.Dis Files getting errored out while migrating

Hi
During migration of a .dis file from one instance to another instance
while opening a .dis file i am facing this error :
Cannot join tables used in the workbook.Item dependency "" not found in the EUL.
Please help me.
Regards
Nakul Venkataraman

First thing to check is that the EULs on both instances are the same. I would suspect that there is a missing join in the target instance between folders.

Similar Messages

  • Which file gets created automatically while migrating from---QNo.113

    Which file gets created automatically while migrating from non-ASM files to ASM diskgroup by using RMAN?
    A. the contol file
    B. the alert log file
    C. the parameter file
    D. the server parameter file
    E. the archive redo log file

    Check this out
    http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10734/rcmasm.htm

  • Which file gets created automatically while migrating

    Which file gets created automatically while migrating from non-ASM files to ASM diskgroup by using RMAN?----No.113
    A. the contol file
    B. the alert log file
    C. the parameter file
    D. the server parameter file
    E. the archive redo log file
    Message was edited by:
    frank.qian

    Reviewing the steps in Documentation provided below:
    Oracle® Database Backup and Recovery Advanced User's Guide
    Migrating a Database into ASM
    http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmasm001.htm#i1016547
    None of the choices are correct.

  • I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    So you have backed up the content of the computer's hard drive, too?
    That usually is a great idea since it is possible to lose use of the system
    if parts of it have accidentally been removed or get over-written, or the
    main system files get corrupted, when the hard disk drive gets too full.
    If you have not trashed the originals of your created content, that remain
    after you made copies on an external hard drive or other device, then
    that is what you'd have to do to reclaim the capacity still in use by them.
    What are specifications of the hard disk drive? The unused capacity
    verses the used, in GB? If the hard drive has less than 15 to 20%
    free or unused capacity, you could run into trouble. Mine are 40-50%
    unused hard drive space, so ample room is available for automatic
    Virtual Memory to use that capacity as temporary swap file space.
    This is helpful when the computer could use more physical RAM
    memory capacity, but doesn't have it. Or if the RAM is maxxed out
    and you can't add any more. Virtual Memory is part of OS X and the
    system automatically can use as much as is available, but it is better
    to be sure there is plenty of resources available to include chip RAM
    as well as unused or free hard drive capacity for use as VM.
    If for some reason your files in Trash won't go away when you empty
    it, you may have to restart. Be sure you have not included any System
    files in the content in the Trash, or the Mac may not start up later on.
    You may have to boot the computer from the install-restore OS X DVD
    and run Repair Disk from its version of Disk Utility, to be sure it's OK.
    I'm guessing that by now you know enough about the vintage system
    in the older hardware to figure it out, so I won't write about it now.
    In any event... hopefully you can simply trash the files, but check them
    carefully, & you may need to remove (copy to archive first) even more.
    Good luck & happy computing!

  • Getting error message while opening PDF file.

    Hello Experts....
    I'm getting error message while opening the attached PDF file in mail.
    I'm Sending the payslip to mail which is converted into .PDF format.
    Where exactly the problem i m not getting.
    Please help....

