Opening and closing a frame from an applet security problem

can I open a frame or a window from an applet and close the frame by using
System.exit(0) for the frame or will it throw a security problem.

I am using system.exit(0) to exit the JVM.
dispose()
Releases all of the native screen resources used by this Window, its subcomponents, and all of its owned children. That is, the resources for these Components will be destroyed, any memory they consume will be returned to the OS, and they will be marked as undisplayable.
If this frame have to be close and open again don't use dispose.
there is no check whether a frame is active? what you can do is set the the new frame to null (frame = null) and also when you dispose it, this will let you know if the frame is active or not.
Noah

Similar Messages

Opening and Closing inventory logic from MB5B

Hi Gurus,
I have a requirement to implement the logic used in transaction MB5B for opening and closing inventory.
I went through the program and searched form IMARD, BESTAND tables as some forum posts suggest, but could not figure out the complete set of logic to calculate the opening and closing inventory.
Has any one implemented the same logic and if yes if you can share that part of code that would be of great help as i dont have time to spend on R&D for the same.
Thanks all in advance.
Best Regards,
Ram.

check this logic.
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856
Regards
Prabhu

Opening and closing balance difference is showing from 2010 to 2011 F.year

Dear All,
Opening and closing balance difference is showing for Main Cash(Cash in h)
End of fiscal year 2010 closing Balance 85,451,909.70
Opening Balance 2011 is showing as 85,450,909.70
Rs 1000 difference is coming.
Please suggest if any Note is there?

Hi,
Somes after year end for audit / management adjustment entries postings done with previous year.
Execute N no of times Balance carry forward T.Code: FAGLGVTR until you get your closing balances & opening balances are the same. it is not harm to execute again & again.
up to 4.7EE for balance transfer you can use T.Code:F.16 from ECC 5 / 6 use tcode for balance transfer FAGLGVTR
Regards,
Viswa
Edited by: viswanatha s on Nov 4, 2011 12:54 PM

Opening and closing stock from mb5b

Hi Experts
I am writing a code which will display goods reciept, issue, transfer, etc according to movement type .
I have done the coding but the problem is I am not getting the opening stock by period , I want to get sum (lbkum) sum (salk3) into some formulae column .. I want to get the sum of lbkum from mbewh joining mseg,mkpf as period -1
ie if I select 04.03.2009 , I want the sum of stock from mbewh based on period -1 . so what formale I have to write
to get the opening stock on the date selected . The date range is selected from mkpf .
I want to get stock on whatever date selected from mkpf.
SELECT SINGLE * FROM mardh
WHERE matnr = p_matnr
AND werks = p_werks
AND lfmon = p_buper
AND lfgja = p_gjahr.
Regards
Piroz

you can get all data using MC.9 report
here you can get opening and closing stock with values based on material, plant, storage location
Kindly make sure while giving period
here it will take period in month and year i.e if you want opening stock for April then you have to give it as 03.2008 to 03.2008 and closing as 04.2008 to 04.2008
Regards
Edited by: WISH on Apr 23, 2008 1:15 PM

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

Did you try rebooting?

Performance Issue For Opening And Closing Balance In FBL1N/3N/5N

Dear experts,
 I Am Having Requirement to Bring Opening And Closing Balance In FBL1N, FBL3N, FBL5N.
For This requirement I Used BADI : FI_ITEMS_CH_DATA~CHANGE_ITEMS, below is my Code For FBL1N, And I've Done the same For 3N/5N...With Related BAPI
* IF SY-TCODE = 'FBL1N'.
* LOOP AT ct_items INTO gs_items.
* CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
* EXPORTING
* date = gs_items-budat
* days = '01'
* months = '00'
* signum = '-'
* years = '00'
* IMPORTING
* calc_date = lv_date.
* CALL FUNCTION 'BAPI_AP_ACC_GETKEYDATEBALANCE'
* EXPORTING
* companycode = gs_items-bukrs
* vendor = gs_items-konto
* keydate = lv_date
** BALANCESPGLI = ' '
** NOTEDITEMS = ' '
** IMPORTING
** RETURN =
* TABLES
* keybalance = lv_obal.
* CALL FUNCTION 'BAPI_AP_ACC_GETKEYDATEBALANCE'
* EXPORTING
* companycode = gs_items-bukrs
* vendor = gs_items-konto
* keydate = gs_items-budat
** BALANCESPGLI = ' '
** NOTEDITEMS = ' '
** IMPORTING
** RETURN =
* TABLES
* keybalance = lv_cbal
* READ TABLE lv_cbal INTO gs_cbal INDEX 1.
* gs_items-cbal = gs_cbal-lc_bal.
* READ TABLE lv_obal INTO gs_obal INDEX 1.
* gs_items-obal = gs_obal-lc_bal.
* MODIFY ct_items FROM gs_items TRANSPORTING obal cbal.
* CLEAR: gs_items,gs_obal,gs_cbal.
* ENDLOOP.
* ENDIF.
So, Above Code Causing Me the Performance Issue, Kindly Suggest Me the Solution..
Regards,
uday.

