Digital Media Slot

I running Windows XP on an HP Pavilion zv6000 laptop . My digital media slot no longer recognizes the SD card when i insert it. The light above the slot blinks briefly and goes out. How can i fix this? I have not made any changes to the system that might cause this.

Hi,
From time to time the device may wear out but before we talk abouth the hardware, what is your SD card, same one or different one ? Can it read other cards say under 4GB or even 2GB ? 
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Digital media slot stop working

    I have a hp pavilion entertainment pc tx2500z windows 7 64bit, i was my digital media slot and it was working fine now it has just stop working. I have restarted the laptop tryed a different scan disk nonething works. Please help

    Is Digital media slot not reading any memory cards or any specific cards on the notebook. Also have you tried installing drivers for card reader from here
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • On my DV7 laptop the digital media slot wont detect any cards.

    The internal digital card reader does not detect a card.I have tried different cards. The cards do work fine if i use an extremal card reader. Iis this a driver problem or a hardware failure.  I have reloaded the drivers . I recently lost a microwave oven due to a lighting strike on my apartment building.
    Any suggestions or advice would be  greatly appreciated.

    Hi @FrankIvie60 , 
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7 Notebook and having an issue with the card reader. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices. This will give the Notebook a fresh look at the USB devices when you connect them.
    Here is a document on troubleshooting Memory Card readers for Windows 8.
    Here is a document on troubleshooting the USB devices. The section that might help the most is USB device not dectected.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How can I test the digital media card reader?

    New notebook DV6-6B58SA digital media slot is not responding to plug in memory DUO SD card.
    The SD has successfully downloaded via the USB.
    The PMB has been successfully updated to ver.5.8.02,
    Are there any diagnostics to test the SD reader slot.?
    I remember that Realteck (?) softwaredriver upgrades failed until tech. support recommended uninstall and reinstall.

    Hi Allan
    I have tried ten different makes of card and they are all the same. Even tried a brand new one straight out of the packet. That did not work. All the cards work with my wifes old windows laptop.
    Chris

  • Welcome to the Cisco Networking Professionals Digital Media System topic

    Welcome to the Cisco Networking Professionals Digital Media System topic. This forum will provide you the opportunity to discuss topics such as digital signage, Enterprise TV, and desktop video solutions. We encourage everyone to share their knowledge and start conversations about challenges you might be facing.
    Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
    We encourage you to tell your fellow colleagues about the site.
    Dan Bruhn
    NetPro Community Manager

    You are not alone in your opinion. The DMD is pretty clunky and useless. We gave up trying to use it. We code our apps with HTML and Javascript. You are correct in thinking that it seems Cisco pushed DMS out the door before it was really ready for market. That was my opinion also. I guess they had their reasons. I've seen the roadmap for the product so I am of the belief that in a few years they will have surpassed most of their competitors and worked out the issues.
    5.0 released today. Upgrades will not be available until the end of the month. You can check out the new features on the Cisco website. Its a complete re-design of the GUI. We shall see just how much a step forward it is for the product set.

  • How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

    How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?  I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network.  Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

    Sorry it's all done through iTunes.
    The following article(s) may help you with home sharing.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • How do I covert downloaded (on MacBook Air) media files to play on a western digital media player?

    Would be great if someone could give me a hand, very frustrated!
    Anything I have downloaded on my MacBook Air I have not been able to put on my Western Digital Media Player.  The media player is recognised when it's plugged in to the Mac but I'm not given the ability to move any files or place any new files on the media player.
    I have also tried saving movie files to a USB and then tried using my work PC to place them on the media player, this works - but the file format won't play.
    Thanks!

    http://store.apple.com/us/product/MD564ZM/A
    You also need to determine what kind of DVDs your player supports.  My player will play discs with image files on it.  Some players will even play files in mp4 format.  If yours will only strictly play DVDs in DVD format then you have to author them with a tool such as iDVD (no longer sold).
    If you are playing these at home you might see if you can ouptu video straight to the video device from your MBA.

