DigitalGraph Annotation at different axis-Y level although the value is same

Hi,
I have plot a graph with annotation and I found it labeling the axis-Y at the different level, with the same value.
Please look at the screenshot I attached. I have attached the Vi too, simply run it will get the result as preview in screenshot.
So,
Any idea to fix this ?
and I need to know,
How the annotation actually label the axis-Y level ? (sometimes label at '1', sometimes at '0', a reason behind it that cause this inconsistently ? a fix setting as written in cluster should have all the label at the same level, but why it behave up and down..)
Please help .. Thanks in advance..
Attachments:
forum.JPG ‏103 KB
waveformlabel.vi ‏28 KB

Hi,
Thanks for sending your VI with your question. I've tried running it and it appears to run fine with the digital input waveform you have specified. Do you have any input data that you know causes an error that you could send to me? I have attached a screenshot of what happens when I run the VI, so let me know if that looks more like what you are trying to achieve.
Also, the reason for the annotation switching between a 1 and a 0 along the various lines is because it is an indication of whether the digital signal on that line is high or low at that point, rather than a label on the y-axis itself. It shows that on, for example, line 4, the signal begins low, hence the 0 on the axis, before switching to high, hence the 1 on the axis. I'd be very grateful if you could let me know if this answers your question and don't hesitate to ask if you need anything else clarifying.
Regards
Jeremy T
Technical Marketing Engineer
National Instruments UK & Ireland
Attachments:
Digi waveform.JPG ‏146 KB

Similar Messages

Different heading label based on the value!

i have IR report ...
sl no
street
Ph
notes
this label never
to show here!
dynamic label
(ASIA)
(EUROPE)
1
2 nd st
96541
notes 1
ASIA
INDIA
2
2nd st
65841
notes 2
EUROPE
UK
3
2nd
5648
note 3
EUROPE
GERMANY
i have condition when the user logged from region wise,the region value should goes to label in Dynamic label as HEADING! how its possible?
Thanx,
Ram.

Ramani_vadakadu wrote:
Yes i did the validation based on the LOV to affect &ITEM_LABEL ! how can use this validation in pre-validation? please login and do the sample one based on the value(real data means my 1st query in thread)!
https://apex.oracle.com/pls/apex/f?p=29288:1:9453626954797:::::
Wks:ram_r&d
user/password: aramani/apex
I have no idea what you mean. There is no validation involved. Not only did I never mention validation, you are claiming that you "did the validation", yet there is no validation on your page at all. I suspect that you are using the term "validation" in a very different way from its APEX-specific meaning.
The component that is required in this case is a page computation with a Before Header computation point.

How to display the value of level axis in a scattered graph

hi All,
I have created a scatterd graph and i am able to show the X-axis and Y-axis values as tool tip. my requirement is to display the value of level axis also within the tool tip.
please help me to configure the value of level axis as tooltip.
thanks in advance

Hi,
Thanks for the reply. i was able to configure the tool tip for X and Y axis, but i was not able to shoe the third or level axis value in the tool tip.
please help me in configuring the third or level axis value in tool tip.
thanks in advance.

Displaying different levels of the same hierarchy in the different columns

I have a parent child hierarchy and wish to display different levels of the hierarchy in different columns of the resultset eg
level 1 level 2
Europe UK
Europe France
N America US
N America Canada
However writing MDX like the below
select
{} on 0,
([Geo].[level 1],[Geo].Level 2] on 1
from cube
results in the error "The [Geo] hierarchy is used more than once in the crossjoin
How can I get around this??

Hi,
You can make use of CrossJoin function in MDX, I give a sample MDX based on the AdventureWorks database:
select {[Measures].[Reseller Sales Amount]} on 0,
crossjoin({[Sales Territory].[Sales Territory Group].[Sales Territory Group].members},{[Sales Territory].[Sales Territory Country].[Sales Territory Country].members}) on 1
from [Adventure Works]
After execut the MDX you will get the result like this:
Reseller Sales Amount
Europe
France
$4,607,537.94
Europe
Germany
$1,983,988.04
Europe
United Kingdom
$4,279,008.83
NA
NA
(null)
North America
Canada
$14,377,925.60
North America
United States
$53,607,801.21
Pacific
Australia
$1,594,335.38
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to run MRP on different storage location level ?

