AS2 Receiver Error: MIC not verified # unexpected-processing-error

When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?

Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen

Similar Messages

MIC not verified # authentication-failed

Hi,
We are getting this error while trying to send messages from XI through AS2:
MIC not verified # authentication-failed
Can anybody please let us know the reason for this error.
Thanks in advance.
Best Regards,
Shweta

Hi Shabarish & Prateek,
Thanks a lot for the information.
I've also checked this information in Seeburger document and I agree this can be an issue with the Certificate.
But these scenarios were working fine for a long time,the Certificates are valid till 2016.
And the most important thing is,we get this error in 1 message out of 100-200,other messages are sent successfully.
So,if this is an issue with certificate,how is it possible that it affects only 1-2 messages not all.
I had never seen this error before and suddenly we have started getting such errors for a number of scenarios for last 15 days.
I believe ,there can be a problem with Certificate for 1 customer but if it is more than one ,it is hard to believe that all of them have problems with Certificates and at the same time.
I tried to search for notes related to this problem.
Is it something related to MIME content,as mentioned in note 1287778?
Kindly let me know.
Thanks.
Regards,
Shweta

An unexpected processing error occurred. Please contact Microsoft

Before I get flamed like I did on StackOverflow, can I please make the point that there does NOT seem to be a clear route for getting official support for the Live SDK from Microsoft? I'm just trying to get someone from Microsoft to explain to me either
what I need to be doing to my code OR how best to reach out to someone at Microsoft regarding this particular issue.
Using this C# code:
LiveConnectClient liveClient = new LiveConnectClient(currentSession);
LiveOperationResult operationResult = await liveClient.GetAsync(file.FileLocation);
dynamic contentResults = operationResult.Result;
IDictionary<string, object> item = contentResults as IDictionary<string, object>;
the following exception occurred on the GetAsync call:
Microsoft.Live.LiveConnectException occurred
HResult=-2146233088
Message=An unexpected processing error occurred.
Please contact Microsoft.
Source=mscorlib
ErrorCode=server_internal_error
StackTrace:
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task
task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Relative_History.OneDriveViewModel.<GetPictureURL>d__86.MoveNext()
InnerException:
I've not encountered this exception before and the code works as-is on other files. Restarting the app and the code works as expected so I'm not sure what I'm supposed to do other than "contact Microsoft" as instructed and, as stated at the start
of this post, Microsoft don't say HOW to contact them.

Hi,
Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
I also suggest you update the firmware of your router.
Please alos share more information in event viewer with us as mentioned by ZigZag31343x
Meanwhile you can contact the support of My Book Live
http://wdc.com/en/products/products.aspx?id=280
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Receiving an account not verified message on ipad 2, iphone 4, and pc

I am receiving an "account not verified" message when I go to icloud on my ipad 2, iphone 4, and pc (all have ios5). It requests I check my email but I never receive one. My Appleid and password are correct because I can go to my itunes account and buy apps, music, books, etc. How do Iv verify my account?

This same problem is happening to me. I bought the Lion update, updated IOS 5 etc and no verification email ever arrives. I changed my apple id password, which had to be done by sending a verification email and that email arrived immediately. Its starting to become really frustrating and really disappointing from mac
The verification email for icloud never arrives???? Someone help?????

Impdp error ORA-39125: Worker unexpected fatal error in KUPW$WORKER.PUT_DDL

Hi,
I am trying to generate sql script form the dmp file.
but getting this error.
C:\Documents and Settings\satish.HTSS>impdp egift/egift@local directory=DIR1 dum
pfile=exp.dmp sqlfile=create.sql
Import: Release 10.2.0.1.0 - Production on Saturday, 24 May, 2008 0:16:07
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Master table "EGIFT"."SYS_SQL_FILE_FULL_01" successfully loaded/unloaded
Starting "EGIFT"."SYS_SQL_FILE_FULL_01": egift/********@local directory=DIR1 du
mpfile=exp.dmp sqlfile=create.sql
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_
PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS while calling D
BMS_METADATA.CONVERT []
ORA-06502: PL/SQL: numeric or value error
LPX-00007: unexpected end-of-file encountered
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6235
----- PL/SQL Call Stack -----
object      line object
handle    number name
20B135F8     14916 package body SYS.KUPW$WORKER
20B135F8      6300 package body SYS.KUPW$WORKER
20B135F8     12279 package body SYS.KUPW$WORKER
20B135F8      3279 package body SYS.KUPW$WORKER
20B135F8      3956 package body SYS.KUPW$WORKER
20B135F8      6931 package body SYS.KUPW$WORKER
20B135F8      1262 package body SYS.KUPW$WORKER
18E96684         2 anonymous block
Job "EGIFT"."SYS_SQL_FILE_FULL_01" stopped due to fatal error at 00:16:31and this error always comes when it turns to generate sql for the triggers.
i am facing this error continuously.
thanks

Hi,
Its an unpatched db.So you must patch it first.Here is what is mentioned about this error
39125, 00000, "Worker unexpected fatal error in %s while calling %s [%s]" // *Cause: An unhandled exception was detected internally within the worker
// process for the Data Pump job while calling the specified external
// routine. This is an internal error. Additional information may be
// supplied.
// *Action: If problem persists, contact Oracle Customer Support.
So the better part is to contact Support.See if this thread can help you.Its not having much but still ,
Error ORA-39125 and ORA-04063 during export for transportable tablespace
Aman....

