Direct BW Query Connectivity Option in Xcelsius

Hi Experts,
I have just attended Tech Ed-2009 , and found that Xcelsius offer the direct connectivity to Bex Query.
Which Xcelsius version offer this functionility ?
I have Xcesius Enterprise - 2008 at Sp-2 level , however i don't see any direct connectivity option there.
I have seen the interface in tech Ed and there is option of "SAP" on the top left where the file and edit and view appers.
Please help me in finding that version ?
Also is that version is available for trail download ?
Thanks
Ashwani

Hi,
Which Xcelsius version offer this functionility ?
Xcelsius Engage 2008 SP2 only.
Refer this blog, which is explain you, sopftware needed
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID0762448650DB01786970309113616906End?blog=/pub/wlg/14966
This for how to create dashboard using direct BI connection
Connecting SAP BI Directly with Xcelsius 2008
/people/rashmi.gurjar/blog/2009/11/18/connecting-sap-bi-directly-with-xcelsius-2008
You can also download the trial version from this link
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Regards,
Senthil k

Similar Messages

SPARQL query with OPTIONAL

Hi,
When I run a SPARQL query with OPTIONAL in the WHERE clause, I saw a lot of "select 1 from ***" kind of queries got executed. The query runs very slow. I'm running Jena adaptor 2 against Oracle 11.1.0.6. We have about half million triples in the model. The queries we need to run tend to be complex and they run pretty slow. Does Oracle 11.1.0.7 have big query performance improvement over 11.1.0.6? Is there anything that we can do on the application side or on the database side to boost the query performance? Thanks,
Weihua

Native database support for OPTIONAL in SEM_MATCH based RDF query has been made available via patch 7600122 on 11.1.0.7. Direct use of SEM_MATCH to query your data from SQL has significant performance benefits.

Unable to run Direct SQL Query - Error Odbc driver returned an error (SQLEx

Hi,
I have created some answers/reports and dashboards which are working fine.
However when I try to run an SQL statement on "Create Direct Request" under "Direct Database Request" I get the following error:
error : State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27022] Unresolved Connection Pool object: "rnd1.Connection Pool". (HY000)
error : SQL Issued: {call NQSGetQueryColumnInfo('EXECUTE PHYSICAL CONNECTION POOL "rnd1.Connection Pool" select count(*) from dim_issue')}
I am working as an admin user who has the rights to create direct sql query.
Any help here will be highly appreciated.
Thanks, Rohit

hi,
27022 Unresolved Connection Pool object: "rnd1.Connection Pool". (HY000
have you declared correctly your Connention Pool?Or the query you write is it correct?
check again you connection pool

Getting BEx query header data into Xcelsius for line chart Category Labels?

Hello - Is it possible to get header data from BEx queries into Xcelsius so they can be used for Category Labels in a line chart?
We have a BEx query that displays 16 weeks of shipment trends by column and text variables are used to display the respective date selection for each of the weeks in the query header but When connecting QaaWs to Xcelsius, the header row does not get displayed.
When using LiveOffice, the header row seems to come thru with the correct dates for each of the weeks but if you are stacking more than one connection than you will get an extra header row for each connection.
Are there any tricks to hide a header row in a LiveOffice document?
Is there anyway to display the header row from QaaWs in Xcelsius?
Any other work arounds?
Thanks,
Derek

Derek,
Below are my inputs...
-->Using QAAWS you will not be able to get the header data, so you will have to maintain header data manually in Xcelsius (Spreadsheet).
-->Using Live office you will be able to get the header data, and if you are using multiple live office connections, then you need to use cell reference formulas and format the spreadsheet (Xcelsius) as you require.
-Anil

