Dimension build error codes

Does anyone have a list or know where I can find a list?
I'm seeing 3307 and 3315 and need to figure out what that is causing them
Thanks!

Hi,
There isn't a list for the dimbuild error codes that I know of. They don't even appear in the message.txt file that comes with the API install.
Maybe if you paste the whole line of the error we might be able to help a bit more.
Google found a couple of examples which might steer you in the right direction:
\Record #234 - Property [FAC: Unknown | AMER] changes for member [FAC-1234 | AMER] not allowed (3315)
\\Record #2 - Incorrect Parent [600-20] For Member [600] (3307)
Gee

Similar Messages

Urgent: dimension build error.

Hi folks,
While running dimensin build , i have got the below errors.
ERROR - 1007083 - Dimension build failed. Error code [1250029].
ERROR - 1241101 - Unexpected Essbase error 1007083.
Please let me know what could be the reason to create these errors.
I really appreciate your help on the same.
thanks,

Hi,
1. Request to let us know the whats in the log file.
2. Cant be sure about the error , but found a similar error code in other case .
http://businessintelligence.ittoolbox.com/groups/technical-functional/hyperion-bi-l/hyperion-essbase-error-code-1250029-3109331
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Essbase Studio Deployment Dimension Build Errors

I have a ASO cube used to handle Subsidiary financial reporting to parent. Rather than alternate hierarchies, we use attribute dimensions for yearly differentiation. The ASO cube typically holds information for Current year + 3 prior years. This is the first year that we will achieve this as this cube was created near the beginning of 2010. Therefore, with the cube already having attribute dimension for 2010 & 2011, with the beginning of 2013 it is necessary to create the 2012 attribute dimensions. The cube has 13 anchor dimensions. Typically only 4 of these dimensions have attribute dimensions derived from them. Nonetheless, the following is the build list of the dimensions in the essbase model:
1: Financials Standard, Dynamic, Sparse
2: GL Date Time, Stored, Sparse
3: Incident Date Standard, Stored, Sparse
4: View Standard, Dynamic, Dense
5: Company Standard, Multiple-hierarchy, Sparce
6: Well location Standard, Stored, Sparse
7: Depletion Code Standard, Stored, Sparse
8: Vendor Standard, Stored, Sparse
9: Entity Standard, Stored, Sparse
10: Profit Center Standard, Stored, Sparse
11: Curr Yr Cost Obj Standard, Stored, Sparse
12: Past Yr Cost Obj Standard, Stored, Sparse
13: Measures Accounts, Dynamic, Existing
Attribute dimensions are mainly created in 4 of the Defined Hierarchies with in the cube; 1:FINANCIALS, 5:COMPANY, 6:WELL Location, & 10:PROFIT CENTER.
According to the Essbase Server log, upon deployment, the FINANCIALS Hierarchy generates 19 Dimension Build rule files with the associated SQL to pull members from our SQL Dimension Build tables obviously based on the way the Hierarchy is built as well as the joins created in the MiniSchema in the referenced Data Source. The COMPANY Hierarchy generates 5 Dimension Build rule files, WELL LOCATION generates only 1 Dimension Build rule file (this is mainly due to the fact that all the attributes generated from WELL LOCATION are built from the same table), and PROFIT CENTER Generates 3 Dimension build rule files. At this point for comparison purposes I want to include excerpts from the Server Deployment Log file depicting the dimension build rule files generated from the PROFIT CENTER Hierarchy:
Rule 1 Labeled XXXX_PRO.rul
… FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center] cp_319 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 ON (cp_319.[profit_center_code]=cp_328.[profit_center_code]) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
Rule 2 Labeled XXXX_PR1.rul
… FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center_2010] cp_275 ON (cp_275.[profit_center_code]=cp_328.[profit_center_code_2010]) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
Rule 3 Labeled XXXX_PR2.rul
FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center_2011] cp_276 ON (cp_276.[profit_center_code]=cp_328.[profit_center_code_2011]) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
These Dimension Build rule files are recreated nightly on 4 different production servers, each one successfully redeploying nightly with zero errors.
