Digital video editing

What software allows you to do digital video editing. For example, if I wanted take a TV show or a movie and add a pizza box on the table during the scene. What software would I use.

Depends on how advanced you want the software to be. What exactly are you looking to do?
With the effect that you mentioned, Adobe After Effects would be a good program, that is used more for effects rather than video editing.

Similar Messages

Which is the best MacBook for me to buy if I want to use it for digital video editing as well as Photoshop?

All the Apple MacBooks have been upgraded. I am looking for either a MacBook Pro or a MacBook that I can use to edit digital videos and do some Photoshop work. Which one would you advise me to go for? I am considering the 13”.

Welcome to the Apple Support Communities
I recommend the 15-inch MacBook Pro if you can afford it. That's because Photoshop runs better on a dedicated graphic card, which only the 15-inch MacBook Pro includes, but it should run without any problem on a 13-inch MacBook Pro too

FCE, Sony HD Camera, Family Video Editing, & Burning (HD?)DVD

Ok. Here goes ... I am a new iMac enthusiast who has "seen the light". That being said, I will be purchasing my first iMac in 30 days and I am hopefull that my expectation(s) do not fall flat because they are unrealistic. The only expectation in which there appears to be some doubt is this ... I am planning to convert all of my family videos (present formats of VHS, VHS-C, & AVCHD) to a HD format on a DVD, or at least to another electronic hardware such as a hard drive or a library of SD cards. Well, how many holes do I have in my plan? Before you answer, allow me to tell you my understanding of the barriers. First of all the actual conversion of VHS format to a digital format. I do have a Plextor Digital Video Converter with which I have, in the past, successfully converted the analog VHS format to a digital format and saved on a Windows PC, so I do have some experience with that effort. I do understand the labor intensive exercise this could prove to be. Second, I anticipate the VHS-C conversion to be about the same process. However, what about the video that I presently have on my Sony HDR-SR11? I have already done some importing and editing of said digital video via my daughter's MacPro & iMovie, but what about burning it to DVD? Of course, when I burned the video to DVD it converted to standard format. I want it to be in a HD format. From what I have seen in forums and various discussions on the net, this is almost impossible without some relatively complicated manipulation via Toast 10, BluRay drive, etc. type effort. What is the deal? Why the black hole of interface when it comes to burning digital video to a HD format, even when the original source is HD? It seems to me that there is a huge opportunity for Apple to capture a tremendous segment of business by providng an "Apple-like" seemless process of conveting (AVC)HD video and enabling the burning (archiving) of such video to a digital disk in either iMovie or FCE or whatever, be it a DVD or SD card.
Ok ... back to my question. Is the gap as large as I understand it to be? Is there no other way to accomplish this task? Is FCE a viable option and/or tool in this effort or not? Am I better off using Toast 10 or is that not even the answer? Help!

Hi and welcome to the forum!
I think your expectations are on the whole very realistic, and FCE would certainly help in what you seem to be wanting to do. For converting old VHS tapes, an analog to DV converter will do the trick. You simply plug in the converter to your camera, and it should convert the analog to a DV format that you can capture directly into FCE with the DV Converter preset to make things easier for you.
As for using AVCHD, FCE does not edit it natively but will convert it upon ingest to Apple Intermediate Codec for editing natively. Not much quality is lost in this conversion, and the Log and Transfer interface within FCE that you use to ingest AVCHD from your camcorder is top notch.
The thing you have to understand about HD-DVDs is that they are very costly to produce and view, with a rather small viewer base. It is possible as you said to burn HD DVDs using Toast or the DVD Studio Pro that comes with Final Cut Studio. Even then you would need a separate Blue-ray disc burner to hook up to your computer, the expensive HD discs themselves, and an HD DVD reader to hook up to your HD TV. I guess the reason why iDVD does not offer HD DVD burning is that there are a relatively small amount of people who require it or have the funds to make it work smoothly. Very few people have HD DVD readers in their homes anyway, so you can be assured that most DVDs you would burn would be played solely on your machine.
Do not give up hope! SD DVDs still preserve pretty good quality, are easy to use with the software installed on the Mac, and are assured to play on the majority of TVs owned by people today. If you are bent on getting the HD to work for your TV, Ian's helpful post on [viewing HD videos|http://discussions.apple.com/thread.jspa?messageID=10506824&#10506824] with an inexpensive media player might make more sense for you.
So all in all, FCE is a viable tool for most things you would like to do with video. However, if you are sure you want to burn to HD DVDs you will need other software and equipment than what comes with your Mac.

