Digital Sending Software and BISCOM
Is anyone having issues using HP DSS 5.x with BISCOM Faxcom Suite for Windows 10.1.0.34? I setup HP DSS to use Lan Fax and BISCOM Faxcom, but when you submit a fax the header file that is created isn't accepted by BISCOM. It creates a .BAD file with contents similar to the below. Thanks for any tips/info!
******************** ENVELOPE ERROR ********************
Incorrect Header. Use 'START_BIS2.xx' with Ver2 Env. Use ASCII Codes '0x03 0x0A' with Ver1 Env.
START_BIS2.00
FROM_STAMP = Altomare
SENDER_USER_ID = WinCE
SUBJECT = Fax from HP MFP Digital Sending Software
RESOLUTION = HIGH
COVERPAGE = (NONE)
SEND_AT = IMMEDIATE
STATUS_ID = 00002
ID_TAG = 00002 1
RETURN_GOOD = YES
ATTACHMENT_IDS = ATT3063fe84-1fd4-49e7-8169-edf803cb1142.tif
START_RECIPIENT
REC_FAX# = 9015555555
END_RECIPIENT
Having a Software Update Server is very nice for this as well. I guess depends how many macs you have if it's worth it.
Similar Messages
-
I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking me to usa a disk instead. Where or how can I download the software available for that, please reply... thaks. (",)
Bluetooth file transfer has never been supported with iOS devices.
-
My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks
what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B -
Solved!
Go to Solution.NOTE: A separate installation of the Adobe Digital Editions software is not necessary if the latest version of the Sony® Reader for PC/Mac software is installed. Once installed, you will need to authorize your device with a Adobe Digital ID.
On the Adobe Digital Editions software Web site, click the Install button.
Follow the on-screen instructions to complete the installation.
NOTE: If you have issues installing the software, contact Adobe customer support at http://www.adobe.com/support/contact. -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
Digital Connections, SPDIF and Dolby Digital Info
I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
Dolby Surround info: http://www.dolby.com
I hope that clarifies the issue .
Message Edited by KokChoy-CL on 07-04-2008 :0 AMDigital Connections, SPDIF and Dolby Digital (german revision)
Options
03-08-2007 01:52 AM
Digital Connections, SPDIF and Dolby Digital Info
Übersetzung + Erweiterungen + Revision 03-08-07
Der Digitale Anschluß
Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
Digitale Anschlüsse – S-PDIF & Toslink
Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
!! Update !!
Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
!! Der einfache Weg !!
Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
- Glasfaser als Trägermaterial
( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
aufwendige Wege
Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
(Massetrennung )
+ die elektrische Verbindung der Schirmung wird umgangen
- aber Leistungs- & und Klangverlust(geringere Dynamik)
- Verwendung von ( hochwertigen ) symmetrischen Verbindungen
( „PLUS“ „MINUS“ „Masse“)
+ Trennung der Schirmung an einer „Seite“ des Kabels möglich
[bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
anschließend dieses Kabel wertlos ist ]
- sehr große Anschlüsse
- Profibereich
- Einsatz einer zentralen Spannungsversorgung für alle miteinander
verbundenen Geräte
Nachtrag
Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
- End - !! Update !!
Einige Vorbetrachtungen
Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
Drei Varianten der Decodierung sind möglich.
(1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
Bitte merken:
Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
(2) - AC3 / DTS mit der Soundkarte decodieren
Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
- die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
- wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
*** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
[ mehr unten ]
(3) - AC3 / DTS mit einer Software decodieren
Wenn deine Soundkarte kein DolbyDigital unterstützt
( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
(Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
( "SPDIF Pass-through" ) ausgeschaltet ist.
Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
Wiedergabeformate möglich.
In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
PC Spiele
PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
*** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
Kanalzuweisung 5.1
Front R / Front L + Rear R + Rear L + Subwoofer / Center
Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
!!! Notiz !!!
X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
Flexi-Jack - DigitalDIN
Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
- Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
- Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
( Stecker - Stecker )
- Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
( Stecker - Stecker )
Das digitale E/A-Modul ( Digital I/O – Modul )
Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
Achtung !!
( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
Front Panel-Sockel (für Geräte der SB073X-Serie)
2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
Anschlusskompatibilität
Ausschließlich Intel HD Front Panel Audio-Standard
Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
Einschränkungen
Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
Sound Blaster X-Fi E/A-Konsole
Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
-eof- -
I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera. how do I get my PC to reconize that it is an iPad
Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it.