So now I need to add the new 2012 tables to the Data Source/MiniSchema, create the joins in the MiniSchema mimicking the joins for the 2010 & 2011 Attribute Dimensions. It would be difficult to demonstrate the joins in the MiniSchema but trust me they are there and this is proven by the additional Dimension Build rule files from the appropriate Hierarchies.
So on our test server, which is configured exactly like all 4 of our production servers, I have begun the creation of the 2012 attribute dimensions. I begin with the FINANCIALS Hierarchy adding 7 new attribute dimensions, 6 that are cross table and one that is inter-table.
At this point no changes have been made to any of the other 3 Hierarchies that contain Attribute dimensions; COMPANY, WELL LOCATION, or PROFIT CENTER. They still look exactly as they did in the current state discussed above. Upon deployment, the FINANCIALS Hierarchy generates , as expected 25 Dimension Build rule files, 6 additional because only 6 were cross table attributes, the 7th was within the anchor table and therefore would be included in the first dimension build rule file. COMPANY still generates 5 Dimension Build rule files, again as expected. WELL LOCATION still generates only the 1 Dimension rule file also as expected. Lastly, PROFIT CENTER also again only generates the 3 Dimension Rule files, however, one has materially changed as noted below:
Rule 1 Labeled XXXX_PRO.rul
…FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center] cp_319 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 ON ((cp_319.[profit_center_code]=cp_328.[profit_center_code]) AND (cp_328.[profit_center_code]=cp_319.[profit_center_code])) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
Rule 2 Labeled XXXX_PR1.rul (This one did not change)
…FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center_2010] cp_275 ON (cp_275.[profit_center_code]=cp_328.[profit_center_code_2010]) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
Rule 3 Labeled XXXX_PR2.rul (This one did not change)
…FROM [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_company_acct] cp_328 INNER JOIN [Essbase_XXXXX].[dbo].[vw_essbase_XXXXX_profit_center_2011] cp_276 ON (cp_328.[profit_center_code_2011]=cp_276.[profit_center_code]) ORDER BY cp_328.[profit_center_code] ASC, cp_328.[company_minor_acct] ASC`.
The change in Rule 1 above appears to now require something different from the previous deployment and when we run the deployment now it runs forever and ultimately fails, yet no changes have been made to the Hierarchy, no changes have been made to the MiniSchema involving joins to the tables used in the building of the Hierarchy, and no new tables have been added to the data source that would affect this Hierarchy.
Additionally, I have also run each of these incrementally, and the PROFIT CENTER even incrementally still makes the change to the SQL statement shown above.
So finally, to my question, Why and What caused this Dimension Build Rule file to change and ultimately led to deployment failure? Has anyone ever encountered this in Essbase Studio Deployments?

Gurus, anybody anything on this one??
I haave done a small adjustment in the dimension order by which I have eliminated the following error:
Record #40 - Error adding Dynamic calc property to member xxxxxxxxx (3320)
Record #40 - No time dimension defined
But, I have the following new error/warning (cube build successfull in this case) when I made this adjustment:
Record #427 - Error adding Attribute to member PATB4_ADJ-PDA (3320)
The adjustment I made is... I moved TIME dimension up and ACCOUNT dimension below that...so the order I have now is TIME,ACCOUNT,SCENATRIO,XXX,XXXX instead of ACCOUNT,TIME,SCENARIO,XXX,XXXXX ..*would this create any performance issues?*

DPS APP Builder Error Code 1

Hello,
I'm getting an Error Code 1 message when trying to download the test APP from the DPS APP Builder. I've tried re-building the document (a process that takes almost 8 hours in my case as our APP features 110 articles including almost 1000 images), updating it, generating new certificates and any other workaround mentioned in a previous discussion about this same subject. Nothing worked for me.
The only workaround I haven't tried is deleting the folio from ~/Library/Preferences/StageManager.BD092818F67280F4B42B04877600987F01 11B594.1/Local Store/dmp.
Apparently, there's nothing called "StageManager" in my MacBook Pro. Not in this route neither in any other route.
Any idea about how to solve this? (if possible without re-building once again the whole document) We can't wait until the error code 1 bug is fixed in future Adobe updates as we need to submit the APP to Apple next week.
Thanks for your time.

