Difficulty controlling X-axis time display in auto-scale mode

Auto-scale mode is great in that I can zoom and pan and all the axes are updated, but the display of time is not very controlable. I specifically want the start and end time to always be displayed on the far right and left, and I want a decent number of subdivisions to always be displayed. In auto-scale mode non of this appears to be controllable. What can I do short of taking over control of all aspects of the chart scaling and axes control to get auto-scale behavior that is more reasonable?
Thank you,
Martin

Hopefully a picture is worth a thousand words..
I think this has something to do with Mode = AutoScaleLoose or something along those lines.
Attachments:
ni-chart1.JPG ‏53 KB
ni-chart2.JPG ‏61 KB

Similar Messages

  • N78 - No time display in power saver mode?

    I am really frustrated: i just bought the N78, and it's really good, but this little bit of detail is bugging me seriously!
    Is it really not present? Or is it that i cant find it?
    Solved!
    Go to Solution.

    It's not an issue that needs fixing, it is normal behaviour for the N78 and in line with it's predecessor the N73.
    On some models the display blanks completely to save battery power. The N78 and N73 both act in this way that is why those two models have blinking lights to show that they are on. Most models are made using different chipsets and don't go totally blank and display the time instead.
    Personally I prefer phones that go totally blank with a blinking LED than those that display the time.
    On the N78 all it takes is a short press of the power button to light the screen to see the clock when the keys are locked or any key when they aren't.

  • As an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

    as an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

    Parental Controls can be used to set time limits, to allow the computer to be used only within specific hours of the day, and to block certain Web sites (or to allow only certain Web sites). However, they can be applied to a Standard account only, not to an admin account.

  • How to control number of rows displayed in a report  by user?

    Hi All!
    I have provided a select list called 'Number of rows' in my report page.User can choose any number in the list, and accordingly he should be able to see so many number of rows in that report page.
    For example: if user selects 50 from the list, he will be able to see 50 records at a time out of say 2000 records retrieved. I want to control number of rows displayed per page dynamically. And if he selects 25 in the select list, he should be able to see 25 records at a time out of 2000.
    How to do it? Please give me ideas.
    Thanking in advance.
    Regards,
    Deepika.

    Hi Deepika,
    If you have a Select List with Submit called, say "P1_ROWS", you just enter P1_ROWS into the Report Attribute's "Number of Rows (Item)" setting.
    Regards
    Andy

  • One or more activex controls could not be displayed because either

    Hi.
    I don't know if this is the right forum for my problem.
    Anyway,
    I have a problem with my Windows Services.
    Each time when I launch Windows Services window, I get a warning:
    One or more activex controls could not be displayed because either:
    1. your current security settings prohibit running activex
    controls on this page, or
    2. you have blocked a publisher of one of the controls.
    as a result, the page may not display correctly.
    The warning pop-up opens only when I click on Extended tab.
    The problem has nothing to do with IE security, because I can open pages with ActiveX controls on them and so.
    I have installed Spybot spyware/malware removal tool. Then uninstalled it.
    I'm not sure if this is the cause of the problem. But I presume it is.
    So, may be someone was facing the same problem and knows the cause for it.
    Thanks.

    Unlike the rubbish that was stated before this post, this one works.  This is the solution and Jishnu is brilliant.  Thanks a million, friend.
    Try to follow the KB article (KB907343).
    1.     
    Click Start, click Run, type regedit, and then click OK.
    2.     
    Expand the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0
    3.     
    In the right pane, right-click 1200, and then click Modify.
    4.     
    In the Value data box, type either 1 or 0 to overwrite the existing value of 3. Then, click OK.
    Note If you type 1 in the Value data box, you will receive the following prompt when you start Microsoft Project:
    Do you want to allow software such as ActiveX controls and plug-ins to run?Additionally, you will receive this prompt at other times when you use Microsoft
    Project. If you do not want to receive this prompt, type 0 in the Value data box.
    The values 0, 1, and 3 are associated with the following behavior:
    0 = Enabled, or the action is permitted
    1 = Prompt
    3 = Disabled, or the action is not permitted
    5.     
    Quit Registry Editor.
    IF this does not works try to check the Internet Options..
    Try to reset the Internet Explorer.
    1. Click on
    Start & run.
    2. Type inetcpl.cpl & click
    ok
    3. Click on Advance Tab & click on
    Reset (Make sure to put the check mark on the delete the personal setting for IE8) then again
    reset.
    4. Click
    close.
    This should work.

