Disable (all) functions on the block diagram with right-click menu

Hello to everyone,
here is one more idea, which I'd like to propose.
As for me, it would be useful to have the following: when all components (functions, wires, subVIs, etc.) are selected on the block diagram (like, after ctrl+A), operator could do right-click, and in the menu would appear menu item "Disable everything". After it, all the code could be placed into Disable structure.
Of course, I can add Disable structure to block diagram manually, and cover whatever I want, but with right-click menu it would be much faster.
Also, it can be modified to disable only selected items - then each of them can be placed into separate Disable structure, and, for example, additionaly in the enabled case of Disable structure, corresponding wires will be connected. Sometimes it is needed for testing - just to disable couple functions, and test subVI. Or to disable subVI fully (it's faster, then disable place, where it is called. Especially, if subVI is used in many places).
It will not make debugging difficult, because anyway Disabled structures are used; such functionallity can just make life a little bit easier...

There is always the File->New... which opens up a new window. You can have your templates in that window by putting them somewhere (I don't remember where at the moment).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Help with right click menu!

Hello. I have a little problem with my right click menu and Firefox. When I right click a document and go to "open with" menu I get about 5 Firefox options along with other applications to open the file; how can I get rid of all this Firefox entries?? I guess they are there because of many Firefox updates from about 2 years but, it should be just one.

Do you have multiple versions of Firefox installed? If so, you either have to remove all but one or live with it.
If you have only one version of Firefox currently installed, rebuild your launch services database:
http://hints.macworld.com/article.php?story=20031215144430486

Left clicking mouse acts as if I'm right clicking, and comes up with right click menu?

Hi I was wondering whether anyone could help me with this, I've had this problem for a week or so now and it's beginning to get frustrating.
I have a newish iMac, bought in January, and I've been having this problem the last week or so, where when I left click something, it acts as if I am right clicking it and it comes up with the right click menu. I has happened mostly while on the internet (chrome), but also when I'm just on my desktop, but less often.
It only happens every so often, and rights itself after a couple of minutes. What could be causing this, and how do I stop it?
This is my first ever post on here, so I do apologise if I have been vague or I have posted this question in the wrong section, I am also new to macs (well since January).
The mouse I am using is a dell wired mouse, a couple of years old, which I just plugged in without the need of installing software etc.
Many thanks for any help in advance.

Hello & welcome!
No worries, you did great for a 1st post, & this is generally a friendly place.
It sounds light it's the Mouse button from here, to test it...
Go to System Preferences > Mouse, change the Primary button to the Right button... does the Right button ever do that now as the left button?

Need help with right click menu

I have recently upgraded my VLC video player to a new version. Now when I right click on a file to select "open with" I get VLC twice... quite annoying. Can I edit the right click menu and get rid of one of them?
Vignus

For an entry-by-entry method, try this:
http://www.macosxhints.com/article.php?story=20030730161311391
For a more direct approach, try:
http://lifehacker.com/308898/clean-up-finders-open-with-menu
Message was edited by: musicwind95

Issue with right-click menu after latest update

After updating Firefox, the right-click menu is showing much more commands than before (Play, Pause, Mute etc. etc.), most of them out of context ("Open Link in New Tab" when there is no link) and none of them working.

Issues with a massive right-click context menu have been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Convert word document to pdf in the same directory with right-click

Hi everybody,
With Adobe Reader X Standard, I want to convert word documents I have in a directory.
I do a right-click on a file, but when I try to convert the file I would like to save in the same directory (where the word document is). By default it suggest default documents location.
Thanks for your help.
Best regards,

Moved to https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs from Reader forum.
Note: There is no Adobe Reader Standard X program. There is Adobe Reader X or Adobe Acrobat Standard X. Reader cannot create pdf files, Acrobat Standard can. Please let us know exactly what software you are running together with OS.

I want the Programming pallet to appear whenever I right-click while in the block diagram

I want the Programming pallet to appear whenever I right-click while in the block diagram. Right now I have to look at the Express dialog, arrow down and then click on Programming. I want Programming to pop up first. This has to be dirt simple but for some reason I'm not seeing the solution in Help.
Solved!
Go to Solution.

go to tools...options...controls/functions palette...formatting
Select "Icons only" and "category(standard)".
Now right-click and pin the palette to get to the "customize" button. Select "Change visible palettes..." and click "select all".
see if this is better.
LabVIEW Champion . Do more with less code and in less time .

Putting a frame on the block diagram

Can I put a frame around a set of functions on the block diagram to visually separate them?
How?
Thanks

Under these 'structures' pallete, you will find the 'decorations' pallete. There is a frame, lines, etc.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Flash files with right click imported in dreamweaver files

Flash files created with Captivate which contain rightclick
functionality are imported to html files created in Dreamweaver. In
other words, I don't use the html created by Captivate but another
html file to build up a whole course. But now a couple of those
flash files contain a right click and obviously I have to adjust
the dreamweaver file with some of the script that William Heinz has
created. I am not an HTML expert and I am not 100% confident that I
can do with just endless try&error. Could anyone give me some
hints?
I suppose I need to use the second bit of William's article
"the more complex requirement".
When I insert the flash file this is what I get: (This is
where I am suppose to make the changes????)
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
Let
Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="746" height="591" vspace="5" title="Schedule Let Me">
<param name="movie" value="Resources/Sched_LM_skin.swf"
/>
<param name="quality" value="high" />
<embed src="Resources/Sched_LM_skin.swf" width="746"
height="591" vspace="5" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object></noscript>
I am not sure what to do with the "<Body
onload='javascript:init()..... "etc as suggested by William.
Thanks for any advice on this!!!