ERROR: ASU has quit unexpectedly. ERROR: Media DB Error : 18

I'm using the Creative Cloud on my iMac (OS 10.7.5) at work and whenever I try to download anything from my apps, whether that be installing new software or downloading updates to my existing software, I get this error message:
Exit Code: 15
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
ERROR: ASU has quit unexpectedly.
ERROR: Media DB Error : 18
It's super frustrating because I would love to update to the CC 2014 version of all my programs. Also, my co-workers who are working on the same machines and same Adobe Cloud set-up haven't had any issues with it. Does anyone have and idea what could be causing this error?
Thanks for the help!

sign out and then back in to your cc app.
if that fails to resolve the problem, follow solution 2 here, CC desktop lists applications as "Up to Date" when not installed

Error is not getting logged in error file while running dataload maxl

Hello All,
I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
I am using the Maxl -
import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
Any inputs please...
Thanks

Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
on error append to 'D:\Hyperion\logfiles\myload.err';
cheers, chris

An error occurred during the installation process: error occurred while installing additional adobe

I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB.   Any one else with same issue?   Trevor

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Error:COMMON-1: Some unexpected internal error has occured.

Error:COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
Error: No response from the device "a.b.c.d/161". Check SNMP communities, version or network for issues.
Above errors are seen on accessing WLC for config purpose from WCS. Seen after migrating WCS 4.2.62 to a new hardware and restoring the backed config.
OS and software versions remain the same, only new hardware is an upgraded one.
The original server is now put back in place and works .. just fine.

In this migration, everything is absolutely same except the hardware.
Same WLCs, same WCS version. IP/hostname/configs all same.

When opening OWA getting error identitiy not verified

Dear All,
Need help on the same, we have deployed a third party SSL certificate on my CAS server 2010 previously it was running with self signed certificate, but after applying certificate it was having some problem so we roll back and removed the certificates
from Server, but now users are facing error duinring opening OWA site giving ssl certificated error, it says identity not verified and https is coming in red and stirked out.
Regards,
Sudhir

Hello,
Please follow the Ed's suggestion. Try to apply a SAN certificate to check the result.
Here is an article for your reference.
http://technet.microsoft.com/en-us/library/aa995942(v=exchg.141).aspx
Cara Chen
TechNet Community Support

EXPDP error - ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOA

Greetings All,
Oracle 11g (11.2.0.0) on Windows 2008 R2
I am getting the error below during a schema export of just 1 particular schema. Other schema expdp’s don’t encounter this problem.
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [REF_CONSTRAINT:"CM_MASTER"."PPY_PEN_FK"]
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8165
----- PL/SQL Call Stack -----
object      line object
handle    number name
000000047B38A000     18990 package body SYS.KUPW$WORKER
000000047B38A000      8192 package body SYS.KUPW$WORKER
000000047B38A000      2823 package body SYS.KUPW$WORKER
000000047B38A000      8847 package body SYS.KUPW$WORKER
000000047B38A000      1649 package body SYS.KUPW$WORKER
000000047A576CD0         2 anonymous block
Job "CM_MASTER"."EXP_CM_MASTER" stopped due to fatal error at 17:11:30I have deleted the identified constraint, but then errors out again on another constraint.
I have found a tentative resolution for the ORA-39126 error (delete database stats, then gather database stats) but have not done so yet.
I have tried deleting the statistics for just the schema (cm_master), and then re-gathered stats for the same schema. Still get the error.
I am concerned about the ORA-04063: package body “XDB.DBMS_XDBUTIL_INT” has errors.
I have unlocked and set new password for the XDB user, but am not able to logon as XDB to re-compile the package body in question.
We had some maintenance applied over the weekend that “revoked execute from public” on the following packages:
dbms_datapump
dbms_crypto
dbms_crypto_toolkit
dbms_java_test
dbms_random
dbms_sql
utl_file
utl_http
utl_mail
utl_smtp
utl_tcpThe user performing the export with the problem (cm_master) was then granted execute back on the following packages:
dbms_datapump
dbms_crypto
dbms_random
dbms_sql
utl_file
utl_http
utl_mail
(not: dbms_crypto_toolkit, dbms_java_test, utl_smtp, utl_tcp,)Other schemas were granted execute on the following packages and are NOT having expdp problems:
dbms_datapump
dbms_sql
utl_file
utl_http
utl_mail
(not: dbms_crypto, dbms_crypto_toolkit, dbms_random, utl_smtp, utl_tcp )I don't think the public revokes are causing this error because the "Other schemas" do not have this error and were not specifically granted back all of the public revokes that cm_master received back.
I appreciate any suggestions.
Thanks for your time,
Bob
Edited by: Snyds on Jun 5, 2012 10:03 AM

