Dimension processing error: "duplicate id detected"
Hi All,
Im facing an issue where when i try to process a dimension, i get an error message ."error while processing dimensions"
"duplicate id detected" .The reason for this is there are two identical id's with in the same dimension. "pu" & "PU".
Im not able to root cause, how BPC allowed processing of these identical dimensions in the first place. But becoz of this, whene ever i try to add a new dimension member and process the same, i get the above mentioned error.
Have you ever encountered this error in your applications.
If so, what is the way out?
Also, Is there a solution ,which does not involve deleting & re-creating the dimensions.
Thanks in advance,
sridhar
Hi Sridhar,
Best way is delete both the line and process it. The wild fact in BPC is that if if you have used ABC as dimension member in cost center, you can not have same name as dimension member in profit center as well.
Is it not wild? So best way is delete the dimension member..but if you have posted some transaction data u have to delete the transaction data first..
Similar Messages
-
Date Dimension processing error
Hi
I am currently attempting to apply attribute relationships and a Hierarchy to my date dimension. Please see images 1 and 2 attached.
The error that is being displayed is Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'BI_DimDate', Column: 'CalenderMonth', Value: '09'. The attribute is 'Calender Month'.
Any ideas as to what is going on?
Thanks in advance.Hi Warnerrj79,
For this error:
Errors in the OLAP storage engine: A duplicate attribute key has been found when processing: Table: 'dbo_DimDate', Column: 'CalendarQuarter', Value: '4'. The attribute is 'Calendar Quarter'. 0 0
There are many reasons that can cause this issue, here are some blogs which list the reasons and explanation, please refer to the links below to see the details.
http://ms-olap.blogspot.com/2009/11/duplicate-attribute-key-has-been-found.html
http://blog.oraylis.de/2013/08/a-duplicate-attribute-key-has-been-found-during-processing-revisited/
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support -
Inbound IDOC processing, error duplicate key
We want to retrieve certain order-idocs in our system, before they are processed, to change AND insert segment data.
Flow we use in our current program
- DOC_STATUS_WRITE_TO_DATABASE
to change the status of the idoc (ok) (status 69)
- EDI_DOCUMENT_OPEN_FOR_EDIT (ok)
- EDI_CHANGE_DATA_SEGMENTS (ok)
- EDI_DOCUMENT_CLOSE_EDIT => not ok
This program gives SAPSQL error
Via debugging, we see that a new idoc number is
called (save as backup idoc ?), but we want the
current IDOC to be processed.
The system wants to insert in EDID4 => dump :
"Use an ABAP/4 Open SQL array insert only if you
are sure that none of the records passed already
exists in the database."
( I prefer to use these standard functions, in stead of just deleting and inserting into "EDID4" )
regards,
answers will be rewarded.
code extract
INCLUDE ZBE01458_TOP.
INITIALIZATION.
V_EDIT_STATUS = '69'.
V_PROCESSED_STATUS = '32'.
start-of-selection.
clear t_edidc. refresh t_edidc.
SELECT * FROM EDIDC into table t_edidc
WHERE DOCNUM in S_docnum
and mestyp in S_mestyp
and idoctp in S_idoctp
and credat in S_credat
and rcvpor in S_rcvpor
and rcvprt in S_rcvprt
and rcvprn in S_rcvprn
and sndpor in S_sndpor
and sndprt in S_sndprt
and sndprn in S_sndprn
and status in S_status.
loop at t_edidc.
move t_edidc-docnum to v_docnum.
refresh v_status.
V_STATUS-docnum = V_DOCNUM.
V_STATUS-status = V_EDIT_STATUS.
clear EDIDS.
select single * from EDIDS where docnum = v_docnum.
if sy-subrc = 0.
MOVE EDIDS-STACOD to V_STATUS-STACOD.
endif .
APPEND V_STATUS.
PERFORM CHANGE_IDOC_STATUS tables V_STATUS USING V_DOCNUM.
changing part for DEDIDD "idoc data
PERFORM OPEN_IDOC_FOR_CHANGE.
PERFORM CHANGE_IDOC.
PERFORM CLOSE_IDOC_FOR_CHANGE.
refresh v_status.
V_STATUS-docnum = V_DOCNUM.
V_STATUS-status = V_PROCESSED_STATUS.
APPEND V_STATUS.
PERFORM CHANGE_IDOC_STATUS tables V_STATUS
USING V_DOCNUM.
endloop.
*& Form OPEN_IDOC_FOR_CHANGE
text
--> p1 text
<-- p2 text
FORM OPEN_IDOC_FOR_CHANGE.
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
EXPORTING
DOCUMENT_NUMBER = V_DOCNUM
ALREADY_OPEN = 'N'
IMPORTING
IDOC_CONTROL =
TABLES
IDOC_DATA = DEDIDD
EXCEPTIONS
DOCUMENT_FOREIGN_LOCK = 1
DOCUMENT_NOT_EXIST = 2
DOCUMENT_NOT_OPEN = 3
STATUS_IS_UNABLE_FOR_CHANGING = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " OPEN_IDOC_FOR_CHANGE
*& Form CHANGE_IDOC
text
--> p1 text
<-- p2 text
FORM CHANGE_IDOC.
CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
TABLES
IDOC_CHANGED_DATA_RANGE = DEDIDD
EXCEPTIONS
IDOC_NOT_OPEN = 1
DATA_RECORD_NOT_EXIST = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CHANGE_IDOC
*& Form CLOSE_IDOC_FOR_CHANGE
text
--> p1 text
<-- p2 text
FORM CLOSE_IDOC_FOR_CHANGE.
CLEAR t_EDI_DS40.
t_edi_ds40-docnum = v_docnum.
t_edi_ds40-status = '51'.
t_edi_ds40-repid = sy-repid.
t_edi_ds40-tabnam = 'EDI_DS'.
t_edi_ds40-mandt = sy-mandt.
t_edi_ds40-stamqu = 'SAP'.
t_edi_ds40-stamid = 'B1'.
t_edi_ds40-stamno = '999'.
t_edi_ds40-stapa1 = 'Changes made to idoc ...'.
t_edi_ds40-stapa2 = t_new_kunnr.
t_edi_ds40-logdat = sy-datum.
t_edi_ds40-logtim = sy-uzeit.
