Disabled triggers in apps schema

Hi all
In my apps schema i can see too many triggers that are disabled!
Is this a normal situation?
I have lately convert my apps to multi-org.I have read some doc in metalink, that this situation can happen when converting to multi-org.
Do i have to enable all of them?
Thanks in advance, Soni

Hi Soni,
When converting to multi org all triggers are disabled and at the end enabled again (using a list created when starting the convert to multi org) when the conversion fails for example it will cause lots of invalid triggers.
See the following:
When starting Convert to multo org it first creates a Disable triggers script:
$APPL_TOP/admin/<SID>/PROD//out/orgcnvdt.sql"
and it will also create a script to enable them again:
$APPL_TOP/admin/<SID>/PROD/out/orgcnvet.sql
When the conversion fails somehow and you did not run the enable script before restarting you will endup with lost of disabled triggers from which you don't know which should be enabled.
If this is your test environment and you don't have the enable script anymore I would suggest to Create a new test environment as that will be faster then letting support fix the issue (possible not even possible)
In case of PROD and you don't have the enable script, then you have a serious problem as triggers are needed for everything, when you have triggers disabled which should be enabled it could cause data inconsistency, in that case contact Support asap as suggested already.
Good luck with it.
Regards,
Ronald

Similar Messages

Apex Application not working after importing to my apps schema...

Hi friends,
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends.
As this is my urgent requirement in my project..Reply me ASAP...
Thanks in Advance..
Regards,
Harry...

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How can I disable the Photos app from automatically running when I plug in my iPhone?

How can I disable the Photos app from automatically running when I plug in my iPhone?
I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
I just want to NOT have to kill the Photos app every time I plug in my phone.
Thanks.

I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted. But it is another example of the hide-and-seek Apple likes to play with us.
The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
Have you looked at Capture One? It looks much more similar to Aperture than Lightroom.

Office Web Apps - how to disable office web apps features for one web application

ENV: Sharepoint 2010 farm with office web apps + fast search
I have the requirement for one web application to open all its documents in client applications - I can enable feature "OpenInClient". This web application uses team site template and other web application also uses team site template. ( feature
stapling ruled out) Now I can run powershell cmdlet to enable this feature on all the currently existing site collections. But the requirement is to enable this feature for all the future site collections. This web applications has 60 k site collections
and atleast more than 10 site collections get created each day and they dont like the option to run a powershell script each day to activate this solution.
Is there any other way to by default activate new site collections on this WA to open in client applications by default (can we disable this office webapps features only on one web app)?
VM

I have learnt from this forum that it is not possible to turn off Office web apps on single web application. The line of control lies at farm level and then at site collection.
Disable
Office Web Apps on web application
VM

Error while running Re-create grants and synonyms for APPS schema

Hi,
I have upgraded customer's Oracle Apps 11i (11.5.10) database to Oracle 10g R2. While executing '+Re-create grants and synonyms+ ' as given in Note: 362203.1, I am gettng error:
plus80 -s APPS/***** @E:\EBSTEST\ebstestappl\ad\11.5.0\admin\sql\adappsgs.pls &systempwd 1 INV APPLSYS APPS TRUE FALSE TRUE
Error:
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.Connected.
old 2: ad_apps_private.create_grants_and_synonyms(&2,'&3','&4','&5','FALSE');
new 2: ad_apps_private.create_grants_and_synonyms(1,'INV','APPLSYS','APPS','FALSE');
begin
*+
ERROR at line 1:
ORA-20000: ORA-00955: name is already used by an existing
object:create_grants_and_synonyms(1,INV,APPLSYS,APPS): create_base_gs(INV,APPS): In Synonyms
Loop:create_synonym(INV,MTL_ONHAND_DISCREPANCY,APPS,MTL_ONHAND_DISCREPANCY):
do_apps_ddl(APPS,CREATE SYNONYM "MTL_ONHAND_DISCREPANCY" FOR INV."MTL_ONHAND_DISCREPANCY"):
ORA-06512: at line 5
MTL_ONHAND_DISCREPANCIES
I checked the database and there isn't MTL_ONHAND_DISCREPANCY synonym. But there is MTL_ONHAND_DISCREPANCIES synonym.
This is an upgraded instance from 11.0.3 and first time I am running Re-create grants and synonyms for APPS schema.
Plz let me know if anyone of you faced this issue.
Rgds,
Thiru