Hi Uday,
I am sending you the code i used for the creation a Zreport based on FBL5N. Please check if it can of any help.
*& Report ZFBL5N *
REPORT zfbl5n_new .
TABLES : bsid,knc1,lfc1.
TYPE-POOLS: slis.
TYPES: BEGIN OF ty_bsid,
 bukrs TYPE bsid-bukrs,
 kunnr TYPE bsid-kunnr,
 belnr TYPE bsid-belnr,
 buzei TYPE bsid-buzei,
 bldat TYPE bsid-bldat,
 blart TYPE bsid-blart,
 bschl TYPE bsid-bschl,
 shkzg TYPE bsid-shkzg,
 dmbtr TYPE bsid-dmbtr,
 augdt TYPE bsid-augdt,
 augbl TYPE bsid-augbl,
 zuonr TYPE bsid-zuonr,
 sgtxt TYPE bsid-sgtxt,
 zfbdt TYPE bsid-zfbdt,
 zterm TYPE bsid-zterm,
 zbd1t TYPE bsid-zbd1t,
 zbd2t TYPE bsid-zbd2t,
 zbd3t TYPE bsid-zbd3t,
 kkber TYPE bsid-kkber,
 bstat TYPE bsid-bstat,
 umskz TYPE bsid-umskz,
 END OF ty_bsid.
TYPES: BEGIN OF ty_bsik,
 bukrs TYPE bsik-bukrs,
 lifnr TYPE bsik-lifnr,
 belnr TYPE bsik-belnr,
 buzei TYPE bsik-buzei,
 bldat TYPE bsik-bldat,
 blart TYPE bsik-blart,
 bschl TYPE bsik-bschl,
 shkzg TYPE bsik-shkzg,
 dmbtr TYPE bsik-dmbtr,
 augdt TYPE bsik-augdt,
 augbl TYPE bsik-augbl,
 zuonr TYPE bsik-zuonr,
 sgtxt TYPE bsik-sgtxt,
 zfbdt TYPE bsik-zfbdt,
* KKBER TYPE bsik-kkber,
 zterm TYPE bsik-zterm,
 zbd1t TYPE bsik-zbd1t,
 zbd2t TYPE bsik-zbd2t,
 zbd3t TYPE bsik-zbd3t,
 bstat TYPE bsid-bstat,
 umskz TYPE bsid-umskz,
 END OF ty_bsik.
TYPES: BEGIN OF ty_final,
 belnr TYPE bsid-belnr,
* buzei TYPE bsak-buzei,
 bldat TYPE bsid-bldat,
 blart TYPE bsid-blart,
 chq TYPE bsid-zuonr,
 debit TYPE bsid-dmbtr,
 credit TYPE bsid-dmbtr,
 txt TYPE bsid-sgtxt,
 date TYPE bsid-zfbdt,
 kkber TYPE bsid-kkber,
 zterm TYPE bsid-zterm,
 augbl TYPE bsid-augbl,
 augdt TYPE bsid-augdt,
 flag TYPE c,
 END OF ty_final.
TYPES : BEGIN OF gs_openbal,
 bukrs TYPE bapi3007_2-comp_code,
 kunnr TYPE bapi3007_2-customer,
 dmbtr TYPE bapi3007_2-lc_amount,
 END OF gs_openbal.
DATA: it_bsid TYPE STANDARD TABLE OF ty_bsid,
 it_bsik TYPE STANDARD TABLE OF ty_bsik,
 it_final TYPE STANDARD TABLE OF ty_final.
DATA: wa_bsid TYPE ty_bsid,
 wa_bsik TYPE ty_bsik,
 wa_final TYPE ty_final.
DATA: w_days TYPE t5a4a-dlydy,
 w_month TYPE t5a4a-dlymo,
 w_year TYPE t5a4a-dlyyr,
 w_date TYPE p0001-begda,
 w_name1 TYPE kna1-name1,
 w_ort01 TYPE kna1-ort01,
 w_lifnr TYPE kna1-lifnr,
 w_dmbtr1 TYPE bsid-dmbtr,
 w_dmbtr2 TYPE bsid-dmbtr,
 w_dmbtr3 TYPE bsad-dmbtr,
 w_dmbtr4 TYPE bsad-dmbtr,
 w_opbal TYPE bsid-dmbtr,
 w_credit TYPE bsik-dmbtr,
 w_debit TYPE bsik-dmbtr,
 w_clobal TYPE bsik-dmbtr,
 w_credit1 TYPE bsik-dmbtr,
 w_debit1 TYPE bsik-dmbtr,
 w_clobal1 TYPE bsik-dmbtr.
DATA: ld_yrper LIKE rwcoom-fiscper,
 kunnr LIKE kna1-kunnr,
 x_norm TYPE c,
 x_park,
 x_apar,
 x_merk,
 ok_code(4),
 wa_x001 LIKE x001,
 return LIKE bapireturn,
 line_count LIKE sy-loopc,
 number_of_records TYPE i,
 xindex LIKE sy-tabix,
 open LIKE knc1-um01s,
 temp(20),
 close LIKE knc1-um01s,
 gjahr LIKE bsid-gjahr,
 period LIKE bkpf-monat,
 f(1),
 v_char(2),
 closec(20),
 openc(20),
 debit LIKE bapi3007_2-lc_amount,
 credit LIKE debit.
DATA : v_dmbtr LIKE bsid-dmbtr.
*DATA : tot_debit LIKE t_ar-debit,
* tot_credit LIKE t_ar-credit.
DATA : t_kna1 LIKE kna1 OCCURS 1 WITH HEADER LINE,
 t_knb1 LIKE knb1 OCCURS 10 WITH HEADER LINE.
DATA ibsid LIKE bsid OCCURS 0 WITH HEADER LINE.
DATA ibsad LIKE bsad OCCURS 0 WITH HEADER LINE.
