Directly access iview in Portal without furthernavigation when URLis clickd
Hi Gurus,
My requirement here is that :
1. when a users wants the portal screen to get displayed when he clicks a link in the Workflow
2.And he should enter the Login credentials and after then he should go directly to Particular Iview.
3.No further Navigation should be there.
Is it possible to do.
If so Please help me in doing this
Regards,
Anand.
Hi,
You can build the URL to your portal component like this:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/appName.compName
Check this for explaination on the above URL:
http://help.sap.com/saphelp_nw70/helpdata/EN/44/42c2ed81ce2152e10000000a114a6b/frameset.htm
This call will first show login screen and then after successful authentication, shows the component.
Regards,
Praveen Gudapati
Similar Messages
-
Ok So I have windows 8.1 with Direct Access Client and it works fine when I am able to check and uncheck proxy settings - which is a bit of a pain and seems unnecessary (I hope). If I take the laptop to a Starbucks I get the error that the proxy server is
not responding so it never redirects for me to "accept" the rules.
If I uncheck my proxy settings it then redirects and connects to their internet wifi and off I go - DA connects and all is well.
I am using a GPO to configure the proxy settings as shown (all options are greyed out for the users)Hi,
Your problem is a classic one when using that kind of proxy settings, unfortunately.
To solve this without the need of user interaction, there are two solutions that will sort this out for you. In your case, if you want to use your corporate connection for internet traffic even over da, I'd opt for alternative 1 or 2 depending on what you are
trying to achieve.
1. WPAD (Web Proxy Auto Discovery protocol http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol) - it actually uses the Automatic browser configuration checkbox on your client and looks for the file wpad.dat on a specific web server that you Pointout
with either dns-record called wpad or DHCP option 252.
2. Auto configuration script (pac script http://en.wikipedia.org/wiki/Proxy_auto-config) - uses the same kind of file as above. The difference is that you get the possiblity, like you want in your scenario to target what users that should get the script.
See this below article for more details on the options you have.
http://technet.microsoft.com/en-us/library/dd361918.aspx
http://techlib.barracuda.com/display/WSFLEXv41/How+to+Configure+Proxy+Settings+Using+Group+Policy+Management
Let us know if you need further assistance!
/Johan
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure -
Error While Accessing WD ABAP iView from Portal
Hello Everyone,
I have created an iview from ABAP WD in portal. Now, when I have assigned this role to a user without admin role it is throwing the following exception. I would greatly appreciate your help.
Exception ID:02:42_23/09/09_0037_107611250
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/myfolder/com.SalfordCityCouncil.ESS10/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.SalfordCityCouncil.PurchaseOrder/com.scc.ivu.CreatePurchaseOrder
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : TRAVELTU2
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
Regards,
Gopal.Hi,
It looks like a permission issue. You should check the permissions of the folder containing the system in the portal. (System Administration > System Configuration then Open Permissions on the system object). Every user who is supposed to have access to the iView should be there as End User (for instance : Everyone (group), Administrator = none, End User = checked).
Regards,
Pierre -
BI iviews not working without super admin role in portal
Hi all,
I have published reports to the portal from BI and then created Bex iviews using the querystrings and attached iviews to roles.
They all run with my user ID which has super admin access.
But for the end users the we get a portal runtime error when he tries to view the report through iview.
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:24_31/03/11_0185_2598150
Refer to the log file for details about this exception.
If I give superadmin role to the end user the iviews run fine.
Please tell me how to access this iview without superadmin role.
Regards;
Anzar
Edited by: anzar naik on Mar 31, 2011 2:58 PM
Edited by: anzar naik on Mar 31, 2011 2:58 PMWhen it works with super admin rights but not with end-user permission, it's a permission problem. Have you tried to find out where the user is missing the necessary permissions?
- iView
- PCD
- security zone
- Access to backend (BI server)
- BI query
br,
Tobias -
Portal runtime error when trying to create new Iviews in EP
Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AMKrishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi -
Error when accessing Direct Access Infocube (SAP BW) in WEBI
Hi all,
I'm using SAP BW as the DataWarehouse and here I have created a Direct Access Infocube that is reading data directly from datasource in SAP ERP.
I have built a query on top of the Infocube and I'm able to run the query and extract data when running the query through BEx Query Designer and SAP BW Portal.
The BW system is connected to a SAP BO system and I have connected a Webi report via BICS connection to the query.
The BO system is setup so that all BW users is replicated into SAP BO and the authorization in SAP BW is the one controlling the access to the data users are able to view in BO reports.
When running the Webi report with a development user (SAP_ALL in BW system), the Webi report is able to extract data.
When running the Webi report with a business user (that only have relevant roles to view data from relevant Infoproviders, among other the Direct Access Infocube), we get the following error message:
This means that when running Webi that is loading data directly from SAP ERP, via an Direct Access Infocube in SAP BW, a normal business users with reporting/read authorization, IS NOT ABLE to access the data.