Anyone can help??
Update my latest experimental results.
I found that issue was folio package related.
Because when I use another folio package to the same app item in App Builder, this error message does not appear.
But the original package in exchange, this error information occurs.
Are there helpful to solve this problem?

Application builder error coder 21

I get this error code when trying to build an application and include the visa runtime install files
What can i do to fix this error
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Validating...
Copying files...
Scanning files...
Updating files...
Build complete successfully.
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'LabVIEW 2009, Media 1' from: \\dtads2\it_software$\Labview 2009\DVD 1 of 2\Distributions\LabVIEW\LabVIEW2009\ to: C:\Documents and Settings\brockmaa\Desktop\11164 Carnivore\builds\FVT1_4 test\My Installer\
Copying distribution 'National Instruments Device Drivers - February 2010' from: C:\National Instruments Downloads\NI Device Drivers\Feb10\ to: C:\Documents and Settings\brockmaa\Desktop\11164 Carnivore\builds\FVT1_4 test\My Installer\
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
*** Error: An internal tool or library returned an error. (Error code -21)
Error Messages
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper32.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-ORB' not found for part 'niorbi.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-ORB {F2D3406A-0A97-4EB9-9A09-F20A874C16F9}.xml'.
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-ORB' not found for part 'niorbi64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-ORB {F2D3406A-0A97-4EB9-9A09-F20A874C16F9}.xml'.
*** Error Details:
Error in MDF API function: _MDFBuildDist_Build
Error List
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'NIVISAruntime64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper32.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-VISA_Runtime' not found for part 'VisaSharedComponentsWrapper64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-VISA Runtime 4.6.2 {BEB32B6A-2984-40F3-B24E-DB29311A1DD2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\TDMS' not found for part 'tdms64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI TDM Streaming 2.0 {3DAA4182-08B7-45D9-8620-6B0E13018670}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2008MSMs\VC2008MSMs' not found for part 'VC2008MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2008MSMs {4219AAB9-43BA-4085-8A42-78644B9F96D2}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x86.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\VC2005MSMs\VC2005MSMs' not found for part 'VC2005MSMs_x64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI VC2005MSMs {63E19B33-DD24-4EAB-9E77-6735C2171CE4}.xml'.
While validating input parts.
.\InputParser.cpp(365): InstallerError 120
Input directory 'C:\National Instruments Downloads\NI Device Drivers\Feb10\Products\NI-PAL' not found for part 'palSetup.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL {79F90480-F2A2-463A-943C-29046520D6BC}.xml'.
While validating input parts.
and so on

Hi brockmaa,
It seems that the files it needs to include the VISA runtime are not being found on your system. Try re-installing the correct version of VISA you need from:
http://www.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:du,n8:3.25.123.1640,ssna...
and try to build the installer again and it should be able to find the correct files.
DylanC

Dimension Building Error

Hi
While Dimension Building process in EPM 11 i am getting the below error:
ERROR - 1042012 - Network error [32]: Cannot Send Data.
ERROR - 1010003 - The data block size of database [Drxxxxxx] exceeds the limit [268435455].
ERROR - 1241101 - Unexpected Essbase error 1010003.
kindly suggest for above.

I think the error describes the issue very well, your block size is a monster and you need to tame the beast :)
Cheers
John
http://john-goodwin.blogspot.com/

Installer build error code-21 Labview 8.6.1

While attempting to build an installer I get an error code -21. What is the error and how do I correct it?

