Disable password expiration for a sap R/3 user

Hi, in our parameters
we have a login/password_expiration_time parameter = 45 days (Sap rel. 45B).
Is there a way to disable the password expiration only for one or some users ?
Thanks in advance.
Best Regards.
Riccardo Galli

Hi Riccardo!
Not by system settings, that are just general parameters (and for security reasons, that's good in this way!).
But if you like to experiment a little bit, start with a change of the value in USR02-PWDCHGDATE for your user (by DB-table update).
Regards,
Christian

Similar Messages

  • How to disable password expiration for the administrator?

    Hello
    is it possible to disable the password expiration for the administrator? For all other users the password should expire after 90 days but not for user administrator.
    How would this look like with LDAP integration? I assume that user administrator is not replicated to LDAP and exists only in the local UME database, thus it would work like without LDAP. Or is my assumption wrong?
    Thank you in advance for your answers.
    Best Regards
    WB

    Hello Harikiran,
    thanks for your answer.
    Yes I found the setting in VA:
    Global Configuration > server > services > UME provider >
    ume.logon.security_policy.password_expire_days
    or in Configtool:
    Global Server Configuration > services > com.sap.security.core.ume.service >
    ume.logon.security_policy.password_expire_days
    But for me it sounds that this will apply then for all users that are managed in UME, not only for the administrator. Are you sure that this is only for the administrator?
    What is with the users database table in WEB AS Java? Does somebody know the name of this table?
    Regards
    WB

  • Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

    Dear all,
    I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
    I know there are 3 options for digital signature and
    System signature with authorization by user ID and password (We use this currently)
    Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
    User signature without verification
    Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
    I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
    My active directory is based on Windows 2008.
    Thanks in advance!!
    Dhee

    Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

  • "user password expiration" for every 30 days for the NW2004S systems

    Dear all,
    We are using NW2004s with BI and DI,EP. We set the parameter "user password expiration" for every 30 days for the NW2004S systems(dual stack).
    In  the system  users SAPJSF,NWDI_CMSADM,J2EE_ADMIN,NWDI_ADM, ADMINITRATOR is also getting change once in every month(30 days),So that we need to change the password and it should get update in the visual admin and config tools. Some time this arising problem. Is there any way to avoid the password expire for this particular user in the system .
    Note :Password expire parameter should keep compulsory  in the system
    So Please guide us to resolve those problem.
    Thanks in advance
    Regards
    Lakshminarayanan M

    Hi!
    I don't suggest you to change J2EE_ADMIN password. instead you should logon with your user.
    Anyway.... please find below a small program to control passwords validity. for some users is very usefull.
    REPORT  ZS_ALTERA_DATA_PASS                     .
    tables:usr02.
    select-options : s_users for usr02-bname.
    parameter:       p_data  like usr02-bcda1 default sy-datum.
    update usr02 set bcda1 = p_data
                 where bname in s_users.
    if sy-subrc eq 0.
    MESSAGE 'Password validity changed' type 'S'.
    else.
    MESSAGE 'ERROR changing password validity' type 'E'.
    endif.
    cheers

  • How to set password expiration for EBS users

    how to set password expiration for EBS users .
    Regards .

    Please follow below steps:-
    This is available starting in RUP4.
    The script to expire all passwords in the fnd_user table is $FND_TOP/patch/115/sql/AFCPEXPIRE.sql.
    It can be executed from SQL*Plus or as a Concurrent Program: sqlplus -s APPS/ @AFCPEXPIRE.sql
    or Submit concurrent request: CP SQL*Plus Expire FND_USER Passwords
    This script sets the fnd_user.password_date to null for all users which causes all user passwords to expire.The user will need to create a new password upon the next login.
    Thanks,
    JD