New video editing pc.. will this work ? i'm new here, please help me out

hi everybody my name is mark, . i really hope i write and express myself correctly
first of all i'd like to say i love this forum. there are some brilliant ppl here with great advice.
special props to Mr Harm Millaard.. wow u know sum serious s*** !
i'm a pro musician my thing has always been protools, recording production etc. its time for me to get into video using adobe premiere pro
mostly i'll be doing my own music vids for my solo projects and for my band as well as professionally done as possible. i'm a nebie at all things video but i'm totally obsessive when it come to creative projects. it helps with the learning curve (:
this is my courant rig setup
http://http://www.newegg.com/Product/Product.aspx?Item=N82E16813131405
http://CPU INTEL|CORE I5 750 2.66G R
http://MEM 4Gx2|GSKILL F3-10666CL9D-8GBRL
3 Wd hd's 160 500 and 640 gb's
2 monitors 22' hanns g and a 19 "something
i believe a 400 or 450 w powersupply
stock vidow card
2 cd/dvd
i think that covers the basics
AFTER OVER A WEEK OF RESEARCHING AND NO SLEEP THIS IS WHAT I CAME UP WITH FOR MY NEW RIG
http://ASUS P6X58D Premium LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
http://Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor BX80601950
http://G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9T-12GBRL
http://HITACHI Deskstar 7K3000 HDS723020BLA642 (0f12115) 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
http://Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
http://EVGA 012-P3-1470-AR GeForce GTX 470 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
http://Thermaltake Black Widow W0319RU 850W ATX 12V v2.3, EPS 12V v2.91 CrossFire Certified 80 PLUS BRONZE Certified Modular Active PFC
http://Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
total 1,399.92 i'm pretty much at my budget max
will this setup be able to handle both my protools and adobe premier cs5? am i missing something ?
what would be the best HD set up wise for max audio/video performance ? i was thinking a dual boot ?
with 2 new hd's i'll have 5 all told.
3 for video... 150 veloci raptor 2tb Hitachi and WD 640
..2 for protools... the wd 160 and the WD 500
i guess i'm looking for the best way to set up my rig for max audio/video performance and pass the information on to my cuz who's in the pc building biz his thing is gaming not so much video editing.
i really hope i wrote this out correctly so everybody can understand what i'm trying to say and will be able to give me the proper guidance i need
let the suggestions begin
thank u for your time
Message was edited by: iammajick

thanks for your support guys. it now looks like i'm changing up my rig again. looks like were going to be going with a RAID set up
3 x http://Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 http://Western Digital Caviar Black WD6401AALS 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive which i already have on the rig i'm using
my cousin gino orffitelli who's mainly a gamer builder for his company ePro had this to say in an email to me last nite.. he gave kool props to the adobe forums
'finally had a few min read through your email and skim the links you made in adobe'.....'as far as storage is concerend i believe the mobo's your looking at support RAID and from what i read thanks to your links, RAID 5 offers the best performance and saftey which means 4 HDD's.....' with the knowlege base your building and contacts u have you and i may just open a new direction for ePRO'.....
i try my hardest to understand RAID but since i'm a novice with computers its really hard for me to grasp it...http://forums.adobe.com/thread/525263
my brain is in overload insane trying to process all this (:
so guys... RAID 5 with the rest of the hardware i'll be using ?
like i said i'd like to have the max performance for my audio/vidio rig.
thanks again guys
mark

New to Mac and to video editing...need some guidance, please

I've decided to make the switch and ordered a new 3Ghz 24" iMac. I chose a 1TB HD and 4G of RAM.
I want to do some photo and video editing (nothing professional, simply vacation photos and video). I'll be purchasing an HD camcorder later this year to replace my current one (non-HD). I currently have about 5000 photos and about 50 hours of unedited DV on DV tapes to begin to work with.
Any suggestions on the following would be much appreciated:
1. Back-up: Should I use a 1GB Time Capsule or a 1 GB GTECH drive with Time Machine? I should mention that I plan on purchasing a MB or MBP later this year. Can I use a GTech HD as a NAS-like drive for both the iMac and the notebook?
2. Should I partition the internal HD?
3. Should I use a 'scratch disk' for video editing? If so, any suggestions for a particular size or model?
4. Any suggestions for ease of transfer of my data from my PC (photos, iTunes library, mail, IE favorites, etc.)?
5. Anything else you would suggest for a new Mac user?
Thanks very much for the help!!!