DATA ibsik LIKE bsik OCCURS 0 WITH HEADER LINE.
DATA ibsak LIKE bsak OCCURS 0 WITH HEADER LINE.
DATA : it_fieldcat_alv TYPE slis_t_fieldcat_alv,
 wa_fieldcat_alv TYPE slis_fieldcat_alv,
 is_layout_alv TYPE slis_layout_alv,
 wa_layout_alv TYPE slis_layout_alv,
 it_list_top_of_page TYPE slis_t_listheader,
 it_events TYPE slis_t_event,
 wa_events TYPE LINE OF slis_t_event.
DATA : BEGIN OF ibukrs OCCURS 0,
 bukrs LIKE t001-bukrs,
 END OF ibukrs.
DATA : BEGIN OF ikunnr1 OCCURS 0,
 kunnr LIKE knc1-kunnr,
 END OF ikunnr1.
DATA : BEGIN OF ikunnr OCCURS 0,
 kunnr LIKE knc1-kunnr,
 bukrs LIKE t001-bukrs,
 lifnr LIKE lfc1-lifnr,
 END OF ikunnr.
DATA: it_sort TYPE slis_t_sortinfo_alv,
 wa_sort TYPE slis_sortinfo_alv.
DATA: r_bschl TYPE RANGE OF bschl,
 wa_bschl LIKE LINE OF r_bschl.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_kunnr TYPE bsid-kunnr OBLIGATORY,
 p_bukrs TYPE bsid-bukrs OBLIGATORY.
SELECT-OPTIONS: so_budat FOR bsid-budat .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : p_normal AS CHECKBOX,
 p_spl AS CHECKBOX,
 p_vendor AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b2.
PERFORM get_data.
PERFORM process_data.
*PERFORM calculate_openbal. " Commented by anish
PERFORM calculate_open_bal.
PERFORM calculate_closing_bal.
PERFORM build_catalog_sort USING it_sort.
PERFORM reuse_alv_events_get .
PERFORM display_data.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM get_data .
 SELECT bukrs kunnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t kkber
 bstat umskz FROM bsid
 INTO TABLE it_bsid
 WHERE bukrs = p_bukrs
 AND kunnr = p_kunnr
 AND budat IN so_budat.
 SELECT bukrs kunnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t kkber
 bstat umskz FROM bsad
 APPENDING TABLE it_bsid
 WHERE bukrs = p_bukrs
 AND kunnr = p_kunnr
 AND budat IN so_budat.
 SELECT SINGLE name1 ort01 lifnr FROM kna1
 INTO (w_name1 , w_ort01 , w_lifnr)
 WHERE kunnr = p_kunnr.
 IF p_vendor IS NOT INITIAL.
 SELECT bukrs lifnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t
 bstat umskz FROM bsik
 APPENDING TABLE it_bsik
 WHERE bukrs = p_bukrs
 AND lifnr = w_lifnr
 AND budat IN so_budat.
 SELECT bukrs lifnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t
 bstat umskz FROM bsak
 APPENDING TABLE it_bsik
 WHERE bukrs = p_bukrs
 AND lifnr = w_lifnr
 AND budat IN so_budat.
 ENDIF.
 SORT it_bsid BY bschl.
 DELETE it_bsid WHERE bschl = '04'.
 DELETE it_bsid WHERE bschl = '07'.
 DELETE it_bsid WHERE bschl = '17'.
 DELETE it_bsid WHERE bschl = '34'.
 DELETE it_bsid WHERE bschl = '27'.
 DELETE it_bsid WHERE bschl = '37'.
 SORT it_bsik BY bschl.
 DELETE it_bsik WHERE bschl = '04'.
 DELETE it_bsik WHERE bschl = '07'.
 DELETE it_bsik WHERE bschl = '17'.
 DELETE it_bsik WHERE bschl = '34'.
 DELETE it_bsik WHERE bschl = '27'.
 DELETE it_bsik WHERE bschl = '37'.
ENDFORM. " GET_DATA
*& Form PROCESS_DATA
* text
* --> p1 text
* <-- p2 text
FORM process_data .
 DATA:okay TYPE c VALUE space.
 w_month = '00'.
 w_year = '00'.
 SORT it_bsid BY bldat .
 LOOP AT it_bsid INTO wa_bsid.
 PERFORM check_item_ok USING p_normal
 p_spl
 p_vendor
* x_park
 wa_bsid
 CHANGING okay.
 CHECK okay = 'X'.
 wa_final-belnr = wa_bsid-belnr.
 wa_final-bldat = wa_bsid-bldat.
 wa_final-blart = wa_bsid-blart.
 wa_final-txt = wa_bsid-sgtxt.