  • ISE password expiration for Admin account issue

    OK .. we have been working on getting ISE up and running for a little while now and I have come across an odd and reoccurring issue with my admin accounts. I cannot figure out if there is something that we have missed in the setup or if there is and actual issue with the password policies. It seems that there is a "user" type password policy and then there is an "admin" type policy and am trying ti figure out if they are stepping on each other or something. I am running version 1.2.0.899 with patch 5,1.
    Here is the issue. I have started receiving password expiration reminders for the two admin accounts I have setup on the cluster. I have my address setup for an admin user named "admin" and an admin user named "wberry" and I receive two different e-mails for both accounts. The issue that I have is the dates listed in the e-mails. This is one e-mail that I get:
    The password for your local admin "wberry" is expiring on Mon Jun 01 09:43:03 CDT 2015. Please update immediately, by going to https://mem7700.spd.mli.corp/admin, signing-in, and clicking on the user name at the upper right corner.
    This is the second email that I get for the same account:
    Your network access password will expire on Thu Dec 03 08:43:03 CST 2015. Please contact your system administrator for assistance .
    As you can see the dates in the two messages are completely different. My admin policy is set with expired 180 days after creation and last change and the reminder is set to 10 days prior to expiration. The user password policy lifetime is also 365 days if password not changed with the reminder after 355 days. 
    Thoughts / recommendations.
    Brent

    Here you go:
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/4.1/user/guide/UG_over.html#wp1053919
    In fact, to reset the password, you must choose the change password option before you login the GUI.
    Cheers,
    Dom.

  • How to disable password protection for Onenote 2013

    I have been trying for a while to disable the ability for users to password protect a section in Onenote 2013.
    I need to have access to all users onenote notebooks within the organization.
    I have tried HKCU\Software\Microsoft\Office\15.0\OneNote\General\PasswordProtectionDisabled = 1 and it didn't work.
    I tried the above solution on the 2010 version and it worked, but instead of it being 15.0 it was 14.0.
    I would greatly appreciate any kind of help.

    Hi,
    Thank you for the reply.
    I would appreciate you could try following the following steps:
    Download ADMX Template for Office 2013:
    >>>There will be a folder named ADMX created with (ADM, admin, admx, exe, .xls & .xlsx files)
    >>>Open admx >>>Copy all the admx files
    >>>Go to C:\Windows\PolicyDefinitions ----Paste all the admx files;
    >>>Come back to ADMX/admx folder/en-us/Copy all .adml files---Paste it in C:\Windows\PolicyDefinitions\en-US
    >>>In run command Type "gpedit.msc"
     gpedit.msc->User configuration->Administrative Templates->Microsoft OneNote 2013->Password >>>Do the necessary changes.
    Once done with above changes, then go to below location & make the necessary settings:
    HKCU\Software\Policies\Microsoft\Office\15.0\OneNote\General
    DWORD: PasswordProtectionDisabled
    Value: 1
    If you still need further assistance, you may need to open a case with Microsoft by either calling
    1-800-865-9408 or can open case online
    http://support.microsoft.com/select/default.aspx?target=assistance
    Thank you for contacting Microsoft Support.
    Have a great day ahead.
    Regards,
    Abhijeet

  • Disable password reset for developer users

    I want to disable the capability for developers to reset their passwords. Is there anyway to do that?

    Hi Eugene - What do you mean by "reset" ? Do you want to prevent developers from changing their password either from the current value to a new value, from the current value to the same value, or to prevent them from doing either? And why? What about the "Reset Password" feature on the login page? That actually performs what I'd call a reset.
    Scott

  • Default password "PASS" for username SAP* not accepted for new client

    I have created a new client, client 200 in my SAP system. I assigned it to a logical system properly and exist as one of the clients on the system together with the default clients "000", "001" and "066". The problem is that when i try connecting to this newly created client using the credentials Username: SAP*, Password: pass i get an error as follows:
    name or password is incorrect (repeat logon).
    I also tried the password that i use to connect to the default clients and i get the same error message. Please assist.