Hi there.
First, a couple of websites to help you on your way (and Welcome to the Mac!)
http://www.apple.com/support/mac101/
And also
http://www.apple.com/support/leopard/
Now, as for your questions, these are just IMHO:
Backup - get BOTH the capsule and a separate HD. If you can only get one, personally I would get the non-TB disk so that I can drag the video files that I want onto it. the Capsule might backup other stuff (and slowly compared to the straight drive; get a FW 800 drive if you can, if not then FW 400 at least). I also think you meant TB not GB! Just make sure the DISK is from a good vendor (Seagate, Hitachi or Western Digital).
Partition - Nope; wastes space; you need contiguous space from my experience. Only do that if you really need to run Windows via Boot Camp (not recommended to run Windows at all!)
Scratch disk is absolutely recommended. Get the largest size one you can afford and separate out this from your backup disk. (Worst case, use a bit of the scratch disk as your backup, but also keep the same work files on your main hard disk so you at least have a physical duplicate somewhere). Yup, hard disks are gonna add up!
The above websites have some tips on transferring content from PCs; generally you can just burn stuff onto DVD and import them onto the Mac. That's pretty straight forward.
Suggestions IMHO - forget the Mighty Mouse and get another quality two button mouse. Also consider a Kensington Trackball. Get AppleCare warranty for all your hardware (for peace of mind). Triple check that your camcorder will be supported by iMovie '08. It might not be by Final Cut but at least you can get the files from iMovie into Final Cut. But Final Cut does support quite a lot of them already.
Introduce 10 other Windows people to the Mac. (This is what we do).
Cheers!

Multiple Hard Drives for Video Editing with Premiere Elements 8?

I'm using Premiere Elements 8 for video editing. These are the specs I'm using:
The camcorder I used to shoot the footage is a Sony Handycam with model number HDR-SR12. It's a digital HD video camera recorder that shoots in NTSC 1920x1080i HD recording. The footage was shot with AVC HD 9M (HQ), which records in higher image quality mode. The video camera is connected to my computer through a USB cable.
The computer itself is a Windows 7 desktop computer. The CPU is an HP Pavilion Elite HPE-150f PC with Intel Core i7-860 processor. I imported the video into Premiere by selecting "File" --> "Get Media From" and then choosing the third option from the top.
My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
Even with the patch 8.0.1 that should be preventing crashing, the program keeps crashing upon startup with one specific video project. Using the exact same video files for that project, I recreated the video, with Elements, and never ran into the problem. Both times, I had the patch installed.
At the moment, I am using only the single internal hard drive for everything (software, OS, video editing, etc.). It is 1 TB in size. However, I am informed that one hard drive is not recommended for video editing, and that I need at least two hard drives, one for OS and one specifically for video editing. I was also informed of FireWire 800 and eSata; however, it does not appear that my computer supports eSata.
Can this problem be resolved if I have an external hard drive and connect it to my computer with FireWire 800 (which the computer supports)? If not, what can be done so this problem doesn't arise in the future?
Thanks for the help.

staring-into-space wrote: My import option is NTSC/AVCHD/Full HD 1080i 30 5.1 channel, which matches the specs of the camera I shot the footage with.
When you import the footage is there a red line across the whole of the timeline?
staring-into-space wrote:
I recreated the video, with Elements, and never ran into the problem.
As you have the recreated project working fine I'd be inclined to put this down as a one-off glitch. If it happens again on a different project then it may be more worrying. You may want to consider using save-as to create multiple versions of your project (note this does NOT duplicate the source clips - so you won't be eating up much extra disk space). You could for example use save-as to create a daily version - ProjectName-Mon, ProjectName-Tue etc....
Cheers,
Neale
Insanity is hereditary, you get it from your children

For those of you who cannot afford a proper video editing system...

...don't buy any prosumer video editing program (including Premiere Pro CS5.5). Here's why:
Last night, I ran the PPBM5 test on an Intel i3-2100 system with 4GB of DDR3-1333 RAM, a 500GB OS drive and a 1TB project drive (both drives are 7200 RPM) and integrated (onboard) Intel HD Graphics 2000. (This is the kind of system that one might buy for the purpose of Interner surfing and some limited gaming.) I have just submitted the results to the PPBM5 site.
The result?
With a total time of 976 seconds, that system is around 20 times slower than a fast i7 system (although it was marginally faster than the other systems with dual-core CPUs on the PPBM5 results list). That i3-2100 system also proved that no system with a dual-core CPU performed as fast as a system with even a mediocre-performing quad-core CPU.
In other words, at the lower end, you get what you pay for. This post and thread is to inform how senseless it is to cheap out on the components when building a video editing build.

If you absolutely can't afford the "fully ready" cost of...
16GB DDR3-1333 RAM: $120
4 x 1TB 7200 RPM SATA hard drives: $240
320GB or 500GB 7200 RPM SATA hard drive (for OS): $45
You could START with...
8GB DDR3-1333 RAM (2x4Gig)
2 x 1TB 7200 RPM SATA hard drives
320GB or 500GB 7200 RPM SATA hard drive (for OS)
And then add Ram and/or hard drives as need and $$ is available
The computer I built a bit over a year ago is described at http://forums.adobe.com/thread/652694?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
For home hobbyist editing of AVCHD my computer does very well... for me

Which G5 for Video Editing?