APPEND t_edi_ds40.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
EXPORTING
DOCUMENT_NUMBER = V_DOCNUM
DO_COMMIT = 'X'
DO_UPDATE = 'X'
WRITE_ALL_STATUS = 'X'
TABLES
STATUS_RECORDS = t_EDI_DS40
EXCEPTIONS
IDOC_NOT_OPEN = 1
DB_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CLOSE_IDOC_FOR_CHANGE
*& Form CHANGE_IDOC_STATUS
text
--> p1 text
<-- p2 text
FORM CHANGE_IDOC_STATUS tables P_IDOC_STATUS structure V_IDOC_STATUS
USING P_DOCNUM.
CALL FUNCTION 'IDOC_STATUS_WRITE_TO_DATABASE'
EXPORTING
IDOC_NUMBER = p_docnum
IDOC_OPENED_FLAG = ' '
NO_DEQUEUE_FLAG = 'X'
IMPORTING
IDOC_CONTROL =
TABLES
IDOC_STATUS = P_IDOC_STATUS
EXCEPTIONS
IDOC_FOREIGN_LOCK = 1
IDOC_NOT_FOUND = 2
IDOC_STATUS_RECORDS_EMPTY = 3
IDOC_STATUS_INVALID = 4
DB_ERROR = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
else.
commit work.
ENDIF.
ENDFORM. " CHANGE_IDOC_STATUSUrmila,
I tried this sequence : code extract follows...
I got the duplicate key errors again.
what about delete first and then insert again in EDID4 table ?
source code extract:
INCLUDE ZBE01458_TOP.
INITIALIZATION.
V_EDIT_STATUS = '69'.
V_PROCESSED_STATUS = '32'.
V_SAPCODE = 'SAPE0184'.
start-of-selection.
clear t_edidc. refresh t_edidc.
SELECT * FROM EDIDC into table t_edidc
WHERE DOCNUM in S_docnum
and mestyp in S_mestyp
and idoctp in S_idoctp
and credat in S_credat
and rcvpor in S_rcvpor
and rcvprt in S_rcvprt
and rcvprn in S_rcvprn
and sndpor in S_sndpor
and sndprt in S_sndprt
and sndprn in S_sndprn
and status in S_status.
loop at t_edidc.
move t_edidc-docnum to v_docnum.
move-corresponding T_EDIDC to WA_EDIDC.
V_STA-docnum = v_docnum.
V_STA-status = '51'.
V_STA-repid = sy-repid.
V_STA-tabnam = 'EDI_DS'.
V_STA-mandt = sy-mandt.
V_STA-stamqu = 'SAP'.
V_STA-stamid = 'B1'.
V_STA-stamno = '999'.
V_STA-stapa1 = 'Changes made to idoc ...'.
t_edi_ds40-stapa2 = t_new_kunnr.
V_STA-logdat = sy-datum.
V_STA-logtim = sy-uzeit.
V_STA-STACOD = V_SAPCODE.
PERFORM OPEN_FOR_PROCESS.
PERFORM SET_IDOC_STATUS USING V_DOCNUM V_STA.
PERFORM CLOSE_IDOC_FOR_PROCESS.
PERFORM OPEN_IDOC_FOR_CHANGE.
PERFORM PROCESS_IDOC_STRUCTURE.
PERFORM CHANGE_IDOC.
PERFORM CLOSE_IDOC_FOR_CHANGE.
refresh v_status.
V_STATUS-docnum = V_DOCNUM.
V_STATUS-status = V_EDIT_STATUS.
V_STATUS-STACOD = V_SAPCODE.
clear EDIDS.
select single * from EDIDS where docnum = v_docnum.
if sy-subrc = 0.
MOVE EDIDS-STACOD to V_STATUS-STACOD.
endif .
APPEND V_STATUS.
PERFORM CHANGE_IDOC_STATUS tables V_STATUS USING V_DOCNUM.
endloop.
*& Form OPEN_IDOC_FOR_CHANGE
text
--> p1 text
<-- p2 text
FORM OPEN_IDOC_FOR_CHANGE.
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
EXPORTING
DOCUMENT_NUMBER = V_DOCNUM
ALREADY_OPEN = 'N'
IMPORTING
IDOC_CONTROL = WA_EDIDC
TABLES
IDOC_DATA = DEDIDD
EXCEPTIONS
DOCUMENT_FOREIGN_LOCK = 1
DOCUMENT_NOT_EXIST = 2
DOCUMENT_NOT_OPEN = 3
STATUS_IS_UNABLE_FOR_CHANGING = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " OPEN_IDOC_FOR_CHANGE
*& Form CHANGE_IDOC
text
--> p1 text
<-- p2 text
FORM CHANGE_IDOC.
CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
TABLES
IDOC_CHANGED_DATA_RANGE = DEDIDD
EXCEPTIONS
IDOC_NOT_OPEN = 1
DATA_RECORD_NOT_EXIST = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CHANGE_IDOC
*& Form CLOSE_IDOC_FOR_CHANGE
text
--> p1 text
<-- p2 text
FORM CLOSE_IDOC_FOR_CHANGE.
CLEAR t_EDI_DS40.
t_edi_ds40-docnum = v_docnum.
t_edi_ds40-status = '69'.
t_edi_ds40-repid = sy-repid.
t_edi_ds40-tabnam = 'EDI_DS'.
t_edi_ds40-mandt = sy-mandt.
t_edi_ds40-stamqu = 'SAP'.
t_edi_ds40-stamid = 'B1'.
t_edi_ds40-stamno = '999'.
t_edi_ds40-stapa1 = 'Changes made to idoc ...'.
t_edi_ds40-stapa2 = t_new_kunnr.
t_edi_ds40-logdat = sy-datum.
t_edi_ds40-logtim = sy-uzeit.
APPEND t_edi_ds40.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
EXPORTING
DOCUMENT_NUMBER = V_DOCNUM
DO_COMMIT = 'X'
DO_UPDATE = 'X'
WRITE_ALL_STATUS = 'X'
TABLES
STATUS_RECORDS = t_EDI_DS40
EXCEPTIONS
IDOC_NOT_OPEN = 1
DB_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CLOSE_IDOC_FOR_CHANGE
*& Form CHANGE_IDOC_STATUS
text
--> p1 text
<-- p2 text
FORM CHANGE_IDOC_STATUS tables P_IDOC_STATUS structure V_IDOC_STATUS
USING P_DOCNUM.