rjamya,
I checked dba_registry, all 18 rows returned are VALID.
I attempted to compile the package body identified in the error messages:
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errorswith
alter package xdb.dbms_xdbutil_int compile body;I got thje following results
Error starting at line 60 in command:
alter package xdb.dbms_xdbutil_int compile body
Error report:
SQL Command: package XDB.DBMS_XDBUTIL_INT
Failed: ORA-24344: success with compilation error
24344. 00000 - "success with compilation error"
*Cause:    A sql/plsql compilation error occurred.
*Action:   Return OCI_SUCCESS_WITH_INFO along with the error code
package XDB.DBMS_XDBUTIL_INT altered.Any other suggestions regarding how to resolve errors in the XDB.DBMS_ packages?
I also tried granting CM_MASTER execute on the packages that I revoked execute to PUBLIC on, with no effect.
I tried “exclude=REF_CONSTRAINT” on the export, the problem seemed to move to the next section:
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 96.31 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/DB_LINK
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [PACKAGE_BODY:"CM_MASTER"."SR_MAINTENANCE"]
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8165
----- PL/SQL Call Stack -----
object      line object
handle    number name
000000047B38A000     18990 package body SYS.KUPW$WORKER
000000047B38A000      8192 package body SYS.KUPW$WORKER
000000047B38A000      2823 package body SYS.KUPW$WORKER
000000047B38A000      8847 package body SYS.KUPW$WORKER
000000047B38A000      1649 package body SYS.KUPW$WORKER
000000047A576CD0         2 anonymous block
Job "CM_MASTER"."EXP_CM_MASTER" stopped due to fatal error at 19:36:23I tried the suggestion from my Google-ing, drop database statistics, then gather database statistics. No effect, same error.
I also tried granting CM_MASTER execute on the packages that I revoked execute to PUBLIC on, with no effect.
Again what seems odd is that I can export other schemas without errors.
Any other suggestions, please.
Thanks,
Bob
Edited by: Snyds on Jun 5, 2012 12:04 PM

Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR

I have the following connection error in SM59 ...
Connection error        program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
RFC Destin = CCCOM
Type = T
Gateway Host = ntchsapqas
Gateway service = sapgw00
ERROR                program ZCCCOM_NZ_PMH01 not registered
LOCATION             SAP-Gateway on host ntchsapqas / sapgw00
DETAIL               TP ZCCCOM_NZ_PMH01 not registered
COMPONENT            SAP-Gateway
COUNTER              19364
MODULE               gwr3cpic.c
LINE                 1593
RETURN CODE          679
SUBRC                    0
RELEASE              46D
TIME                 Tue Jun 10 14:47:28 2008
VERSION              2

Something helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

Error while using RSDRI_INFOPROV_READ : parallel processing error

Hi
I am also facing parallel processing error while using the function module RSDRI_INFOPROV_READ in transformation.
when only one data package is there, the load happens without any issue. But when multiple data packages are involved the load fails with an error "Exception in parallel processing".

Hi Lijo,
I got the following information from the function module documentation of the FM RSDRI_INFOPROV_READ.
If neither I_SAVE_IN_FILE nor I_SAVE_IN_TABLE are set, then the return takes place in the form of packages (that is an internal table), of value I_PACKAGESIZE. A negative value means that the return should be in one package.
Prathish.

Error: "Transaction not posted due to errors in price determination"

Hello,
Please tell me why this error occurs "Transaction not posted due to errors in price determination"
for purchasing document.
I have checked the PO and it contains all the valid pricing details.
Then why the error?
Thanks & Regards,
Priyanka

Hai
Check ur Pur.Grp and the Vendor U are using some time u may be using the differrnt vendor grp and pur grp or pur org thru which the pricing procedure hets triggered
thnk u
with rgds
moosa anis

Macbook Air not verifying updates, getting errors

Ok, so earlier today I was trying to update to 10.7.4, and multiple times I got the error the Mac OSX update could not be expanded, and corrupted during download. PLease try again. I tried over and over to get it to work, manually downloading it, resetting pram, smc, and repairing the disk and disk permissions in recovery mode. All of this to no avail. So I was trying to partition the hard drive to find out what was going on and accidentally deleted my entire hard drive. I didn't have anything important on it so Im not sad there, but when it was time to install lion, I went through all of the steps and license agreement, and tried to download it. I did this twice and it got stuck in an eternal download loop, not downloading anything. This is odd because I have 40 mBits internet. It was not my internet as I could use it on every other computer. So I broke out my old snow leopard install usb drive, and now have snow leopard. But now it won't install updates either. I performed hard drive checks and it all says it's all right. I also completed a quick hardware scan and nothing came back. RIght now Im running an extended test. I NEED SOMEONE TO HELP ME!!!! I have no idea whats wrong and my warranty ran out because I couldn't afford it at the time.
Thanks to anyone,
Truman
the extended test just finished and found no problems. I can use the computer just fine for internet and stuff but cannot download updates, and now Im stuck in snow leopard

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

AS2 Receiver Error: MIC not verified # unexpected-processing-error

Similar Messages

Maybe you are looking for