    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid                    = rqident
            no_dialog                      = ' '
           DST_DEVICE                     = out_parms-pdest
          PDF_DESTINATION                =
           get_size_from_format           = out_parms-pdest
          IMPORTING
            pdf_bytecount                  = bytecount
           pdf_spoolid                    = pdfspoolid
          LIST_PAGECOUNT                 =
           btc_jobname                    = jobname
           btc_jobcount                   = jobcount
          TABLES
            pdf                            = out_tab
          EXCEPTIONS
            err_no_abap_spooljob           = 1
            err_no_spooljob                = 2
            err_no_permission              = 3
            err_conv_not_possible          = 4
            err_bad_destdevice             = 5
            user_cancelled                 = 6
            err_spoolerror                 = 7
            err_temseerror                 = 8
            err_btcjob_open_failed         = 9
            err_btcjob_submit_failed       = 10
            err_btcjob_close_failed        = 11.
      IF sy-subrc NE 0.
      ENDIF.
    *CALL FUNCTION 'BAPI_GET_PAYSLIP_PDF'
    EXPORTING
       employeenumber       = PERNR-PERNR
       sequencenumber       = '00001'
       payslipvariant       = 'PAYSLIP-PM'
    IMPORTING
      RETURN               =
      PAYSLIP              = PAYSLIP
      PDF_FSIZE            =
    ******************CONVERTING PAYSLIP(XSTRING) TO BINARY FORMAT******
    call function 'SCMS_XSTRING_TO_BINARY'
       exporting
         buffer                = payslip
      APPEND_TO_TABLE       = ' '
    IMPORTING
      OUTPUT_LENGTH         =
       tables
         binary_tab            = OUT_TAB.
        check not ( out_tab[]  is initial ).
        refresh i_record.
        clear : i_record.
        call function 'QCE1_CONVERT'
          tables
            t_source_tab         = out_tab
            t_target_tab         = i_record
          exceptions
            convert_not_possible = 1
            others               = 2.
        if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
       do.
         i_record = it_attachment_long.
         append i_record.
         shift it_attachment_long left by 255 places.
         if it_attachment_long is initial.
           exit.
         endif.
       enddo.
        select single ltx into subject from t247
                   where mnr eq pn-begda+4(2)
                     and spras eq 'EN'.
        condense subject.
        concatenate 'Payslip for the month of' subject pn-begda+0(4)
                                  into subject separated by space.
        describe table lt_objbin lines l_att_lines.
        read table lt_objbin index l_att_lines.
        lv_document_data-doc_size = tab_lines * 255 .
        lv_document_data-obj_name = 'Payslip'.
        lv_document_data-obj_descr = subject.
    e-mail body
        clear lt_objpack-transf_bin.
        lt_objpack-head_start = 1.
        lt_objpack-head_num = 0.
        lt_objpack-body_start = 1.
        lt_objpack-body_num = tab_lines.
        lt_objpack-doc_type = 'RAW'.
    LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
        append lt_objpack.
    For e-mail attachment
        lt_objhead = 'payslip.pdf'.
        append lt_objhead.
        lt_objbin[] = out_tab[]."i_record[].
        "describe table i_record lines l_att_lines.
        describe table out_tab lines l_att_lines.
    CLEAR LT_OBJPACK.
        lt_objpack-transf_bin = 'X'.
        lt_objpack-head_start = 1.
        lt_objpack-head_num = 0.
        lt_objpack-body_start = 1.
        lt_objpack-body_num = l_att_lines.
        lt_objpack-doc_type = 'PDF'.
        lt_objpack-obj_name = 'attachment'.
        lt_objpack-obj_descr = 'payslip'.
        lt_objpack-doc_size = ( l_att_lines - 1 ) * 255 + strlen( lt_objbin ).
        append lt_objpack.
    make recipient list
       " check user_mail_id is not initial.
        lt_reclist-receiver =  user_mail_id.
        lt_reclist-rec_type = 'U'.
        append lt_reclist.
        call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
          exporting
            document_data              = lv_document_data
            put_in_outbox              = 'X'
            commit_work                = 'X'
          tables
            packing_list               = lt_objpack
            object_header              = lt_objhead
            contents_bin               = lt_objbin
          contents_txt               = lt_objtxt
            receivers                  = lt_reclist
          exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
        if sy-subrc = 0.
          write:/ 'Mail sent to', 30 user_mail_id.
          write : sy-uline.
        else.
          write:/ 'Error encountered'.
        endif.
        clear : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
        refresh : lt_objpack, lt_objhead, lt_objbin, lt_reclist.
       clear : filepath+3(17), pdffile, encryptpdf, batch_file.
        clear : out_tab, i_record, filetable.
        clear : user_mail_id, password.
      else.
        write : 'payslip not generated'.
      endif.
    end-of-selection.
    Please Check....

  • I'm getting error 5000 while trying to backup my phone before I can run an update

    I'm getting error 5000 while trying to backup my phone so I can run an update. I'm getting a message that says my back up is corrupt. What does that mean and how can I fix it?

