Disable BP Search Screen in IC based on CAD data

Hi,
We implementing CRM 7.0 IC, with CTI Genesys 7.5.1 (ICI 3.06).
I would like to know how to disable BP Search functionality in IC, based on the specific value for the Call Type from CTI (should be passed in the CAD data).
For all other Call Types the BP Search screen should search for a BP in the Identification screen.
In the ICI 3.06 Interface specification document, Pages 30-31, 4.3.3 Item Attached Data i could not find this information.
Thank you,
Vadim.

Hi Vadim,
This requires enhancing the CRMCMP_BPIDENT/CuCoIdentification component. in PROCESS_INCOMING_REQUEST method, check for your CAD values and skip the search when the values are present.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Similar Messages

  • Have recently installed AVG Free 2012, then received a Firefox update stating that Firefox 7.0.1 was not compatible with AVG and would be disabled; my AVG screen says I am up to date and protected. Which is correct?

    In the last couple of days, I received an update of the Free AVG 2012 program for virus protection. Saturday morning when my husband booted up and checked e-mail, he first received an update from Firefox which then alerted him that my computer was now not compatible with AVG, AVG would be turned off; should Firefox search for another compatible program? Having no clue, he clicked NO. When I check the AVG icon in the system tray, it shows AVG2012 up to date and running. The appropriate boxes are checked ok. How do I know what is accurate at this point? Is AVG disabled or not?

    Solution: (Free Download Manager)
    Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
    Solution: (to Google mail aka Gmail)
    I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
    And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software.

  • How to disable T410s touch SCREEN under windows XP?

    Hi,
    For the life of me i can't figure out how to disable the touch SCREEN (not to be confused with the touch PAD) - can someone please advise?  I'm running Windows XP SP3.  I've searched all the configuration settings I could think to check, google, these forums, etc.
    Thanks in advance.

    hey rreist,
    the T410s does not have a touchscreen. are you referring to a different unit ?
    do provide the MTM [machine type model]:
    To locate MTM -
    http://support.lenovo.com/en_US/FindProductNumber.page#find
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Is there a way to selectively disable "quick search" on specific websites (i.e. those which use javascript-driven keyboard shortcuts)

    Some websites use javascript (or differently) driven keyboard shortcuts - for example some google services or the tinytiny-rss feed reader. On those sites users normally don't use the "quick search" function, but it tends to get in the way of the keyboard shortcuts which tend to be pretty useful.
    So, is there a way selectively disable quick-search on some websites? Maybe there is a Addon for this?
    Thanks in advance, Kind Regards
    - NebuK

    1.SmartyPanouZe3rd,
    Sep 4, 2013 1:03 PM   in reply to SmartyPanouZe3rd
    This is a follow-up to the above question I had.
    Since i noticed people looking at the question, but no replies showing up, i contacted BC support directly with the same question.
    I got a reply.
    I did tests based on the reply.
    Here is what is going on based on the reply.
    (spoiler alert : It works... but it's not yet a perfect score.)
    All the details are posted here :
    http://www.animavdo.com/mut/ambiguity-001.html
    Hope this can help others.
    Cheers.
    PS  I still will use DW for the heavy lifting...
           But MUSE is nice for quickly putting together a mini website.
           Highly recommended App.

  • Fill Find edit box of Formatted search screen

    Hi,
    I have an edit box and a choose button.
    when I click on that choose button I get a formatted search screen.
    I want the value typed in the edit box to be defaulted in the
    Find Edit box of the foratted search screen.
    Say I type "1" in my edit box, My formatted search screen should pop up having "1"
    in the Find edit box and results pertaining to value "1"(like wild card search)
    should be displayed in the formatteed search screen.
    Can anyone tell me as how to implement this?

