Disabling further events until subVI closes
Hi All.
I'm having an issue regarding mouse down events that continuing to register altough another control is on top.
As can be seen in 1.vi attached
when I press the control "1" , subvi 2.vi opens, but if i continue to mouse down the control (on the same place) and then closing 2.vi I get that that 2.vo pops up again
It's like the String doesn't cover the 1 and 2 controls.
after pressing 1 or 2 and 2.vi pops I would like to disable further events until I stop 2.vi execution
Modal is not an option for me sue to graphics issues
I have also tried to "cover" 1 and 2 control with boolean but witout success.
Any ideas?
Thank you.
Solved!
Go to Solution.
Attachments:
1.vi 16 KB
2.vi 7 KB
KJmaster wrote:
I can't use modal because when u run a modal window it gets a 3d frame unlike float window who has a flat look.
I'm not seeing this at all. What settings were you using? Can you post a screenshot?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website.pop up blocker off & in safe mode. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work
O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons). -
Dear all,
I have a jlabel on which i perform a click and the embbeded image switch between start and stop image.
My problem consists in preventing from performing multiples click/or disabling mouse event while the application starts loading some parameters.
switchViewLabel.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
//it takes a long time
onSwitchViewButtonClick();
protected void onSwitchViewButtonClick() {
System.out.println("onSwitchViewButtonClick");
if (canGo) {
System.out.println("canGo");
canGo = false;
MainWindowPeer.getInstance().setCursorToWait();
//this action load parameter
CommandWindow.getInstance().switchView();
refreshSwitchViewButton();
MainWindowPeer.getInstance().setCursorToDefault();
canGo = true;
} But on my console i have noticed :
canGo
onSwitchViewButtonClick
canGo
onSwitchViewButtonClick
canGo.....
It looks like we store mouse event anywhere and for each event we execute onSwitchViewButtonClick code and consume event.(it seems to not be asynchronous)....
How to do ???
Thanks for any helps..Dear all,
yes i want to ignore mouse events until the processing is done.But how to perform process in separate thread and what is a semaphore.Is it possible to have much more explanation...
Shall i do following code..
mouseAdapter = new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
SwingUtilities.invokeLater(new Runnable(){
public void run() {
//switchViewLabel.removeMouseListener(mouseAdapter);
onSwitchViewButtonClick();
//switchViewLabel.addMouseListener(mouseAdapter);
};Thanks you in advance... -
The updater will not let me continue until I close ElementsAutoanalyzer.exe. I can't find such a file. As far as I know I am not running such a program. How do I continue?
Auto-Analyzer in Elements Organizer automatically detects and tags the following when analyzing media.
Auto analyzer is run as soon as you import media into Elements Organizer. When there is considerable media to analyze, run auto analyzer during the system’s idle time.
Face
Audio
Blur
Brightness and contrast
Motion
Shake
You can add additional tags manually after auto analysis. However, the Auto Analyzer tags can be removed from media, but you cannot edit/delete them from the smart tags list
In case you do not wish to run it just disable it from
Select Edit > Preferences > Media-Analysis (Windows), or Adobe Elements Organizer 11 > Preferences > Media-Analysis (Mac OS).
Deselect Analyze Media For Smart Tags Automatically.
For more info refer to help link http://help.adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 e91_WIN.html#WSeffff8bffc802084-7c67afd012a27e57cf2-8000
Hope it helps.
Thanks,
Garry -
I downloaded Macfee security and parental control. The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas
Make that four.
If you have any commercially advertised/available antivirus software installed on your Mac, completely uninstall this per the instructions on the AV developer's website.
Antivirus software can slow down the normal operation of OS X and can negatively affect OS X performance and operation.
Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
Plus, these type of apps aren't really necessary. They really aren't.
There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac.
Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
It is best to never, EVER download and install these types of apps.
The risk to your system and data is too great a risk!
Search the web to learn how to correctly and properly uninstall these kinds of apps.
They all uninstall differently. -
I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
Thanks. -
Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.
It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again. -
Can DISABLE preProcess Event Handler add to the Orchestration parameters?