    Hi
    This is an easy Q: to set - but there is no simple and plain answer only a lot of more or less plausibly suggestions.
    Error -50 = paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ?
    If so it Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk 11Gb is on the limit to work when You select Export and might be it.
    Video used - there are several video formats/codecs and iMovie can not use all of them, they evolve to fast.
    • So try to find out by opening a raw video in QuickTime-player and then open Inspector (cmd+I) and read
    Video Format/Codec: nnnnnnnn
    What does it read ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    I convert all audio to .aiff - in iTunes I burn out as an Audio-CD .aiff (not .mp3) and use the files on this in my movie projects.
    Some times it's needed to trash the "com.apple.iMovie.plist" file in You USER-Library/Preferences (not Library on Root level (when opening Macintosh HD) - but the one in Your home folder.
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • Payables Open Interface Import getting errors out

    Hello All,
    I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
    (Insert ap inv dists 1a) Inside the insert function
    (Insert ap inv dists 1) Insert into ap_invoice_distributions
    (Insert ap inv dists 1) Insert into ap_invoice_distributions
    ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
    Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
    (Create Lines 22) Insert into ap_invoice_distributions
    create_non_item_lines<-Import_invoices<- Before report trigger
    Any one faced this kind of issue?
    any suggestions to resolve this.
    Thanks & Regards
    Aboothahir

    Pl post details of OS, database and EBS versions.
    Pl see these MOS Docs
    Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
    APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
    Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
    HTH
    Srini

  • Xml report getting errored out

    hi friends
    i have one custom xml report with ten parameters whenever i submiteing concurrent program with mandatory paramas it will getting succesfully completed
    without requirement out put. Again whenever i submiteed program with mandatory params and non mandatory parameters it will getting errored out .
    the error was below
    Enter Password:
    MSG-01275: Date select AND afrm.certificate_date BETWEEN :P_FROM_DATE and :P_TO_DATE
    01-OCT-11 31-DEC-11
    REP-1276: Placeholder 'CP_PARENT_NAME' references one or more non-formula columns.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1276: Placeholder 'CP_PARENT_NAME' references one or more non-formula columns.
    thanks
    chandra

    Hi Chandra,
    There might be a problem with your .rdf.
    Please check the formula column and use srw.message functionality to debug.
    And please enable Trace option while you are running the report.
    So that you can get more info about the errors.

  • Getting error 3253 while downloading ios 6.1.3 on windows 7.

    I am getting error 3253 while downloading ios 6.1.3 on my windows 7. I am having version 11.0.2.26 of i-Tunes. I tried downloading manier times but not worth after downloading half of the size i lost my network connection and error -3253 pop up.  I also turned off windows firewall but nothing is worth. Prvious time when i was running with microsoft xp i just download internet explorer 8 and it fixed my problem, but i don't get solution for windows 7, Please help me out

    "Error 3000" through "3999"
    Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
    Hope it helps

  • "Failed to load excel file" an Error Message while running TDS upgrade util

    Dear All,
    "Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
    Please help me out on this!!!!!!!!!!!!
    Thanks..........

    Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
    Thanks,
    Gordon

  • Getting error message while defining Profit Center

    Dear Expert,
    Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
    If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
    Thanks in Advance
    Regards
    Krishna

    Dear Krishna,
    What is your B1 version and PL? Is it upgraded from an old one?
    Thanks,
    Gordon

  • Getting "error unknown" while downloading apps.

    Hey guys,
    I was downloading and updating apps when after the app says "waiting" i would get an unknown error. would ask constantly for a password when i hit retry. I have signed out through settings. and also reset the device after signing out. also this was done after filling out security questions through my ipad. thanks for the help.

    Rehan45786 wrote:
    After changing my password so many times, I m getting error message while downloading apps that my id has been disables.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi,
    Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

    The Current iOS for the iPhone 4s is iOS 7
    How to update your iPhone, iPad, or iPod touch

  • I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What

    I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What to do? Give up on CC?
    This is not the first time I get it, and it seems a recurring problem.

    Milliet are you on a managed network?  If not then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve error 205.

Maybe you are looking for