Does anybody know what kind of authorization that is needed to get this report to work? Or does anybody have seen similar issues or errors before?
regards
OddmarHi,
did you make sure the universe is done correct ?
in terms of connecting to the cube take a look at this material and certain elements such as navigational attributes and authorization are not possible to resolve when using the cube
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008d15dc-f76c-2b10-968a-fafe5a121129
Ingo -
Unauthorised users accessing iviews through a direct URL
Hi,
How do you prevent unauthorised users from accessing iviews through a direct URL? e.g. From the BeX Web Template on testing a query a URL is known, this URL can then be used by user who have no rights to view/ execute this report (after portal logon).
Can security zones be defined for the BeX iviews? If yes, how? Does setting the parameter Dcom.sap.nw.sz=true solve the problem?
Appreciate your input.
Many thanks,
DharmiHi Bharath,
Thank you for the input.
Can you please be more specific as to which BW component ?
I navigated to
Go to permission editor: 'System Administration' -> 'Permissions' -> 'Portal Permissions'.
folder: 'Security Zones' -> 'sap.com' -> 'NetWeaver.Portal' -> 'high_safety'
There the rights are ok.
Best regards,
Dharmi -
I have setup a new cloud ID.
I now need to verify my account via email.
How can I do this when I can't access my iCloud email without verifying account?Did you click the Verify Now link in the verification email from Apple (see image below)? If not, make sure you are checking the email address you used to set up your iCloud account. Also make sure you check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
LDAP users Faicng Error While Accessing the ESS Iviews in Portal
Hi,
My Portal is SAP EP 7.0 SP20 And ECC 6.0 SP16.
UME users able to access the ESS MSS Iviews.But only one LDAP User only access ESS/MSS Iviews Other getting the Below error.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator
Syntax error in program CL_XSS_CAT_BUFFER=============CP ., error key: RFC_ERROR_SYSTEM_FAILURE
Syntax error in program CL_XSS_CAT_BUFFER=============CP ., error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Syntax error in program CL_XSS_CAT_BUFFER=============CP ., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:205)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
at com.sap.pcuigp.xssutils.navi.FcNavigation.onInit(FcNavigation.java:314)
at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.onInit(InternalFcNavigation.java:358)
at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.onInit(FcNavigationInterface.java:145)
at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.onInit(InternalFcNavigationInterface.java:142)
at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.onInit(InternalFcNavigationInterface.java:278)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
at com.sap.pcuigp.xssutils.roadmap.VcRoadmap.onInit(VcRoadmap.java:188)
at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmap.onInit(InternalVcRoadmap.java:162)
at com.sap.pcuigp.xssutils.roadmap.VcRoadmapInterface.onInit(VcRoadmapInterface.java:153)
at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface.onInit(InternalVcRoadmapInterface.java:144)
at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface$External.onInit(InternalVcRoadmapInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Syntax error in program CL_XSS_CAT_BUFFER=============CP ., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.pcuigp.xssutils.xssmenu.model.MenuModel.hrxss_Ser_Getmenudata(MenuModel.java:171)
at com.sap.pcuigp.xssutils.xssmenu.model.Hrxss_Ser_Getmenudata_Input.doExecute(Hrxss_Ser_Getmenudata_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
... 76 more
Thanks & Regrads,
Subba RaoHi,
Now every user facing the same error while accessing ESS Iviews from Portal.
in ST22 Dump is created.
What happened? |
Error in the ABAP Application Program
The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_XSS_CAT_BUFFER=============CP " in include
"CL_XSS_CAT_BUFFER=============CM00C " in
line 50:
""L_CATSDB" and "L_CATSDBCOMM" are not mutually convertible. In Unicode"
" programs, "L_CATSDB" must have the same structure layout as "L_CATSDB"
"COMM", independent of the length of a Unicode character."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
terminated because it has
| come across a statement that unfortunately cannot be executed.
What we need to resolve the above issue.
Thanks & Regards,
Subba Rao -
Error when launching Key figure monitor iview in portal
Hi all,
I get an error when launching a key figure monitor iview in portal ; the error is RABAX-STATE
In r/3 under transaction ST22 i got following :
"UNCAUGHT_EXCEPTION" "CX_WDR_RT_EXCEPTION"
"CL_WDR_INTERNAL_WINDOW========CP" or "CL_WDR_INTERNAL_WINDOW========CM00B"
"IF_WD_WINDOW~SUBSCRIBE_TO_BUTTON_EVENT"
Anybody knows how to resolve the problem?
Regards
GwenHey was your problem resolved ???
I am facing the same problem..
please help!!!
reply asap.
~Veena. -
When has firefox required direct access to the workstations camera?
Can anyone provide an example of when Firefox requires direct access to the workstation camera? I do not know if Firefox even requires access to the camera
Historically, access to the camera was only available through plugins like Flash. The Flash DLL runs in the plugin-container.exe process; if protected mode is in effect, it may also run outside of that process.
