Disabling all movie clips that are on lower levels

Hello
I have a movie clip that pops up over all other movie clips.
But it is still possible to interact with these movie clips that
are beneath the mc that has popped up. Is there any way to disable
all of the movie clips that are beneath the one that popped up?
thanks

Typically the way to do this is simply create a large
invisible MovieClip which covers everything, and give it a an
interactive event. I often use:
on(rollOver){
useHandCursor = false;
This way not only does it steal interaction from anything
below it, it makes it so the cursor doesn't turn into a hand making
the user think there's something clickable.
You could also make a loop which checks getDepth() and if
it's below a specified depth, set enabled = false, but there's
really no reason in doing that.

Similar Messages

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
B

yeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

IMovie HD refuses to import .MOV clips that it used to import.

I've got an odd problem. Doing a search didn't turn up anything relevant to my situation so I'm gonna try to pick some brains on here.
My Problem: My version of iMovie(5.0.2) no longer recognizes .mov clips that it used to. Meaning that when I try to import clips using settings that worked previously, I am now confronted with an Error during import message that reads "The file could not be imported: Unknown Error". Two things have changed since I last made a project.
1.) I have added a microphone that now allows me to record stereo audio. I don't think this is the culprit.
2.) I updated to 10.6.6 Recently. I think this may be what messed things up.
After trying to Drag and also import clips through the menu with no success, I tried to import clips that I have used before under the exact same conditions and was greeted with the same error. This is importing using the HDV 720p setting. If I try to import new or old clips using the standard DV (16:9) setting then everything works.
These same clips are able to be imported into iMovie '09 with no trouble but I am uncomfortable with that interface. Is there anything I can do to continue to work in iMovie HD or would I just be better off with getting used to iMovie 09?
Thank you for any replies.

I have Mac 10.6.6 and use iMovie 05 transferring it to iDVD 08. It is getting less easy to do, but usually i make the movie in 05, complete with chapter marking and press the export to DVD.
The file for the Movie I have made is saved automatically in the Movie folder on my owner/home page. To get it out to iDVD 08 open 08 and select create new project and click save This puts a small file into Documents, However to get your work into the new DVD select import>video and when the screen opens for you to find it go to your movie folder in your owners area and click to open the file. It works, but there is usually a problem somewhere along the line. Usually a different one each time, occasionally it goes like clockwork. It won't work if you try the drop down 'open' option.
This last time I got so irritated that I've downloaded the last set of film clips to 05 and then transferred them to 08 to compare the results. I still feel that the later versions are less good (?dumbed down) and await to be converted.

How to build a custom movie clip that will be used as a cell renderer for column in a grid ?

i want to build a datagrid that shows a picture and underneath it a name.
the problem is i dont want to see all of the pictures, but all the pictures that have certain requirements, so i cant just make one movie clip that includes all the pictures and names.
so my question is how do i build a movie clip that contains photo and text?.

You do not create movieclips on the timeline using code, though you can create them and add them as children of something that has been manually placed in the timeline.
To create a MovieClip using code you use:
    var mc:MovieClip = new MovieClip();
If you need to add an image, then however you intend to acquire the image, after it has been acquired, you add it to the MovieClip using:
    mc.addChild(img);
where img is the instance of whatever form of object the image takes (Bitmap, Loader)
If you need to add a TextField to the MovieClip then you use:
    var tf:TextField = new TextField();
    mc.addChild(tf);
and you can set up properties for the textfield such as the font and color and position as well after it has been instantiated (the first line).

