Disable message alert on recipt of Delivey Report ...

Friends,
I am getting a Message Alert tone on every Delivery report, someone help me on disabling this. This is annoying and I am using E72 with frimware v91.004

Have a look here ...

Similar Messages

How To Disable Verify Database Message Alert

How To Disable Verify Database Message Alert?
I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to disabled this alert or set default to "Ok" so I do not have to click this message every report. Thank you very much.

Hello,
You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
Also:
Dim CRApplication As CRAXDDRT.Application
Dim Report As CRAXDDRT.Report
Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
Use:
Dim CRApplication As CRAXDRT.Application
Dim Report As CRAXDRT.Report
The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
Link to Single Case purchase:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Thank you
Don

How to disable the alert message that comes in older browsers while loading

Hi!
I'm testing the ADF Rich faces app on Firefox 2.0.01.
It's working fine, but still I get the Error "" You are using unsupported Gecko Browser,the Supported Gecko browsers are 2.0.02 and higher".
I don't want that message to be displayed to the user, though he may be using older browsers..
I Suppose the application developer can handle it according to the demands of the of the situation...
Can you suggest a way to disable that alert message which is very annoying to the user , every time a page is loaded ?
Thanking you in advance,
Samba

I filed your complaint as an ER. For tracking purposes the ER number is 6160631.
--RiC

Disable Email Alerts in Vibrate Mode?

Hi. Is this possible? I've searched various forums and haven't come up with anything...
I've disabled all my messages alerts:
> Volume - Silent
> LED - Off
> Vibration - Off ... And I also tried Vibration - Custom, In Holster Only
Everything works fine when I have normal ringing enabled - no email or other messages alerts. However if I go to vibrate mode, I get a double vibrate alert for every email, in or out of the holster...
Can this be turned off?
Thanks in advance.

You, I assume, have gone into the Sound Profile Options and set custom profiles for each of your email addresses. That should be available on your Tour.
Although I have a Storm 9530 you should have much the same alert options. I willl admit it took some small degree of tinkering with the options combinations before I got it to work as I wanted. I set custom profiles but when I want NO notification either vibrate or or tone, I turn the tone to Silent and LED and Vibration to Off and it works.
Set Ring TonesAlerts>Messages>(email listings) options to set by email address you have established the Ringtone/Volume, LED, Vibration and Notification options and you still get vibrations although you have set to either off totally or a lower count?
I have customized all four of my email addresses as to ringtone, LED and vibration profiles and can override the ringtone by opting for sounds off except for calls which takes precedence over the ringtone setting. All other customization works flawlessly.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

Request to have an option to disable message editi...

I really hate it when people abuse the edit function by editing their questions after you asked them, deleting things et cetera. It causes a lot of frustration and anger among other people in the group when people abuse this option. I would really appreciate it if there was an option where you could disable message editing (or atleast not further than the last message posted) within a group.

Hi, Danwgaward, and welcome to the Community,
Please see this thread, particularly the post by Claudius:
http://community.skype.com/t5/Windows-desktop-client/Creator-but-no-rights/m-p/1489519#M125909
Regards,
Elaihne
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Message alert pop-up

Can the main screen message alert pop-up be disabled??

In a word, no.
You can disable the message preview, but not the pop-up entirely.

Disable Popup Alerts While Writing Text or Email?

Is there any way to disable the annoying alerts that pop up while you're in the middle of writing an email or a text? I'll be right in the middle of typing something and the alert will pop up; next thing I know I've hit the alert with my thumb and {{ whoosh }} off I go into some completely other place. It's so freaking annoying! But I don't want to disable the alerts all together--only while I'm typing. Alerts are the only way I know if I received a message since the iPhone has no blinking light or other reminder. Anyone else annoyed by this? Any known fixes/workarounds/solutions out there?

They're email alerts. When I'm typing a text message or email and I receive a text or an email, the alert for that text or email pops up right in the middle of my screen while I'm typing (see picture) so I accidentally hit the alert and either hit "Close" or "Options" by accident. If I hit "Options," I've sometimes accidentally hit "Trash" and then I have no idea what the alert was even for. I use my iPhone for business and I've lost opportunities because I've accidentally trashed things.
Surely I can't be the only person this is happening to.

HT1414 my ipad is showing a disabled message and a numeric keypad. Help!

My Ipad two is displaying a disabled message and a numeric keypad. I dont recall a numeric code for it. Can someone help me get it working properly again?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How to disable the button in application toolbar in report pgm

Can anyone help with How to disable the button in application toolbar in report pgm

Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka.

Message alert when deleting emails

When I delete an email on my laptop my iPhone 5c makes an alert sound I assume to move the email to trash. Is there a way to stop this alert when deleting messages?