    The reference to $[x.0.0] was simply meant to point you towards using the formatted search syntax for selecting fields from the current screen for use in your query.
    The two techniques I mentioned were not meant to be used together, you could either use the sendkeys, or the $[x.0.0] syntax depending on which result you wanted.
    The $[x.0.0] syntax actually goes in the query that is saved for the formatted search, you don't need to do anything with it programatically at runtime, business one does it for you.  You can get a formatted search to pick values up from the current screen by using syntax such as $[$4.0.0] or $[$OINV.CARDCODE]. This particular example will pick up the cardcode from a document screen.  Look in the standard help file under Formatted Searches for more details.
    I have attached a sample query showing how it can be used with fields based on userdatasources in custom screens.  This one can be used to show product lookups out when the user has already keyed in a partial product code.  At runtime the $[#018.UItem] reference automatically gets replaced with the value currently in the item field.
    DECLARE @Item Varchar(20)
    SET @Item = RTRIM($[#018.UItem]) + '%'
    SELECT T0.ItemCode, T0.ItemName FROM OITM T0 WHERE T0.ItemCode LIKE @Item FOR BROWSE
    If you haven't seen this type of formatted search processing before, I would recommend you try to spend a little time learning it - it sometimes eliminates the need for writing SDK code at all.
    Regards,
    John.

  • ADF Edit Screen from Search Screen

    Hi All,
    I have developed a search screen based on ADF tutorial which is linked to edit screen. When I select the radio button and click edit button I see the edit screen but it always shows the first record in the search screen even if I am not selecting it. Is there some kind of tweaking I got to do for this?. Please help.
    Thanks

    You need to use the same VO for both the list of records and the edit form.
    Or you can use two separate VO's but then you need to synch the record that will be shown in the second view.
    The second approached is shown in this tutorial:
    http://www.oracle.com/technology/obe/ADFBC_tutorial_1013/10131/index.htm
    (note the use of the setActionListener to pass the param to the other page).

  • Not able to display and search on CLOB attribute in default search screen

    Hi,
    My requirement:
    I have three VARCHAR attributes and 1 CLOB attribute. i need to search the values on these 4 attributes.
    Created View crieteria on these 4 attributes and created default ADF search screen. but not able to add the CLOB attribute as search attribute.
    is there any solution for this or we can't search on CLOB attribute.
    FYI: i have created Converter using ClobDomain and and using this converted for editing the CLOB data.
    If i try adding the CLOB attribute in view criteria with ClobDomain and not able to see that attribute on search panel.
    Please help on this.
    Thanks in advance!!
    Thanks & Reagrds,
    Madhu

    Madhu, please tell us your jdev version!
    The search is done on the DB (query) so the converter is not used. To search clob columns you can use special SQL statements called contains or catsearch. These are using special index to find the data in blob or clob columns.
    Check my blog on how to integrate this into VC: http://tompeez.wordpress.com/2011/08/21/extending-viewcriteria-to-use-sql-contains-4/
    Timo

  • Required values should be displayed in forst search screen for Variable

    HI Gurus
    I have a Variable CUSTOMER which has 20000 values. In the first search screen we are getting 1 to 1000 values by default ( I have selected 1000 in properties). But I want the Values between 6000 to 7000. Is it possible?
    Thanks in advance.
    Best Regards
    Raj

    Hi
    I want to give single value in between 6000 to 7000. The single values which appear in first search should not be 1 to 1000. It must be 6000 to 7000
    Thanks
    Raju

  • Why is it that when I go to the search screen to find a particular message in a conversation it comes up with the message but when I click on it it takes me to the conversation where the most recent message was sent and not the message I wanted

    Why is it that when I go to the search screen and type in a particular message I want to view, my iPhone finds it but when I click on it it only takes me to the conversation at the most recently thing texted and not the particular message I clicked on?

    Never occurred to me you can search messages that way, thanks.
    Another way to do it is to scroll from the most recent message to the top of the screen and tap load more messages, repeatedly till you reach the one you want.
      I like your method better, but with both methods it refreshes to the most recent message.

  • How to change the default operators in sap web ui Search screen?

    How to change the default operators in sap web ui Search screen?
    For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
    I need only "equals" operator. How do i remove the rest of the operators?

    There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
    Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
    Regards,
    Harshit

  • With input disabled field search help is not working.