Hi,
there is no such table MTL_ONHAND_DISCREPANCY or synonym in Applications 11.5.10.2. Is that custom table created in your db?
After dropping this table from APPS schema 'Re-create grants and synonyms for APPS schema' went thru fine.Its correct
This table does not exist in INV schema in 11.5.10.2.
Could be possible that the consultant could have created this table in INV and APPS schema by mistake or whatever.Yes, with the same name, there might be table in APPS SCHEMA. When you run recreate grants and synonyms, adadmin tries to create synonym for that table in APPS schema. since there is object available with the same name in apps chema, you got that error.

Error In Adadmin Re-Create Grants And Synonyms For Apps Schema

HI,
I upgraded the my DB from 9.2.6 to 10.2.4.It was sucessfull.
While doing Postupgradayion steps -
Recreate grants and synonym for apps
a. Log in to server with applmgr user
b. Execute adadmin
c. Choose -> Maintain Applications Database Entities menu
d. Choose -> Re-create grants and synonyms for APPS schema
2 workers got failed ...
i chked the worker log file i found
sqlplus -s APPS/***** @/stageAPP/stageappl/ad/11.5.0/admin/sql/adappsgs.pls &systempwd 1 PO APPLSYS APPS TRUE FALSE TRUE
Connected.
old 2: ad_apps_private.create_grants_and_synonyms(&2,'&3','&4','&5','FALSE');
new 2: ad_apps_private.create_grants_and_synonyms(1,'PO','APPLSYS','APPS','FALSE');
begin
ERROR at line 1:
ORA-20000: ORA-00955: name is already used by an existing
object:create_grants_and_synonyms(1,PO,APPLSYS,APPS): create_base_gs(PO,APPS):
In Synonyms
Loop:create_synonym(PO,XXGOD_SEQ_DECORTIMESHEET_HDR,APPS,XXGOD_SEQ_DECORTIMESHEE
T_HDR): do_apps_ddl(APPS,CREATE SYNONYM "XXGOD_SEQ_DECORTIMESHEET_HDR" FOR
PO."XXGOD_SEQ_DECORTIMESHEET_HDR"):
ORA-06512: at line 5
Workaround $adctrl
Control
Worker Code Context Filename Status
1 Run Grants/Synonyms R115 adappsgs.pls FAILED
2 Run Grants/Synonyms R115 Wait
3 Run Grants/Synonyms R115 Wait
4 Run Grants/Synonyms R115 Wait
5 Run Grants/Synonyms R115 Wait
6 Run Grants/Synonyms R115 Wait
7 Run Grants/Synonyms R115 Wait
8 Run Grants/Synonyms R115 Wait
9 Run Grants/Synonyms R115 Wait
10 Run Grants/Synonyms R115 Wait
11 Run Grants/Synonyms R115 Wait
12 Run Grants/Synonyms R115 Wait
13 Run Grants/Synonyms R115 Wait
14 Run Grants/Synonyms R115 Wait
15 Run Grants/Synonyms R115 Wait
16 Run Grants/Synonyms R115 Wait
SQL> select owner, object_type from dba_objects where object_name = 'XXGOD_SEQ_DECORTIMESHEET_HDR';
OWNER OBJECT_TYPE
PO SEQUENCE
APPS SEQUENCE
Its Cutom Object .. I think i need to drop/rename anyone .. which one i should drop / rename .
Or
Is it possible to skip the failed workers .. if do .. please give me the steps ...
Thanks

Hi;
There is 8 option(hidden) avaliable but i suggest dont use this option.(As you mention its a custom,if you belive it wont problem you can use this hidden option or drop 'XXGOD_SEQ_DECORTIMESHEET_HDR' and recreate it later,its own your risk) By the way please check below notes which is similar error like yours
Run Adadmin To Recreate Grants And Synonyms ORA-20000 ORA-00955 In Synonyms Loop:create_synonym(GL,PLAN_TABLE,APPS,PLAN_TABLE) [ID 437714.1]
ADADMIN MAINTAINING APPLICATIONS GRANTS AND SYNONYMS APP-931 ORA-955 ORA-20000 [ID 1014455.102]
Regard
Helios