Dear Experts,
Need your valuable guidance to solve the below requirement form the client-
1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
           For sake of example: in SL01 he wants the safety stock for particular material set to 5
                              In FS18 he wants the safety stock set to 2
                              In FS15 he wants the safety stock set to 1
Kindly tell me whether it is possible? & guide me how to do it.
2) Also tell me how to run MRP on a storage location level?
           This is because after maintaining different safety stocks for one material in different storage locations, is it possible to appear each storage location with their differing safety stock levels?
I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
Kindly guide me for the above issue
Thanks in advance for your support.
Regards,
Mehul

Hi Umashanker,
Thanks for your suggession . Accordingly I have resolved the issue.
Regards,
Mehul

Adjusting different audio clips levels?

Working in FCP and have a project with a lot of small individual clips of people speaking and each clip is at a different audio level. What's the best and easiest way to adjust the audio on each individual clip without over doing it labor wise?
Thanks
RD

Open each clip in Soundtrack Pro and normalize them to -6db. That will give you a reliable baseline for all the clips, and put the peak levels right where you want them.
Then, either in STP or back in FCP, adjust the level of each clip so the average dialog level is around -12db. Do this both by ear and watching the audio meter.
I suppose in FCP you could do the avg level adj. by keyframing the audio level, too. That would stay with the clip before you put it in a timeline. To use the faders you need to have the clip already placed in the sequence timeline.
If you find you need to raise the level of the normalized clip to get the avg. level to -12db, then you better put a limiter on the clip to keep the peak below -6db.

Imovie8 : how to variate the level of the different sounds ?

I look for extracting a sound and variate the level of the sounds of some parts of a clip or an event.
Unfortunately, Imovie Help gives replies useful for Imovie HD or Imovie 6 which have a "Visualiseur de la chronologie < extraire l'audio").
But imovie 7 and 8 has no more "visualiseur" and it is impossible to make variate the level of the differents sounds on an event (or a clip).
There is no explanation at all about this part of editing.
Where to find it ?
Sorry for my poor english... and thanks by advance to everyone !

Alan
Working with soundlevels is partly possible in iMovie 08, but not as detailed as in iMovie 06. You can use multiple tracks though and use autodugging and change audiolevels for a clip or background.
Here are some very usefull tips for working with audio in iMovie 08 (English though)
http://imovie08.blogspot.com/search/label/Audio
If you want more fine-tunig than presently possible you could export your project to garageband (or mediachooser, and open up in Garageband)
Ben
Message was edited by: Ben Bloks

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Controlling Level At The Production Order Level

Hi,
I want to set the ML controlling level to the production order level because I want to see the actual BOM used for each production order at the production order level. Since a different BOM may have been used for each production order (although the FG is the same) i must be able to see the actual BOM for each production order at the CKM3N screen.
However in the controlling level setting there is no way to set the controlling level up to the production order level. May i know why?

hi
check this link
http://help.sap.com/saphelp_470/helpdata/en/b2/6d118acb0a11d28a150000e83234f3/content.htm
check whether production order level is possible. i dont thinks so.but it highly affects your system performance.
krishna