 wa_final-kkber = wa_bsid-kkber.
 wa_final-zterm = wa_bsid-zterm.
 wa_final-augbl = wa_bsid-augbl.
 wa_final-augdt = wa_bsid-augdt.
 wa_final-flag = 'C'.
 IF wa_bsid-blart = 'DZ'.
 wa_final-chq = wa_bsid-zuonr.
 ENDIF.
 IF wa_bsid-shkzg = 'S'.
 wa_final-debit = wa_bsid-dmbtr.
 ELSEIF wa_bsid-shkzg = 'H'.
 wa_final-credit = wa_bsid-dmbtr.
 ENDIF.
 w_credit = w_credit + wa_final-credit.
 w_debit = w_debit + wa_final-debit.
****** Net due date
 IF wa_bsid-zbd1t IS NOT INITIAL.
 w_days = wa_bsid-zbd1t.
 ELSEIF wa_bsid-zbd2t IS NOT INITIAL.
 w_days = wa_bsid-zbd2t.
 ELSEIF wa_bsid-zbd3t IS NOT INITIAL.
 w_days = wa_bsid-zbd3t.
 ENDIF.
 IF w_days IS INITIAL.
 wa_final-date = wa_bsid-zfbdt.
 ELSE.
 CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
 EXPORTING
 date = wa_bsid-zfbdt
 days = w_days
 months = w_month
 signum = '+'
 years = w_year
 IMPORTING
 calc_date = w_date.
 wa_final-date = w_date.
 ENDIF.
 APPEND wa_final TO it_final.
 CLEAR: w_days , w_date , wa_final .
 ENDLOOP.
 IF it_bsik IS NOT INITIAL.
 CLEAR: w_days , w_date.
 SORT it_bsik BY bldat.
 LOOP AT it_bsik INTO wa_bsik.
 wa_final-belnr = wa_bsik-belnr.
 wa_final-bldat = wa_bsik-bldat.
 wa_final-blart = wa_bsik-blart.
 wa_final-txt = wa_bsik-sgtxt.
* wa_final-kkber = wa_bsik-kkber.
 wa_final-zterm = wa_bsik-zterm.
 wa_final-augbl = wa_bsik-augbl.
 wa_final-augdt = wa_bsik-augdt.
 wa_final-flag = 'V'.
 IF wa_bsik-blart = 'DZ'.
 wa_final-chq = wa_bsik-zuonr.
 ENDIF.
 IF wa_bsik-shkzg = 'S'.
 wa_final-debit = wa_bsik-dmbtr.
 ELSEIF wa_bsik-shkzg = 'H'.
 wa_final-credit = wa_bsik-dmbtr.
 ENDIF.
 w_credit1 = w_credit1 + wa_final-credit.
 w_debit1 = w_debit1 + wa_final-debit.
******* Net Due date
 IF wa_bsik-zbd1t IS NOT INITIAL.
 w_days = wa_bsik-zbd1t.
 ELSEIF wa_bsik-zbd2t IS NOT INITIAL.
 w_days = wa_bsik-zbd2t.
 ELSEIF wa_bsik-zbd3t IS NOT INITIAL.
 w_days = wa_bsik-zbd3t.
 ENDIF.
 IF w_days IS INITIAL.
 wa_final-date = wa_bsik-zfbdt.
 ELSE.
 CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
 EXPORTING
 date = wa_bsik-zfbdt
 days = w_days
 months = w_month
 signum = '+'
 years = w_year
 IMPORTING
 calc_date = w_date.
 ENDIF.
 wa_final-date = w_date.
 APPEND wa_final TO it_final.
 CLEAR: wa_final.
 ENDLOOP.
 ENDIF.
ENDFORM. " PROCESS_DATA
*& Form DISPLAY_DATA
* text
* --> p1 text
* <-- p2 text
FORM display_data .
 wa_fieldcat_alv-fieldname = 'BELNR'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-003.
 wa_fieldcat_alv-outputlen = '11'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'BLDAT'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-004.
 wa_fieldcat_alv-outputlen = '13'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'BLART'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-005.
 wa_fieldcat_alv-outputlen = '02'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'CHQ'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-006.
 wa_fieldcat_alv-outputlen = '09'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'DEBIT'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-007.
 wa_fieldcat_alv-outputlen = '15'.
 wa_fieldcat_alv-do_sum = 'X'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'CREDIT'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-008.
 wa_fieldcat_alv-outputlen = '15'.