  • One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

    hi All,
    i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
    two days all of a sudden we are recieving error as above.
    one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
    could anyone please help me on this.
    Thanks and Regards,
    krishnamurthy

    Hi,
    Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
    Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
    Click Start , click Run , type regedit , and then click OK
    Expand the following registry subkey
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
    Delete the extra (parasite) zone from the Zones subkey
    Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
    Close the registry editor
    Thanks!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I change the new iTunes play list total time display from 1.5 hours format to exact display of 1hr 31min 12sec.

    In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.

    Actually, that's the problem ... in iTunes *11* it has stopped working.  I have the status bar displayed, and it is stuck on the 1.x hours format.
    That is very, very strange !!
    I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
    I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ????

  • Apple Remote Desktop CANNOT observe/control/curtain 30" Cinema Display

    Apple Remote Desktop CANNOT observe/control/curtain 30" Cinema Display. All my other pc's (G4, G3, titanium, 17" Powerbooks and Macbooks) can be observed, using identical settings. i figured out that it may be the graphics card while trying to Microsoft Remote Desktop Connect to the Macbook running XP, the system crashed due to the (well known as really bad) ATI mobility XP drivers provided by bootcamp. So i quess the problem is the dual link in my G5 running on the 30". All the other remote desktop commands run fully ok. i just cannot get visual feed.
    Any thoughts??
    Thank you all in advance
    Dual G5, Dual G4, G3, 15" titanium, 17" Powerbook, 17" Macbook   Mac OS X (10.4.7)  

    I've had this problem, too, recently. I have two G5s running 30" displays, I'll describe my situation - it may come down to your video card.
    When I try to connect to one of the G5/30" on my network (a PowerMac 7,2, 512MB, running a GeForce6800 Ultra), it sporadically gives me the same non-visual problem you're having. But every now and then, I can connect, and can't figure out why. A lot of times in the ARD multi-observe window, it reports that this machine is maxing out the memory (98.7%, putting it in the red)
    However, when I try to connect to another G5/30" on the network (a PowerMac 7,3, 512MB running an ATI Radeon 800 XT), I DO get a visual.
    Maybe others know of known deficiencies in ARD/NVidia connections? Or maybe it has to do with the paltry RAM in the machine?
    Mark

  • Prolong backlit time display in iPod Classic

    Gentlefolk;
    The display on my iPod Classic defaults to current time and battery status. Perfect. But, to see the time, when I touch a control, the backlight comes on, then the song title displays, when all I really want to do is see the time.
    Is there a way I can change the length of time that the time can be displayed with the backlight on, before displaying the song info? I didn't see anything in SETTINGS that covers this function.
    Thx!

    I don't think there is any way to do what you are asking (and you're probably the first person to do so, most users complain about the clock) but you can have the time displaying on the *Title bar* - that's the top line where the battery icon is, but on the left side. It will alternate with the title of the current menu you are in and you cannot change the length of display time here either but...
    Go to *Settings/Date & Time/Time in title* and press the select (centre) button to On.
    Phil
    Message was edited by: the fiend

  • Display the auto forward address for all users

    Is there a transaction I can execute in ERP that will display the Auto Forward address for all users? I know that SO36 can be used to create an auto forward address for an individual user, however, I would like to list the auto forward address for all users

    According to the 2nd article - I've created an empty Company_Phone_Number_Normalization_Rules.txt file and placed it in the Lync file share, in order to avoid any suspicion that the built-in file might be used. I've updated the address book but unfortunately
    can't restart the FE services at this time. There's no still no change in the client.
    Yet - the problem here is the numbers shown aren't present in the files making up the Lync address book inside the local user's sip profile folder.

  • QT time display is erratic.

    I have been through two updates of QuickTime 7 since the time display by the scrubber has worked right.
    Each video starts as 00:00:00. Before long seconds digits begin to disappear, giving displays such as 00:00:0 or 00:02:5.
    I thought the latest update today would have a fix, but it's still happening.
    Thanks.
    G5 dual 2.0   Mac OS X (10.4.9)   QuickTime 7.1.6

    Have you already gone into the Time and Date settings and checked and unchecked boxes for network time and auto time zone?  It might just need a kick.

  • Using mission control/spaces on extended displays

    Is there a way to assign spaces and use mission control on an extended display (i.e. LCD TV) on 10.7.1?  I have connected an LCD TV as an external display to my MBP. When switching spaces on my MBP (primary) display, the external monitor transitions as well.  I have been unsuccessful utilizing multiple spaces strictly on my external display or having a static dispaly when switching spaces.  I would like to be able to switch spaces independently on each display or make a static desktop on my extended display.  Thanks
    Macbook Pro 13" Mid 2009
    2.26 GHz Core 2 Duo
    4GB DDR3 | NVIDIA GEFORCE 9400M 256 MB