Error in characteristic derivation at the level of the invoice item when re

We are implementing the SAP project for just one small private medical Center which includes mainly outpatient cases in different medical Clinics (different departments in the same medical center) .For example: Radiology center/department, cardiology center Obstetrics center and so on.
We have defined each center/department as a different profit center.
Some of departments are subdivided to several medical organizational units; each unit represents a different cost center at the same profit center/department.
A case-based order (internal CO orders relating to a patientu2019s case) is created in the background when the patient is admitted
The same patient can get services from few organizational units (in ISH)/cost centers at the same visit/case and that's why it is important to collect revenue and costs at the same case based order. The revenue is posted to the case base order by using billing in the ISH module and the costs by internal activity allocation.
We have assigned IS-H services to activity types in Controlling; the services transfer to the case based order. CO-relevant services are posted from IS-H to cost centers in CO and within internal activity allocation, allocate them to the case-based order.
For example:
X ray service assigned to Technician minutes activity type.
Each X Ray service takes 20 minutes of Technician (Qty Cnv Facto=20 MIN)
The service transfer is preformed automatically at final billing.
We have implemented Case Costing Level 2 in order to analyze case costs in CO-PA.
We want to have the ability to derive the profitability analysis characteristics at the level of a line item in the case, for example: we want to define a service or the preformed organizational unit as a characteristic in PA.
We are not sure what the best feasible solution for this requirement is.
We investigated few alternatives:
1.     We have defined the case based order as real order with a settlement rule to a profitability segment. Revenue and Costs are posted to the cased based order and then settled to the profitability analysis. We eliminated this alternative because we didn't find any way to distribute revenue and case costs to PA between the different "line item characteristics" (for example: different services in the case).
2.     After eliminating the first alternative we tried to change the solution.
We have dealt with revenue and costs separately.
1.     Revenue: In the "configure revenue accounting" We flagged the Post to Prof.Segment checkbox, the patient billing module attempts to determine a profitability segment in CO for each invoice item and to post the revenue to it. The system determines the profitability segment using the characteristics of the patient and case data we defined.
We are using ISH_CHARACTERISTIC_* functions for characteristic derivation but we couldn't derive user defined characteristics which are defined at the level of the invoice item. (For example: billable service in the case or preformed organizational unit for each service.).We didn't succeed to it by using the ISH_CHARACTERISTIC_* functions.
2.     Costs:
We tried to posts case costs (internal activity allocation) directly to profitability analysis, this way we hope to have the ability to derive characteristic of the line item.
We know that when we use transaction: KB21N for internal activity allocation and we define two receivers, internal order and profitability segment- In case the order will be statistical the true posting will be to profitability analysis segment.
Therefore we have defined the case based order as statistical order.
We want to intervene in the automatic creation of account assignment lines by enhancement NHCO0001 IS-H: Create account asgmt. line during CO transfer.
The transfer program creates for CO-relevant services account assignment lines for Assignment rules.
But-We didn't find any way to do it, because the profitability segment object is missing in enhancement NHCO0001.
As an alternative we tried to use User-Exit in the profitability analysis valuation (transaction: ke4u) but also with no success. (Enhancement COPA0002).
Could you Please advice what to do,I didn't succeed in my ideas and investigations.
Thanks
Yael Jacobi
Controlling Consultant

HI Claudius
Thanks for your answer, I will try to discuss it again with my customer to understand weather he really needs/wants a profitability analysis on service level.
I processed also an inquiry within the Service Remote Consulting according , I will let you know their answer as well.
I have additional issue to discuss with you , please let me know wheatear you can help me.
There are internal service sales between different departments in the same medical center. For example: Radiology center/department sells X-rays services for the cardiology center. We need the ability to sell a service to a different department in a different price than to an external payer/customer/insurance provider.
Is it possible to implement profit center transfer prices along with the ISH_CO integration?,
How is it getting along with the posting of internal activity allocation when services transfer to Controlling?
At standard the costs are allocated (by means of internal activity allocation) between profit centers. The responsible cost center (assigned to the performing organization unit) is credited and the case based order (which is assigned to different profit center) is debited.
Is it possible to implement transfer prices in case the performing organizational units are connected to the same profit center? (because some of departments are subdivided to several medical organizational units; and each unit represents a different cost center at the same profit center/department).
Do you recommend defining a different profit center also for each sub-department?
Do you have any other proposed solution for this issue?.
Thanks,
Yael

I'm trying to import some Hi8 into FCPX via a Canon GL2. Although the footage shows up in the import window, it says "Camera not controllable". The manual import button does activate, but footage is not actually being imported. Any ideas? Thanks

I'm trying to import Hi8 into FCPX via a Canon GL2. Although the footage appears in the import window, it says camera not controllable. The manual import buttons activate, but the footage is not actually importing. Any ideas? Thanks so much.

What Tom said.
Or you may be able to import using a different program - try with Quicktime Player, "New Movie Recording". If the camera appears as an option, it should work.

Invoking C# WS from java axis proxy generated from the same WSDL

I am trying to transparently use the same java interface for invoking a java axis WS and a C# WS generated from the same WSDL interface.
I believe the problem may be that the .NET web service which is generated from the WSDL file, is dynamically exposing a WSDL file which is not exactly the same as the original WSDL used to generate the abstract C# class with "wsdl.exe"
When I try to invoke the C# web service with the java axis client I get the error message:
"Server did not recognize the value of HTTP Header SOAPAction: ."
Any suggestions about how to be able to use the same client interface from java, to invoke a C# web service and a java axis web service supporting (i.e. generated from) the same WSDL ?

The JNI method name in the .h file is different to that in the .c file.