Hello, I've decided not to wait for an Intel MacPro, but would like to buy a G5 in the next 5 mos (by July) for standard-definition video editing using FCP 5 Studio. I have a few questions:
1) Currently, I have a Quicksilver G4 with dual 1 Gz, 1 Gb ram and 160 Gb ATA drive. Would FCP 5 Studio work effectively on this machine (for editing, color-correction, motion graphics, rendering to DVD etc)? If not, is it worth investing more money into this machine, or should I switch to a G5?
2) Which G5 would work effectively for my purposes? Kindly advise on clock-speed, RAM, Video card, hard disk etc. I take it I will not need RAID for SD, but only high-definition? I would need to use this machine for at least 3 years. Do you see Apple discontinuing hardware or FCP support for this platform during this time?
3) How would the 23" screen be for video-editing? Are there any rumors about a 25" screen replacing it?
4) Lastly, are there any Apple conventions in the next 6 mos (where new products could be announced), which I should wait for, before purchasing?
Thanks for your advice!
G4 Quicksilver Mac OS X (10.3.5) Dual 1 Gz, 1 Gb Ram, 2 x 80 Gb ATA

Hello, I've decided not to wait for an Intel MacPro, but would like to buy a G5 in the next 5 mos (by July) for standard-definition video editing using FCP 5 Studio. I have a few questions:
Get a Quad and get one fast, with a PPC machine you'll have lots of media copying freedom as you have control over your hardware. With the new EFI Mactels, trusted computing and HDCP coming you will not.
Actually I wouldn't waste money on a PowerMactel machine until the whole "Blueray/HD-DVD" thing gets straightened out too, that's going to have a lot of baggage associated with it. When they do at least you'll have a Quad to be able to do things you won't be allowed on the PowerMactel w/BlueRay.
Standard definition is going "bye-bye" in the US mandatory by 2009, mostly by 2007. You'll need to go HD as all the new TV sets being sold are HD/digital ready and all the content will switch as well. (HD Is really nice too, but eats hard drive space fast)
1) Currently, I have a Quicksilver G4 with dual 1 Gz, 1 Gb ram and 160 Gb ATA drive. Would FCP 5 Studio work effectively on this machine (for editing, color-correction, motion graphics, rendering to DVD etc)? If not, is it worth investing more money into this machine, or should I switch to a G5?
Yes sure, but if time = money, you'll need CPU muscle to render faster and large RAM to burn faster.
I say get a PPC Quad, a large stock drive with 16MB of cache and a Western Digital 150GB 10,000 RPM RaptorX for a boot/app and "bare bones" home drive, keeping your video on the large stock drive. Get yourself 4Gb of RAM or slightly more, install it yourself and save money by visiting Crucial.com. (no comp)
2) Which G5 would work effectively for my purposes? Kindly advise on clock-speed, RAM, Video card, hard disk etc. I take it I will not need RAID for SD, but only high-definition? I would need to use this machine for at least 3 years. Do you see Apple discontinuing hardware or FCP support for this platform during this time?
Apple will support PPC based hardware for a long time, so will a lot of third party software makers because it's the majority platform. Not much software is available for the Mactel based machines, so PPC and the Quad is the best longterm professional choice at this time. I would also not get the stock card but the next one up.
RAID you can play with later, rolling your own mini-raid set or if you have volume and require speed then a X-RAID.
3) How would the 23" screen be for video-editing? Are there any rumors about a 25" screen replacing it?
I had a 23", it's small, but it will do the job. A couple of inches increase won't make much of a difference IMO. If you got the bucks get a 30", it's awesome and better than two monitors as you don't need to turn your head back and forth. Just sit back and take it all in.
Of course for standard video your going to need a standard monitor anyway for previewing.
4) Lastly, are there any Apple conventions in the next 6 mos (where new products could be announced), which I should wait for, before purchasing?
We just had one, Macworld, where the Mactels were announced, supposely Intel will release a 64 bit dual core around September, Adobe Photoshop supposely won't be ready with a Mactel version for another 14 months it's been estimated.
Apple is working on universal versions of their apps, some are ready already.
http://appleintelfaq.com/
A site that be of interest to you is HDforIndies.com
I always advise people to clone their boot drives
http://homepage.mac.com/hogfish/Personal11.html

