example-LOW and so_example-HIGH), but I need the entire SELECT-OPTIONS table. I cannot make any changes in the report, so do you have any solutions I could implement in my search help exit FM?
Many thanks!
Vladan
P.S.
I found several questions on this topic but they either just different enough not to be applicable in my case or the formatting has made the replies useless.

Most of the time we just copy the standard FM F4IF_SHLP_EXIT_EXAMPLE to a new one and give our own name.
You can see that on the 12th line there is the following code
* EXIT immediately, if you do not want to handle this step
IF CALLCONTROL-STEP <> 'SELONE' AND
     CALLCONTROL-STEP <> 'SELECT' AND
     " AND SO ON
     CALLCONTROL-STEP <> 'DISP'.
     EXIT.
ENDIF.
you should comment those line in order for the control to reach the PRESEL step (which is already defined in the SH Exit FM) which is on line 44.
Most of the time, when someone says they don't hit PRESEL, this is the problem.
Edited by: ajithkpunnoose on Jan 5, 2012 12:00 PM

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

Different Selection Options

Similar Messages

Maybe you are looking for