Utility Airport can't see Airport Express on my MacPro, although the same AE operates properly with a MacBook Pro

I've unsuccefully spend almost three days on the web to find the solution to a particular problem.
The configuration I'm running is as follow:
- one Airport Express attached to the Orange box to communicate through internet
- one printer attached to the AE through USB
Two Mac :
- one MacBook Pro : it operates with no problem using the AE and the printer, internet is fine since I write this message with that Apple. The two machines may operate simultaneously under different or identical softwares.
- one Macpro : two points:
* the Airport utility does not see the Airport Express, but the AE logo is fully active on the computer and I can read information with Preferences/Network.
* the Network diagnostic, launched from the MacPro, yields GREEN from Airport to FAI included steps ( green LED), but fails at the Internet step (red LED)
The computers are in the same bench, the AE being at 2 meter distance with no shield in between.
The Orange box is proved fine since all the internet communications are OK when I use the MacBook Pro . The phone is fine as well.
There are no other WiFi in the neighbourg.
The problem occured on Sunday evening for an unclear reason, while I was trying to connect a window XP based PC to link to the printer using the same wireless network ( I miserably fail as well, although the PC sees the Airport Express, but no way to connect to the printer : this is another issue )
The full network is running permanently for a couple of years with no issue, no fault, no reset, no slow down, just fine !
Both machines use the same OSX 10.6.8.
Information system returns the same data when reading the Airport network file.
Of course, the Airport Express yields solid Green light .
I've already checked the trouble shoot procedures as recommended by Apple with no success.
Well, this is a major issue since I do need my MacPro to handle work that must go through the internet.
Any advise and/or recommendation will be highly appreciated.
Michael

Hello,
Finally, I solve the issue by re loading the mDNSResponder which has been deactivated for an unknown reason. The system is back to normal operation.Thank so much to the Krypted.com site to provide the appropriate command to handle theplist file.
Michael

Drilling via Hierarchy - how to display upper levels of the hierarchy??

Hi all.
I'm using Discoverer 10.1.2
I have a worksheet which contains only one Pie graph.
Users can drill down and up by clicking on the slices of the graph, because I definied Hierarchy in the Administrator.
Everything's fine, but when drilling down you can't see through which values of upper levels of the hierarchy you go..
For example assume the pie graph displaying three slices for warehouses 1,2 and 3.
User clicks on slice 2. Discovere re-run query with new condition warehouse=2 and displays new pie graph which shows four slices for Items a,b,c and d.
That's fine user can see there are four items on the selected warehouse and there is some amount of each of these items.
But he can't see which warehouse was selected!!!
Discoverer only adds new condition to the source sql query but I have no chance to display these conditions on worksheet.
Discoverer Plus enables to add "Axis Items", "Data points",etc in the graph title.
In the Legend of the Graph there is a Column name of the upper level of the hierarchy but not its value (in my example there would be Legend displaying slice colors for items a,b,c,d and link to "warehouse") I would Like to see current warehouse number (e.g. 2 in above example) too!!
Any workaround???
Thanks a lot.
Jakub

Hi Jakub
In releases prior to 10.1.2 users really had no choice but to drill to detail. However, with the release of hyper drills in 10.1.2 the situation has changed. Most of my customers now use hyper drills and wondered how they ever got by without them. Using hyper linked workbooks allows you to create a library of workbooks that all interlink to each other, up and down the chain.
Thus a user can jump into the chain anywhere they like and the system should let them link up or link down. When done properly you end up with a library. Now take this one step further and make the library owner a generic user called something like ACCOUNTS PAYABLE. You can now have a library of accounts payable workbooks, workbooks that have been shared with either the ACCOUNTS_PAYABLE role or responsibility.
Does this help see the direction I take?
Regards
Michael

How to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area

how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
ananya

Hey Ananya,
I believe what you want to do is possible, but it will not be
easy. If you want to add a scroll bar that will scroll the graph
back and forth but keep the axis set, you would want to add a
horizontal or vertical scrollbar. Then you would create an event
handler for the scroll event. You would have to manually plot
different data within this scroll event. Unfortunately, there is
not really a built in way to do this with the Measurement Studio plot
control.
Thanks,
Pat P.
Software Engineer
National Instruments

DigitalGraph Annotation at different axis-Y level although the value is same

Similar Messages

Maybe you are looking for