I also have this problem. The executable build itself works correctly, but the installer fails to build. There are a number of DLL dependencies, but they are all included and present in the build and in the installer Source Files. I put CDK.EnableLog=True in my LabVIEW.ini and logged the error from the installer build process. Here is an excerpt from the relevant section:
 [LOG ON] Fri Apr 30 13:46:02 2010
<<<MDFConfig_SetDeveloperLanguage>>> Language id: 9
<<<MDFConfig_SetDistributionLanguage>>> Language id: 9
<<<MDFConfig_SetBuildDir>>> Build directory: C:\MyPrograms\MyApp_Working\Install
<<<MDFConfig_SetBuildMode>>> Build mode: 1
 [NMDK BEGIN] Fri Apr 30 13:46:02 2010
 Building developer part
> Adding files to installer
<<<MDFBuildDevPart_SetFileNames>>>
<<<MDFBuildDevPart_SetDefaultInstallDir>>>
<<<MDFBuildDevPart_SetUpgradeInfo>>>
<<<MDFBuildDevPart_SetOtherProperties>>>
>
> **************
> *** Error: An internal tool or library returned an error. (Error code -21)
Error in MDF API function: _MDFBuildDevPart_SetOtherProperties
nmdkSetInformationalProperties returned error code 26024
> *** End Error Report
> **************
>
Adding product dependencies to developer part
>
> **************
> *** Error: Windows SDK function returned an error. (Error code -12)
Closing dist kit
***** About to begin MAXImportConfig:oMAXPartModifications...
No MAX import files specified - nothing to do - returning.
Error in MDF API function: _MDFBuildDevPart_Close
Error in MDF::BuildDeveloperPart::Close.
ERROR: Caught MSI Exception:
<Unable to format error record.>
MSI error code: 6
> *** End Error Report
> **************
>
 [LOG OFF] Fri Apr 30 13:46:02 2010
 [MDF END] Fri Apr 30 13:46:02 2010
 Closing MDF.
I've also tried the same with a simple test application and it build/installs correctly, so I know it is my project somehow. One notable difference is that I previously had namespace conflicts in the executable build that were resolved by the following these instructions:
http://digital.ni.com/public.nsf/allkb/47272B69E2C167DB862574AC006A258B?OpenDocument
I hope someone can help. I need to deploy this application soon.
Regards,
- Ray

Ignore dimension build error Incorrect Parent For Member (3307)

Hello,
Is it possible to ignore the following error:
Incorrect Parent [XYZ] For Member ABC (3307)
The error appears because the member is in outline already. Is there a way to ignore that error?
Thanks in advance

The reason for the error is you have multiple rows in your dimension build file with conflicting information. One row says to associate the member with parent A and another row says to associate it with Parent B. TimG's suggestion to set them ember to allow moves would get rid of the error, but the member will be associated with the last row in your data. If you do not allow moves (as it appears you have) there is no way to turn off the error. In your case it is what I call a soft error, you know about it, but don't want to do anything about it. I would suggest you clean up your data so it does not cause this issue. It is troublesome to me when the incoming data has this type of inconsistency and the solution is to ignore it

Essbase Dimension build error and Unable to Stop/Start Application

Hi All,
I am trying to build the dimendion in the ASO application it is throwing the Error meaasage " Dimension Biuld failed , ther may be problem in allocating memory".
While i am trying to and Start/Stop my respective Application it is throwing the below error meaasge
I tried to debug this issue by checking the Locked objects, and asked my Admin to close my sessions forcebully if any running and also checking all rules files . But i didn't get any clue/solution from them.
Please help me out from this issue
***ess-dev.ASOAPP     Stop application     April 15, 2009 4:15:08 PM IST     Failed***
***Error: 1013018 Cannot unload database [Sample] while user [ASDF] is performing database operation. Wait for user [ASDF] to complete the operation, or ask the user to abort it. Log out all users and then unload the database.***
***     MaxL Command     April 15, 2009 4:40:52 PM IST***
***Error: 1053012: Object [Sample] is locked by user [ASDF]***
***Error: 1013100: User [ASDF] is Active on Database [Sample]***
***Error: 1013132: Cannot build dimensions. There are other active users on database [Sample]***
***Error: 1241101: Unexpected Essbase error 1013132***
***Error: 1053013: Object [Sample] unlocked by user [ASDF]***
***     MaxL Command     April 15, 2009 4:43:28 PM IST***
***Error: 1270040: Data load buffer [2] does not exist***
Regards