CALL FUNCTION 'IDOC_STATUS_WRITE_TO_DATABASE'
EXPORTING
IDOC_NUMBER = p_docnum
IDOC_OPENED_FLAG = ' '
NO_DEQUEUE_FLAG = 'X'
IMPORTING
IDOC_CONTROL =
TABLES
IDOC_STATUS = P_IDOC_STATUS
EXCEPTIONS
IDOC_FOREIGN_LOCK = 1
IDOC_NOT_FOUND = 2
IDOC_STATUS_RECORDS_EMPTY = 3
IDOC_STATUS_INVALID = 4
DB_ERROR = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
else.
commit work.
ENDIF.
ENDFORM. " CHANGE_IDOC_STATUS
*& Form OPEN_FOR_PROCESS
text
--> p1 text
<-- p2 text
FORM OPEN_FOR_PROCESS.
CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_PROCESS'
EXPORTING
DB_READ_OPTION = DB_READ
DOCUMENT_NUMBER = V_DOCNUM
ENQUEUE_OPTION = SYNCHRONOUS
IMPORTING
IDOC_CONTROL = WA_EDIDC
EXCEPTIONS
DOCUMENT_FOREIGN_LOCK = 1
DOCUMENT_NOT_EXIST = 2
DOCUMENT_NUMBER_INVALID = 3
DOCUMENT_IS_ALREADY_OPEN = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " OPEN_FOR_PROCESS
*& Form SET_IDOC_STATUS
text
--> p1 text
<-- p2 text
FORM SET_IDOC_STATUS USING P_DOCNUM P_STA.
CALL FUNCTION 'EDI_DOCUMENT_STATUS_SET'
EXPORTING
DOCUMENT_NUMBER = P_DOCNUM
IDOC_STATUS = P_STA
IMPORTING
IDOC_CONTROL = WA_EDIDC
EXCEPTIONS
DOCUMENT_NUMBER_INVALID = 1
OTHER_FIELDS_INVALID = 2
STATUS_INVALID = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SET_IDOC_STATUS
*& Form CLOSE_IDOC_FOR_PROCESS
text
--> p1 text
<-- p2 text
FORM CLOSE_IDOC_FOR_PROCESS.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_PROCESS'
EXPORTING
DOCUMENT_NUMBER = V_DOCNUM
BACKGROUND = NO_BACKGROUND
NO_DEQUEUE = ' '
IMPORTING
IDOC_CONTROL = WA_EDIDC
EXCEPTIONS
DOCUMENT_NOT_OPEN = 1
FAILURE_IN_DB_WRITE = 2
PARAMETER_ERROR = 3
STATUS_SET_MISSING = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " CLOSE_IDOC_FOR_PROCESS -
BPC 7.5 Formula Dimension Processing Error
Hello
We have upgraded from 70-7.5 and when I do a Process of one of our dimensions i get the following error:-
- [DATASOURCE].[#Y_YROVERYR] Parser: The following syntax error occurred during parsing: Invalid token, Line 1, Offset 92, [TOTWITHA.
This is the formula in the dimension file :-
'iif(([YTD], [TotWithAlloc], ParallelPeriod(Year)) <> 0, (([YTD], [TotWithAlloc]) / ([YTD], [TotWithAlloc], ParallelPeriod(Year))) - 1, Null)
Any help please?
Rgds
PervenHi,
Is TOTWITHALLOC a member of the datasource dimension? Can you please quantify it completele by
[DATASRC].[TOTWITHALLOC]
Let me know if it works or not. -
How to get duplicate interchange ICN No when error 26: Duplicate interchange detected
Hi
I have been getting error 26: Duplicate interchange detected while i have EDFACT Interchange processing property check
for duplicate UNB5 (Interchange control number)= 30 days.
Now I need to get information for interchange no with whom it has been detected duplicate. Please
assist me to get this information
Kapil KaushishHi Kapil,
Alongwith this error you also get another error, check the event log which has details like interchange Id, Sender Id and receiver Id.
Also on error, Interchange/Transaction sets are suspended based on configuration done on Local Host Settings-->Inbound Batch Processing Option. So you can check the suspended message for the details as well.
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping -
Processing error when doing a drillthrough agianst a Rolap dimension, working with MOLAP
Hi,
I'm having a drillthrough dimension (fact) that i'm using for drillthrough scripts. One thing that I have come a cross is that I get processing errors when I run queries agianst a ROLAP dimension where as it works agianst the same dimension set
as MOLAP. This is kind of confusing me.
The error message i get is like this one:
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined
limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while the 'Journal NO' attribute of the 'GLFact' dimension from the 'XXX' database was being processed.
I found a article about this
http://sqlblog.com/blogs/marco_russo/archive/2009/01/17/issues-executing-a-drillthrough-with-a-rolap-dimension.aspx
But I have set KeyDuplicate, Keynotfound, Nullkeyconvertedtounknown and NullKeynotallowed to ignoreerror and still it doesn't work.
So my questions are 2:
1. Do anyone have a solution for me? Or having any thoughts about this?
2. When switching over to MOLAP the processingtime takes about 30 min. How can i decrease this to a minimum?
This is all implemented in SSAS 2005.I'm getting the exact same error when attempting to drill down on a rolap dimension associated to the cube. the cube is molap, but the dimension is rolap to reduce processing time (processing dimension using molap spike my 4 core processing to 100%
for 4 minutes due to all the select DISTINCT on the attributes (about 10)).
I too have seen the article about KeyDuplicate but I think this is a different issue. Anyone figure out the problem?
Version: SSAS 2012 SP2
Example of error:
Server: The current operation was cancelled because another operation in the transaction failed. Errors in the OLAP storage engine: An error occurred while the 'City' attribute of the 'NameAddress'
dimension from the 'MyDatabase' database was being processed. Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation. -
Revision: 21394
Revision: 21394
Author: [email protected]
Date: 2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.javaFor our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
Revision: 21141
Revision: 21141
Author: [email protected]
Date: 2011-04-26 06:40:39 -0700 (Tue, 26 Apr 2011)
Log Message:
Bug: 2780176 - Logging and logging out multiple times in LCDS can cause duplicate session detected errors.
QA: Yes
Doc: No
Checkintests: Pass
Details: When a logout was followed by an immediate login, sometimes the server would throw duplicate session detected errors. This was because when logout happened, a fire-and-forget disconnect message was sent to the server that established a new session, and if the subsequent login happened before disconnect ACK returned from the server, that would establish another session and hence the error. The fix is to insert a slight delay between disconnect and ResultEvent dispatching. This way, disconnect has a chance to return before a login is performed.