  • HT201335 How can i hook up an ipad 3 with a 3M Digital media system (DLP) projector series 800?

    I am a teacher trying to hook up my iPad 3 to my 3M digital Media System Series 800 (DLP projector).  I plug in everything, see the little apple on my 3M screen and then It goes blue and says the input format is not supported.  Has anyone else tried to do the same thing and can give me some help? I'm trying to use mortechnology with the kids but our 3M is giving me fits of rage.  I have an apple tv hooked up to an HDMI to Component converter box.  PLEASE HELP!!!!

    Sorry, the 2ndlink should be...
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
    Fully Mac OS X supported with with on-screen
    menu set-up and full user manual.                   
    http://eshop.macsales.com/item/Asus/USBN10/
    OS Support Mac 10.4/10.5/10.6
    I don't have those exact models, but have seen others here use them.

  • Digital media card reader

    hi 
    when i using digital media crad ,it says very slow response and called not not responding and after 2-3 min its ok  and i if i try to move another picture it say the same . i m very fed up to hp pavillion g6 1159 laptop  , 
    pls tell me if any solution of this problum, i have another laptop dell 17r its ok with digital media card and work very very fast
    but this pavillion g6 laptop ,i cant say, i give number  for this laptop 0 because the hardware is not good
    pls sorry to say , very bad laptop,for spend £439 . its price just £ 150 

    Hi,
    There is no such "PCMCIA express card" card.
    You can find something like these on the market. But this option may be more expensive than buying a new TV tuner now.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Bespoke Digital Media: How can i share files between my iPhone5 and other company phones ?

    hi
    I am from Bespoke Digital Media. I wants to share files between iPhone5 and Samsung galaxy S4. How should i do this? Kindly help me.
    Thanks
    Aan Rai

    Not sure what type of files you are trying to share, but you can't use Bluetooth.
    Emails/text the files to each device.

  • ITunes and Digital Media Center?

    I am looking for a Digital Media Center as a replacement for my CD Juke Box that can organize music, photos, videos, etc - has anyone done that - or is there a manufacturer that makes one available? Everything that I have found runs Windows Media Center which I am very unhappy with. Want something that I can transfer all my media to but using iTiunes rather than the Windows system??? Anybody have suggestion??

    unanswered

  • How do I copy music files in Apple Lossless format on to a flash drive so I can play on a digital media player.

    I have an iMac 21", running on OS X Yosemite 10.10.2, processor is 2.7GHz Intel Core i%, Memory 8GB 1333MHz.
    I would like to copy some of my iTunes music in Apple Lossless or AIFF to a flash drive which I would like to insert into a digital media player in my home Hi Fi system. How do I copy the files in these formats. Thank you.

    Drag the song files there, either from the iTunes application window or the iTunes Media folder in the Finder.
    (125190)

  • Phantom Joystick or M$ "Digital Media" Keyboard !? [solved]

    Hi,
    Over the past couple of days I've been trying to get a python pygame based game to work. Currently I've had to disable the joystick code in the game to prevent the character relentlessly moving north-west across the screen.
    As I don't have a joystick I assumed the game code logic to be faulty in it's handling of non-existent joysticks. However I have since tried an update for another game and discovered the character relentlessly runs around in anticlockwise circles and then remembered this happened the last time I tried that game some time last year (IIRC).
    The python game spits out "SDL_JoystickGetAxis value:-32767".
    using jstest (from joyutils) on /dev/input/js0 says: 
    Joystick (Microsoft Microsoft® Digital Media Keyboard) has 37 axes and 57 buttons. Driver version is 2.1.0.
    jstest also reveals the same numerical value as the SDL message above.
    While playing either of the games, unplugging the keyboard and/or mouse has no effect on the relentless movement.
    I'm only a very casual gamer so haven't found this behaviour elsewhere. The two games I've found to be effected are E.S.P Hadouken, and, Tiny And Big (demo). Games I've found to behave themselves are Minecraft, and OpenRA.
    What other tools/utils/diagnostics could I try to pinpoint the problem?
    Cheers,
    James.
    Last edited by jwm-art (2012-06-21 23:31:27)