Suitable laptop for video editing

Hello,
for months now I am looking for a suitable laptop for video editing of my footage captured by Canon 60D (and also GoPro). Since it is in a HD quality and h.264 format it puts a great strain on the CPU. I already had to return an ASUS U30J and Dell XPS14 both with i7 processors because of their terribly slow performance :(. So now, I really want to be 100% sure that the laptop will be able to smoothly handle my footage. I am using Adobe Premiere Pro CS5 for video editing and I do need a laptop (preferably 15'') as I travel all the time.
Here are the specifications of the Force 16F2 laptop built on MSI 16F2 (from the xoticpc.com), which I have chosen so far:
FORCE 16F2 / MSI 16F2
- 15.6” FHD 16:9 LED Backlit Wide screen (1920x1080) Super Clear Glare Type Screen
- 2nd Generation Intel® Core™ i7-2720QM, 2.2-3.3GHz, (32nm, 6MB L3 cache)
- IC Diamond Thermal Compound - CPU + GPU (Cools better than all Compounds)
- nVidia GeForce GTX 560M 1,536MB PCI-Express GDDR5 DX11
- 12,288MB (12GB) DDR3 1333MHz Dual Channel Memory (2x4GB 2x2GB)-
- Standard Finish
- - 500GB (w/ 4GB SSD Memory) Seagate XT 7200RPM NCQ Hybrid 32MB Cache (Serial-ATA II 3GB/s)- or 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)--
- 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)-
- Raid 0 Stripe Enabled (Requires 2 or 3 Hard Drives. Combines Hard Drives for performance)
- 500GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s) in ODD Bay
- 3 Year Complete Care Warranty - 3 Year Parts with Ground Shipping, 24/7 Telephone Tech Support & Lifetime Labor Warranty
I would like to ask you what do you think about this configuration regarding my requirements? Will this system be powerful enough to handle the h.264 footage? I would like to use both the SLR camera and the laptop as long as possible and don't have to change the laptop in one year time or so. That's why I would like the system to be powerful enough to withstand even future demands of the software, etc.
I was also not sure about the 500GB (w/ 4GB SSD Memory) Seagate XT 7200RPM NCQ Hybrid 32MB Cache (Serial-ATA II 3GB/s. Do you think it is a smart choice? Is the 4GB SSD memory of any use? Or should I rather go with the 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)?
I don't have any previous experience with the raid system, do you think that the Raid 0 Stripe Enabled (Requires 2 or 3 Hard Drives. Combines Hard Drives for performance) is the right choice for smooth video editing? I know that I have to use at least 2 hard drives so that's why I'd rather order 3 HDD to get the best performance..
This configuration is worth 1800USD, I would obviously like to save some money as I will need to pay also the shipping costs, tax and duty (I currently live in New Delhi)... So if you think that something from the system might be downgraded and I would still get good video editing results, please let me know.
Do you think that the 3 Year Complete Care Warranty - 3 Year Parts with Ground Shipping, 24/7 Telephone Tech Support & Lifetime Labor Warranty is of any use when I am not from the US? Should I rather go with the 1 Year warranty?
I would very much appreciate any feedback from you!
Misha