Hi,
Thanks for your answer friend. My admin has successfully killed my session forcebully. And he doubted that i may not have enough rights to Stop/Start application and he provided me the required rights. After that also the error is repeating as below. we two are not getting where we went wrong.
ss-dev.ASOAPP     Stop application     April 15, 2009 8:19:35 PM IST     Failed
Error: 1013018 Cannot unload database [Sample] while user [ASDF] is performing database operation. Wait for user [ASDF] to complete the operation, or ask the user to abort it. Log out all users and then unload the database.
Help me out from this issue

Urgent - Dimension Build Error - Maxl Editor

I have the following Statement import database 'ASOmkv5'.'ASOmkv5' dimensions from data_file timedim using rules_file ASOmkv5 on error write to 'ASOmkv5_logfile'; I get the following Errors Object [ASOmkv5] is locked by user [jtest] Object [57774682] is locked by user [jtest] Cannot access object: ASOmkv5.rul Object [57774682] is unlocked by user [jtest] Unexpected Essbase error 1030200 Object [ASOmkv5] is unlocked by user [jtest] 

I suspect that it is not finding your rules file. Try modifying the line to add "server" as in using server rules_file 'ASOmkv5' , also, single quoting the filename is probably a good practice. I'm always careful about using the "server" keyword when using any file from a source in the database directory. I work on a Windows server and have found that MAXL is sometimes a little erratic in parsing filenames. Escaping backslashes can be a particular problem. In your example, I'd try the server file location first.

Problem with dimension build

I am trying to build dimensions for a bso cube using Maxl in version 11. I have both the rules file and the textfile in the server. But I am getting the following error.
import database 'CNFIN1'.'CNGL' dimensions from data_file 'G:\Hyperion\products\Essbase\EssbaseServer\bcpfiles\CNFIN1\CNMarket.txt' using rules_file 'G:\Hyperion\products\Essbase\EssbaseServer\app\CNFIN1\CNGL\GLMktD.rul' on error write to 'G:\Hyperion\products\Essbase\EssbaseServer\log\CNFIN1\CNGL\MktD.err';
OK/INFO - 1053012 - Object [CNGL] is locked by user [US0T4235].
OK/INFO - 1053012 - Object [93547618] is locked by user [US0T4235].
ERROR - 1007083 - Dimension build failed. Error code [1090037]. Check the server log file and the dimension build error file for possible additional info..
OK/INFO - 1053013 - Object [93547618] unlocked by user [US0T4235].
ERROR - 1241101 - Unexpected Essbase error 1007083.
OK/INFO - 1053013 - Object [CNGL] unlocked by user [US0T4235].
Guys can you help me..Thanks in advance

First, have you tested this build manually through EAS? Confirm that you can run the dim build manually to eliminate the load rule as a variable that is causing the problem.
Next, below is a new version of the mxl statement that should work. I altered the syntax to use a server rules_file because the load rule is store in the db directory and you do not need to reference the path or file extension. Also, the backslash is a special character in mxl and needs to be preceded by a backslash. Mxl interprets two backslashes as one.
import database 'CNFIN1'.'CNGL' dimensions from data_file 'G:\\Hyperion\\products\\Essbase\\EssbaseServer\\bcpfiles\\CNFIN1\\CNMarket.txt' using server rules_file 'GLMktD' on error write to 'G:\\Hyperion\\products\\Essbase\\EssbaseServer\\log\\CNFIN1\\CNGL\\MktD.err';
Good Luck!