Can i assign a child state to a movie clip that is already placed on stage

Hello
Is it possible to add a child state to a movie clip that is
already placed on stage,
i need to do this so i can move the movieclip to the top of
the display list.
thanks for the help
mt

"The objects i want it to appear above are loaded swf's onto
the same main stage."
Aha, this is where things can get confusing. The terminology
between the Flash Authoring tool and ActionScript is not
consistent.
In ActionScript, the Stage is the top most DisplayObject. You
probably get that.
In Flash, the canvas that is often referred to as "the stage"
is not the Stage object of ActionScript, rather the Flash stage is
a DisplayObject class called MainTimeline (or if you assign a
document class, it's that class), which is the first and only child
of the ActionScript Stage object. It's the only child unless, of
course, you add something else to the ActionScript Stage object at
runtime... like a loaded swf. ;)
So in other words, if you are doing anything like this:
stage.addChild(myLoadedSWF)
You are actually putting myLoadedSWF above the MainTimeline
object, which is the entire Flash timeline. There's nothing wrong
with that, but in this case it means changing the depth of things
inside the MainTimeline is not going to change the fact that the
MainTimeline itself is below myLoadedSWF.
Most likely the simplest solution is to add your loaded SWFs
to the property "root", not stage. root can refer to different
things in different places, but most of the time it refers to the
MainTimeline, and if I had to guess I would say it almost certainly
does in your case. Note that the "root" property is typed as a
DisplayObject, not a DisplayObjectContainer, so addChild (which is
a DisplayObjectContainer method) will not be recognized unless you
typecast to DisplayObjectContainer or a subclass of
DisplayObjectContainer, like Sprite or MovieClip:
MovieClip(root).addChild(myLoadedSWF)
Also note that, unlike AS2, in AS3 it's very easy to simply
add your loaded SWF below existing objects you create in Flash. You
can use addChildAt(obj,0) for instance to add it to the very
bottom.

Load all movie clips

Hi,
I have a "map_mc" movie clip that has over 500 movie clips(counties). I also have the countynames in xml format. I want to be able to
1. in a loop get a list of all movie clips
2. and in a dynamic text box assign the county name to the movie clip (from xml).
Is it possible to get the names of all movie clips and then assign the countynames?
I have the xml part semi working and on mouseover can display the name but is stuck on the movie clip part.
I am trying to avoid typing all the county names and in the future will be adding census and other data to the xml.
can someone help?

if you had an xmlList of 500 countynames, and if the 500 movieclips inside maps_mc each had names such as mc0, mc1, mc2, etc, you could loop thru them like this:
for(var i = 0; i < xmlList.length(); i++){
     //get reference to county movieclip
     var mc = maps_mc.getChildByName("mc" + i);
     //then add listeners
     mc.addEventListener(MouseEvent.ROLL_OVER, overMe);
     mc.addEventListener(MouseEvent.ROLL_OUT, outMe);
function overMe(e:MouseEvent){
     //the county you rolled over
     var mc = e.target;
     //extract the number from the name
     var n = Number(mc.name.substr(2));
     //use n to get countyname from xmlList
     var countyname = xmlList[n];
     trace(countyname);
     //now add countyname to a textField
     textField.text = countryname;
function outMe(e:MouseEvent){
     //clear textField
     textField.text = "";

If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

If you want both iPad to be identical .....
Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
Now connect your iPad to your Mac and start iTunes.
When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
Sync the iPad and eject it when it is complete.
Quit iTunes
Connect the second iPad.
Launch iTunes
Right click on the iPad name on the left side and select - Restore from Backup
Select the backup of the first iPad and let it restore from that backup.
When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
Eject the iPad when you are done.
Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

Trying to create a movie clip that Bounces off four sides of the stage

using the syntax below I have created a movie clip called 'BALL' that bounces off from the left "x" and moves to the right side of the stage 'x.520' and bounces back to the start "x".
HOW DO I CREATE A MOVIE CLIP THAT BOUNCES FOUR SIDES OF THE STAGE AND STOPS ON THE FOURTH BOUNCE??
var ballTween:Tween = new Tween(ball, "x", Bounce.easeInOut, ball.x,520, 5, true);
ballTween.addEventListener(TweenEvent.MOTION_FINISH,tweenFinishedF);
function tweenFinishedF(e:TweenEvent):void{
new Tween(ball,"x",Bounce.easeOut,ball.x,0,5,true);