Frederick, I will firstly answer your questions, I am in no way a pro video editor, my projects are up to 10MB of size although I wasn't yet able to edit the h.264 footage properly ... I mostly do events and quite simple projects, effects, two to three timelines... I use only h.264, my older projects are in DV quality thought. I usually have to rush to finish a project since I have limited time during the travels.. I usually work at one, maximum two projects at the same time
Now, I have been trying to figure out what would be the best configuration for me and ended up with these two options, which are touching (maybe even overflowing) my budget... Both are worth around USD2100 (without shipping, etc.). Either I will be going for one SSD disk for the OS or for maximum CPU and RAM. Which configuration would you recommend me? Do you think that the second configuration is an overkill when taken into account the size and scope of my projects?
With SSD disk:
FORCE 16F2 / MSI 16F2
- 15.6” FHD 16:9 LED Backlit Wide screen (1920x1080) Super Clear Matte Type Screen
- 2nd Generation Intel® Core™ i7-2720QM, 2.2-3.3GHz, (32nm, 6MB L3 cache)
- IC Diamond Thermal Compound - CPU + GPU (Cools better than all Compounds)
- nVidia GeForce GTX 560M 1,536MB PCI-Express GDDR5 DX11
- 10,240MB (10GB) DDR3 1333MHz Dual Channel Memory (1x4GB 3x2GB)
- Standard Finish
- - 120GB OCZ Vertex 3 MAX IOPS Sandforce Solid State Drive (Up to Sequential Read 550MB/s - Write 500MB/s SSD Serial-ATA III)
- - 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)-
- HDD Raid Settings - OFF
- 320GB 7200RPM WD or Seagate (Serial-ATA II 3GB/s) in ODD Bay
- 3 Year Complete Care Warranty - 3 Year Parts with Ground Shipping, 24/7 Telephone Tech Support & Lifetime Labor Warranty
With better CPU and RAM:
FORCE 16F2 / MSI 16F2
- 15.6” FHD 16:9 LED Backlit Wide screen (1920x1080) Super Clear Matte Type Screen
- 2nd Generation Intel® Core™ i7-2820QM, 2.3-3.4GHz, (32nm, 8MB L3 cache)
- IC Diamond Thermal Compound - CPU + GPU (Cools better than all Compounds)
- nVidia GeForce GTX 560M 1,536MB PCI-Express GDDR5 DX11
- 16,384MB (16GB) DDR3 1333MHz Dual Channel Memory (4x4GB)-SPECIAL
- Standard Finish
- - 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)-
- - 750GB 7200RPM 16MB Cache Buffer (Serial-ATA II 3GB/s)-
- HDD Raid Settings - OFF
- 320GB 7200RPM WD or Seagate (Serial-ATA II 3GB/s) in ODD Bay
- Stock OEM Thermal Compound ( IC Diamond Thermal Compound - CPU + GPU Provided FREE with Processor Upgrade!)
- Internal 7-in-1 Card Reader (MS/MS Pro/MS Duo/MS Pro Duo/SD/Mini-SD/MMC/RS)
- Internal Bluetooth + EDR
- Built-in 802.11 Wireless B/G/N - Stock Wireless Card
- Integrated Digital Video Camera
- Sound Blaster Compatible 3D Audio - Included
- Smart Li-ion Battery (9-Cell)
- 3 Year Complete Care Warranty - 3 Year Parts with Ground Shipping, 24/7 Telephone Tech Support & Lifetime Labor Warranty
Frederick, regarding the RAM I checked the 8GB option and it comes in 2GBx4 so I won't be able to save those slots. Plus I have been searching for prices of the RAM, HDD and SSD in the US and they don't seem to be that great for me to even consider them... I would simply have to pay more and would end up with unused parts from the basic configuration. I think that the Xoticpc have quite reasonable prices of the upgrades they offer... Plus I can count on higher prices of the components here in India so all in all I think that it would cost me too much energy and save me minimum bucks... That's why I thought I might go for the 16GB RAM straight away if it isn't an overkill for me. As I said before, I would love to save money (after all I am a woman who controls the common budget) so please let me know, if I am just wasting money for high end technology which I won't be able to use . I rather think that in the future once I will finally be able to make some money when I will have a machine to work on, I might upgrade to better hard drives (SSD possibly). But right now I need a laptop on which I would be able to smoothly edit the HD h.264 footage.
Thank you very much for your help!

Computer for Video Editing for the Present and Beyond

In an earlier post I announced that I have been a Premiere Elements user since Day One, and I also mentioned I was looking to have a new computer built from scratch rather than purchase from Dell or HP. I am close to finalizing that build, and am looking forward to upgrading to Elements 8.0. I am also looking forward to becoming a subscriber to Muvipix.com. Becoming a part of the Adobe Premiere Elements Forum coupled with being an eventual subscriber to Muvipix.com has elevated my enthusiasm for video editing. Special Thanks go to Bill Hunt and Steve Grisetti for anchoring this Adobe Pre E Forum. Your advice has motivated me to take my video editing with Premiere Elements to another level.
Speaking of advice, what does everyone think of the following specifications for my new computer? Is this a solid computer for video editing? In some cases some components lack specificity (model numbers, brand names, et cetera). Suggestions and comments will be greatly appreciated as I take this final step. Thanks to all!
ATX Antec     193 Computer Case
X58 ASUS      Motherboard
Core      i7- 930 Processor (1366)
700W     OCZ Power Supply
Triple     Channel DDR3 (6 GB RAM - 3x2GB)
64-bit      Windows 7 Home Premium
(2) Western     Digital 1T HDDs
22xDVD+/-RW      Burner
ATI Radeon 4670 Video Card DDR3 (dual     monitor support)

jcrystal76 wrote:
I read your computer spec sheet. Thanks for sharing. You said the ideal thing to do is use the computer just for video editing. Best way to go. However, you still need an OS, which requires updates. And you need to update drivers, and then there are product updates and add-ons. You need to connect with the Internet to do all of this
I do not have $$ or space to have 2 computers, so my single computer is for day to day work, and video editing as a hobbyist... which of course is not "ideal" for video editing... but I don't make $$ at this, so I use what I have
I am still learning about Win7 64bit, so do not have all the startup process optimized... that is my next project, to figure out what does not need to be running, and remove that un-needed stuff from the startup
You also asked about backup... the IMAGE program I use is mentioned in http://www.pacifier.com/~jtsmith/ADOBE.HTM#SmartOwn
I make a boot drive image to external USB hard drive before installing any new software

Video Editing

Hi all,
I am a newbie to video editing. I have some 8mm tapes and I would like to transfer the raw video to my pc for editing. My camcorder supports composite and s-video interfaces, therefore I need to invest in some kind of video transfer card and software such as adobe encore.
Another option I am considering is to rip the videos to DVD directly and then use encore to edit them. However I don't know if this is possible.
Can anyone provide any help / advise with my mini project.