 wa_fieldcat_alv-do_sum = 'X'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'TXT'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-009.
 wa_fieldcat_alv-outputlen = '50'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'DATE'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-010.
 wa_fieldcat_alv-outputlen = '12'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'KKBER'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-011.
 wa_fieldcat_alv-outputlen = '04'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'ZTERM'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-012.
 wa_fieldcat_alv-outputlen = '13'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'AUGBL'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-013.
 wa_fieldcat_alv-outputlen = '15'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'AUGDT'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-seltext_l = text-014.
 wa_fieldcat_alv-outputlen = '17'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 wa_fieldcat_alv-fieldname = 'FLAG'.
 wa_fieldcat_alv-tabname = 'IT_FINAL'.
 wa_fieldcat_alv-tech = 'X'.
 APPEND wa_fieldcat_alv TO it_fieldcat_alv.
 CLEAR wa_fieldcat_alv.
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 is_layout = wa_layout_alv
 it_fieldcat = it_fieldcat_alv
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 it_sort = it_sort
 it_events = it_events
 i_save = 'A'
 TABLES
 t_outtab = it_final
 EXCEPTIONS
 program_error = 1
 OTHERS = 2
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
* CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
* EXPORTING
* i_callback_program = sy-repid
* i_callback_top_of_page = 'TOP_OF_PAGE'
* is_layout = wa_layout_alv
* it_fieldcat = it_fieldcat_alv
* it_sort = it_sort
*** I_DEFAULT = 'X'
** i_save = 'A'
*** IT_EVENTS =
* TABLES
* t_outtab = it_final
* EXCEPTIONS
* program_error = 1
* OTHERS = 2
* IF sy-subrc <> 0.
*** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM. " DISPLAY_DATA
*& Form TOP_OF_PAGE
* Header at top of page.
FORM top_of_page.
 SKIP 1.
 WRITE: AT 35 'Account Statement from' , so_budat-low , 'to' , so_budat-high.
 SKIP 2.
 WRITE: AT /5 'CUSTOMER:' , p_kunnr.
 WRITE: AT 35 'Name:' , w_name1.
 WRITE: AT /5 'Company:' , p_bukrs.
 WRITE: AT 35 'City:' , w_ort01.
 SKIP 1.
 WRITE: AT /5 'Opening Balance as on' , so_budat-low , ' ' , w_opbal LEFT-JUSTIFIED.
 SKIP 2.
ENDFORM. "TOP_OF_PAGE
*& Form END_OF_PAGE
* Footer at End of page.
FORM end_of_page.
 SKIP 2.
 IF so_budat-high IS NOT INITIAL.
 WRITE: AT 5 'Closing Balance as on' , so_budat-high , ' ' , w_clobal LEFT-JUSTIFIED.
 ELSE.
 WRITE: AT 5 'Closing Balance ' , w_clobal LEFT-JUSTIFIED.
 ENDIF.
ENDFORM. "end_of_page
*& Form CALCULATE_OPENBAL
* text
* --> p1 text
* <-- p2 text
FORM calculate_openbal .
 DATA:v_gjahr TYPE bsid-gjahr.
 DATA: v_period LIKE t009b-poper,v_monat LIKE t001-periv.
 CALL FUNCTION 'FI_PERIOD_DETERMINE'
 EXPORTING
 i_budat = so_budat-low
 i_bukrs = p_bukrs
* I_PERIV = ' '
* I_GJAHR = 0000
* I_MONAT = 00
* X_XMO16 = ' '
 IMPORTING
 e_gjahr = v_gjahr
* e_monat = v_monat
 e_poper = v_period.
 IF sy-subrc NE 0.
 ENDIF.
 DATA: f_date LIKE sy-datum.
 CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
 EXPORTING
 i_gjahr = v_gjahr