Compile invalid objects in apps schema

i make compiled the apps schema by
adadmin,utlrp.sql,compiled manual but still i am getting INVALID objects .. how to compile these objects ?
Below is the output
SQL>
column owner format A9
column object_name format A31
column object_type format A15
column last_ddl_time format A10
spool invalids.lst
select OWNER, OBJECT_NAME,OBJECT_TYPE,LAST_DDL_TIME
from dba_objects where status='INVALID'
order by owner;
OWNER OBJECT_NAME OBJECT_TYPE LAST_DDL_T
APPS FV_FACTS_TBAL_TRANSACTIONS PACKAGE BODY 03-MAR-13
APPS IGI_IAC_REINSTATE_PKG PACKAGE BODY 03-MAR-13
APPS IGI_IAC_RETIREMENT PACKAGE BODY 03-MAR-13
APPS CST_PERIODIC_ABSORPTION_PROC PACKAGE BODY 03-MAR-13
APPS FV_SLA_UTL_PROCESSING_PKG PACKAGE BODY 03-MAR-13
APPS FV_CCR_UTIL_PVT PACKAGE BODY 03-MAR-13
APPS PSA_AP_BC_PVT PACKAGE BODY 03-MAR-13
APPS XLA_00200_AAD_S_000012_PKG PACKAGE BODY 03-MAR-13
APPS AR_RECEIPT_UPDATE_API_PUB PACKAGE BODY 03-MAR-13
APPS AR_AUTOREC_API PACKAGE BODY 03-MAR-13
10 rows selected.
SQL> alter package APPS.FV_FACTS_TBAL_TRANSACTIONS compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.FV_FACTS_TBAL_TRANSACTIONS:
LINE/COL ERROR
1742/6 PL/SQL: SQL Statement ignored
1743/4 PL/SQL: ORA-00918: column ambiguously defined
SQL> alter package APPS.IGI_IAC_REINSTATE_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.IGI_IAC_REINSTATE_PKG:
LINE/COL ERROR
3470/3 PL/SQL: Statement ignored
3470/10 PLS-00306: wrong number or types of arguments in call to
'GET_ASSET_RETIRE_REC'
SQL> alter package APPS.IGI_IAC_RETIREMENT compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.IGI_IAC_RETIREMENT:
LINE/COL ERROR
4247/10 PL/SQL: Statement ignored
4247/18 PLS-00306: wrong number or types of arguments in call to
'GET_ASSET_RETIRE_REC'
SQL> alter package APPS.CST_PERIODIC_ABSORPTION_PROC compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.CST_PERIODIC_ABSORPTION_PROC:
LINE/COL ERROR
3901/3 PL/SQL: Statement ignored
3901/3 PLS-00306: wrong number or types of arguments in call to
'ITERATION_PROCESS'
SQL> alter package APPS.FV_SLA_UTL_PROCESSING_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.FV_SLA_UTL_PROCESSING_PKG:
LINE/COL ERROR
49/7 PL/SQL: Statement ignored
49/22 PLS-00302: component 'PSA_XLA_ERROR' must be declared
SQL> alter package APPS.FV_CCR_UTIL_PVT compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.FV_CCR_UTIL_PVT:
LINE/COL ERROR
2926/3 PL/SQL: Statement ignored
2926/19 PLS-00302: component 'CONTACT_NAME' must be declared
2928/4 PL/SQL: Statement ignored
2928/20 PLS-00302: component 'CONTACT_PHONE' must be declared
2929/8 PL/SQL: Statement ignored
2929/24 PLS-00302: component 'CONTACT_PHONE' must be declared
2931/3 PL/SQL: Statement ignored
2931/19 PLS-00302: component 'CONTACT_EMAIL' must be declared
2932/3 PL/SQL: Statement ignored
2932/19 PLS-00302: component 'CONTACT_FAX' must be declared
SQL> alter package APPS.PSA_AP_BC_PVT compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.PSA_AP_BC_PVT:
LINE/COL ERROR
291/11 PL/SQL: Statement ignored
291/26 PLS-00302: component 'PSA_XLA_ERROR' must be declared
346/13 PL/SQL: Statement ignored
346/28 PLS-00302: component 'PSA_XLA_ERROR' must be declared
835/7 PL/SQL: Statement ignored
835/12 PLS-00313: 'ISPREPAYDIST' not declared in this scope
1002/15 PL/SQL: Statement ignored
1002/34 PLS-00201: identifier 'J' must be declared
1014/13 PL/SQL: Statement ignored
1014/48 PLS-00201: identifier 'I' must be declared
1020/13 PL/SQL: Statement ignored
LINE/COL ERROR
1020/43 PLS-00201: identifier 'I' must be declared
1022/13 PL/SQL: Statement ignored
1024/73 PLS-00201: identifier 'I' must be declared
1055/11 PL/SQL: Statement ignored
1055/48 PLS-00201: identifier 'I' must be declared
1057/11 PL/SQL: SQL Statement ignored
1057/51 PLS-00201: identifier 'I' must be declared
1080/80 PLS-00201: identifier 'I' must be declared
1080/80 PLS-00201: identifier 'I' must be declared
SQL> alter package APPS.XLA_00200_AAD_S_000012_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.XLA_00200_AAD_S_000012_PKG:
LINE/COL ERROR
157514/2 PLS-00103: Encountered the symbol "THEN" when expecting one of
the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set
specification>
<an alternatively-quote
LINE/COL ERROR
SQL> alter package APPS.AR_RECEIPT_UPDATE_API_PUB compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.AR_RECEIPT_UPDATE_API_PUB:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00201: identifier 'AR_RECEIPT_UPDATE_API_PUB' must be
declared
1/14 PLS-00304: cannot compile body of 'AR_RECEIPT_UPDATE_API_PUB'
without its specification
SQL> show err
Errors for PACKAGE BODY APPS.AR_AUTOREC_API:
LINE/COL ERROR
2724/9 PL/SQL: SQL Statement ignored
2740/27 PL/SQL: ORA-00904: "EXT"."SEQ_TYPE_LAST": invalid identifier
note:application v12.0.4 database 10.2.3

