Select option in select list and navigate to different page

Hello,
I have a tabular form.One of the item is a select list with 2 options. Selecting option one should take the user to page10(just an example) and display all the values of that particular row. Similarly selecting option 2 should take the user to page 20 and display all the values of that row.
Can some one guide me how to do above mentioned job.
Thanks in advance.
Pravish

@Avinash
if f_cat-seltext_m = 'Select'.
    f_cat-col_pos = 1.
    f_cat-seltext_l = 'EDIT'.
    f_cat-Checkbox = 'X'.
    f_cat-EDIT = 'X'.
endif.
I am already passing f_cat-checkbox = 'X'.
Thanks
Kumar.

Similar Messages

How to write text name of parameters / select options in ABAP list??

Hi gurus, i must read the text name of parameterd / select options in ABAP program and write it in a list of the same program for log.......how can i do it??
Thanks in advance!
Best regards!
Ferdinando
Message was edited by:
Ferdinando Sellitto

Hello Ferdinandino
Useful function modules are:
RS_PRINT_SELECTIONS
RS_LIST_SELECTION_TABLE (Generates list according to values in selection table(RSPARAMS))
RS_REFRESH_FROM_SELECTOPTIONS (Current contents of selection screen)
Function module RS_REFRESH_FROM_SELECTOPTIONS can provide the input for function module RS_LIST_SELECTION_TABLE.
Regards
Uwe

Select Options for my program and i need to get the code from coding wizard

Hi Experts,
i am new to Webdynpro programming.
i want to use Select-options in my component. and also please tell me how to use coding wizard,
Please let me know if you need any information.
Thanks in advance
Lava.

Hi Lava,
To create select options we have to use the existing component WDR_SELECT_OPTIONS.
For using this component in our WebDynpro component we need to specify this in used components tab in our WebDynpro component.
check the standard components WDR_TEST_SELECT_OPTIONS .
Also refer the following links.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60811d03-b69e-2b10-cd86-ad2790e44ecc]
Saptechnical->tutorials->webdynproabap->select options
Regards,
Radhika .

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Problem with table-indexes when using select-options in select

Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.:    SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.:   SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value:    eg: seltabA=      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'     etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA:      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '2'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
Marcel

Hi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
   0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5     1 RETURN
5     2 NLJOIN
5     3 [O] TBSCAN
5     4 SORT
5 TBSCAN GENROW
5     6 <i> FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM

Select-options on selection-screen type char100 problem

Hi friends! I created on selection-screen a select-options:
SELECT-OPTIONS: zzcduc FOR equi-ZZCDUC.
The field equi-ZZCDUC is a CHAR100 field. The problem is when I run program, in this field user can't input more of 46 characters. This is a serial number with 100 characters, why I can input 100 characters?
Thanks for any help.

Hi, this is copied from SELECT-OPTION documentation:
The LOW and HIGH fields of a selection option are displayed in a length up to 18 bytes long (scrollable up to 45 bytes). If you define a length longer than 45, fields are truncated on the selection screen after the 45th character. This affects the first line of the SELECT-OPTIONS table. You can, however, use SUBMIT to pass longer selection options to a report if they are specified with the addition NO-DISPLAY and thus do not appear on the selection screen. Without NO-DISPLAY, the fields are then truncated whenever the selection screen is processed in the background ( SUBMIT without VIA SELECTION-SCREEN).
regards,

Side by side select options in selection screen

Hai Gurus,
In a report, I need to place Period From and Period To date select-options in selection screen.
In one line (i.e side by side).
Appreciate your immediate response.
Thanks and Regards,
Kiran.

Thanks to all,
I got it.
my code here.
SELECTION-SCREEN: BEGIN OF BLOCK sel1 WITH FRAME TITLE text-sel.
PARAMETERS: SUMMARY AS CHECKBOX USER-COMMAND SUMMARY.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) text-pfr.
SELECT-OPTIONS: VALID_FR FOR ZZUTIL_RATE-VALID_FR MODIF ID RAM no intervals NO-EXTENSION. "changed
SELECTION-SCREEN COMMENT 30(13) text-pto.
SELECT-OPTIONS: VALID_TO FOR ZZUTIL_RATE-VALID_TO no intervals NO-EXTENSION. "changed
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK SEL1.

Clearing Select-Options in selection screen

Hello,
im having trouble clearing the select options in a selection screen.
i dont really know why, but if i run the program, and add REFRESH TABLE_RANGE[] (which was declared as a select-options) , it does clear the table in the debug, but shows it again on the screen.
i've tried CLEAR too, but it didnt really help.
is there a know solution?
thanks.

Hi,
There are two things associated with select-option one is header and other table
Try
CLEAR: TABLE_RANGE[] .
CLEAR TABLE_RANGE.
And are you sure your select-option name is TABLE_RANGE as I think only 8 character are allowed to name the selection screen field.
Regards,
Atish

PS:Copy of MBBS report with Date(GR) selection option in selection screen.

Hi,
We are developing a report, which is Copy of MBBS report, addition as Date(GR) selection option in selection screen to view historical data {i.e.Project Stock(Q) on back dates}.
MBBS is showing Project Stock w.r.t. WBS. So pls suggest Table, which can fulfill the requirement to show the Project Stock from GR w.r.t. Purchase and Production order in back date w.r.t. that WBS.
Pls do the needful.
Thanks,
Amit Jain.