Hi,
If we delete the sheet manually, we can't disable the alert message box.
If we use macro to delete the sheet, we can disable it. Please see the sample code:
Sub test1()
Application.DisplayAlerts = False
Sheet4.Delete
End Sub
More reference:
http://msdn.microsoft.com/en-us/library/office/ff839782(v=office.15).aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can I disable the alert "the referenced account is currently locked out..."

I posted the following on the answers site but was recommended to post here
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/can-i-disable-the-alert-the-referenced-account-is/0af4441c-2f70-4452-a876-7c582fbd6530
A client has asked me to enable an account lockout threshold on their domain.
I have made the appropriate changes in Group Policy and also configured an email notification under Task Scheduler that is triggered by Event ID 4740 appearing in the security log. http://community.spiceworks.com/scripts/show/1588-send-email-on-account-lock-out
It was when testing this that I noted after the nth incorrect password, I received an on screen alert "the referenced account is currently locked out and cannot be logged on to"
I tested again with an invalid username and did not get the same message. This is potentially a problem because it means that an attacker sees a difference between a valid username and an invalid username without being required to know any correct
passwords.
Is there any way that I can disable this on screen alert so that attackers are not presented with a means to validate usernames?
I am already aware that account lockouts are no longer in favour for other reasons and have informed the client about the possibility of a denial of service attack that deliberately triggers these lockouts and taken certain steps to mitigate the
effects.
However, given that an informed decision has been made to stick with the account lockout policy I would like to be able to mitigate this other undesired consequence if at all possible.

Hi Matt,
I understand your concern, although I wasn’t able to find a way to disable or change these embedded Windows messages.
With Account Lockout policy enabled, the risk that accounts being hacked has been reduced a lot. In addition, we can monitor security logs to determine whether hacking behaviors exist or not.
More information for you:
Audit Policy Recommendations
http://technet.microsoft.com/en-us/library/dn487457.aspx
Configuring Audit Policies
http://technet.microsoft.com/en-us/library/dd277403.aspx
Best Regards,
Amy

TS4006 What can you do if you sent a message, alert and lock mode already on your lost ipod but it doesn't recieve????

What can you do if you sent a message, alert and lock mode already on your lost ipod but it doesn't recieve???? What else can I do??? I already reported it and also have the find my iPhone app. Anyways how do the police locate an iPod and does warranty cover a lost ipod or can it replace it????

You would have to ask the Police how they can find your iPod, if it's even possible. Your warranty with Apple covers defects in materials and workmanship, not loss.

Text message alert- turn off or modify

In spite of some other comments on this topic, it is not easy to find how to modify the text message alert in the E71 manual. I have been awakened several times by amber alerts during the night. When I tried to find how to turn off the message alert in the manual, I could not find it. I emailed Nokia and the following (modified a little) is what I received:
To turn off or change text message alert tone:
In response to your concern, we would like to inform you that you can change the message alert tone of your device.
Please refer below for the steps:
1. Select Menu
2. Select Tools
3. Select Profiles and to change the message tone
4. Select current profile if not already selected
5. Select Options
5. Select Personalise
6. Select Message alert tone (page to off or vibrate if preferred)
Problem solved! I hope this helps some of you having the same problem.

I think this is what you are looking for.
http://www.wireless.att.com/cell-phone-service/services/services-list.jsp?catId= cat320008&LOSGId=&catName=Parental+Controls

Text message alert sound

I have a new LG Revere. When I receive a text message, the phone makes some sort of alert vocal sound. I can set the text message alert ring tone, but how do I turn off that alert vocal sound?

This question, and another regarding a "voice" or "vocal" alert, leads me to believe you have Voice commands enabled. I'm not sure where this is on the Menu system for the Revere - explore Menu, Tools, Sounds, Voice Commands, Alerts - see if there is a setting for those to be toggled on or off. You may also look in your user manual for those keywords to see if there is anything there that will lead to a way to turn these off.
** Update - Page 65 of the user manual has info on the Voice Commands and turning the prompts to Readout/Readout + Alerts/Tones only I think you want tones only....
http://cache.vzw.com/multimedia/mim/lg_revere/revere.pdf

How to Customize the Message "No Row Returned" from a Report

Hi,
I've been trying to customize the Message "No Row Returned" from a Report.
First i followed the instructions in Note:183131.1 -
How to Customize the Message "No Row Returned" from a Report
But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
So i followed the "fix" in the document above and now my output is,..
"Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
So i search in Metalink for the above and come up with,...
Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

Disable message alert on recipt of Delivey Report ...

Similar Messages

Maybe you are looking for