    Hi,
    there are two launchpad bugs, the comments say it's a kernel thing:
    https://bugs.launchpad.net/ubuntu/+sour … bug/987622
    https://bugs.launchpad.net/ubuntu/+sour … bug/987877
    I worked around it by making the corresponding js* devices have permissions 0000.
    In /usr/lib/udev/rules.d/52-ms-keyboard.rules:
    SUBSYSTEM=="input", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="0745", KERNEL=="js[0-9]*", MODE="0000"
    your idProduct is probably different.
    $ udevadm info --query=all --name=/input/js0
    P: /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/input/input56/js0
    N: input/js0
    E: ID_MODEL_ID=0745
    This should show your idProduct as ID_MODEL_ID.
    $ lsusb
    Bus 002 Device 015: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
    Here it's the id part after the ":"
    Unplugging and replugging the keyboard should have udev run the new rule.
    does that work for you?

  • Sony Digital Media Port TDM-iP50 will it work with iPhone 4

    Just wondering as SJ stated that a new dock would be needed with iPhone 4
    would the Digital Media Port Sony TDM-iP50 still work ?
    As this presently does with my 3GS

    pennbank wrote:
    Can I just confirm that The New iphone 4 does not work with the TDM-iP50
    (I have iPhone 3GS with operating system 4 installed which works on my TDM-iP50)
    I would like to upgrade to the new iPhone but will not if it means my media port will not work.
    I was afraid that my TDM-ip50 cradle from Sony would not work with the iPhone 4 because that's what I read somewhere online and it's even what Sony told me when I called them. I was pleasantly surprised, however, when I got my iPhone 4 to find that it works just fine as it did with my 3GS. I guess Sony hadn't yet tested the cradle with iPhone 4 so they didn't want to say it would work.
    The iPhone 4 can be hooked to TVs with the Apple Component Cable or Composite Cable instead of a cradle, but you won't have the remote control you do with the TDM-ip50. Well, at least I have remote control using the remote from y Sony Home theater system. Make sure you get the correct cable, read about both of them on the Apple site. cheap knockoffs are available on eBay.

  • Converting from VHS to Digital Media - best digital encoding format to use

    Looking for a little insight into the VHS to digital media world.
    I have several VHS tapes (~30) which I would like to convert to digital media for further editing. From what I can find online most “Home Movie” conversion companies encode to mpeg2 on a DVD.
    I have done some of my own VHS to DV format conversions but has many of you know this is very time consuming and I would like to locate a company that can convert my VHS to DV and return back to me on a hard drive. In addition I have taken these conversion edited them in FCE and made DVDs in iDVD. Now I am looking to outsource the conversion process.
    I am looking to have delivered the raw DV converted file from the VHS conversion. Does anyone know of a reputable / reliable Conversion Company that can supply this service?
    If you think I am going down the wrong road in asking for the raw DV files please let me know and explain what you feel the best alternative is so I can edit in FCE and why this or that method is better, just as good, or is done as raw DV files from VHS tapes are just not required for some reason.
    If this is the case what is the best digital file to be working / editing with in FCE? The file format I should be asking for from a video conversion company.
    Thank you,
    Keith

    Some thoughts, all of which you may have already considered:
    Each hour of video will produce around 13GB of QuickTime files, so thirty two-hour VHS tapes would consume almost 400GB.
    Thirty DVDs will be a lot less expensive than a 500GB hard drive.
    Given the native resolutions of the different formats, my guess is that, if you had your VHS tapes converted to DVD, then converted those files to QuickTime for use in FCE, you'd have a hard time distinguishing that footage from what you'd get by capturing directly to QuickTime from those same VHS tapes. It might be interesting to do a comparison.

Maybe you are looking for