I hope there is one person out there who can help me with
this issue.
I have started from scratch and created a blank html with
dreamweaver and inserted the flash file (with right click
animation) created with Captivate.
Then I made the adjustments as per Heinz and also included a
ID=Captivate1 as the RightClick.js refers to that.
The main difference between this html file and the html file
created with Captivate, is that the Captivate one also has
writedocument bit.
Anyway, is there anybody in the world who can give me
atip/hint/suggestion?????

Why Is the Block Diagram Disabled?

What did I do now? Please look at the attached image. A VI that I am using as a subVI in various different programs suddenly started looking like I had used application builder to create an exe file out of it (But I didn't!!). The only options are Start and Run Continuously, and the block diagram is disabled. What did I do to get myself in this mess? How do I undo whatever I did, so I can edit the block diagram again? Any help or suggestions would be greatly appreciated.
Thanks!
Solved!
Go to Solution.
Attachments:
Disabled Block Diagram.png ‏259 KB

Did you ever built a source distribution with the option set to remove the diagrams? In this case, the original must still be around somewhere.
Since LabVIEW 8 you can no longer simply save without block diagram and you would not be able to upgrade such a VI to LabVIEW 2011, which it is now. (details)
Of course it is possible that there is some corruption, but looking at the memory usage, the block diagram is blanked out.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
NoBlockDiagram.png ‏38 KB

How can I open a vi and show the block diagram?

Hi,
I am opening an vi using "Open VI Reference" and "Invoke Methodpen FP", but I want to open the vi and show the block diagram, but I haven´t found any method (Invoke Method) to do that and any property.
Any idea?
Thanks!
Gracinda

OK, I can come up with a reason. I have written a program that will search the entire VI Hierarchy of a program and update all of the descriptions for all VIs with the top level program part #, the name of the top level program that the VI is used in, the company copyright info, the ITAR notice, company address, the name of the engineer performing the update, along with the date and time. This will also place as a background image on all the VIs, a watermark of the company name, legality stuff and the copyright. It works very slick in that if there are thousands of sub-vis, such as what I'm working on now, it goes through all of them, makes sure the data is there as per company policy without having to open every one of them look at them and update or not whichever the case may be. The one portion that is tough is that the program will detect if there is a description written about what funtion the VI performs and if there is not a description, then it pops up a dialog requesting the user to write a description. The problem is that without looking at the block diagram for the VI, it can be nearly impossible to write a description for the functionality of the VI. So is there a way to programmatically open a VI, show its block diagram (this would only be in the case of a missing description) and then upon completion of the updates, close the block diagram? (I already open and close the VI programmatically in order to read the VI DESC and update as needed, but that is in the background and of course you can't see the block diagram).
Thanks,
Dan

The Block diagram that cannot be edited...

The customer wanted to launch the application ( done in LV7 ) with a shortcut from the desktop and when done with it wanted to close all including the LV environment.
So I made the following changes :
1. Made the application to "Run on Open "
2. Connected the while loop Stop button to the "EXIT" function.
3. Saved and started the application.
Presto!! All worked as expected. Except that I no longer was be able to Edit the block diagram !!
Good - I had a copy of the code before the change and survived the nightmare ....
So the moral : Be very clear of what you are doing before you use the EXIT function.
Just though will share the experience, before somebody makes the fatal mistake as above.
( I have now ordered out my copy of the Application Builder, so that I can have my editable code well away from the customer's PC.)
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Here's another way to do it.
Create a directory in your LabVIEW x.x directory named 'wizard', and save the attached VI there. If LabVIEW is running, you'll need to restart it, but then in the 'File' menu, you'll have a new selection named "Supress Run on Open...". Select this and you'll get a browse dialog to select the VI to open. It opens it by reference so it will not run.
This is saved in LabVIEW 6.1, but works fine on 7.0 and 7.1.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Supress Run on Open.vi ‏18 KB

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

Red box Highlighting the entire work area of the Block diagram

I have a thin red box highlighting the entire work are of the block diagram...I've checked for breakpoints but dont see any. I run the code and after completion the entire work area turns black for a couple seconds and then the red box flashes and the continue button on the tool bar is hightlighted. Any assistance would be great
tks

This is indeed a breakpoint.
You should be able to clear it by selecting your breakpoint tool from the tools palette and clicking outside of your main code area.
When your breakpoint tool is going to set a breakpoint, the tool is filled in with black. When is is going to clear a breakpoint, it is not filled.
You can also search for breakpoints from the Edit menu Find function. Click the Select Object icon goto Others and select Breakpoint. This will find all your breakpoints. Sometimes they get set by mistake and you don't know it.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How to remove the simulation loop from the block diagram

hi,
i have used lap view version 8.6 to design pid system. i have the pid block diagram with daq on simulation loop. now my supervisor want me to remove the simulation loop. anyone know how to remove the simulation loop without deleting the pid block diagram. i have attached my pid program.
Attachments:
Copy of LAP VIEW FINAL for engine dyno.vi ‏221 KB

logaraj wrote:
hi,
i have used lap view ( ) version 8.6 to design pid system. i have the pid block diagram with daq on simulation loop. now my supervisor want me to remove the simulation loop. anyone know how to remove the simulation loop without deleting the pid block diagram. i have attached my pid program.
You cannot remove the simulation loop alone because all the functions kept inside that loop will work inside that loop only. If you have to remove means then you have to find another way to inplement the PID control.
The best solution is the one you find it by yourself

Disable (all) functions on the block diagram with right-click menu

Similar Messages

Maybe you are looking for