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asYou've got an incompatible Logitech driver and java was incompletely uninstalled.
You may have a problem with the Wacom driver.
I don't know if fixing those things will help.
There also a few window server errors, but I don't know if they are causal.
If you can note the time of the hangs, that might help narrow it down in the logs. -
[SOLVED] mkarchiso: ERROR: failed to detect root filesystem
hi guys!
i am now trying to build my own live archlinux distribution with archiso and with the command "mkarchiso"
at the first step in installing the base when it installs linux and execute "mkinitcpio" it shows me this error:
( 73/111) installing linux [#####################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
i continue the process with that error and in the "run" step i did this command
# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[root@fuhrer livecd]# mkarchiso -w work/x86_64/ -r mkinitcpio -p linux run
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work/x86_64/
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio
==> Starting dry run: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
and the big problem shows when i build the iso file and "dd" it to USB disk, when i choose to boot the live archlinux it tell me
ERROR: failed to detect root filesystem
and that you cannot log to tty
any suggestions?
Last edited by fuhrer (2013-07-22 17:05:07)First run it, without any modification to learn how it works. Check if works. Modify as you need. Check if works...
Do not worry about the mkinitcpio error, because such initramfs images should not be used for boot live medium. You can see that profiles uses own mkinitcpio.conf with at least archiso hook
Running mkarchiso directly is not the right way, at least if you do not know how things works.
[root@exequiel tmp]# cp -r /usr/share/archiso/configs/baseline .
[root@exequiel tmp]# cd baseline
[root@exequiel baseline]# ./build.sh
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: init
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: /etc/pacman.conf
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core 103.0 KiB 12.6M/s 00:00 [############################################################################] 100%
extra 1439.7 KiB 11.2M/s 00:00 [############################################################################] 100%
community 1990.1 KiB 11.2M/s 00:00 [############################################################################] 100%
multilib 107.3 KiB 11.6M/s 00:00 [############################################################################] 100%
:: There are 51 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs 15) gettext 16) glibc
17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2 29) man-db 30) man-pages 31) mdadm 32) nano
33) netctl 34) pacman 35) pciutils 36) pcmciautils 37) perl 38) procps-ng 39) psmisc 40) reiserfsprogs 41) sed 42) shadow 43) sysfsutils 44) systemd-sysvcompat 45) tar 46) texinfo 47) usbutils
48) util-linux 49) vi 50) which 51) xfsprogs
Enter a selection (default=all):
resolving dependencies...
looking for inter-conflicts...
Packages (111):
Name New Version Net Change
core/acl 2.2.52-1 0.39 MiB
core/archlinux-keyring 20130525-2 0.49 MiB
core/attr 2.4.47-1 0.19 MiB
core/ca-certificates 20130610-1 0.25 MiB
core/cracklib 2.8.22-3 1.20 MiB
core/curl 7.31.0-1 1.73 MiB
core/db 5.3.21-1 15.30 MiB
core/dbus 1.6.12-1 1.63 MiB
core/dirmngr 1.1.1-1 0.49 MiB
core/expat 2.1.0-2 0.61 MiB
core/gdbm 1.10-1 0.37 MiB
core/glib2 2.36.3-2 11.66 MiB
core/gmp 5.1.2-1 2.07 MiB
core/gnupg 2.0.20-2 7.14 MiB
core/gpgme 1.4.2-1 0.68 MiB
core/groff 1.22.2-3 8.94 MiB
core/hwids 20130607-1 1.28 MiB
core/iana-etc 2.30-3 3.44 MiB
core/iptables 1.4.19.1-1 1.38 MiB
core/kbd 1.15.5-4 2.83 MiB
core/keyutils 1.5.5-5 0.18 MiB
core/kmod 14-1 0.45 MiB
core/krb5 1.11.3-1 3.86 MiB
core/libarchive 3.1.2-1 3.19 MiB
core/libassuan 2.1.1-1 0.17 MiB
core/libcap 2.22-5 0.13 MiB
core/libffi 3.0.13-3 0.10 MiB
core/libgcrypt 1.5.2-1 0.68 MiB
core/libgpg-error 1.12-1 0.33 MiB
core/libgssglue 0.4-1 0.19 MiB
core/libksba 1.3.0-1 0.30 MiB
core/libldap 2.4.35-4 2.15 MiB
core/libpipeline 1.2.4-1 0.08 MiB
core/libsasl 2.1.26-4 0.54 MiB
core/libssh2 1.4.3-1 1.19 MiB
core/libtirpc 0.2.3-1 0.68 MiB
core/libusbx 1.0.15-1 0.15 MiB
core/linux-api-headers 3.8.4-1 4.58 MiB
core/linux-firmware 20130610-1 51.25 MiB
core/lzo2 2.06-1 0.61 MiB
core/mkinitcpio 0.14.0-1 0.16 MiB
core/mkinitcpio-busybox 1.20.2-1 0.34 MiB
core/mpfr 3.1.2-1 1.50 MiB
core/ncurses 5.9-5 9.75 MiB
core/openresolv 3.5.5-1 0.04 MiB
core/openssl 1.0.1.e-3 11.38 MiB
core/pacman-mirrorlist 20130626-1 0.02 MiB
core/pam 1.1.6-4 3.41 MiB
core/pambase 20130113-1 0.04 MiB
core/pcre 8.33-1 4.83 MiB
core/pinentry 0.8.3-1 0.33 MiB
core/popt 1.16-6 0.43 MiB
core/pth 2.0.7-4 0.21 MiB
core/readline 6.2.004-1 1.20 MiB
core/run-parts 4.3.4-1 0.11 MiB
core/systemd 204-3 14.59 MiB
core/sysvinit-tools 2.88-11 0.07 MiB
core/tzdata 2013d-1 1.84 MiB
core/xz 5.0.5-1 0.90 MiB
core/zlib 1.2.8-1 0.30 MiB
core/bash 4.2.045-4 3.51 MiB
core/bzip2 1.0.6-4 0.25 MiB
core/coreutils 8.21-2 13.27 MiB
core/cronie 1.4.9-5 0.15 MiB
core/cryptsetup 1.6.1-2 0.71 MiB
core/device-mapper 2.02.98-4 0.52 MiB
core/dhcpcd 5.6.8-3 0.16 MiB
core/diffutils 3.3-1 0.43 MiB
core/e2fsprogs 1.42.8-1 3.16 MiB
core/file 5.14-1 2.71 MiB
core/filesystem 2013.05-2 0.01 MiB
core/findutils 4.4.2-5 1.70 MiB
core/gawk 4.1.0-1 2.11 MiB
core/gcc-libs 4.8.1-1 3.41 MiB
core/gettext 0.18.3-1 11.10 MiB
core/glibc 2.17-6 35.24 MiB
core/grep 2.14-2 1.33 MiB
core/gzip 1.6-1 0.18 MiB
core/heirloom-mailx 12.5-3 0.46 MiB
core/inetutils 1.9.1-6 0.97 MiB
core/iproute2 3.9.0-2 1.37 MiB
core/iputils 20121221-2 0.21 MiB
core/jfsutils 1.1.15-4 0.98 MiB
core/less 458-1 0.22 MiB
core/licenses 20130203-1 0.53 MiB
core/linux 3.9.9-1 63.98 MiB
core/logrotate 3.8.5-1 0.07 MiB
core/lvm2 2.02.98-4 3.10 MiB
core/man-db 2.6.5-1 1.26 MiB
core/man-pages 3.52-1 4.63 MiB
core/mdadm 3.2.6-4 1.18 MiB
core/nano 2.2.6-2 1.49 MiB
core/netctl 1.1-1 0.16 MiB
core/pacman 4.1.2-1 4.04 MiB
core/pciutils 3.2.0-3 0.34 MiB
core/pcmciautils 018-7 0.05 MiB
core/perl 5.18.0-1 47.64 MiB
core/procps-ng 3.3.8-2 0.59 MiB
core/psmisc 22.20-1 0.73 MiB
core/reiserfsprogs 3.6.23-1 0.95 MiB
core/sed 4.2.2-3 0.76 MiB
core/shadow 4.1.5.1-6 3.88 MiB
core/sysfsutils 2.1.0-8 0.17 MiB
core/systemd-sysvcompat 204-3 0.03 MiB
core/tar 1.26-4 2.33 MiB
core/texinfo 5.1-1 8.62 MiB
core/usbutils 007-1 0.17 MiB
core/util-linux 2.23.1-2 8.92 MiB
core/vi 1:050325-3 0.33 MiB
core/which 2.20-6 0.06 MiB
core/xfsprogs 3.1.11-1 3.29 MiB
Total Installed Size: 427.79 MiB
:: Proceed with installation? [Y/n]
(111/111) checking keys in keyring [############################################################################] 100%
(111/111) checking package integrity [############################################################################] 100%
(111/111) loading package files [############################################################################] 100%
(111/111) checking for file conflicts [############################################################################] 100%
(111/111) checking available disk space [############################################################################] 100%
( 1/111) installing linux-api-headers [############################################################################] 100%
( 2/111) installing tzdata [############################################################################] 100%
( 3/111) installing iana-etc [############################################################################] 100%
( 4/111) installing filesystem [############################################################################] 100%
warning: directory permissions differ on /tmp/baseline/work/root-image/run/
filesystem: 1777 package: 755
( 5/111) installing glibc [############################################################################] 100%
( 6/111) installing ncurses [############################################################################] 100%
( 7/111) installing readline [############################################################################] 100%
( 8/111) installing bash [############################################################################] 100%
( 9/111) installing bzip2 [############################################################################] 100%
