Different shop variants / reg. customer doesn't work

Dear Experts,
we customized two different shop variants.
1) for switzerland with swiss francs and 7.6% VAT
2) for germany with euro and 19% VAT
Now we have following issue:
If we use an existing registered customer (original add in shop variant 1) for shop variant 2 we don't get in the basket prices.
In the basket and after the payment side all products are with the value 0.-.
If we use an new registered customer for shop variant 2 all prices are okay.
Now our questions:
It's possible that customers can shop in different variants? If yes what we need to do?
Thank you very much in advance for your help.
Kindest regards
Jannis

Dear Srinivas,
we use the B2C scenario.
Thanks
Jannis

Similar Messages

  • I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • "Make-to-Order Production with Variant Configuration (147)" doesn't work ..

    Hi, I'm trying to run through this scenario ) on the Cloud Showroom and clearly the document I have (147_BPP_EN_UK.doc dated Oct 2008) is out of date or at least out of sync with the system as configured u2018in the cloudu2019 u2026.. the necessary roles specified in the document are not available in the cloud and some of the transactions are not there, e.g. VL10I.
    But more infuriating is that the process just does seem to work, for instance from page 13 u2026.
    Item  7 ...
    "If a material variant can be determined on the Display Material Variant screen, select the configurable line item and choose Enter. In this case the previous configurable material number will be replaced by the new configurable variant that was created. For example, F1000-M1 will replace F1000 if Type of Material Material Metal and Type of Packaging Normal is selected."
    In my case Iu2019m not clear what the u201CDisplay Material Variant screenu201D is u2013 the previous instruction (Item 6) from the document says u201CWhen all of the configurable choices have been selected, choose   Back.u201C which takes you back to the document overview. Highlighting the line and pressing enter doesnu2019t do anything and there is no option to select the configurable line item that I can find so the expected material substitution doesnu2019t happenu2026.
    I've got a couple of screen scrapes that show the approriate variant material being specified and found (Characteristic Value Assignment) but there doesn't seem to be any way to attach to the forum. I have tried to double click the variant material on the Characteristic Value Assignment screen and also tried clicking clicking once and then 'entering' but neither method resulted in the necessary substitution (i.e. the overview screen still shows F1000 and not the variant material F1000-P1 that has been specified?
    Also the schedule line was confirmed as deliverable u2018todayu2019 even through there is not stock u2026 all very puzzling u2013 any help much appreciated.
    Regards.

    I found the answer to this myself - I was looking at out of date best practice documents on our server, the latest bast practive documents are written for EHP4 and therefore should work on the 'cloud'.

  • ''Shop on behalf' functionality doesn't work

    Hello,
    I am facing a problem with 'Shop on behalf' functionality.
    Using transaction BBPSC02 , I create a SC from  'describe requirement', i enter a user name in Goods Recipient.
    But  the user entered in field Goods Recipient can not retrieve the PO created from the SC in transaction BBPCF02.
    Is there an additional customizing to allow 'shop on behalf' functionality?
    Regards,
    Shaiek

    Hi
    Seems to be a SAP Basis Issue.
    Please attach the standard roles to the EBP user.
    SAP_EC_BBP_ADMINISTRATOR
    SAP_BBP_STAL_ADMINISTRATOR
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Ipod not recognized and Restore doesn't work

    i have an ipod classic 160 GB, with disk mode enabled. When i connect it to the mac mini, it calls up iTunes. but then the message comes up that ipod can't be recognized. So i have restored it (using the latest updates, by connecting to the net) and then synced. During ejecting the ipod too, the proper procedure has been followed. However, at the end of all of it (i have 10000+ items in iTunes and it takes a LOOONG time to sync), when i try to use the disconnected ipod, it shows 'No Music', 'No Playlists', no this, no that...
    I have also gone thru some other posts in this forum which suggested methods (such as getting ipod into disk mode and then connecting, trashing ipod software updates and reinstalling), to try to rectify the problem but there has been no difference And BTW, now i check, ipod shows 92 GB free (of the 160 GB). so what been copied, and where is it? or is the flash drive corrupted?
    Pls HELP, as I need the ipod and my music
    BTW, I think that this problem has become more pronounced since I installed the latest iTunes update (7.6.1)

    Try this...
    *Checking hard-drive for errors*
    Hold Menu+Select on the iPod for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Run *Disk Utility / Repair Disk* for the iPod. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore.
    Once you've restored your iPod don't rush to dump all the data back exactly as it was before. Complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos etc.
    tt2

  • ADVC100 Doesn't Work

    Hello,
    I recently purchased (on eBay) a Canopus ADVC100 Digital Convertor, however, I can't get it to work. I'm under the impression it should essentially plug and play in iMovie, but it doesn't and my Mac won't recognise the device.
    I've tried a couple of different FireWire cables, but that doesn't work.
    I'm running a mid-2010 iMac (upgraded to 12GB RAM), with Lion and iMovie 11.
    Any helps or thoughts would be appreciated.

    Hi,
    It's a Canon Video camera. Quite old but still working. The Mac isn't recognising the ADVC unit though. I'm connecting using the standard yellow and white wires.
    Regards

  • What do your charger has a turtle neck and doesn't work?

    It doesn't work I've tried different adapters but it still doesn't work.

    When it comes to the Lightning to USB connector, after a long while of charging over long periods of time, the cable will tend to get fold lines in it that resemble the looks of a turtle neck. This also comes with age of the charger and use.