This is what is happening to me. the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC. PC will not go anyfurther than a warning screen and I have to then shut it down unplug the iPad and start again. HELP please -
Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.
Reason that I ask is that I'm worried that I will not be able to read or work word or excel docs that people send me.No. Office 2011 for Mac is coded to run with OS X. In order to work on the iPad the app must be coded for iOS instead.
If you look in the iTunes App Store, you will find that there are many apps that allow you to work with Office files on an iPad.
Allan -
In a PC to PC GPIB configuration, one PC is used as a non-controller and it reads either LACS or TACS status bits continuously. It apears that the controller PC does not send UNTALK and UNLISTEN at the end of each message. The non-controller reads and writes therefor times-out.
What is the correct message synchronisation for a non-controller?
I use Labview 6, PCIIA, WIN98SE.
Thanks.Are you using LabVIEW as the controller, non-controller, or both?
NI-488.2 does have a configuration option to enable unaddressing. I am not sure of where it is in LabVIEW, but if you search for unaddressing, you should find some information on it. With unaddressing, NI-488. will unaddress the device after communicating with it.
If you are not using LabVIEW as the non-controller, National Instruments does have a software package called NI-Device that may help. This is an API designed for non-controllers. It does not currently have a LabVIEW interface. It works under C++ with a PCI-GPIB board.
A third option is to rewrite your device application. Your device should really not care about TACS or LACS as you read them from the status register Your device
should only look for LACS, DCAS, and perhaps DTAS (if you desire triggering). When it is LACS, it should read data. After a read has completed, it should interpret the data and get ready for a response. It is only at that moment that the device should look for TACS (and DCAS). It is hard to put a flowchart here, but if you design the flow of a standard instrument, you will see some patterns about when to look for certain status bits. -
HP MediaSmart DVD software and major Blu-ray issues
In September 2010, I bought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. From September 2010 to October 2014, I successfully played regular DVDs and CDs. But in October 2014, for the first time, I needed to view a Blu-ray DVD. Specifically, I needed to view the "Divergent" Blu-ray.
When I tried to play the "Divergent" Blu-ray (which was made in 2014), the HP MediaSmart DVD software (version 3.1.1.3317) and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
Next, I downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html. This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work.
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not even detect the Blu-ray.
Recently, I decided to revisit this issue. I installed the most advanced version of HP MediaSmart DVD. I installed HP TouchSmart DVD, version 4.1.2.5122.
TouchSmart flawlessly played disk 1 of the 2-disk "Star Trek" Blu-ray set (made in 2009). However, TouchSmart was not able to play the "Divergent" Blu-ray at all. After failing to play the "Divergent" Blu-ray, TouchSmart attempted to play disk 2 of the "Star Trek" Blu-ray set. TouchSmart played disk 2 with poor video.
Next, for some strange reason, TouchSmart became totally inaccessible. I could not start TouchSmart. I rebooted the computer. TouchSmart was then able to play the "Divergent" regular DVD, but was unable to play the "Star Trek" Blu-rays at all.
I did a system restore to the point just after the installation of TouchSmart. TouchSmart played regular DVDs well, but still could not play the "Star Trek" Blu-rays at all.
Next, I got rid of TouchSmart and installed HP MediaSmart DVD, version 4.1.4229 (sp49489.exe). MediaSmart 4.1.4229 flawlessly played the "Speed" Blu-ray (made in 2006). However, MediaSmart 4.1.4229 failed to play either of the "Star Trek" Blu-rays. And after failing to play the "Star Trek" Blu-rays, MediaSmart 4.1.4229 played "Speed" with poor video.
So, it appears that any specific version of HP MediaSmart DVD software will play old Blu-rays successfully, and will then subsequently fail to play more advanced, more recent Blu-rays. After that version fails to play the more advanced Blu-rays, that version will play the old Blu-rays, not as flawlessly as before, but rather with poor video quality or not at all.
I have read many threads on the HP forums and on other forums about people having trouble playing Blu-ray DVDs on a wide variety of HP computers. I went back to the specifications of my HP computer, and I found the following disclaimer about that computer's Blu-ray capabilities:
As Blu-Ray is a new format containing new technologies, certain disc, digital connection, compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played on this Desktop PC. Some HD DVD and Blu-ray advanced features may not be supported. CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is recommended that you close all other applications before and during HD DVD and Blu-ray playback. HD DVD and Blu-ray movies will only play through the HD DVD and Blu-ray player software. Advanced Access Content System (AACS) keys are integrated into your PC for copy protection purposes. Occasional renewal of the AACS key is required, and easily done by connecting to the internet.