Error code 1127 when using teststand deployment utility

I'm have installed on my pc Teststand 3.0 and labview 7.0 -this error occurs during build
Error Code:1127
Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
Open VI Reference in TestStand - Dist Chg and Save VIs.vi->TestStand - Dist Build LLB Image.vi->TestStand - Build VI Distribution.vi->TestStand - Build VI Distribution AX Wrapper.vi->TestStand - Build VI Distribution AX Wrapper.vi.ProxyCaller

>>>>>>>ok, I'm getting a different error code: error code 7 instead of a error code 1127 with the error:
Error Code:7 Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW
error: Invoke Node in TestStand - Dist Cmp Settings to Disk Hier.vi->TestStand - Build VI
Distribution.vi->TestStand - Build VI Distribution AX Wrapper.vi->TestStand - Build VI
Distribution AX Wrapper.vi.ProxyCaller
>>>>>>>>And I did a mass compile of the directory mentioned above and I got this error:
#### Starting Mass Compile: Thu, Jul 15, 2004 9:44:04 PM
Directory: "C:\Program Files\National Instruments\TestStand
3.0\Components\NI\Tools\Deployment Utility"
CompileFolder: error 13 at C:\Program Files\National Instruments\TestStand 3.0\Compon
ents\NI\Tools\Deployment Utility\DeploymentUtility.exe
#### Finished Mass Compile: Thu, Jul 15, 2004 9:44:17 PM

Teststand deployment with LabView VI gives error code 1035

Using Teststand 3.0 deployment tool. My test sequence uses LabView 7.0 VIs. When I build, error code 1035 is output after several minutes along with the message :-
Error Code:1035
Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. Labview error:
Invoke Node in Teststand - Diost Chg and Save VIs-> TestSTand - Dist Build LLB Image ->TestStand - Build VI
Distribution.vi->TestSTand - Build VI Distribution AX Wrapper.vi-> TestStand - Build VI DIstribution AX Wrapper.vi.ProxyCaller
++++++++++++++++++++++++
I tried a LabVIEW mass compile of my VI directory and it reported no errors.
I have tried this website for an explaination of this error but there appears to be nothing. System is Windows N
T4 SP6.

Jon, you mentioned this problem got solved in TestStand 3.1. Right we are using TS 3.0 and have that problem caused by LabView's own locked VI's (not to mention LabView VIs with the "/" character in the filename, i had to save those under a different name) . Is there any documention about this problem being fixed in 3.1? This would help me explain the need for the upgrade to the powers that be.
Thanks,
Fernando Marquez
Project Engineer
CSI
Jon Bowers wrote:
There can be a problem in Teststand 3 when deploying with the "Lock vi Diagrams" option checked when your sequence contains vi's that already have locked diagrams. Un-checking this option or removing the vi's which have locked diagrams should allow you to build successfully. This has been fixed in Teststand 3.1.
Jon Bowers
Applications Engineer
NIUK

Need help in getting pxi-7854R to build simple code, returns error:-63040

Hi
Trying to build a labview program, which just reads AIO on the pxi-7854R board that is installed in a PXIe=1062Q
Can you help?
below is the error message:
Error Code: -63040
NI-RIO: (Hex 0xFFFF09C0) A connection could not be established to the specified remote device.
Ensure that the device is on and accessible over the network,
that NI-RIO software is installed, and that the RIO server is running and properly configured.
For NI-RIO 2.3 and later, refer to Software>>NI-RIO>>NI-RIO Settings under the system in MAX.
Prior to NI-RIO 2.3, refer to Software>>NI-VISA>>VISA Options under the system in MAX.

Which NI-RIO driver version do you have installed? Also, this KnowledgeBase article may be helpful in narrowing down the issue:
http://digital.ni.com/public.nsf/allkb/83DF7B9245541FC8862573A100597696?OpenDocument
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Build error when using custom error codes

When I try to build my application using custom error codes I receive the following error:
Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.

Hi Donovan,
The attached project is giving me the error previously discussed. Thanks for your help.
Attachments:
BuildError.zip ‏10 KB

Dimension build error codes

Similar Messages

Maybe you are looking for