    Hi Web dynpro abap Gurus
    Please help me on below requirement.
    If i make a input field disable then the attach search help is not working. Is there is any way by which
    I can make input field disabled and search help will also work for this field.
    I really need help on this, Please help me.
    Many thanks in advance.
    Sandeep Sharma
    09971995045

    Hi
    I dont think that a field can be disabled and allows to choose data using f4 simultaneously. you can enable the field and allow the user to select whatever he/she wants.
    Then in any action like on press of save or submit button which the user will trigger after entering the values, get the value entered by the user in that perticular field and fire a query on the table/view, which you have used as selection method of your search help, it help is coming from data element then look for check table in domain. if sy-subrc comes 0 than go ahead else give error that value selected is modified.
    Thanks
    Vishal

  • How do I disable the welcome screen in iCloud

    This may seem like a simple question but every time I attempt to access my iCloud account, I get the Welcome screen asking me if I want to activate Find Your device (whatever device I'm using) and if I want to activate Find my Friends (NO) etc.  Half the time I don't even know what the correct address is for iPad and get all kinds of other websites and I just give up.  Now I'm in a CRITICAL SITUATION in which I've gotten a Time Machine message that my WD Drive is no longer backing up and must be reformatted immediatly  - YIKES!  As you all can see I am very frustrated - I am still in the process of restoring data I lost from a hard drive failure in JUNE 2011 LOL How do I disable the Welcome screen in iCloud?  What exactly is the correct web address?  Sounds like a question for Watson.  I know others have had a similar problem with WD external drives; can I recover enough data to get me back up and running?  All my Time Machine back ups are on that drive. Awhile ago I bought Carbon Copy; it is apparently not functioning as it should (again back up on that drive) because I did the upgrade prior to getting the data off the WD drive, it installed a Trial Carbon Copy and is now asking me to reinstall what is sees as new software thus the last disc image is "lost.  HELP PLEASE

    Where are you trying to access your iCloud account, and from what device?
    If you are trying to access your iCloud account at http://www.icloud.com/ from an iOS device, you can't. The iCloud.com website is not designed to be accessed from iOS devices - access it on your Mac.
    Your Time Machine and WD external backups and Carbon Copy backups are nothing to do with iCloud, so I don't know what you think accessing iCloud will achieve in your situation anyay.

  • Issue with programmatically created LOV on Advanced Search Screen in OCO.