( 10/111) installing gcc-libs [############################################################################] 100%
( 11/111) installing db [############################################################################] 100%
( 12/111) installing zlib [############################################################################] 100%
( 13/111) installing cracklib [############################################################################] 100%
( 14/111) installing libgssglue [############################################################################] 100%
( 15/111) installing libtirpc [############################################################################] 100%
( 16/111) installing pambase [############################################################################] 100%
( 17/111) installing pam [############################################################################] 100%
( 18/111) installing attr [############################################################################] 100%
( 19/111) installing acl [############################################################################] 100%
( 20/111) installing gmp [############################################################################] 100%
( 21/111) installing libcap [############################################################################] 100%
( 22/111) installing coreutils [############################################################################] 100%
( 23/111) installing run-parts [############################################################################] 100%
( 24/111) installing cronie [############################################################################] 100%
Optional dependencies for cronie
pm-utils: defer anacron on battery power
smtp-server: send job output via email
smtp-forwarder: forward job output to email server
( 25/111) installing expat [############################################################################] 100%
( 26/111) installing dbus [############################################################################] 100%
Optional dependencies for dbus
libx11: dbus-launch support
( 27/111) installing pcre [############################################################################] 100%
( 28/111) installing libffi [############################################################################] 100%
( 29/111) installing glib2 [############################################################################] 100%
Optional dependencies for glib2
python2: for gdbus-codegen and gtester-report
elfutils: gresource inspection tool
( 30/111) installing kbd [############################################################################] 100%
( 31/111) installing kmod [############################################################################] 100%
( 32/111) installing hwids [############################################################################] 100%
( 33/111) installing libgpg-error [############################################################################] 100%
( 34/111) installing libgcrypt [############################################################################] 100%
( 35/111) installing shadow [############################################################################] 100%
( 36/111) installing util-linux [############################################################################] 100%
( 37/111) installing xz [############################################################################] 100%
( 38/111) installing systemd [############################################################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
cryptsetup: required for encrypted block devices [pending]
libmicrohttpd: systemd-journal-gatewayd
quota-tools: kernel-level quota management
python: systemd library bindings
systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
( 39/111) installing device-mapper [############################################################################] 100%
( 40/111) installing popt [############################################################################] 100%
( 41/111) installing cryptsetup [############################################################################] 100%
( 42/111) installing dhcpcd [############################################################################] 100%
( 43/111) installing diffutils [############################################################################] 100%
( 44/111) installing e2fsprogs [############################################################################] 100%
( 45/111) installing file [############################################################################] 100%
( 46/111) installing findutils [############################################################################] 100%
( 47/111) installing mpfr [############################################################################] 100%
( 48/111) installing gawk [############################################################################] 100%
( 49/111) installing gettext [############################################################################] 100%
Optional dependencies for gettext
cvs: for autopoint tool
( 50/111) installing grep [############################################################################] 100%
( 51/111) installing less [############################################################################] 100%
( 52/111) installing gzip [############################################################################] 100%
( 53/111) installing gdbm [############################################################################] 100%
( 54/111) installing perl [############################################################################] 100%
( 55/111) installing openssl [############################################################################] 100%
Optional dependencies for openssl
ca-certificates [pending]
( 56/111) installing libsasl [############################################################################] 100%
( 57/111) installing libldap [############################################################################] 100%
( 58/111) installing keyutils [############################################################################] 100%
( 59/111) installing krb5 [############################################################################] 100%
( 60/111) installing heirloom-mailx [############################################################################] 100%
Optional dependencies for heirloom-mailx
smtp-forwarder: for sending mail
( 61/111) installing inetutils [############################################################################] 100%
( 62/111) installing iptables [############################################################################] 100%
( 63/111) installing iproute2 [############################################################################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 64/111) installing sysfsutils [############################################################################] 100%
( 65/111) installing iputils [############################################################################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 66/111) installing jfsutils [############################################################################] 100%
( 67/111) installing licenses [############################################################################] 100%
( 68/111) installing linux-firmware [############################################################################] 100%
( 69/111) installing mkinitcpio-busybox [############################################################################] 100%
( 70/111) installing lzo2 [############################################################################] 100%
( 71/111) installing libarchive [############################################################################] 100%
( 72/111) installing mkinitcpio [############################################################################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image [pending]
bzip2: Use bzip2 compression for the initramfs image [pending]
lzop: Use lzo compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 73/111) installing linux [############################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 74/111) installing logrotate [############################################################################] 100%