I suspect that access through native APIs (e.g., [https://developer.mozilla.org/en-US/docs/Web/API/Navigator.getUserMedia navigator.mozGetUserMedia]) is rare on the desktop. I don't recall getting any requests for it so far personally. -
Error: Object Required apperas when accessing Content Admin Portal Content
After installing Ep 7.0 sp16 Portal and logging in as Administrator we get
Error: Object Required apperas when accessing Content Admin >Portal Content
The same error appears when trying to access System Admin > permissions.
Anything to do with catolog search is throwing Error: Object Required popup.
Appreciate feedback in resolving this.
Rajesh.R.I have just started to get this error as well... On my computer I get the "Error: Object Required" when accessing the Portal Content page but if I log in on someone elses computer using the same browser, OS, etc The error does not appear and I am able to browse the Portal Content.
Any more insight on the resolution to this issue would be appreciated. -
Portal Runtime Error when excecuting a published iview
Hi,
I have an issue concerning the iviews published by the BEx 7.0 to the Portal. I get a Portal Runtime Error when I execute them on the portal.
The log on J2EE server is:
Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>&\#39;; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
My support package levels are:
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
PI_BASIS 2006_1_700 0002 SAPKIPYM02
ST-PI 2005_1_700 0005 SAPKITLQI5
SAP_BW 700 0015 SAPKW70015
BI_CONT 703 0008 SAPKIBIIP8
ST-A/PI 01J_BCO700 0000 -
Any ideas ?
Thanks in advance
ThibautHi Erik,
When we confure system at portal under system admin tab, we wil have a dropdown to display
the system object properties i.e. system alias,test conections ,permissions and delta link tracer.
Here we will find option to add system alias.
And Cache admin will be present at Aministrator level.Ask ur basis to do this.
I m talking in perspective of EP7.0 SP 11.
Hope this helps.
Regards,
Shaila -
Enterprise DNS servers are not responding when using Windows NLB with Direct Access 2012
Hi
We have installed Direct Access 2012 as one server installation:
- Two network cards. First one in DMZ and second one in internal network
- Two consecutive IP addresses configured in DMZ because of Teredo
- PKI because of Win7 Clients IPSec
- Our corporate network is native IPv4 so we use DNS64/NAT64 and DA-server is configured as DNS
- DA-servers are VMWare virtual machines
One server installation works fine and now we want to use Windows NLB as load balancing. NLB installation goes fine too,
but problem is DNS. If we still try to use DA-server as DNS there comes error message below
None of the enterprise DNS servers 2002:xxxx:xxxx:3333::1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
When trying to configure DNS using Infrastructure access setup, DNS cannot be validated when using DA-servers DIP or cluster VIP. Only domain local DNS looks to be ok but those have no IPv6 addressess. So how DNS should be configured when using multicast
NLB?
Tried to remove name suffix then adding again => Detect DNS server => DA-server IPv6 address found => validate => The specified DNS server is not responding...
Then tried to ping detected address => General failure
NLB clusters are configured as multicast and static ARPs are configured too. Both clusters can be connected from those subnets as they should be.
Any clues how to fix this?
~ Jukka ~Hi,
Your question falls into the paid support category which requires a more in-depth level of support. Please visit the below link to see the various
paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
F.19 without granting direct access to FBB1
Dear all,
I know that F.19 after creating BI-session calls transaction FBB1. But we do not want to give direct access to users. Only in background when processing BI-session.
Is there anyone who has an idea?
Thanks,
Best Regards,
AndreaEvery catalog group have a password associated if set initially.After u have given privilege through "Admin: Security > Manage Catalog Groups and Users" ,they will have the option to join catalog groups but with known password otherwise will not be able to do that. So, where is the issue...
Maybe you are looking for
-
Can't rename a file using File.renameTo(...)
Hi, I have a servlet, RenameFile, that receives audio file via HTTP Post and writes it to /tmp/recording.0002002B-0C0022BB-0001.1.20050622.073208.wav. Then it creates directories under /alert_messages directory based on the timing parameters that it
-
Get the tags and hierarchy as output
Hi gurus! What I need to do is to get as output what tags i have in my xml. Also i need to know the hierarchy of these tags. If my XML is this: <root> <person> <name>Mary</name> <role>Queen</role> </person> <person>
-
Products, list of elements and XML in Indesign
Hi, I want to do something with XML in Indesign, but I can't find the solution I have a list of product, and each product is composed of multiple elements, just like that : A product can be made for exemple like that : Product 1 : - P2O5 : 23 g/L
-
Photoshop and cropping. Help!
Hello, I have a problem with cropping images. I have about 2,000 photos that I cropped to the size of 80x60, 100x80, etc. Unfortunately, my actions do not help because some of the pictures are larger and some smaller. Some images are not properly tri
-
How do I restore folders into the folders panel
I am new to LR and I am using LR3. I appear to be digging a massive hole for myself trying to sort out the catalog. When I first got LR, I had initially added just a small number of files just to see how LR worked. At this time I was still completing