 i_monmit = 00
 i_periv = 'V3'
 i_poper = v_period
 IMPORTING
 e_date = f_date.
 period = v_period - 1.
 gjahr = v_gjahr.
 DATA wa_kna1 LIKE kna1.
 CALL FUNCTION 'READ_KNA1'
 EXPORTING
 xkunnr = p_kunnr
 IMPORTING
 xkna1 = wa_kna1
 EXCEPTIONS
 key_incomplete = 1
 not_authorized = 2
 not_found = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE w023(zwww).
 CALL SCREEN 0010.
 ENDIF.
 MOVE-CORRESPONDING wa_kna1 TO t_kna1.
 APPEND t_kna1.
 SELECT kunnr FROM kna1 INTO TABLE ikunnr1
 WHERE kunnr = p_kunnr.
 SELECT bukrs FROM t001 INTO TABLE ibukrs
 FOR ALL ENTRIES IN t_knb1
 WHERE bukrs = t_knb1-bukrs.
 LOOP AT ikunnr1.
 LOOP AT ibukrs.
 ikunnr-kunnr = ikunnr1-kunnr.
 ikunnr-bukrs = ibukrs-bukrs.
 READ TABLE t_kna1 WITH KEY kunnr = ikunnr1-kunnr.
 ikunnr-lifnr = t_kna1-lifnr.
 APPEND ikunnr.
 ENDLOOP.
 ENDLOOP.
 DELETE ikunnr WHERE bukrs NE p_bukrs.
 LOOP AT ikunnr.
 CLEAR: knc1,lfc1,f.
 IF NOT ( ikunnr-kunnr IS INITIAL ) AND NOT ( p_vendor IS INITIAL ).
 SELECT SINGLE * FROM lfc1
 WHERE gjahr = gjahr AND bukrs = ikunnr-bukrs
 AND lifnr = ikunnr-lifnr.
 ENDIF.
 SELECT SINGLE * FROM knc1
 WHERE gjahr = gjahr AND bukrs = p_bukrs
 AND kunnr = p_kunnr.
 IF sy-subrc = 0.
 CASE period .
 WHEN 12.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
 knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h +
 knc1-um11s - knc1-um11h + knc1-um12s - knc1-um12h.
 IF NOT ( lfc1 IS INITIAL ).
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
 lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
 lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h +
 lfc1-um11s - lfc1-um11h + lfc1-um12s - lfc1-um12h.
 ENDIF.
 WHEN 11.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
 knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h +
 knc1-um11s - knc1-um11h.
 IF NOT ( lfc1 IS INITIAL ) .
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
 lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
 lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h +
 lfc1-um11s - lfc1-um11h.
 ENDIF.
 WHEN 10.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
 knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h .
 IF NOT ( lfc1 IS INITIAL ) .
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
 lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
 lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h.
 ENDIF.
 WHEN 9.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
 knc1-um09s - knc1-um09h .
 IF NOT ( lfc1 IS INITIAL ) .
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
 lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
 lfc1-um09s - lfc1-um09h.
 ENDIF.
 WHEN 8.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h.
 IF NOT ( lfc1 IS INITIAL ) .
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
 lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h .
 ENDIF.
 WHEN 7.
 open = knc1-umsav +
 knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
 knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
 knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
 knc1-um07s - knc1-um07h .
 IF NOT ( lfc1 IS INITIAL ) .
 open = open + lfc1-umsav +
 lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
 lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
 lfc1-um05s - lfc1-um