  • [SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio

    EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
    Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed  the problem 100%.
    #### BEGIN ORIGINAL POST: ################################
    Hey guys,
    I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
    [Backstory]
    So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
    Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
    [/backstory]
    [tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
    Attempted solutions:
    [1]
    Extract, modify, recompile DSDT and include it with the kernel compilation .config options
    CONIFG_ACPI_CUSTOM_DSDT=y
    CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
    CONIFG_STANDALONE=n
    as suggested here, a page linked to by the arch wiki page on DSDT.
    I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
    [2]
    Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
    In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
    acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
    The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
    [3]
    The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
    Sep  13 11:51:03 localhost kernel: [   11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    Sep  13 11:51:03 localhost kernel: [   11.753434] ACPI: AC Adapter [ADP1] (on-line)
    The corresponding line now reads
    ACPI: AC Adapter [ADP1] (on-line)
    (The same goes for the battery BAT0)
    but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
    [4]
    The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
    This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
    When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
    Thanks to anyone who's read this far.  Please let me know if you have any ideas how to get my system to use a customized DSDT.
    Last edited by paraffin (2011-09-29 23:20:30)

    Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
    Anyway, so I tried another compile with
    CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
    Unfortunately it still didn't load the DSDT!
    I did catch a quick little error message that turned up in kernel.log though;
    /var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [    0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
    acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
    Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
    Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
    Anyway, thanks for your help and time:

  • Why custom logon error messages doesn't work in WAS 7.0, EP 7.0?

    I managed to get custom error messages in WAS 6.40 / EP 6.0.
    I'm using JAAS custom Login module for user authentication and from there different Login Exceptions are thrown.
    I have modified logon.par file to display different error messages like "Logon ID is empty", "Password is empty", "Your user ID or password could not be validated.  Please check and try again."
    When i copy the same code into my working environment i.e WAS 7.0 / EP 7.0, it doesn't work, message always was "User Authentication Failed". Do anyone knows the reason why i was like that?
    Can you please explain exactly when the custom login module gets executed after the user clicks on "Logon" Button.
    In logon.par file i have not seen any code to execute JAAS - custom logon module. PLease explain exact execution flow ..
    Thanks in advance ..
    MMK

    Your card reader might be finicky like mine. Figure out which device your card reader is at (from what I'm reading probably sdb), then attempt to mount /dev/sdb to any location. If your card reader is like mine, this mount will fail but you'll find you now magically have /dev/sdb1, /dev/sdb2, etc devices, which will successfully mount... oddness, but it "just works" so I'm happy
    Note that if you plug a card into a slot that is to the kernel, for example, /dev/sda2, then try to mount /dev/sda1, this will (obviously) fail, so be sure to try mounting all the devices that magically appear (if any do).
    -dav7

  • A mic doesn't work. Adobe Flash Player camera and microphone exceptions are different. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

    Hi,
    my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
    I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
    Policies>
         <InitialPhoneSelection>deskphone</InitialPhoneSelection>
    </Policies>
    I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
    Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
    Thanks a lot
    Pavel

    Hi Pavel,
    This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client)  and use it in subsequent logins.
    Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
    Thanks,
    Christos

  • I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

    I have different account ID's with my iphone and computer.
    I would like to standardize both to just the one.
    One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
    Is there an easy to fix this please, Fabfitz

    If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address.  This explains how: Change your Apple ID - Apple Support.
    If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address.  This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

  • Custom Windows 8.1 .WIM doesn't work via WDS, works OK manually

    Hello,
    I have a very peculiar situation; I've created a custom Windows 8.1 Enterprise x64 image, but when I deploy it using Windows Deployment Services on Windows Server 2012 R2, using the Windows 8.1 Enterprise x86 boot.wim as the Windows Deployment
    Services boot image, it deploys successfully, but malfunctions;
    it doesn't activate [against our KMS server]
    when a new user logs on, the process stalls; if you logoff then logon, Microsoft Office gives you a 1603 error.
    File Explorer [I think] doesn't work (apologies for vagueness; I absolutely
    wasn't expecting this and was somewhat floored by the symptoms)
    HOWEVER, if I manually deploy the SAME .WIM image, copy in the
    SAME unattend.xml, and manually replace %MACHINEDOMAIN% and %MACHINENAME% with the right values, it works fine.
    HOWEVER, I've already verified that Windows Deployment Services is working perfectly well because I've added the Windows 8.1 Enterprise x64 install.wim as an install image, and used the unattend.xml to automate it.  In other words, with the
    install.wim from the .ISO, everything is working fine, but with a custom image, it malfunctions.
    I don't know why it's malfunctioning; nothing looking like a root cause appears in any event logs. I have injected some drivers into my custom image, but these are for relatively obscure devices such as scanners and smart card readers, which
    aren't even on the computer I'm testing this on.  The test computer would benefit from
    chipset, video and network drivers, but the inbox ones work OK.  In any event, they work fine when I manually deploy.
    Have more-or-less replicated this on test machines that are virtual, desktop and laptop, so I have no reason to believe the target device is a factor.
    For now, Windows Deployment Services doesn't have a client unattend file.
    This is a very peculiar problem. My existing, production environment has
    Windows 7 Enterprise in a custom image
    Windows Server 2008 R2
    Windows Deployment Services
    working perfectly, and was looking to maintain the same approach, but simply update it.
    Would welcome your ideas.
    Kind regards,
    Anwar

    Hi,
    For this issue,I think it is related to the custom image.
    I suggest we don't add any drivers to the custom image to test it.
    Meanwhile,I  suggest you upload following logs here for further research. SkyDrive or similar network sharing would be better to use to share your files.
    C:\WINDOWS\PANTHER\setupact.log
    C:\WINDOWS\PANTHER\setuperr.log
    Regards,
    Kelvin hsu
    TechNet Community Support

  • HT201304 I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    Take it up with the app developer first. If they won't respond then you can take it up with iTunes support.
    http://www.apple.com/support/itunes/contact/

Maybe you are looking for