Facebook Connect Option - FAQs

Some FAQs on the new Facebook Connect option.
What is Facebook Connect?
Facebook Connect is an application which allows the authentication connection between Facebook and the community to work in both directions. Community members can connect their community accounts to their Facebook accounts and Facebook users can register in the community from Facebook.
In both cases, this means users can sign in to both applications by logging in to either. So if you log into the community and then bring up a tab for Facebook you will automatically be logged in. Similarly, if you log out of one, it automatically logs you out of the other.
What should I do if I don’t want to connect my Facebook account to my community account?
You don’t need to do anything. This is an optional choice and no connection will be made unless you click on the link to connect the two. You just continue logging into the community as normal.
What should I do if I connected my Facebook account but have changed my mind? I no longer want the two to be connected.
You can easily disconnect this through your community settings. This can be done at any time.
Click on the link for ‘My Settings’ at the top right of you screen:
Click on the tab called Social Connect. If your account is connected you will see this screen:
To disconnect, click on the blue link which says ‘Disconnect from your Facebook account’
You will then see this confirmation message which means the two are no longer linked.
You will now need to sign in to the community and Facebook separately.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have.
I got the 'like' button to work, but I can't seem to get the comments going.
http://developers.facebook.com/docs/reference/plugins/comments
That line of code does nothing in an HTML snippet.
I also tried it with another iframe from another piece of code and it didn't do anything but re-size the box.

SAP BO Analysis "Show Connections" option inactive

Hi all,
While trying to open a workbook or a datasource in SAP BO Analysis for Excel, I am trying to locate SAP systems which are not included in my local "SAP logon". Though, the option of "Local System" in the show connections option of SBO Analysis is my only option as the dropbox is inactive.
According to the User Guide, all other options (All/System/Cube/Infoprovider/Query/Query View) which are included in the "Connections" section are referring to Business Objects Enterprise which is not my case.
Any ideas will be much appreciated.
Thank you.

Hi,
We are using web based INI and while accessing through advance analyzer we are not able to see list of all sap systems in the sap log on pad. We are getting blank window as you see in below screen shot. Where local system is disabled, please guide me here to unable the all sap system in log on pad.
Thanks in advance.
Regards,
Mithun.

ONS 15454 MSTP Client Connection Options

Hi!
Have questions regarding client connection options to ONS 15454 MSTP. FYI, I have experience on ONS 15540 ESPx and I usually connect client to the ONS using transponder like this
ONS 15540 ESPx
Client<->transponder<->OADM<->OADM<->transponder<->client
I am new to ONS 15454 MSTP and from the reference manual I understand that the it can be configured as hub, passive oadm, anti ase etc. My questions is how does the client get connected to each of this configurations
For example, for a passive or amplified nodes the client connections would be like this
ONS 15454 MSTP
client<->transponder<->OADM<->OA<->OA<->OADM<->transponder<->client
What about hub nodes where mux/demux card are used, where does the client connect,I do understand that these cards have to be used in pairs.
As always,appreciate your expert opinions and if you can point me to a web link that would be even better. Many Thanks.

In both cases, the client (assuming it has a non-ITU output) will connect via a transponder or muxponder card. This takes the client signal and converts (with multiplexing in the muxponder case) the client signal into an ITU wavelength.
On the MSTP, the ITU port on the transponder/muxponder is then physically patched into the appropriate port on either ROADM, OADM or Mux/Demux cards.
To directly answer your question, on a hub node equipped with Mux/Demux cards, the Tx from the Transponder is connected to the Mux card, and the Rx connected to the Demux. Likewise, at the node where the wavelength is dropped (eg at an OADM site), there will be an equivalent transpoder connected to the OADM module (Tx and Rx at wavelength xyz).
The transponders/muxponders may be in the same shelf, separate shelves, or you may use a direct ITU connection from devices such as a DWDM GBIC, an SDH DWDM card or 10GE XENPAK from Catalyst 6500.
As long as you have designed the network to take the appropriate interface types into account, you should be fine.

What connection options do I have in transfer of data from my macbook pro 13" to my iMac

What connection options do I have in transfer of data from my MacBook Pro 13" to my iMac?

If available, use a Firewire cable and put the origin in Target Disk Mode. That's how I rescued all my stuff, all 150GB of it, from my now dead Early '08 MBP to my current one.
With the new crop, I believe you can use the Thunderbolt ports as well.

Input Readiness of Query with optional variables

Hi,
I built one input ready query which is input ready upon execution with only one set of selections, for any other set of selections, it is not input ready.Query is built on aggregation level on the top of multiprovider. There are no data slices built, No lock entries in RSPLSE as well. Is it like if a variable in the selection screen of the query is optional, will it be moved to free characteristic and because of that input readiness of the query will disappear?? In my case, country is authorized variable which is optional. Please let me know if any one has solution for this.
Thanks,
Bindu