SQL> alter package APPS.FV_FACTS_TBAL_TRANSACTIONS compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.FV_FACTS_TBAL_TRANSACTIONS:
LINE/COL ERROR
1742/6 PL/SQL: SQL Statement ignored
1743/4 PL/SQL: ORA-00918: column ambiguously defined
SQL> alter package APPS.CST_PERIODIC_ABSORPTION_PROC compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.CST_PERIODIC_ABSORPTION_PROC:
LINE/COL ERROR
3901/3 PL/SQL: Statement ignored
3901/3 PLS-00306: wrong number or types of arguments in call to
'ITERATION_PROCESS'
SQL> alter package APPS.AR_RECEIPT_UPDATE_API_PUB compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.AR_RECEIPT_UPDATE_API_PUB:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00201: identifier 'AR_RECEIPT_UPDATE_API_PUB' must be
declared
1/14 PLS-00304: cannot compile body of 'AR_RECEIPT_UPDATE_API_PUB'
without its specification
SQL> alter package APPS.XLA_00200_AAD_S_000012_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.XLA_00200_AAD_S_000012_PKG:
LINE/COL ERROR
157514/2 PLS-00103: Encountered the symbol "THEN" when expecting one of
the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set
specification>
<an alternatively-quote
LINE/COL ERROR
SQL> alter package APPS.FV_CCR_UTIL_PVT compile body;
Warning: Package Body altered with compilation errors.
SQL> show err
Errors for PACKAGE BODY APPS.FV_CCR_UTIL_PVT:
LINE/COL ERROR
2926/3 PL/SQL: Statement ignored
2926/19 PLS-00302: component 'CONTACT_NAME' must be declared
2928/4 PL/SQL: Statement ignored
2928/20 PLS-00302: component 'CONTACT_PHONE' must be declared
2929/8 PL/SQL: Statement ignored
2929/24 PLS-00302: component 'CONTACT_PHONE' must be declared
2931/3 PL/SQL: Statement ignored
2931/19 PLS-00302: component 'CONTACT_EMAIL' must be declared
2932/3 PL/SQL: Statement ignored
2932/19 PLS-00302: component 'CONTACT_FAX' must be declared