    When I'm working with any other apps on my system, I can take advantage of Mission Control, but have forego these advantages when using the Creative Suite. Isn't it really about time that Adobe put some effort into supporting these OS-level features. Whether you favour Mac OS or Windows, you should be able to take advantages of the system you prefer to work on.
    Is there any word on whether CS6 will support these features? (I'm not exactly holding my breath).
    There is no word on anything about InDesign CS6 yet. (Those who know can't say, and I'm not aware of any substantive leaked information.)
    I think that Spaces/Mission Control support is probably predicated on the Carbon to Cocoa conversion. So until InDesign is a Cocoa app, this is unlikely to improve. Personally I manage to avoid using Spaces to any significant degree, so I don't really notice these things. Have you tried Photoshop, which is a Cocoa app? Does it behave better?
    I don't know to what extent these issues are specific to the app, or all tied up in libraries that are common to all the Adobe apps.

  • Floating Big SMPTE Time Display in Logic 8?

    Is it Possible to get a *Floating SMPTE/Run-Time* Display in Logic 8 that can be re-sized and repositioned? I know that the transport bar in LP8 can be detached, but I have never been able to re-size it. Both Pro Tools and Digital Performer has the capability to have a floating display of the SMPTE/Running time of the song/project which is very useful.
    Thanks in Advance

    Right click/control click on the SMPTE display in the transport window->menue opens->choose "open large SMPTE display" - a floating SMPTE window will open which can be resized by dragging the lower right of the display.

  • How to reset numbers in real time display in Cisco Supervisor Desktop?

    Hi all,
    I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
    Thank you.

    Joe,
    I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
    Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
    I guess I will have to try for myself.
    Regards,
    Geoff

  • Image time display discrepancies between product

    The following is an example of a problem I've observed in many places in my photo collection.
    I have two files taken 8 seconds apart in April 2009 with a Nikon D70 shooting .jpg format.  The files were subsequently imported from the camera memory card using a card reader and Photoshop Elements.  PSE was also used to add tags to these files.
    Since then I've acquired Photoshop CS 5 Extended.  The other day I was looking at these files in both PSE and Bridge.  PSE shows the time of these two files to be the same (as it should), however, it adds an hour to the actual time the image was taken to adjust for the difference between the time set in the camera (it was Pacific Time) and the time zone where my computer is now located (Mountain Time).  When I look at the time on the images in Bridge, one of them shows the correct time in Pacific Daylight Time, but the other is showing the corresponding UTC time value, 7 hours later than the local time.  Looking at the file list in Window Explorer shows the "Date" and "Date taken" values to be the same as that shown by Bridge.
    There were two other images taken shortly before the first one mentioned above and they show the correct local time.  The two files that followed the UTC timed file also show a UTC time value.  Then following that the next file shows local time and then there are a number of files showing UTC for time.
    If I look at the two files with Windows Notepad so that I can see some of the text strings in the exif data portion of the file, the first file has a couple different places where time is shown in the format "...hh:mm:ss-07:00" and the other in the format "...hh:mm:ssZ".  The time value is preceded by the date in yyyy:mm:dd format. It would appear that Bridge is reading these values and displaying them, while PSE is getting some other time value from the file. Here is the actual string from the file that displays in UTC:
         exif:DateTimeOriginal="2009-04-05T17:08:10Z"   exif:DateTimeDigitized="2009-04-05T17:08:10Z"
    and for the file that displays time in local time the string is:
         exif:DateTimeOriginal="2009-04-05T10:08:02-07:00"   exif:DateTimeDigitized="2009-04-05T10:08:02-07:00"
    I've observed this same discrepany with files taken more recently with a Nikon D700 and images in NEF format.  I think I can reasonably eliminate the possibility that this is a camera caused discrepancy.  I suspect that some program is actually reading the local time and offset, then writing that back to the file as a UTC time value.  The behaviors of PSE and Bridge seem to point to the fact that the two programs are extracting time from different fields / strings in the file.  At this point the occurrance of the problem seems random, at least I've not been able to discern a pattern and reproduce it at will.
    Although this is not a catastrophic problem, it does cause confusion.  I've also looked at these files in Lightroom, which on initial inspection appears to get the same time values as Bridge.  The down side of this is that files in Lightroom are sorted into time order, which may not be the order they were taken.  Although I recognize that these products may not have been design for complete compatibility, it sure would be nice if they all treated time in the same way.

    I believe I now have more information about how PSE works and therefore need to slightly correct my original post.  It looks like PSE takes what ever time it finds for the photo's "time taken," converts it to UTC, then converts it to the local time on which PSE is running.  That will explain why two images taken seconds apart, with on having time coded as local time plus UTC offset and the other having an absolute UTC time, display the time taken in local time.  On the other hand, Bridge (and Lightroom) just displays what ever time it finds in the file.

Maybe you are looking for