Disable VZaccess Manager for Wi-Fi

Hi. Is there any way I can configure VZAccess Manager to not enable wi-fi? When we open up VZaccess Manager for the first time on each PC, it uses that for wi-fi and disables the program we do use for wi-fi. (We only use VZaccess Manager for WWAN Devices). Currently, we have to manually set the preferences on VZ Access Manager to not use wi-fi, but is there any way this can be automatically done? Like in a script or something?
Thanks,
Galit

In order for your Wi-Fi not to open you will have to disable it on your computer. It does not have anything to do with your VZaccess Manager, they are separate. Hope this helps!

Similar Messages

Verizon VZAccess Manager (for broadband modem) will not even Force Quit

When I wake my MacBook Pro and launch VZAccess Manager it often hangsand Force Quit will not work (I didn't know that was possible). The only way to shut down is to press and hold the power button.
With each successive release of 10.5 my USB 727 modem driven by the VZAccess software is getting more finicky. I'm now making sure to disconnect and quit VZAccess before the MacBook Pro Intel goes to sleep. Since 10.5.6 this happens multiple times per day. I'm using the latest available VZAccess software.
A workaround that I would like: before installing VZAccess I got the modem to work just using the OS X network panel (WWAN / Other / Verizon 1xEVDO Modem Script). But now I can't get that to work, even when I Uninstall VZAccess.
Does anyone know a way to undo the actions of VZAccess beyond what VZAccess Uninstall does? Does VZAccess overwrite the Verizon 1xEVDO Modem Script supplied by Apple, and fail restore it when using Uninstall?
BTW, I've not been able to send the error report to Apple, because I'm in a rural location and don't have another way to connect to the Internet to report.

Contact Verizon. The problem is likely with their software not staying compatible. If they cannot provide a newer version of their software that is compatible then all you can do is downgrade to a previous version of Leopard with which their software worked. You can do that as follows:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

VZAccess Manager for MiFi4510L?

I'm caught between a rock and a hard place. I can't get on My Verizon without them sending me a temp password in a text message. I have a MiFi4510L, not a phone. Customer Service says I need to use VZAccess Manager to be able to read the text message. I cannot find a version of VZAccess Manager that supports the 4510L.
Can anybody help?
Thanks.

Hi John_Getzke, your MiFi device is activated with a wireless number to use our network just like a wireless phone. You wouldn't have known that unless you have a order receipt or bill. You can find the wireless number assigned by doing the following:
• While on WiFi, open an internet browser and go to http://192.168.1.1
• Enter your password in the login field (default is the password found on the back of device under the battery cover ).
• Click Advanced > Diagnostics and look for Phone No.
When you say trial, are you one of the trial users from the Google IO conference? If so, those lines are activated under a demo account for the trial purpose and you won't be able to complete My Verizon registration for your own login.
If you are trialing during the 14 day return period, you can register once you follow the steps above to get your wireless number and go to www.verizonwireless.com/myverizon
Either way, you can still monitor your data usage by calling 800-922-0204 or download VZ Access Manager at www.vzam.net

VZAccess Manager install hangs looking for previous versions of software

UGH! Trying to install the VZAccess Manager for the UM175 USB modem. Driver installs but it gets to the point of the installation where the message box says "Checking for previous versions of VZAccess Manager..."
It just sits there and never goes away. FRUSTRATING!!!! The driver actually installs but the manager software never does. What gives?
Oh ya...Windows 7 is the OS

VZAccess Manager software must be installed before inserting the PC Card / USB Modem into the computer for the first time. Only after the software has been installed can Windows successfully install and configure the PC Card / USB Modem.
Start Device Manager.
Windows 7 Click Start > Control Panel > System and Security > Device Manager.
Click on the link below on using device manager.
http://support.vzw.com/clc/devices/knowledge_base.html?id=20416

My new HTC TB is not recognized by my VZAccess manager. What do I do?

I tethered my TB to my laptop to connect to the internet and it isn't recognized my my VZAccess Manager. I have the data plan for this and I put the phone in "Internet Connection Mode" but it still is not recognized. Am I supposed to download a new VZAccess Manager for the Thunderbolt? The version I have now worked fine with my LG Voyager for 3 years.
Right now I am connecting to my laptop using my Mobile Hotspot but I don't know if this is part of my business data plan(the $60/mo option) or not. I live out in the middle of nowhere California and do not have access to broadband, so this is my only form of connecting to the internet.