Hi Amit ,
The Project Stock Table is MSPR , and the Project stock history table is MSPRH .
Though not through with your actual requirement , There is a standard Report MB5B -- Stock on Posting Date . In the selection screen , we can have the Special Stock Q (Project Stock ) .
If you can develop copying this report instead of MBBS , it would take care of receipts as well as issues ,and from the material Document you can build a relation to the account assignment WBS/Network Activity through MSEG Table .
Hope it helps .
thanks and regards
Kish

Length of select-options in selection screen.

Hi,
I was able to give the lemgth of select-options only upto 8 characters.
Select-options :S_Mtrial for mara-matnr.
But my requirement is I want total name which is more than 8 characters.
Select-options:Material_numberl for mara-matnr.
Can any one help how to do.
Thanks in advance.

The Statement...
Select-options :S_Mtrial for mara-matnr
The selection screen length depends on the type that you are assigning to it. Since the length of type
mara-matnr is less, the selection option S_Mtrial will be displayed with short length in the selection screen.
The alternate to do this is...
selection-screen begin of line.
selection-screen comment 2(10) text-001.
select-options : <ur select option name>
selection-screen end of line.
Text element,text-001 contains the select option text to be displayed in the screen
Hope it helps.

Select Option in ALV list

Hi Everyone,
I need a radiobutton on each line item on the alv output to select that specific line item. When you go into VL06D and display items there is a select option available beside the delivery number.I am trying to achieve something like this.I am not sure how to do this. Can anyone help me in this.
Thanks
Kumar.

@Avinash
if f_cat-seltext_m = 'Select'.
    f_cat-col_pos = 1.
    f_cat-seltext_l = 'EDIT'.
    f_cat-Checkbox = 'X'.
    f_cat-EDIT = 'X'.
endif.
I am already passing f_cat-checkbox = 'X'.
Thanks
Kumar.

Select options with out intervals and with extension in WebDynpro ABAP

Hi webdynpro experts,
I am with working with webdynpro select options.
Is there any way to hide selection screen intervals with extension same as ABAP?
Your input is appreicated.
Thanks
Rajesh Yadla

Hi Prabhu,
I have two radio buttons ex: R1 and R2 and three Fields Ex: Vendor, User Name and Password.
When I select R1 Vendor field should be Visible and when I select R2 Vendor field should be invisible.
I created one attribute of type WDUI_VISIBILITY and binded in Visbility property of Vendor field.
On action of R1 I am setting attribute value as Visible using Set_attribute method and On Action of R2 I am setting BLANK in Set_attribute method. But somehow I am unable get the solution......
Thanks
Basu

Select -options (fields as mandatory) and alv

Hi all,
i have 5 fields in select options and alv table , based on selection criteria values will display in alv table. now i want to make 2 fields as mandatory in select-options. without entering values in those two fields it should not allow the values to display iin alv table , it should rise a message..
(i have not created node for select-options ,i have directly used data type in wddoinit for select-options and for alv table i have created node)
thanks all

Hi,
In wddoinit while creating select options by ADD_SELECTION_FIELD method ,it has a parameter called I_OBLIGATORY. Set it as X and thus the field becomes mandatory.
Regards
Karthiheyan M

Creating a Select-option with no-intervals and a parameter on a single line

Hi
I have a unusual reqirment of creating a select-option with no intervals obligatory and a parameter on a single line. Is this possible? Can any one please provide me a solution for this. I reffered to the SAP help and what i found out is a single line can contain only parameters.

Hi,
humm,
I guess it's not possible on one line.
SORRY I've tried and it works!
Try this :
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME
TITLE text-s01 NO INTERVALS.
SELECTION-SCREEN begin of line.
PARAMETERS : p_gjahr LIKE bkpf-gjahr OBLIGATORY MEMORY ID gjr.
SELECT-OPTIONS : s_blart FOR bkpf-blart MODIF ID knt .
SELECTION-SCREEN end of line.
SELECTION-SCREEN END OF BLOCK main.
Regards,
erwan

Select option for selection valid and invalid data.

Hi All,
Any one pleas help in validating following case :-
In the selection screen there is a select option for equipment number like EQUI-EQUNR
if any user will give wrong equipment no. It will generate an error message from the range of equipment no.
and put it to an internal table it error.
and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
Iu2019d appreciate if some one help me in generation code for the above case or logic.
Thanks

Hi,
Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
      REFRESH RSPAR.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            CURR_REPORT           = 'prog name'
    IMPORTING
      SP                    =
          TABLES
            SELECTION_TABLE       = RSPAR
         EXCEPTIONS
           NOT_FOUND             = 1
           NO_REPORT             = 2
           OTHERS                = 3.
      IF SY-SUBRC <> 0.
   MESSAGE I000.
      ENDIF.
In table parameter you ll get the all entries entered .
Check out the values with respective tables.If value is not correct tk it into internal table
else proceed ahead. You can Remove incorrect entries this way.
regards,
ajit.

Select option in select list and navigate to different page

Similar Messages

Maybe you are looking for