I believe that I have gone way above and beyond ordinary diligence, to try to get my computer to play Blu-ray DVDs. The disclaimer states that certain issues may arise and that flawless Blu-ray playback is not guaranteed for all systems. But certainly my frustrating experiences, and the frustrating experiences of others, go way beyond the leeway given by HP's disclaimer, do they not? Has anyone thought about the possibility of a class-action lawsuit against HP?In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider: Microsoft
Driver Date: 6/21/2006
Driver Version: 6.1.7601.17514
Digital Signer: Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files: C:\Windows\system32\DRIVERS\cdrom.sys
Provider: Microsoft Corporation
File version: 6.1.7600.16385 (win7_rtm.090713-1255)
Copyright: Microsoft Corporation. All Rights Reserved.
Digital Signer: Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware? -
Can no longer see my purchased books in Adobe Digital Edition software
Because my purchased books are no longer listed on my Adobe Digital Edition software, they can no longer be downloaded into my E-Reader (due to Rights protection). I do not understand why they disappeared from the Purchased list. I would like Adobe to Re-install into my purchased list all my purchased books. Would like some help with that.
Very nice device the PRS-350, my wife and I both have them.
Not exactly sure how much you have updated, so some of these comments may not be to the point ....
Copying to the Sony should have worked as long as it is still registered with the ID used when you bought the books.
Maybe the Sony lost its registration when you did Sony updates, and you need to reregister it?
Nothing will work with a different ID; you can change the email address assocated with the old ID,
but can't read books with a device registered with a different ID or transer them to a new ID.
Probably when you updated your software ADE lost its repository.
Adobe does not remember your books in any 'cloud' associated with your ID,
the ID is just used to unlock the files you still have that are associated with the ID.
Try opening the books on the USB on ADE (ctrl-O, menu/File/Add to Library).
They should then appear again in the ADE library and you should be able to copy to the Sony (assuming registrations all correct).
Or, if you want the books always available on the computer even without the USB,
copy from USB to computer, then use ADE to open the copies on the computer.
If ADE won't read the books either it is probably not correctly registered (with the original ID).
One possibility is that ADE got confused about registration when you reinstalled (it often does).
See ***1 note at end.
Also, there is a bug in ADE2.0/2.0.1 that means they Sony devices won't work with library books on that ADE release.
If you want to use library books, use the older more reliable version of ADE.
See ***2.
Good luck.
****1
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
****2
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172 -
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer. -
Dear Apple,
I am unable to download itones app for my windows pc that site says like "Now that you’ve downloaded iTunes, you’re just a few steps away from starting a digital entertainment collection and enjoying it on your Mac, PC, iPad, iPhone or iPod." but i couldn,t find in system.
please send the itones downloads link.
Thanks
sureshHi Suresh,
Thank you for your reply.
Devices should appear in the top right of iTunes, as seen in this image:
From:
iTunes 11 for Windows: Connect a device
http://support.apple.com/kb/PH12449
If you do not see your iOS device in this menu when you connect it to your computer, it may not be recognized by iTunes. In this case, I recommend the troubleshooting steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best,
Jeremy -
Photo Software and Apps
After you have uploaded your digital photos to your computer, you are almost ready to start editing. With many options for photo editing software, the possibilities are seemingly endless. There are many different tasks and operations you can perform, to varying levels and intensities, on your photos. The software can be used for professional work, creative expression, or simply practical purposes. There is software for the average consumer all the way up to industry professionals. With the introduction of smart phones with cameras and tablets with cameras, there are now apps to do similar things on those devices.
Often times, photo editing software is going to be used for that purpose exactly; editing. In the majority of the different programs available, you will be able to do much the same actions. You may have the ability to correct your image exposure by adding light to the photo or taking away light, and making it darker. There are many options for adjusting your color in the photo by tinting the image or changing the temperature to offer a cooler blue or maybe a warmer orange color. Some of the other functions you may find to adjust are things like contrast and saturation as well. These functions can be found in many mobile apps as well. However, not all software or apps are for editing photos. Some can be for organizational (storage and ease of access) or presentational purposes (slideshow creation).