Optional dependencies for logrotate
cron: scheduled log rotation
( 75/111) installing lvm2 [############################################################################] 100%
( 76/111) installing groff [############################################################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
libxaw: for gxditview
( 77/111) installing libpipeline [############################################################################] 100%
( 78/111) installing man-db [############################################################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
gzip [pending]
( 79/111) installing man-pages [############################################################################] 100%
( 80/111) installing mdadm [############################################################################] 100%
( 81/111) installing nano [############################################################################] 100%
( 82/111) installing openresolv [############################################################################] 100%
( 83/111) installing netctl [############################################################################] 100%
Optional dependencies for netctl
dialog: for the menu based wifi assistant
dhclient: for DHCP support (or dhcpcd)
dhcpcd: for DHCP support (or dhclient) [pending]
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through netctl-ifplugd
wpa_actiond: for automatic wireless connections through netctl-auto
ifenslave: for bond connections
bridge-utils: for bridge connections
ppp: for pppoe connections
( 84/111) installing sed [############################################################################] 100%
( 85/111) installing ca-certificates [############################################################################] 100%
( 86/111) installing libssh2 [############################################################################] 100%
( 87/111) installing curl [############################################################################] 100%
( 88/111) installing pth [############################################################################] 100%
( 89/111) installing libksba [############################################################################] 100%
( 90/111) installing libassuan [############################################################################] 100%
( 91/111) installing pinentry [############################################################################] 100%
Optional dependencies for pinentry
gtk2: for gtk2 backend
qt4: for qt4 backend
( 92/111) installing dirmngr [############################################################################] 100%
( 93/111) installing gnupg [############################################################################] 100%
Optional dependencies for gnupg
curl: gpg2keys_curl [pending]
libldap: gpg2keys_ldap [pending]
libusb-compat: scdaemon
( 94/111) installing gpgme [############################################################################] 100%
( 95/111) installing pacman-mirrorlist [############################################################################] 100%
( 96/111) installing archlinux-keyring [############################################################################] 100%
( 97/111) installing pacman [############################################################################] 100%
>>> Run `pacman-key --init; pacman-key --populate archlinux`
>>> to import the data required by pacman for package verification.
>>> See: https://www.archlinux.org/news/having-pacman-verify-packages
Optional dependencies for pacman
fakeroot: for makepkg usage as normal user
( 98/111) installing pciutils [############################################################################] 100%
( 99/111) installing pcmciautils [############################################################################] 100%
(100/111) installing procps-ng [############################################################################] 100%
(101/111) installing psmisc [############################################################################] 100%
(102/111) installing reiserfsprogs [############################################################################] 100%
(103/111) installing sysvinit-tools [############################################################################] 100%
(104/111) installing systemd-sysvcompat [############################################################################] 100%
(105/111) installing tar [############################################################################] 100%
(106/111) installing texinfo [############################################################################] 100%
(107/111) installing libusbx [############################################################################] 100%
(108/111) installing usbutils [############################################################################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage [pending]
(109/111) installing vi [############################################################################] 100%
Optional dependencies for vi
heirloom-mailx: used by the preserve command for notification [pending]
(110/111) installing which [############################################################################] 100%
(111/111) installing xfsprogs [############################################################################] 100%
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Installing packages to 'work/root-image/'...
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
resolving dependencies...
looking for inter-conflicts...
Packages (1):
Name New Version Net Change
core/syslinux 4.06-2 3.35 MiB
Total Installed Size: 3.35 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [############################################################################] 100%
(1/1) checking package integrity [############################################################################] 100%
(1/1) loading package files [############################################################################] 100%
(1/1) checking for file conflicts [############################################################################] 100%
(1/1) checking available disk space [############################################################################] 100%
(1/1) installing syslinux [############################################################################] 100%
==> If you want to use syslinux as your bootloader
==> edit /boot/syslinux/syslinux.cfg and run
==> # /usr/bin/syslinux-install_update -i -a -m
==> to install it.
Optional dependencies for syslinux
perl-passwd-md5: For md5pass
perl-digest-sha1: For sha1pass
mtools: For mkdiskimage and syslinux support
gptfdisk: For GPT support
util-linux: For isohybrid [installed]
[mkarchiso] INFO: Packages installed successfully!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: run
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Run command: mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img
==> Starting build: 3.9.9-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [archiso]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/archiso.img
==> Image generation successful
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: prepare
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Cleaning up what we can on root-image...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/x86_64/root-image.fs.sfs' does not exist, making it from 'work/root-image'
[mkarchiso] INFO: Creating ext4 image of 1025 MiB...
mke2fs 1.42.8 (20-Jun-2013)
Discarding device blocks: done
warning: 256 blocks unused.
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65664 inodes, 262144 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8208 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Mounting 'work/root-image.fs' on 'work/mnt/root-image'
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 2 MiB (1%) | Avail: 1007 MiB (99%)
[mkarchiso] INFO: Copying 'work/root-image/' to 'work/mnt/root-image/'...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Total: 1008 MiB (100%) | Used: 552 MiB (55%) | Avail: 457 MiB (45%)
[mkarchiso] INFO: Unmounting 'work/mnt/root-image'
[mkarchiso] INFO: Creating SquashFS image for 'work/root-image.fs', This may take some time...