IStore - Cloned Apps Schema to access standalone Oracle Applications

Client has business across different continents and are using standalone oracle ebusiness applications across the locations.
They have recently bought an single iStore license and wants to use it across the locations. Oracle has recommended to buy four licenses of the same as they have standalone oracle e-biz installed at four locations.
Client is not happy buying so many licenses as they may have business in new locations in future. Client has agreed with the approach of cloning the APPS schema four times and then create/replace synonyms with DBlinks which points to four different locations.
This is similar to creating a responsibility using APPS_READ_ONLY schema. The only difference is creating a read/write APPS schema instead of ReadOnly.
• Database
•     Create a Database Link in iStore instance pointing to the US Oracle Apps instance
•     Create a Custom schema XXAPPS (contains synonyms + code objects), which is a clone of APPS schema
•     Provide Grants on objects in APPS schema for XXAPPS schema
•     Recursively re-compile the invalid code objects in XXAPPS schema
•     Create/Replace the synonyms in XXAPPS using the DBLink created for US instance, only for the products/modules used by iStore functionality
•     Investigate and fix the invalid objects
o          e.g errors due to accessing the remote objects, pl/sql feature constraints like FORALL cannot be used on the remote table, etc.,
•     The standard Oracle objects which are modified due to the above are placed in the custom top XXIBE_TOP/patch/115/sql
• Oracle Applications
•     Register the new Oracle User XXAPPS
o          (N) Security -> Oracle -> Register -> Database User Name: XXAPPS
•     Register the custom application per location/instance
o          (N) Application -> Register -> Application : XXUS iStore Customizations, Shortname: XXIBEUS, Basepath: XXIBE_TOP.
o     Please note that XXIBE_TOP is the common top used for all the custom applications (existing and new)
•     Register the new Oracle User in the DataGroup
o          (N) Security -> Oracle -> DataGroup -> Standard -> Application: XXUS iStore Customizations, Oracle ID: XXAPPS
•     Create a custom responsibilitie(s) based on the application 'XXus iStore Customizations'
o          (N) Security -> Responsibility -> Define
iStore
Create an iStore User/Dealer/Superuser & approve the user
Assign theto custom responsibilitie(s) the iStore User/Dealer/Superuser in Oracle Applications
I have an apprehension that there will be issues that needs to considered from maintainence perspective. If you have followed such an approach, what problems would you forsee ? and important things that needs to be considered before implementing such a solution?
Edited by: user626569 on Jul 25, 2011 4:14 PM

Thanks,      hsawwan and      samx18.
We use VNC. I found another good metalink noteL Subject:      Configuring VNC Or XVFB As The X Server For Applications 11i
     Doc ID:      Note:181244.1
Thanks,
Lily

APPS Schema name hardcoded in Oracle Applications Adapter Wizard

Hi,
I am current evaluating the use of Oracle BPEL using the OA Adapter. Problem is that the APPS schema is called something other that APPS, say APPS1. When creating a partner link using the OA Adapter wizard, the Wizard is look for the object under APPS which does not exist.
Please help!!!
Regards
John

You'll have better luck posting in the right forum. This one is for issues relating to Oracle's ODBC driver.
I'm not familiar enough with JDEV to know which forum that is top of my head though.
Greg

I want to compile apps schema in oracle applications production.

Hi,
Is there any care that must be taken to compile apps schema using adadmin in production.
With Regards
GNVMK

Hi,
Is there any care that must be taken to compile apps schema using adadmin in production.No, you can simply run adadmin and compile apps schema from adadmin while the application is up and running. Just make sure you login as applmgr and source the application env file before doing so.
Regards,
Hussein

Does the APPS schema have full access to custom objects

DB - 11.2.0.3 - s390 - SLES11SP2
APP - 12.1.3 - x86_64 - SLES11SP2
One of my lead developers has posed a question to me.......namely -
Does the APPS user have implicit select and delete privileges on custom objects without an explicit GRANT statement?