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR BSTAT
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
 WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
 CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
 AND BUKRS = T_BKPF-BUKRS
 AND GJAHR = T_BKPF-GJAHR
 AND AUGBL <> ' '.
 EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
 WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
 WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

COPA reporting with open and closed projects

Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
Maddy

Dear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. This item will then not be taken into account by the materials planning and control system.
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen.

How to open and closed posting period??

Dear Gurus,
Pls help me, how to open and closed posting period.when and how we used special period.
Regrds
Mahesh

HI,
Tcode is ob52
here we generally provide the following details
a/c type from a/c to a/c from period year to period year from period year to period
+ 1 2007 12 2007 13 2007 16
+ implies it applicable to all account types
generally we can have maximum 4 special periods and total no of periods(normal+special) should not exceed 16
generally we use special periods for year end adjustments like tax adjustments
if it is useful assign me points

Reg: Open and Closed Activities in DTR

Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
Pramod

Dear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya

Open and Closed Time Outside of the 15 Minute Options

I have a 13 agent Call Center with one CSQ with Skills based routing.
The Call Center closes at 8 pm on Weekdays and 12 pm on Saturday EST. The time of day function only allows me to choose 15 min increments for open and closed. So the Call Center either closes at 8 pm or 7:45 pm. I need to prevent calls from being queued after 7:58 pm on Weekdays and 11:58 am on Saturday. I don’t know how to get around this 15 min restriction. A friend of mine told me that some kind of Java query can be entered into a Boolean variable and then use If / Then statements to check the time and route the call to closed at 7:58 pm and 11:58 am. Any help will be appreciated.

Most commonly used backup methods

Open and closed hand cursors

I have a drag image application and I wanted to use the open and closed hand cursors to move the image about. It seems there is no easy way of accessing these in Java. After searching for cursor names etc.. I decided to hard code the cursors from the .gif image. Also I didn't want the .GIFs as files as this adds to loading problems so I ended up using arrays of pixels that took a little while to enter.
I'm giving you the code if you ever need to use it as I typed it in and wouldn't want anyone else to have to do the same.
int curWidth=32;
 int curHeight=32;
 int curCol;
 Image img;
 int x,y;
 int closed_black[] = { 6,5,7,5,9,5,10,5,12,5,13,5,5,6,8,6,11,6,14,6,
 15,6,5,7,14,7,16,7,6,8,16,8,5,9,6,9,16,9,4,10,
 16,10,4,11,16,11,4,12,15,12,5,13,15,13,6,14,14,14,
 7,15,14,15,7,16,14,16,0};
 int closed_white[] = { 6,4,7,4,9,4,10,4,12,4,13,4,5,5,8,5,11,5,14,5,15,5,
 4,6,6,6,7,6,9,6,10,6,12,6,13,6,16,6,4,7,15,7,17,7,
 5,8,17,8,4,9,17,9,3,10,5,10,15,10,17,10,3,11,17,11,
 3,12,16,12,4,13,16,13,5,14,15,14,6,15,15,15,6,16,
 15,16,7,17,14,17,0};
 int closed_whiteruns[] = {6,13,7,15,7,15,5,15,5,15,5,14,6,14,7,13,8,13,8,13,0};
 int open_black[] = { 10,3,11,3,6,4,7,4,9,4,12,4,13,4,14,4,5,5,8,5,9,5,12,5,
 15,5,5,6,8,6,9,6,12,6,15,6,17,6,6,7,9,7,12,7,15,7,16,7,18,7,
 6,8,9,8,12,8,15,8,18,8,4,9,5,9,7,9,15,9,18,9,3,10,6,10,7,10,
 18,10,3,11,7,11,17,11,4,12,17,12,5,13,17,13,5,14,16,14,6,15,
 16,15,7,16,15,16,8,17,15,17,8,18,15,18,0};
 int open_white[] = {10,2,11,2,6,3,7,3,9,3,12,3,13,3,5,4,8,4,10,4,11,4,15,4,
 4,5,6,5,7,5,10,5,11,5,13,5,14,5,16,5,17,5,4,6,6,6,7,6,10,6,
 11,6,13,6,14,6,16,6,18,6,5,7,7,7,8,7,10,7,11,7,13,7,14,7,17,7,
 19,7,4,8,5,8,7,8,8,8,10,8,11,8,13,8,14,8,16,8,17,7,19,8,3,9,6,9,
 16,9,17,9,19,9,2,10,4,10,5,10,19,10,2,11,18,11,3,12,18,12,4,13,
 18,13,4,14,17,14,5,15,17,15,6,16,16,16,7,17,18,17,7,18,16,18,
 8,19,15,19,0};
 int open_whiteruns[] = {9,14,8,17,4,16,5,16,6,16,6,15,7,15,8,14,9,14,9,14,0};
 int pix[] = new int[curWidth*curHeight];
 for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
 // black pixels
 curCol=Color.black.getRGB();
 int n=0;
 while(closed_black[n]!=0)
 pix[closed_black[n++]+closed_black[n++]*curWidth]=curCol;
 // white pixels
 curCol=Color.white.getRGB();
 n=0;
 while(closed_white[n]!=0)
 pix[closed_white[n++]+closed_white[n++]*curWidth]=curCol;
 // white pixel runs
 n=0;
 y=7;
 while(closed_whiteruns[n]!=0) {
 for(x=closed_whiteruns[n++];x<closed_whiteruns[n];x++)
 pix[x+y*curWidth]=curCol;
 n++; y++;
 img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
 closedhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"closedhand");
 for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
 // black pixels
 curCol=Color.black.getRGB();
 n=0;
 while(open_black[n]!=0)
 pix[open_black[n++]+open_black[n++]*curWidth]=curCol;
 // white pixels
 curCol=Color.white.getRGB();
 n=0;
 while(open_white[n]!=0)
 pix[open_white[n++]+open_white[n++]*curWidth]=curCol;
 // white pixel runs
 n=0;
 y=9;
 while(open_whiteruns[n]!=0) {
 for(x=open_whiteruns[n++];x<open_whiteruns[n];x++)
 pix[x+y*curWidth]=curCol;
 n++; y++;
 img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
 openhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"openhand");
 setCursor(openhandCursor);you need to define openhandCursor and closedhandCursor with your other cursor definitions (I made them default to start with) and then just use setcursor as normal. There must be an easier way to do this!
p.s. thanks to Martin Zvarik for the original code here: http://www.jguru.com/faq/view.jsp?EID=9958