The aforementioned are merely the tip of the iceberg to photo editing. Using apps that go deeper into the creative process and software geared toward the intermediate and above, you can create and add things to the photo rather than just alter what is already present in the image. The apps you are using through mobile devices won’t always provide you with a high-resolution final product. This is usually due to the limitations of some of the hardware from which they are being accessed. You can also purchase software to show you the basics of using your camera.
Some commonly used software and apps:
Photoshop, the most commonly used software. This software can pretty much do anything when it comes to editing digital images. Adobe also has a simpler version called Photoshop Elements that would meet the needs of most photographers.
Lightroom, this is organizational software. Simply put it is the best at what it does, and this is a must own software for any photographer. It helps organize your workflow as well as providing simple editing options.
Aperture, Apple’s photo editing software.
Photoshop Express, the Photoshop app for your smartphone or tablet.
There are many other photo editing software and apps on the market. If downloading an app, see if there is a free version first to see if you like the app. Software companies also usually provide a free trial edition of their software.Anywhere on a home page swipe down (not from the very top or you'll get the Notification Center) to launch Spotlight.
-
Hi there,
This morning when I went to the Firefox main page, I noticed at the bottom of the page a box which said it had 6 questions to answer and it was by some company called Digital Future Community. I have never had this on the main page before and it keeps on coming back. It may have come in on some website and attached itself to the main page and I wish to remove it.
Can someone please advise me how I can get rid of this pesky box.
Many thanks.
PatchcaDear all,
Having just come across this thread by chance, we would like to clarify a fundamental misunderstanding with regard to the Digital Future Community and the associated browser add-on:
The Digital Future Community is a market research programme conducted by us, nurago, an online market research company located in Germany and part of the GfK group. We developed the Gacela software which you seem to have installed on your PC.
Obviously, you or somebody else who is using the same computer, has voluntarily downloaded and installed the Gacela add-on onto your PC to become a participant in our research. Either you or another person in your household is registered as a member with an online market research panel in the United States and accepted an invitation to take part in the Digital Future Community against payment or other compensation, e.g., panel-credits.
Gacela serves to research the usage of certain online offers. It records which websites you visit while you are using the internet and which advertisements are displayed. The Gacela add-on is automatically activated each time the browser is opened. As a part of the research programme, you may also occasionally be asked to complete short questionnaires. For this purpose, notifications are displayed in the browser window.
Gacela is not malware. It is whitelisted by several major anti-virus software vendors and never installs onto any computer without the user's knowledge and explicit consent. In exceptional cases we have found that some anti-virus packages will flag our software as a trojan. We can assure you that this is not the case, however, if this happens, please take comfort in the fact that your anti-virus software is clearly working exceptionally well.
As a member of international and domestic market research organizations, such as ESOMAR and BVM, nurago is committed to the industry's professional rules of conduct, strictest compliance with data-protection laws and a policy of maximum transparency towards research-participants. Your privacy is very important to us. In particular, nurago as a market research company has no intention to use collected personal information for any marketing purposes whatsoever or to reveal collected data to any third party, including clients, unless in an aggregated statistical form.
For further details, including instructions for uninstalling, please refer to our support-website: http://dfc.gacela.eu/index.html
and our privacy disclosure agreement: http://service-dfc.gacela.eu/gacela2/gacela2_dfc/file.php?file_id=html.nurago_policy_2010
If you have any questions, please feel free to contact us: gacela-support [at] nurago.com
However, we apologize for any confusion.
Kind regards,
Bernd Schaefer
Manager Panel Support
nurago GmbH
Maybe you are looking for
-
Help me!! I can't run photoshop cs6 in windows 8
Help me!! I can't run photoshop cs6 in windows 8
-
Hi Friends I'm developing Flex with java using Blaze-DS under the Spring MVC. I've problem in using Jboss, Based on BlazeDS Installation guide http://opensource.adobe.com/wiki/display/blazeds/Installation+Guide configure the jboss with Flex.There is
-
Photos Not displaying properly
Okay, so when I take a picture with my Iphone I do not do it in landscape mode, i then transfer them to my computer and move them to different folders and sync the ones i want to be on my Iphone. the problem is after I sync them back, the pictures i
-
hi all, My requirement is to display amt with currency .i.e <b>$ 35.00</b> in single column. Thanks Senthil
-
Hi, I want to design a report, which will display employees pic with other informative data about each employee. Basically the purpose of this report is to design employee cards. I am using reports 6i and the pics of employees are stored in file syst