You do not edit video with Encore... you edit with Premiere Pro http://forums.adobe.com/community/premiere/premierepro_current?view=overview - current version is CS6
After editing and exporting your project to MPEG2-DVD you use Encore to author the DVD (Encore is bundled with PPro)
PPro uses Firewire to get your video from your (digital ???) 8mm tapes to computer as DV AVI
If your 8mm tapes are analog, you need a converter http://www.grassvalley.com/products/converters
When you are ready, go to the PPro forum I linked above for editing help
Be sure to read the system requirements before you buy Premiere Pro
Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
This message has a really good graphic about requirements
- http://forums.adobe.com/thread/810750
More about Requirements http://forums.adobe.com/thread/618058
Disk Configurations http://forums.adobe.com/thread/878419
You may also want to consider the all-in-one Premiere Elements http://forums.adobe.com/community/premiere_elements
For a "mini project" think about spending about $800 for Premiere Pro -vs- about $100 for Premiere elements

SONY Digital Video Camera DCR-DVD 201 and iMovie

I have a sony Digital Video Camera
Posted: Aug 6, 2006 6:59 PM in response to: max Farina
Reply Email
Can I use this Digital camera with my MacBook Pro
it is a SONY DCR-DVD 201
I do not see a firewire port on the camera ONLY a USB.
How can I get my video from my DVD to iMovie?
I want to put my home video from this camera to iMovie, Can it be done?
I am going nuts, I paid alot of money for this camera and now I can't use it in my new Mac?
I am very new to Mac and this hurts!
PLEASE someone help me, I only see a USB, DO they sell some thing to help get the Video into iMOVIE?
Thanks......

Search this forum for "compatible, DVD camcorder" and you will find many threads where people lament this truth:
iMovie is for miniDV formatted video connected via Firewire.
Mini DVD camcorders are designed for you to do very light editing on the camera before you finalize the DVD and don't support being imported into a computer. Anyway, many of the experts here know of converters and workarounds, if you want to spend some more money. You could start with these threads:
http://discussions.apple.com/thread.jspa?messageID=2404104&#2404104
http://discussions.apple.com/thread.jspa?messageID=2288697&#2288697
http://discussions.apple.com/thread.jspa?messageID=2243781&#2243781
Somewhere I have read a pretty detailed thread describing what converter you need and how to do it. So just keep searching...

Digital Video Converter

i'm a little confused about the difference between 'apple video adapter'
http://store.apple.com/Apple/WebObjects/ukstore.woa/6224040/wo/WB5d0bwOOsXt2cAsU qR1RKWHU7b/3.0.19.1.0.8.25.7.11.5.3
and a digital video converter -
http://www.canopus.com/products/ADVC110/index.php
i don’t want to mirror my ibooks monitor, but create an enlarged preview screen in fce
can my ibook do this?
i also have another problem. The Canopus converter uses firewire, and i only have one firewire port.
To add, i want to upgrade from a usb2 external hard drive to a firewire! just because i've recently read that it will work better as a scratch disk.
i seem to have too many devises and not enough ports.

About the first question:
- the Apple Video Adapter allows to use an external TV screen in place of your iBook screen. I have it but never use it since my video (iMac 20") is far better than a TV screen.
- a Digital Video Converter, instead, converts DV video into analog video and viceversa. In your case you could plug the DV end (firewire) to your iBook and the analog end to a TV set, and use it to "Print to Video" the Canvas of FCE during editing or previewing.
The main difference is that in the 1st case all you do on the iBook appears in the TV screen, in the 2nd case only the canvas output of FCE (or iMovie if needed).
To edit video use the 2nd solution only; this has the advantage to show in real time, during editing, exactly the final result of your movie (colors, interlacing problems, etc.).
You might have another option: most digital camcorders include a video converter and can be used in place of a stand alone Video Converter; if your digital camcorder allows it, use it in place of the Video Converter.
About your second question, if you switch to a firewire external drive you should be able to daisy chain your camcorder (or digital video converter) to the external drive, so the single firewire port on the iBook should be enough. Just be careful, I know some combinations of camcorders/hard drives don't work well together when daisy chained... Not my direct experience, but I read it in these discussions.
Piero

21.5" i7 vs 27" i5 -- which is more powerful? What about video editing?