    Hi All,
    I am trying to create a LOV programmatically on Advanced search screen of Oracle Customer's Online module for the country field present there, i have extended a controller and
    in it i am carrying out the creation for this.
    i am using the below code to do this.
    i am able to access the particular rowlayout bean and code below is starting after that.
    OARowLayoutBean CountryRowLayoutBean =
                            (OARowLayoutBean)RgtColTableLayoutBean.getIndexedChild(8);
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "CountryRowLayoutBean: " +
                                                         CountryRowLayoutBean,
                                                         PROCEDURE);
                        int CountryRowLytChldCount =
                            CountryRowLayoutBean.getIndexedChildCount();
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "CountryRowLytChldCount : " +
                                                         CountryRowLytChldCount,
                                                         PROCEDURE);
                        OAMessageTextInputBean CountryMsgTxt =
                            (OAMessageTextInputBean)CountryRowLayoutBean.getIndexedChild(2);
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "CountryMsgTxt : " +
                                                         CountryMsgTxt,
                                                         PROCEDURE);
                        CountryMsgTxt.setRendered(false);
                        OAMessageLovInputBean CountryLOV =
                            (OAMessageLovInputBean)createWebBean(pageContext,
                                                                 LOV_TEXT, null,
                                                                 MatchRuleAttrId); //MatchRuleAttrId - the fields are rendered through DQM so, this is the Id for the text input , same is taken as id for LOV, to enable search later.
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "CountryLOV : " + CountryLOV,
                                                         PROCEDURE);
                        CountryRowLayoutBean.addIndexedChild(CountryLOV);
                        Integer webBeanRegionAppId =
                            (Integer)webBean.getAttributeValue(REGION_APPLICATION_ID);
                        CountryLOV.setAttributeValue(REGION_APPLICATION_ID,
                                                        webBeanRegionAppId);
                        // Specify the path to the base page.
                        CountryLOV.setAttributeValue(REGION_CODE,
                                                        "/oracle/apps/imc/ocong/search/webui/ImcSearchPage");
                                  CountryLOV.setAttributeValue(LOV_REGION_APPLICATION_ID,
                                                        webBeanRegionAppId);
                        // Specify the LOV region definition.
                        CountryLOV.setLovRegion("/oracle/apps/ar/hz/address/webui/HzCountryLOV",
                                                   webBeanRegionAppId.intValue()); //Standard LOV region used
                        // Validation should be enabled for LOVs unless it's essential for the field to allow a partial value (in a "Search" region, for example).
                        CountryLOV.setUnvalidated(false);
                        CountryLOV.setAttributeValue(SELECTIVE_SEARCH_CRITERIA,
                                                        true);
                        CountryLOV.setAttributeValue(SEARCH, true);
                        // Configure the LOV mappings.
                        // Note that you must call this method after you add the messageLovInput item
                        // to the web bean hierarchy.
                        // base page item
                        // lov item
                        // direction
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "webBeanRegionAppId : " +
                                                         webBeanRegionAppId,
                                                         PROCEDURE);
                        if (pageContext.isLoggingEnabled(PROCEDURE))
                            pageContext.writeDiagnostics(this,
                                                         "MatchRuleAttrId : " +
                                                         MatchRuleAttrId,
                                                         PROCEDURE);
                        CountryLOV.addLovRelations(pageContext,
                                                      MatchRuleAttrId,
                                                      "TerritoryShortName",
                                                      LOV_RESULT,
                                                      LOV_REQUIRED_NO); // base page item
                        // lov item
                        // direction
                        CountryLOV.addLovRelations(pageContext,
                                                      MatchRuleAttrId,
                                                      "TerritoryShortName",
                                                      LOV_CRITERIA,
                                                      LOV_REQUIRED_NO);
    I am facing the issue that the torch icon is visble on the screen but when i click on it, it does not display the LOV region and a blank page saying website declined to show the page is displayed.
    Please suggest what needs to be added that i am missing right now.
    Thanks,
    Mayank

    on the first option I mean you can add new region  programaticaly like this on Processrequest
                OAStackLayoutBean newLocationLovs=
                    (OAStackLayoutBean)createWebBean(pageContext
                                                        ,"/yandex/oracle/apps/csi/instance/location/webui/YaLocationLovsRN"
                                                        , "xxnewLocationLovs"
                                                        ,true);
                  webBean.addIndexedChild(newLocationLovs);   

  • How to disable the FULL SCREEN option in the 'Insert Video and Audio' option

    Hi,
    I've been inserting some MP3's and using an image for pupils to click on to play the sound, the images are 100 pixels by 100 pixels.
    The only issue is that I have the grey rectangle 'Full Screen' box over the picture. This is ideal when I put videos on but not necessary when you have just an MP3. Also I've noticed that the 'Styles' option is greyed out and due to that I can't change the
    colour of the play button.
    I've been inserting MP3's direct from my PC hard drive to the webpage.
    Any help'd be greatly appreciated.

    Hi,
    Per my understanding, you might want to disable the “Full Screen” button and make other customization when there is an audio file in the page.
    By default, when we insert an audio/video file into page via “Insert Video and Audio” button in the ribbon, an OOTB Media Web Part will be added into the page contains
    the file you added, the “Full Screen” button is a part of this Media Web Part.
    In consideration of you might have other requirements on designing the style, I would suggest you create a custom Media Web Part instead which will enable you customize
    the style as you want.
    About creating a custom Media Web Part, you can use the <audio> tag:
    http://www.w3schools.com/html/html5_audio.asp
    http://www.catswhocode.com/blog/mastering-the-html5-audio-property
    http://www.elated.com/articles/html5-audio/
    There are also other powerful JavaScript audio plugins:
    http://kolber.github.io/audiojs/
    http://jplayer.org/
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    I have an ipod touch 8gb that is disabled. on the screen it reads ipod disabled connect to itunes. But when i connect it to itunes, it says that it cant work with the ipod because it is locked with a passcode. what now?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    The previous responses did not say how to place in recovery mode or DFU mode

Maybe you are looking for