Hi,
Check if:
1. You have added characteristic InfoProvider in filter area and restricted that to your plan cube?
2. Any Keyfigure in query will have input-ready cell only if all the characterictics in the aggregation level of that query has unique values for that cell.
In your case you have moved Country to free characteristic area and might have not provided any value for it as it's optional. So system is not finding a unique value for this characteristic for input-ready cells.
Enter value for Country variable and then execute, query will be input-ready.
Regards,
Deepti

Dual External Independent Monitor Connection Options

Folks -
I am trying to understand my connection options that will allow me to achieve two independent monitors. My hardware is a TP T410 (2518-4JU) (Nvidia NVS 3100M) and a docking station Type 4338 (PN 45N5888 FPU PN 45M2490). The docking station offers VGA DB-15 connector, 2 each DVI connectors and 2 each Display Port (DP) connectors.
I think I understand that I can use.....
VGA port and any ONE of the available digital ports
or
both DVI ports
or
both DP ports
or
one DVI and one DP connector
Does that seem correct?
My monitors will accept VGA or DVI connectors and they run at 1920 x 1080.
I also want to mirror one of the monitors onto a HDTV via the HDMI port on the HDTV (don't want to use the computer connection port on the TV). I plan to split one of the digital outputs and then adapt up to HDMI cable for the run to the HDTV.
Will I encounter problems with the HDTV HDCP protocol since the signal is getting split?
Thanks for your support!

When did you buy the T410? also did it came with optimus technology?
if it is the standard nvidia gpu version, then the display output options you mentioned is correct. If your T410 came with nvidia optimus, then it will support 4 external LCD.
Not sure how HDCP protocol will be affected when the signal gets split.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

11g OLAP cube MV's with Query Rewrite option

Hi All,
I am trying to test the 11g OLAP cube MV's with the Query Rewrite option.
I had created a cube on the schema OLAPTRAIN problem by oracle. I an selected necessary options in 'Materialized Views' tab of the Cube definition in AWM. here is the screenshot
!http://i40.tinypic.com/9jzpte.png!
and then I try to run the SQL query
select SUM(S.QUANTITY) AS QUAN,
SUM(S.SALES) AS SALES,
T.CALENDAR_YEAR_NAME,
P.DEPARTMENT_NAME,
C.COUNTRY_NAME
FROM
TIMES T,CUSTOMERS C,PRODUCTS P, SALES_FACT S
WHERE
C.CUSTOMER_KEY = S.CUSTOMER AND
T.DAY_KEY = S.DAY_KEY AND
P.ITEM_KEY = S.PRODUCT
group by T.CALENDAR_YEAR_NAME, P.DEPARTMENT_NAME, C.COUNTRY_NAME;
and observed the Explain plan, it is not using OLAP cube built, instead it is using the relational tables given in the above sql query.
Also, i have observed that , though enabling or disabling of the Query Rewrite option doesn't make any change in the Explain query for the above query.
alter materialized view olaptrain.cb$sales_cube enable query rewrite;
alter materialized view OLAPTRAIN.cb$sales_cube disable query rewrite;
No idea why is this Query Rewrite feature is not working on my Database instance of 11g R2 . Do am I missing any steps that has be taken care of , to make this working. Any inputs would be appreciated.
Thanks
S

Hi there,
You should check out Note 577293.1 on Metalink - 'Oracle OLAP 11g: How to ensure use of Cube Materialized Views/Query Rewrite'
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Sybase connection tab not showing in New connection option in SQL developer

Hi,
I do not see a Sybase connection tab in New connection option in SQL developer 2.1 where as it was available in ver 1.5
Why is that? how to fix it?

Hi,
Have you installed the JTDS JDBC driver yet into SQL Developer.
This is required before you get the connection tab for SQL Server and Sybase.
You can install the JTDS driver from the Check For Updates action.
Regards,
Dermot
SQL Developer Team

Remote Query execution option

Hello Experts,
I have installed and configured Intercompany 2.0 for testing, during which I could not find remote query execution option which was there in earlier version.
Is there any setting to be done to enable this feature in new version.
Thanks
Deepak

Hi Deepak,
To access the Remote query execution feature of Intercompany, you are required to enable the SAP B1 user for the same. Follow the steps below to enable Intercompany solution Remote Query Execution feature:
Log in SAP B1, navigate to Administration--> Setup--> Users and search the user.
On Users-Setup screen, select Can Use Remote Query Execution check box and choose Update button.
3. Now, using this user, login SAP B1 and open Query Manager window.
4. Now on Query Manager window; Select a query, choose either of following options and execute          the query:
     Local: To execute and pull data from the logged in company.
     ALL   : To execute and pull data from all intercompany configured companies.
     Selection: To execute and pull data from a selected set of intercompany configured companies.
Refer to Intercompany Integration Solution User Guide for further information related to Remote query execution.
Regards,
Agneesh Jain
SAP Intercompany Team