Here is a simplest way to do that. This code doesn't use your ball but draws it dynamically. If you want to use your ball instance - replace relevant lines.
import flash.display.Shape;
import flash.display.Sprite;
import flash.events.Event;
import flash.geom.Rectangle;
var ball:Shape;
// speed, naturally
var speed:Number = 7;
// velocity along x
var vx:Number = speed;
// vlocity along y
var vy:Number = speed;
// area within which ball may move
var moveArea:Rectangle;
// radius of ball circle shape
var ballRadius:Number = 20;
init();
function init():void
    moveArea = new Rectangle(ballRadius, ballRadius, stage.stageWidth - ballRadius, stage.stageHeight - ballRadius);
    drawBall();
    addEventListener(Event.ENTER_FRAME, moveBall);
function moveBall(e:Event):void
    // change direction if ball moves out of allowed rectangle
    if (ball.x < moveArea.x)
        vx = speed;
    else if (ball.x > moveArea.width)
        vx = -speed;
    if (ball.y < moveArea.y)
        vy = speed;
    else if (ball.y > moveArea.height)
        vy = -speed;
    ball.x += vx;
    ball.y += vy;
function drawBall():void
    ball = new Shape();
    ball.graphics.beginFill(0xFF0000);
    ball.graphics.drawCircle(0, 0, ballRadius);
    ball.x = moveArea.x + Math.random() * moveArea.width;
    ball.y = moveArea.y + Math.random() * moveArea.height;
    addChild(ball);
Message was edited by: Andrei1

How to unglue clips that are stuck together in the timeline

I've looked everywhere, I'm sure it's there but I can not find how to "unglue" clips that are stuck together in the timeline. NOT break apart clip items, but get rid of those pesky things that attach the different levels of video together. And BTW what the heck are those little claws called?
Thank you so very very much in advance!

You can't move tracks. Everything in the timeline has to be connected to the primary storyline at some point. Each clip that's connected can be connected individually so it's free floating and the connection point can be moved anywhere you want, or the clips can be strung togother and connected at a single point. You can Opt-Cmd-click to change the connection to a new location, but it has to be connected somehow.

Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in. Can this be corrected?

Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in. Can this be corrected?

Howardok
Premiere Elements 11 on what computer operating system?
You should be able to right click the finished Instant Movie on the Timeline and select "Break Apart Instant Movie" to do just that.
Then open all the tracks, expand the Timeline with the -+ slider above the Timeline, and edit your Instant Movie.
Please review and consider. If you have questions or need clarification on the above, please do not hesitate to ask, but supply more details.
Thank you.
ATR

How can I load an external SWF into a movie clip that's inside other movie clip?

Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?

Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom

My iMac holds my main iTunes account. How do I find out a list of all the devices that are authorized from this computer?

My iMac holds my main iTunes account and it shows 4 devices are authorized to play iTunes. I can only name 3. How do I find out a list of all the devices that are authorized from this computer?

I don't believe this is possible, but you can deauthorize all your computers and start over if you are concerned.
See here
Best of luck

My ipad is no longer showing all my videos, even though i have the option set to show all, even those that are in my cloud. I can't do anything to get all my videos to re-appear. any help?

My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??

Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have numerous music movie clips that I have not purchased through iTunes, can I stream these "home" movies to apple TV? And if this is not possible, is there another complete program available that I can purchase to have my music movie clips stream to a

I have numerous music movie clips that I have not purchased through iTunes, Is it possible to stream these "home" movies using iTunes to apple TV?
And if iTunes will not allow it, is there another complete program available that I can purchase to have my music movie clips stream to a TV and/or another computer?
Any help would be appreciated. Thanks

Thanks, Winston C, I've actually tried everything you suggested. I'm thinking now that the Home Sharing problem likely is related to Bonjour--I've seen several people mention this with similar (but not identical) problems. The solution that seems to work for some people is to uninstall and reinstall Bonjour. Frankly, I don't want to go through the trouble given that the iOS 7 release is imminent.
One thing that I haven't tried is resetting the ATV to factory settings. I'll give that whirl.
Thanks for your advice!

Disabling all movie clips that are on lower levels

Similar Messages

Maybe you are looking for