Well I found out why I couldn't connect to my VZAccess manager. It's because I was using the version for the 4G air card. According to the Verizon technician I spoke to, they haven't supported the TB with a VZAccess download yet, but they SHOULD have one up before the free wi-fi hotspot expires on 5/15.
The problem is, I am having trouble connecting with the hotspot, for instance it took me 60 seconds just to get to this page and I download stuff at 5-10kps a second while with my LG Voyager tethered I would download stuff at 20-80kps and 150+ when I was in LA or the Inland Empire. Even the phone browser keeps saying "Connection Failed" when surfing the web and the phone shows 2-3 bars. These are problems I never had with my Voyager and I know it's not my laptop since it connects fine with a hotspot from an AT&T phone, at Starbucks and the truck stop.
The technician I spoke with advised returning the phone until Verizon supports it with a VZAcces version for it. The thing is, will they waive the $35 restocking fee if I go back to my old phone and will I lose my upgrade for a future purchase? And if they do charge me the $35 restocking fee what will happen if I dispute the charge with my credit card company?

VZAccess Manager Linux?

Hello. I was just wondering if there a way to get VZAccess Manager on linux. I heard that they have a VZAccess Manager for linux under there Enterprise downloads. But i dont have a login there. Anyone help please? I'm trying to connect throught my mobile broadband with my EnV Touch. And i know linux has built in mobile broadband setup. but i want to use VZAccess Manager.

You really don't need VZAM in linux to use MBB. You can direct-dial a connection easily using PPP. The settings are as follows:
Phone #: #777
User:[email protected]
Pass:vzw
Example, if your device's # is 212-555-1234, the username would be [email protected]
Mind you this will just give you a connection, no usage info, network stats or signal meter.

The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

Hi All,
I am getting below error while inserting into Linked Server (sql2012) thru trigger from sql2008 ....However if i insert the same thru Store Procedure it is inserting successfully....MSDTC service is started on both sql server machines....also both machines
rebooted....but still i am facing this error.
OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure ins_test, Line 11
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" was unable to begin a distributed transaction.
Could assist to resolve.
Regards
Shehzad

Hi SHzKhan,
According to your error message, we need to verify if you configure the MSDTC correctly, When you have more than one SQL Server involved in a Distributed Transaction, you need to make some changes to the default configuration of MSDTC for these distributed
transactions to succeed. There is a detail about recommending MSDTC settings for using Distributed Transactions in SQL Server, you can review the following article.
http://support.microsoft.com/kb/2027550/en-us
There is a similar issue about error 7391, you can refer to the following link.
http://dba.stackexchange.com/questions/30235/msg-7391-distributed-transactions-dtc-on-sql-server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to Disable Group Manager Tab for Specific OU(Organizational Unit)

Hi All,
How can i disable Group Manager Tab for particular OU(Organizational Unit) in OAM 10.1.4.0.1? Where should i configure to disable this particular stuff?
Can someone please give suggestions on this issue?
Thanks,
Ganesh

Hi Ganesh,
If you have many OUs under the searchbase that you want to include, but one that you want to exclude, then you could add a filter to the Group Manager tab (in Identity System Console/Group Manager configuration/Tabs menu item) like:
(!(ou:dn:=mygroup))
where mygroup is the ou that you want to exclude
Depending on your ldap sctructure, it may be more appropriate to add searchbases that you want to include rather than use filters to exclude those that you don't want.
Regards,
Colin

Can I disable Creative Cloud App Manager for only 1 account on Mac?

My Mac has multiple, managed user accounts. The CC application manager is installed globally for all user accounts, and constantly phones in on those user accounts, including one that is managed and restricted. Is there any way to disable the CC application manager for just one of the user accounts so that I don't see the constant warnings about attempts to contact restricted sites?
Thanks.