Parallel mksquashfs: Using 2 processors
Creating 4.0 filesystem on work/root-image.fs.sfs, block size 131072.
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 193188.71 Kbytes (188.66 Mbytes)
18.41% of uncompressed filesystem size (1049632.29 Kbytes)
Inode table size 10918 bytes (10.66 Kbytes)
33.19% of uncompressed inode table size (32898 bytes)
Directory table size 31 bytes (0.03 Kbytes)
88.57% of uncompressed directory table size (35 bytes)
Number of duplicate files found 0
Number of inodes 2
Number of files 1
Number of fragments 0
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 1
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
[mkarchiso] INFO: Image creation done in 01:46 minutes
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: checksum
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Target 'work/iso/arch/checksum.i686.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (i686)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Target 'work/iso/arch/checksum.x86_64.md5' does not exist, making it from 'work/iso/arch'
[mkarchiso] INFO: Creating checksum file for self-test (x86_64)...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: iso
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Image name: archlinux-2013.07.21-x86_64.iso
[mkarchiso] INFO: Disk label: ARCH_201307
[mkarchiso] INFO: Disk publisher: Arch Linux <http://www.archlinux.org>
[mkarchiso] INFO: Disk application: Arch Linux Live/Rescue CD
[mkarchiso] INFO: Target 'out/archlinux-2013.07.21-x86_64.iso' does not exist, making it from 'work/iso'
[mkarchiso] INFO: Creating ISO image...
xorriso 1.3.0 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev 'stdio:out/archlinux-2013.07.21-x86_64.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data, 4155m free
Added to ISO image: directory '/'='/tmp/baseline/work/iso'
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : UPDATE : 16 files added in 1 seconds
xorriso : NOTE : Copying to System Area: 432 bytes from file '/tmp/baseline/work/iso/isolinux/isohdpfx.bin'
libisofs: NOTE : Aligned image size to cylinder size by 177 blocks
xorriso : UPDATE : 16.90% done
xorriso : UPDATE : 82.85% done
ISO image produced: 105472 sectors
Written to medium : 105472 sectors at LBA 0
Writing to 'stdio:out/archlinux-2013.07.21-x86_64.iso' completed successfully.
[mkarchiso] INFO: Done! | 206M out/archlinux-2013.07.21-x86_64.iso
Booting:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [archiso]
:: Mounting '/dev/disk/by-label/ARCH_201307' to '/run/archiso/bootmnt'
:: Device '/dev/disk/by-label/ARCH_201307' mounted successfully.
:: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=75%...
:: Mounting '/dev/loop0' to '/run/archiso/sfs/root-image'
:: Device '/dev/loop0' mounted successfully.
:: Creating '/run/archiso/cowspace/persistent_ARCH_201307/x86_64/root-image.cow' as non-persistent.
:: Mounting '/dev/mapper/arch_root-image' to '/new_root/'
:: Device '/dev/mapper/arch_root-image' mounted successfully.
:: running cleanup hook [udev]
Welcome to Arch Linux!
Expecting device dev-ttyS0.device...
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Starting Setup Virtual Console...
Starting Create static device nodes in /dev...
Mounting Huge Pages File System...
Starting Apply Kernel Variables...
Mounting Debug File System...
Mounting Configuration File System...
Starting udev Coldplug all Devices...
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Reached target Swap.
Mounting Temporary Directory...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Create static device nodes in /dev.
[ OK ] Mounted Configuration File System.
[ OK ] Mounted Temporary Directory.
Starting udev Kernel Device Manager...
Starting Load Random Seed...
[ OK ] Started Load Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Recreate Volatile Files and Directories.
Starting Update UTMP about System Reboot/Shutdown...
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Reboot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Login Service...
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Started Login Service.
[ OK ] Found device /dev/ttyS0.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Arch Linux 3.9.9-1-ARCH (ttyS0)
localhost login: -
TIME dimension processing fails saying "..attribute key cannot be found.." in EPM 10
After upgrading from version 7.5 to EPM 10, when we ran a ‘Full Process’ on the TIME dimension, it ran into an error saying “Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactCapEx', Column: 'TIMEID', Value: '20090013'. The attribute is 'Time_TIMEID'. (1/13/2015 2:41:02 PM)”.
Full error message is attached herewith – ‘Time Dimension Error.txt’
After researching, we did discover that MONTHNUM needed to be converted to BASE_PERIOD. Re-processed which produced the same error.
Prior to migration to version 7.5, we ran a full process on TIME dimension there. It completed successfully, confirming the issue is only with version 10.
Confirmed we could see the TIMEID value of 20090013 in the following places:
Time Dimension in the appropriate TIMEID attribute column.
Confirmed mbrTIME table had base member ID with TIMEID attribute filled out correctly.
Data in tblFactFINANCE could be pulled using that TIMEID
We truncated all the records in all the fact tables associated to this TIME dimension.
Eventually, when none of the tables had any records, the TIME dimension then processed successfully.
We this began to suspect the issue may not really be related to bad records.
We conducted one more test to confirm this.
Using an input form in EPM 10, we manually entered data in one of the models (at this point none of the fact tables have any records)
Ran Full Optimize on that model with Compress Database and Index Defragmentation checked – This step failed with the error attached in ‘MatrixRateFullOptimize.txt’
Ran Full process on Time Dimension – Failed indicating issue with TimeID 2012001 (that’s my manual entry). Attached error report ‘TimeDim Error MatrixRate.txt’
At this point, the table only contains the manually entered records (no suspected bad records)
We then suspected there could have been an issue with the upgrade process.
So we reprocessed all the dimension and optimized all the models in version 7.5, made a new backup and restored it to version 10.
The issue still persisted!
At this point, we have tried all the possibilities we could think of. Each time the fact table is populated with records, the TIME dimension process fails indicating ‘the attribute key’ cannot be found.
There is probably something in the OLAP partition that is not able to link the dimension attributes to the cubes.
Additional Information:
Please find attached the existing Time Dimension – TimeDimensionMembers.xlxs
Version of Excel used: Excel 2007, SP3 MSO (12.0.6683.5000)
System Specs: Please see screenshot below.Thank you all for responding! This issue is resolved.