Please see (Step By Step Guide to Creating a Custom Application in Applications 11i [ID 216589.1]) which is applicable to R12 as well -- "Grant all privilege from each custom data object to the APPS schema" step.
Please also see (Step 9. Integrate your database objects with the APPS schema by granting APPS the access to your custom schema’s objects) in (Integrating Custom Applications with Oracle Applications [ID 176852.1).
Thanks,
Hussein

Performance issue while extracting data from non-APPS schema tables.

Hi,
I have developed an ODBC application to extract data from Oracle E-Business Suite 12 tables.
e.g. I am trying to extract data from HZ_IMP_PARTIES_INT table of Receivables application(Table is in "AR" database schema) using this ODBC application.
The performance of extraction (i.e. number of rows extracted per second) is very low if the table belongs to non-APPS schema. (e.g. HZ_IMP_PARTIES_INT belongs to "AR" database schema)
Now if I create same table (HZ_IMP_PARTIES_INT) with same data in "APPS" schema, the performance of extraction improves a lot. (i.e. the number of rows extracted per second increases a lot) with the same ODBC application.
The "APPS" user is used to connect to the database in both scenarios.
Also note that my ODBC application creates multiple threads and each thread creates its own connection to the database. Each thread extract different data using SQL filter condition.
So, my question is:
Is APPS schema optimized for any data extraction?
I will really appreciate any pointer on this.
Thanks,
Rohit.

Hi,
Is APPS schema optimized for any data extraction? I would say NO as data extraction performance should be the same for all schemas. Do you run "Gather Schema Statistics" concurrent program for ALL schemas on regular basis?
Regards,
Hussein

Restrict HR Tables on APPS Schema

Hi All
I want to restrict some HR tables like per_assignments_f ,per_all_people_f not access on APPS schema through their terminals or machine only two users can access it on APPS schema.
it is honorable for me if some one will help.
Edited by: user9947371 on Oct 1, 2012 3:32 AM

Hello,
first of all some version information can help.
But take a look into the Virtual Private Database function or the database vault function.
http://www.oracle.com/webfolder/technetwork/de/community/dbadmin/tipps/vpd/index.html
http://www.oracle.com/us/products/database/options/database-vault/overview/index.html
regards
Peter

How to grant update privilege on custom procedures created in apps schema?

Hi
We have R12.0.6 instance running in our organization. Our programmers keep requesting the 'write (update)' access on some custom procedures that are originally created in apps schema. I created one read-only like database user and granted 'execute/debug' privilges on those custom procedures, but still using this user procedures cannot be updated (in sufficient privileges).
Once they modify procedure, forwarding me the code. Using apps user profile, i can recreate procedures using create or replace command. This way it is working fine. Our concern is how they (programmers) themselves using database read-only user does this job? What privileges needs to be granted?
Please guide me?
Regards
Ariz

Arizuddin wrote:
Hi
We have R12.0.6 instance running in our organization. Our programmers keep requesting the 'write (update)' access on some custom procedures that are originally created in apps schema. I created one read-only like database user and granted 'execute/debug' privilges on those custom procedures, but still using this user procedures cannot be updated (in sufficient privileges).
Once they modify procedure, forwarding me the code. Using apps user profile, i can recreate procedures using create or replace command. This way it is working fine. Our concern is how they (programmers) themselves using database read-only user does this job? What privileges needs to be granted?
Also provide "alter procedure" privilege to that user.
Regards
Rajesh

Not able to connect to APPS schema in 10g database after upgradation

We have upgraded our database from 9.2.0.6 to 10.2.0.1(E-Business suite database).We have upgraded our database using dbua and it was succesful(No invalid objects are there in the databe).Now we are trying to connect using apps username but it is not recognising the username.How do we link the old database schema with new database?

Hi,
Could you please elaborate "You should make sure that all referenced in the context files point to the new ORACLE_HOME and that AutoConfig complete successfully".This is covered in the same upgrade document (See "Step 26. Implement and run AutoConfig" for details).
I think you are referring the context file to xml file which contains parameters like "s_dbdomain". I think mistake lies at this point.Not only this variable, I am referring to any variable which points to the old 9i ORACLE_HOME. But, again this makes no sense if you cannot find the APPS schema in the upgraded database!
Regards,
Hussein

Disabled triggers in apps schema

Similar Messages

Maybe you are looking for