Mac migration (or Time Machine) do not work with Cloud program activations due to hidden files
Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sign in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling may help
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Disable monitor in Operation Manager for 1 host

Hi,
I need to create a poweshell script that disable a monitor for a given host.
With the Disable-SCOMMonitor, I managed to disable it for a class, not an individual host. It looks feasable since you can disable it for a specific host of a class in the console.
So far I've got:
$Host = Read-Host "Enter computer name"
$MonitorName = "Total CPU Utilization Percentage"
$Monitors=Get-SCOMMonitor -ComputerName $strComputerName | where {$_.DisplayName -eq $MonitorName}
$MP = Get-SCOMManagementPack -DisplayName "BMA - Override - Orchestrator_Generated" | where {$_.Sealed -eq $False}
foreach ($Monitor in $Monitors) {
$Instance3 = Get-SCOMclass -name $Monitor.target.identifier.path | Get-SCOMClassInstance | where {$_.Path -eq $Host}
Disable-SCOMMonitor -Instance $Instance3 -ManagementPack $MP -Monitor $Monitor -Enforce
This does not return any error (besides when $Instance3 is empty, but that's an easy fix), but does not disable the monitor either...
I would appreciate some help to get that working :)
Thank you !

Hi,
I am a little confused, as you have the specified the monitor name as Total CPU Utilization Percentage, why are you still try to get an array of monitors?
If you want to disable one monitor for a computer, please try follow code, you may need to change some parameters according to your environment:
$Host = Read-Host "Enter computer name"
$MP = Get-SCOMManagementPack -DisplayName "BMA - Override - Orchestrator_Generated" | where {$_.Sealed -eq $False}
$Instance = Get-SCOMclass -displayname "The class name for the instance“| Get-SCOMClassInstance | where {$_.Path -eq $Host}
$Monitor = Get-SCOMMonitor -DisplayName "Total CPU Utilization Percentage"
Disable-SCOMMonitor -instance $Instance -ManagementPack $MP -Monitor $Monitor -Enforce
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

VZAccess Manager / no device detected / Windows 7

Tech note,
I was having problems getting VZAccess Manager to see my PC770 aircard on a brand new Dell laptop (Studio 1550). After reinstalling the software several times as well as speaking the Verizon tech support (no help there), I compared the Dell install with a laptop that was working.
I noticed that the dial connection for the modem was not being installed. After looking around I noticed that the Telephony service was not running on the Dell. As a matter of fact it was disabled.
So I enabled it, rebooted and reinstalled VZAccess Manager. If finally was able to detect the aircard.
Hope this helps someone.
Chris

/Re: "No audio device" in Windows 7 !? If you haven't give this a try,
http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-0-07-3-2009-AudigySE-Value-LS/td-p/53329
If that still doesn't work try to manually force the driver. This will only work (and not always) if the card is at least showing up in Device Manager; either by name, or as "unknown multimedia controller". First extract the above downloaded file, then open Device Manager and locate the card.
-right click on select update driver
-then select "browse my computer"
-next select "let me pick"
-next click on "have disk", then click on Browse and navigate to the "Drivers\vista" (or possibly Win7, not sure on this as I don't have the file) and point it to the P7. INF file.
that should get the driver to install. If it does then you should be able to re-run the above and get whatever apps from it you want installed.

HT201299 Not enable or disable cellular data for certain iOS apps and features from setting? I keep it off but when I go to other app it on automatic

I can't enable or disable cellular data for certain iOS apps and features from setting.
When I off data for specific application and go to other option it automatic on all application
Any one can help

SOLUTION! (NO NEED TO RESET YOUR IPHONE SETTING!)
I have the same issue for the last two weeks. But i have already managed to solve the issue all by myself. When i go to Settings > Cellular > below the tab "use cellular data for:", i turned off some apps which i didnt want to use with cellular data. As soon as i go back to Settings, and then i went back to Cellular, the apps which i had switched off earlier, automatically turned back on.
Here's the solution:
Either you're using wifi or cellular data, first of all you're gonna hafto turn on the cellular data use for App Store. Once you have turned it on, go to App Store application. Update ALL the apps which have new updates available. If it asks you to log in your App Store, just do so. If there's something wrong with your debit or credit card information, it will ask you to update to a different card. Just do what it asks. Put in a new credit or debit card info and fill in the forms provided. The card you're using must be usable and has usable balance in it. Let's say atleast $10 to $20. As soon as it confirms your card successfully, the app updates will start automatically. Continue to update all the apps. After all updates are finished, go back to Settings > Cellular. Try to switch on or off some apps for data use and recheck.
Try it yourself! Have a nice day and don't put a blame on Apple for this.
From Malaysia, with love.
Please hit LIKE button if this solve your issue. Thank you very much! (:

Steps to take if BlackBerry is not shown as connected in Desktop Manager for Mac

Hello Community,
Here is a list of steps you should attempt to try and get your BlackBerry detected in Desktop Manager for Mac.
1. Make sure you're using the most up to date BlackBerry Desktop Software for Mac. Which is available to download at http://www.blackberry.com/desktop
2. If using a MacBook/MacBook Pro make sure the BlackBerry is plugged in the left USB port close to the screen. If using a iMac make sure you use the USB ports on the Mac and not a USB hub.
3. Make sure you're using a BlackBerry branded USB cord. (There are usb cords out there for charging only).
4. Make sure mass storage mode is enabled on your BlackBerry smartphone. KB Article.
5. Disable Media Transport Protocol on your BlackBerry smartphone. (Options>Memory)
6. Make sure your Mac OS X 10.6 is running in 32-bit mode. KB Article.
7. Make sure ALL other syncing software has been uninstalled and removed off your Mac. KB Article.
8. Perform a battery reset on your BlackBerry smartphone. KB Article.
9. Make sure your BlackBerry smartphone is not hour-glassing or have an application error appearing on the LCD screen. However if there is a JVM 507/513 error appearing on the BlackBerry the Desktop Manager for Mac will pick up the device and reload the software.
10. Make sure "Open using Rosetta" is not running/disabled on Mac OS X. KB Article.
I will be adding more tips and tricks to this post once I come across them.
Feel free to share with other community members and I always welcome suggestions and comments.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Hey burko74,
Do you have a media card in your BlackBerry? If so, do you get prompt for mass storage mode?
Also does the mac pick up the media card as a removable hard drive?
Have you tried to do a battery reset as well?
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

When I try disabling colour management in the printer driver, it keeps turning back on

I'm using Lightroom v2.4 and a Canon Pixma Pro 9500 printer with the latest driver. I've just tried to print from Lightroom for the first time since moving to this latest version of Lightroom and when I go into print setup and turn off colour management, the driver doesn't keep the setting. Nor does it allow me to do borderless printing. My choice of print quality is also lost - this never used to be a problem.
This is very frustrating and means I must use Photoshop to print which takes longer when there is much to do. Please can someone offer some advice. I can print from Photoshop without this happening.
Thanks
Joanne

Have you tried creating Print templates in LR? Available from the left panel
in Print module. That's what I do to make sure the printer driver settings
stay the same.
Are you quite sure you have the latest 9500 driver?
Eric
I'm using Windows XP SP3, and I have just one button at the bottom left of the
Lightroom print diaglogue window called 'Page settings', when you click this,
you can select the printer and go into properties, which is where I normally
disable colour management. It is also refusing to print at standard quality,
but it defaulting to high quality (which takes a lot longer).
Thing is that I can print from Photoshop without problems and it's from
Photoshop where I do much of my printing, but printing from Lightroom is good
if I have a big load of prints to do as it's so much quicker to set up and it
has the picture package facility.

VZAccess Manager Upgrade

I have had problems in the past blindly upgrading VZAcces Manager. I now have a message to upgrade to 7.6.4.4 2762s from 7.6.3.4 2642j. I would like to find what fixes are included in this version so I can decide whether or not to skip it. I have looked on both the Smith Mirco and VAccess Manager web sites and cannot find this information.
BTW - Clicking on the VZAccess Manager link in the update window does not take me anywhere.
Pantech 290
Win XP sp3

jwwilson454 wrote:
I did the upgrade today and when I plugged the Five Spot in it told me there was a firmware update. I tried to installed the update and received a message that the update failed. Now my Five Spot has a different SSID and I cannot log into it. I connect to the Manager and it say the device is not connected.
Hi jwwilson454,
I trust that the issue outlined in your post has been resolved and your device is working properly by now. In the event that the issue has not been resolved I have checked my resources and I learned that re-running the update tool has resolved this issue for other customers. Please find the update tool in your computer at the path below:
Crogram Files-Verizon Wireless-Firmware Updates-ZTE-AC30EUT_BD_VERIZONAC30V1.0.0B10.exe
Additionally, please keep in mind that this is a peer to peer forum and while our Social Media Team monitors the forum, we offer alternative options for immediate assistance. You can contact us via Twitter @VZWSupport Monday to Friday from 7am to 10pm and Saturday from 7am to 4pm.
You can also call 1-800-922-0204 from 6am to 11pm CST every day of the week.

Disable VZaccess Manager for Wi-Fi

Similar Messages

Maybe you are looking for