Cannot view history of direct access users connecting to Forefront UAG

Hi, I'm trying to get a list of the users that have been connecting through UAG Direct Access for the past month. I've tried using the methods shown in the technet articles about monitoring of UAG Direct Access either using Powershell or the TMG event loggin
console, using this links:
http://technet.microsoft.com/en-us/library/gg313776.aspx
http://technet.microsoft.com/en-us/library/gg313783.aspx
Using the TMG event logging I see a lot of data from a few days back, even if the filter is set to 30 days, and the log is supposed to be up to 8GB in size before overwriting. The info that it shows is only about sessions to the portal trunk and not direct
access. I know this because on the UAGModuleID column there is no there are no "connected" or "managed" sessions, all are SessionMgr, UserMgr, Filter and RDG mainly.
Through powershell I tried running the following commands after importing the module according to the article:
Get-Directaccessusers -showhistory $true and no results are shown.
Get-Directaccessusers -showhistory $true -starttime "1/6/2015 8:00AM" and no results shown
Get-Directaccessusers -showhistory $true -starttime "1/6/2015" no results
Get-Directaccessusers -showhistory $true -starttime "1/2/2015 8:00AM" -Endtime "1/11/2015 8:00PM" no results
Get-Directaccessusers -showhistory $true -username user = no results.
Get-Directaccessusers -username user = no results
the only command that shows any data is just Get-Directaccessusers but that shows the current Direct Access users, no history.
I checked the Registry HKEY_LOCAL_MACHINE\SOFTWARE\WhaleCom\e-Gap\von\MonitorMgr\sql-builtin-log registry key and it is on 1.
Any ideas on how can I get more history data on the direct access users connecting through UAG?
Please let me know.
Appreciated it.
Thank you!
Eduardo Rojas

Russel,
the problem has been solved now! The final thing missing was just a check in a checkbox.
Below a comprehensive explanation that may help others.
We basically did what you proposed:
We sent a ping from one of the DA-Clients to the TS-Farm members. Since we got replies, we knew that IPv6 communication generally is okay. The answer received was an IPv6. In this scenario we had not yet given any IPv6 to the farm-members! Thus we knew it must
be comming from the DA DNS-Proxy. There are a number of DA-GPOs and one of them is dictating the net portion of the IPv6 to be used in DA-communication, appended by a hex-translation of the target computers IPv4. Therefore the DA DNS-Proxy is taking the GPO-set
IPv6-value, adds the IPv4 in hex and sends it back as an ICMP echo.
With this in place and working correctly one can ping any domain host from any DA-Client. This is configured when initially setting up DA and is handled by the wizzard. Once DA is installed this should all be in place without extra user interaction.
We then took those IPv6 answeres and turned them into fixed IPv6es of the farm-members (each member its own IPv6). So far so good, but this is where it still did not work. Evaluation of the Connection Broker log showed that the redirect reply still included
only the IPv4 of the target farm-member. With that (after a short while) we realized that one has to set a
check in the Connection Brokers Settings, so that the IPv6 LAN-Connection will be used for redirects as well and not only the IPv4 LAN-connection..... How stupid is that? :-)
But as we all know - in dealing with server configuration - you should always "know before you go". But even though you may think you do, when finally arriving you know you didn't.... And that's what we call experinece.
Thanks to Russel for your interest and help.
Brgds Ralf

Direct Database query limit

Hi everyone,
I got a weird error when running a direct DB query. I didn't save the text, but it seemed as if I had reached the limit of the direct DB query.
Does anyone know if there is a limit and what that is?
-Joe

Hi joe,
I got a weird error when running a direct DB queryWhat was the error you got into??
but it seemed as if I had reached the limit of the direct DB query.According to my knowledge you can write a big query in the space provided,neways if you think it is due to the limit then first create that query as a database view then it would be easy for you.Then you can directly use the view in the direct DB request.
Hope it helps you.
Best Wishes,
Kranthi.

Direct BW Query Connectivity Option in Xcelsius

Similar Messages

Maybe you are looking for