Here’s what the issue was:
The time structure is TOTAL >> Years >> Quarters >> Months (e.g. T.ALL >> 2012.TOTAL >> 2012.Q1 >> 2012.P01)
As shown in the screenshot below, the LEVEL for ‘T.ALL’ member was set to YEAR, which is incorrect (we can’t have Year rolling up to a Year)
We changed the LEVEL to ‘TOTAL’ and this fixed the issue!!
If only it gave a better error message than the “..attribute key not found” message -
Hi
I receive an error when processing a dimension:
The error:
- Exception error has occurred; check the log ID = 91 for more details
Where can I find the mentioned log?Hi Jesper,
Have you solved this issue?
I had the same error message few days ago, and i solved it by installing data connectivity driver for office 2007 to my appserver.
If you have not solved it yet, you might wanna try to install the driver to your appserver (all appserver if you're in multiserver environment).
Hope helps,
Thanks,
Liam -
Facebook installation gives an error ''duplicate provider authority''
Hi everybody this is my first ever post I hope i will get an answer quickley from this forum,
My question is I have this LENOVO S860 smartphone with 4.4 android, It came as preinstalled Facebook which has an older version of facebook which I don't like much when i go to playstore and try to download Facebook it downloads smoothly but when the installation process comes up it gives an error ''duplicate provider authority'' I can't even uninstall the default Facebook and neither can update it as there is no update button in Play Store, Please help me out
thanks1.Have you try go to Settings-System Settings -Apps select the Facebook app to uninstalled it . It could be uninstalled by user.
2.what's the default Facebook version in your phone? is it 3.7?
You can get it from Settings-System Settings -Apps select the Facebook app. Could you take a screenshot about the Facebook app info to give me
3.what's your Build number version ,You can go to Settings-System Settings-About phone--Version information -Build number. Could you take a screenshot about the Version infomation to give me. -
An unexpected error has been detected by HotSpot Virtual Machine: SIGBUS
We had a java server process shutdown with the following output:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xffffffff7e533324, pid=1038, tid=15
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_12-b04 mixed mode)
# Problematic frame:
# V [libjvm.so+0x533324]
--------------- T H R E A D ---------------
Current thread (0x00000001001bc630): GCTaskThread [id=15]
Since then we've experienced a problem where the process has become unresponsive causing us to force a manual shutdown.
There was not an issue with available memory at the time the process became unresponsive. System.out stopped printing GC output at this time.
Hardware is a T5120.
Please let us know if there is a known issue or some way to resolve this.john.odendahl wrote:
Hey look, the VM crashed so i posted on a forum related to the VM.
If the hardware crashed I probably would have posted it on a forum related to the hardware.
If MS Word were to crash i probably would not start start blaming it on the hardware before I tried to find out if there is a problem with MS Word.
What I was hoping to find out was if there was some known issue with the particular version of the jdk or if there was some obvious cause....or possibly if there is something additional I could do to troubleshoot the problem. Specifically I said "Please let us know if there is a known issue or some way to resolve this."
Expanding on my previous replies.
There are any number of sources for the cause of the problem that the VM reported.
While it is possible that the VM itself caused it is also likely, probably quite a bit more so, that there is some other cause.
The causes of that can be hardware, OS, other applications and the software that the VM is running.
Resolution requires the following.
1. Identifying the cause
2. If and only if the cause is due to the VM then submitting a bug report.
3. Exclusive of a specific service/sales contract with Sun a bug fix is unlikely to be forthcoming in any reasonable amount of time.
So far all i've got out if this is that it's a hard problem to troubleshoot and there is a bunch more information necessary to determine the cause. Correct. If the VM created the dump file (whatever it is called) you can create a bug report and attach that. But 3 above still applies but sometimes Sun jumps right on something.
If that is the case then fine, i completely understand, but no one has said what additional information would be helpful. Your entire computer and a way to replicate it on that computer is the only way that any one besides you can determine that. And inclination and time.
I doubt that is acceptable to you nor is anyone likely to undertake that (exclusive of a specific commercial tie between you and Sun.)
The alternative is that you, or someone at your company, tracks the problem down. There are two many possible variations for how one might need to to that for a forum post and perhaps even for an entire book. But replicating it is the first step.
...unless you can provide some help or at least some useful information.You might want to google for SIGBUS and SIGSEGV error reports against the VM just to see how often this occurs. -
AS2 Receiver Error: MIC not verified # unexpected-processing-error
When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen -
RFC Connection error duplicate conversation id
Hello everybody !
I started getting a weird error on my XI RFC Connections, because of this I can't connect to my SLD.
When testing the RFC connection "AI_DIRECTORY_JCOSERVER", Ai_RUNTIME_JCOSERVER, LCRSAPRFC and SAPSLDAPI (trans sm59) I get the following error:
ERROR duplicate conversation id 34212218 from localhost/sapgw01 and calhost/ pgw00
COMPONENT CPIC (TCP/IP) with Unicode
COUNTER 87
MODULE r3cpic.c
LINE 5432
RETURN CODE 736
SUBRC 0
RELEASE 640
TIME Tue Dec 07 12:43:22 2004
VERSION 3
Does anybody have any idea/clues on this? thanx!
MartialHello !
I have the same problem you had ...
Do you solve your problem and how ?
Thanks in advance
Martial
Maybe you are looking for
-
Error While Using Crystal Report and Its Print SAP Business One
Hi Experts, I am using SAP Business One 8.82 PL 11. On my Server there is a problem in Crystal Report tool. When I am trying to see preview and tried to get print of any Crystal report layout It gives me error "Unknown Database Connector Error" Pleas
-
Since January, some data missing in EWA report (e.g. performance data), and I found some short dump in ST22 with CALL_FUNCTION_NOT_FOUND. I found in source systems and those data capture successfully. How can I let the SolMan read those information b
-
How to use __createdAt in a query
Hi In Objective C, I'm trying to query a table and get all entities with __createdAt later than someDate. I tried the following code: NSPredicate *predicate = [NSPredicate predicateWithFormat:@"__createdAt > %@", somdeDate]; MSQuery *query = [aTable
-
Hour glass showing instead of thumbnails when importing new photos
I just started using Photoshop 10. When I import photographs from my camera or from any other source, the thumbnails do not show in the catalog, I can only see an hourglass. If I click on the hourglass, the picture opens and the picture shows perfec
-
Adding hyperlink within the Job Posting description in Peoplesoft TAM
Hi All - Is it possible to put a hyperlink in the Job Posting description in TAM. The entire Job posting description is retrieved from the Job Posting Index file which gets created running the delivered process (Verity Job Posting Index Build: HRS_JS