I'm trying to decide between a 21.5" iMac with 1TB and i7 and the next step up -- the 27" with an i5.
My budget really was only for the 21.5 -- which comes out at 1699 -- the 27 would be 1999 --
My main current needs are: Animation (Flash, etc), CS Suite (40 layer Photoshop), other programming (HTML, CSS, Canvas, etc), and music (8 analog in, effects, Logic). I hope to start doing some HD video work (artistically) -- but due to focusing on music haven't really done much with it.
The person I spoke to at the store said if I were going to do "serious" video editing (Avid) then the 27" with the 1GB of memory on the video card would be better -- for video editing that is. He said that for everything else (CS Suite, etc -- and I believe he said Final Cut as well) the i7 with the 512MB video card would be better.
So -- here's the rub -- I'm on a limited budget and I think it might make more sense to put the extra 300 into RAM (they offered to bump the RAM to 12GB for $150 extra -- is that way too much?), or into an add'l monitor (I'm not taken with the glossy iMac screen as a main screen -- and that's also why the 27" screen wouldn't do much for me). I do want to do some video production, but I don't plan on getting Avid or anything like that anytime in the foreseeable future -- I'd probably be doing 10 min video pieces and for what I currently need the computer for the i7 with more RAM is much better. I just don't want to feel totally stupid down the road.
So:
21.5" iMac, 2.8 GHz i7, 1TB drive, 12GB RAM, Radeon 6750 with 512MB RAM
vs
27" iMac, 2.7 GHz i5, 1TB drive, 4 GB RAM, Radeon 6970 with 1GB RAM
Thanks

Similar question ... looking at nearly identical cost: 21" i7 2.8 vs. 27" i5 - both with the 512 6750 video card. (I'll buy my RAM upgrade on-line - will take either one to 16GB.)
Both have same video memory. I don't feel I need the bigger screen size if the processing power is a better value for video (can always add another, larger monitor).
This will be a video & audio editing computer. I have a TON of old Hi8 home movies to move to digital for archive and eventual editing, will capture via firewire Digital 8 Handicam.
My main new video projects will be <10 min - primarily for web delivery. Business sales/education and training. Pretty sure I'll want to upgrade with FCPX. I'm a believer in that you can always compress quality down, you can't enhance poor quality source up.
I have a background in video production (20 years ago), no expreience with NLE, but want to get back in.
I guess the i7 power will hold up longer and allow for growth of my abilities/uses of the software down the line ...
Maybe I've answered my own (& the OP's question) ...

New Video Editing Monitor

Hi guys.
I regularly work with video editing and I'm looking for a new monitor, my budget is not very high so I need to do a good choice.
For me the most important thing is image quality, I need a monitor I can trust the colors.
I was thinking of getting a DELL monitor because I always heard good things about them.
I would really apreciate if you could help me.
Thanks in advance.
César

César_Sousa wrote:
For me the most important thing is image quality, I need a monitor I can trust the colors.
Depends on what your output will be. If you are only going to show your video on the web, then a computer monitor that you can get a good calibration on should do fine. Calibration buys you a defined working space -- a solid neutral axis, no color casts, known edges of gamut, proper contrast, etc. All monitors will vary from this to some degree, but your calibrated monitor will show you the median, which is what you want for WYSIWYG work. So the people looking at your web videos will see something pretty close to what you intended.
OTOH, if you output will be DVD / BD, or broadcast TV, few computer monitors will show you the correct working space, which for HDTV is Rec.709. If you want WYSIWYG, you'll have to have Rec.709, there's no real way around it. This will take a production monitor (or an expensive computer monitor -- a couple of the Eizos can do this, and the HP Dreamcolor if it's still in production), which is considerably more expensive than a computer monitor. Low end production monitors start around 10x your budget, largely because they are made in much smaller numbers than computer monitors, and have much higher specifications; they just cost more to make.
If you want to output for a film print, you're talking real money. It's been awhile; I don't remember what the "standard" film working space is called, and of course it will vary somewhat depending on the film stock and the film recorder being targeted. But making a film print for distribution is sort of a silly thing to do these days.
A better path would be to a DCP (digital cinema package) which requires the CIE XYZ color space. There are monitors that support this too, and way beyond most budgets, save those of post-production houses.
If you are stuck with your budget and still want to author DVDs, about the best you can do is use a decent computer monitor, use the sRGB (not Adobe RGB or any wider gamut working space), calibrate it (without calibration you've got little hope of WYSISYG), and bump your contrast up to approximate Rec.709. Then work primarily off your scopes (waveform monitor, vectorscope, RGB parade) and not primarily off what you see. Burn a DVD / BD, and iterate making corrections and burning discs until you get what you want. It's an imprecise and much slower workflow, but it's doable in a budget pinch.
EDIT: You might also want to pick up a copy of Van Hurkman's Color Correction Handbook. Does a much better job explaining what you need than I can possibly do. And it's a wonderfully accessible tour of color correction. Answers questions you haven't thought to ask yet. At least, it does for me.

Digital video editing

Similar Messages

Maybe you are looking for