    Hi,
    Set parameter login/no_automatic_user_sapstar with value 0 in t-code: RZ10 then restart SAP system.
    User SAP* may get locked due to incorrect login attempts. So, delete SAP* record from database level.
    > sqlplus / as sysdba
    SQL> delete from sapsr3.usr02 where bname='SAP*' and mandt='<client number>';
    it should show 1 rowe deleted..then
    SQL> commit;
    Now system will allow you to login with user SAP* and password 'pass'
    With Regards,
    Renu

  • How to disable password policy for App ID's

    Hello there,
    We have Sun ONE Directory 5.2 Patch2 version running on Solaris 8 as Master on 2 servers. I have somany application id which is created under separate branch of the tree. I want to by-pass the password policy for all the id's under specific branch.
    Can someone please help me how to get this done. I appreciate anyone respnse.
    Thanks
    SS

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • Password Expire agrument while creating a new user

    When I create a user using the script:
    create user xxxx identified by yyy
    default tablespace -----
    temporary tablespace ----
    quota ---
    password expire;
    When the user logons for the first time, oracle throws a
    ORA-00988 error:
    missing or invalid password...
    My question is?
    On a UNIX system (I'm running on Window 2000 Professional)
    do you get the same error? Is this a misleading error message?
    Has anyone else seen this error message?
    Thank you in advance
    Mike Parish
    Toronto, Canada

    I found the answer:
    You must loging in sql/plus and typing alter user OWBSYS identified by password. The password depend on you, which name you will to them.
    Mehdi

  • How to disable password change for you logon first time.

    hi,
    When i change the password of any user or when i create new user and login with the same user it ask to change the password again can sap have provided to disable this feature where in user won't be ask to change password again.
    thanks,
    - John

    Hi,
    I'm not quite sure, but you can try with some of these profile parameters.
    Initial Password: Limited Validity
    <i>login/password_max_new_valid</i>   -  Validity period for the passwords of newly created users
    <i>login/password_max_reset_valid</i> - Validity period for reset passwords
    Svetlin

  • SAP Download Assistance for a SAP SD Certified User

    Dear Gurus,
    I am a SAP SD ECC 6.0 Certified Consultant, which I recently finished from Siemens, Bangalore-India
    with 82% Marks on 7th November 2008. my ID is S0005912932
    I am intensified SAP Aspirant. My problem is that, presently I am working with a company, which
    don't have SAP software solution installed, But I want to practice more and more and would like to
    clear the MM, WM,PP and IS retail by myself.
    It is my humble request to all of you that kindly do let me know, where I can get the downloads/Free
    CD through OSS/SAP Service market place of ERP 4.7 or 6.0, GUI downloads along with the Database
    Patches. I am also keen to make my home page here, but don't get the place where to do the same.
    I tried to download some of them, but It said I am not having authorization.
    Kindly pls assist me for this regard as well as I am looking for my career move in SAP, but
    unfortunately I am not getting any freshers entry in this corporate world. Pls tell me where I can
    get assistance this regard.
    MY ID is <<removed_by_moderator>>
    Regards,
    Abhishek
    Edited by: Vijay Babu Dudla on Feb 4, 2009 11:50 PM

    Hi,
    > I am a SAP SD ECC 6.0 Certified Consultant, which I recently finished from Siemens, Bangalore-India
    >with 82% Marks on 7th November 2008.
    I am sure that you will also be glad to know that on 6th October 1975, I got an 18 Mark (out of 20) in elementary calculus.
    Sorry, this is Coffee Corner, I could not resist !  
    By the way, I don't think that you have understood what this SAP SDN site is all about...
    Olivier

  • How to disable/set password expiration to None in EBS

    HI ,
    I just clone a 11i , and was asked to set all users password not to expire . I have studied FND_USER_PKG.UPDATEUSER , but has no idea how to do it . Can anyone help ? Thanks
    Felix

    Hi;
    Please check below which could be helpful for your issue:
    Password information-Where ebs pass keep
    Re: Password information
    password expiration for EBS users
    how to set password expiration for EBS users
    password polciy
    Password policy
    Regard
    Helios

  • How to disable password for mount partitions

    Hi.
    I want disable password Aunthenticate for mounting partitions.
    I searched in wiki and google. But nothing found.
    Thanks.

    And/or https://wiki.archlinux.org/index.php/Udisks
    What exactly did you search for?  How did you not find these (and other) results?  Or have you ruled these out?

Maybe you are looking for