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR BSTAT
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
 WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
 CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
 AND BUKRS = T_BKPF-BUKRS
 AND GJAHR = T_BKPF-GJAHR
 AND AUGBL <> ' '.
 EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
 WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
 WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Open and closed cursor

I have some doubts/questions .
What is the difference between open and closed cursor?
Are library cache locks same as parse locks?
What is the difference between latch and mutex?
I would be grateful if experts could answer these questions.
Regards

Almost correct. The terminology is however nor correct.
Simplistically:
The SQL engine receives a SQL. It attempts a soft parse first. This means looking for an existing cursor in the Shared Pool with the same SQL. This existing cursor can be in use by other sessions. It does not matter - if that cursor is in used (opend by other sessions), or not. It may not be in use at all and simply sitting there in the cache. If such a cursor is found, it is used for that session's SQL - and that session gets a cursor handle (reference/pointer) to that existing cursor.
If the SQL engine does not find an existing cursor to use, it needs to create a brand new cursor in the Shared Pool. This is a hard parse. Again, the session receives a cursor handle for that new cursor created.
And that is it.
You now need to decide how to use that cursor handle. The cursor itself is a program. You have a handle to execute that cursor program. Via its bind interface you can input data to this cursor program. Then execute it and receive (fetch) output of that cursor program.
So the ideal is to re-use the cursor handle again and again.
Basic example: the following is not optimal as the same cursor is opened and closed, opened and closed, for each read from the file. A lot of soft parsing results.
while not-eof( filehandle )   // read data from a file
read file data into var1, var2
open cursor for 'insert into testtab values( :1, :2)'   // create a cursor
bind cursor :1 = var, :2 = var2 // bind values to cursor (for insert)
exec cursor // do SQL insert
close cursor
end whileThis is a lot better. A single cursor is used and executed again and again:
open cursor for 'insert into testtab values( :1, :2)'   // create a cursor
while not-eof( filehandle )   // read data from a file
read file data into var1, var2
bind cursor :1 = var, :2 = var2 // bind values to cursor (for insert)
exec cursor // do SQL insert
end while
close cursor In this case a single soft/hard parse - and the client uses that cursor handle to execute that cursor (insert data) program again and again.

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing a frame from an applet security problem

Similar Messages

Maybe you are looking for