I have a DISABLE pre-process event handler defined on the User object. I need to set the current date on a USR UDF attribute whenever the user is disabled or enabled or created. The CREATE handler works and the date value shows up on the user profile. However, when I try to set this attribute on the pre-process DISABLE or ENABLE event handlers, the new date does not show up. Here is the code I am using in my DISABLE/ENABLE event handler:
Date currentTime = new Date(System.currentTimeMillis());
orchestration.addParameter(USER_STATUS_DATETIME_ATTR_NAME, currentTime);
Where the orchestration object is from the execute() parameter list.
Any ideas as to why this is not working? Is adding to the orchestration not allowed for DISABLE or ENABLE event handlers? I know my handler is getting calls as I am logging the orchestration.getOperation() value.
Thanks for any suggestions.
-Dave
Edited by: user552098 on Nov 12, 2012 1:56 PMWhen you update the field, make sure you are using the field label name, and not the UDF value.
-Kevin -
How to disable the reminding dialog when close the webi report viewer
Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David ZhangI've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it. -
How can I disable the "Events" how can I disable "Faces"
buona sera
how can I disable the "Events"
how can I disable "Faces"
grazieYou can not
Events are one of many views or your photos in your library - as are faces
YOu can simply ignore both but you can disable them
LN -
I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email. Not sure what is happening our what if any emails are being sent.
You can install Temperature Monitor and have a look if the CPU oder GPU oder something else went to hot. The processor has a built in safety mechanism to shut down the computer before taking damage.
-
Firefox is crashing when I attempt to download a file. Everything works until I close Firefox and then attempt to re-open the browser then it crashes. I tried deleting the download file in my profile folder but it didn't work.
Downgrade to an older nightly that works for a week or so, then test again to see if the bug's still there. In the mean time, report the bug on Bugzilla if it hasn't already been. There's really nothing you can do about bugs in nightlies.
(A similar sort of bug that triggered 60 seconds after opening, every time, was what got me out of using nightlies as my main browser.) -
In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?
I have the same problem with lectures slides.
Furthermore, sometimes the text box, when doube-clicking, turns the text into a one-liner. Causing the text box to sometimes get 3. times wider than the pdf itself.
tcrother wrote:
... then when it rotates the text isn't visible and I'm stuck clicking on random parts of my lecture slides hoping the text box will come back. ...
By pressing [cmd + I] the Inspector opens up and clicking on the rightmost tab 'Annotations' you should be able find those Annotations again. I do this regularly to find the empty annotations I accidentally create while clicking through slides. -
Tab Limit Reached, Can't Open A New Tab Until You Close One.
How do I close the tabs?Asus doesn't make the iPad. Is this some other tablet?
Sounds like you have maxed out the browser windows. In the browser app, press the menu or overflow bottom to see if there is an window/tabs options. There you should see a thumbnail image of each tab you have opened and in the corner of each should be a X or minus symbol that you touch to close that tab/window. -
Disablying keyboard events in a JFrame.
Hello,
How is it possible to disable keyboard events for a specific JFrame and then (after a while) enable events again ?
thank you,
RamiLook at this program, events are send but you can't see the data in the fields.
import java.awt.*;
import java.awt.event.*;
public class Nok extends Frame
public Nok()
super();
setBounds(6,6,400,300);
addWindowListener(new WindowAdapter()
{ public void windowClosing(WindowEvent ev)
dispose();
System.exit(0);
setLayout(new GridLayout(4,0));
add(new TextField("this is a text field"));
add(new TextArea("this is a text area"));
add(new Button("this is a button"));
setVisible(true);
Toolkit.getDefaultToolkit().addAWTEventListener(new AWTEventListener()
{ public void eventDispatched(AWTEvent e)
System.out.println(""+e);
((KeyEvent)e).consume();
} ,AWTEvent.KEY_EVENT_MASK);
public static void main (String[] args)
new Nok();
Noah
import java.awt.*;
import java.awt.event.*;
public class Nok extends Frame
public Nok()
super();
setBounds(6,6,400,300);
addWindowListener(new WindowAdapter()
{ public void windowClosing(WindowEvent ev)
dispose();
System.exit(0);
setLayout(new GridLayout(4,0));
add(new TextField("this is a text field"));
add(new TextArea("this is a text area"));
add(new Button("this is a button"));
setVisible(true);
Toolkit.getDefaultToolkit().addAWTEventListener(new AWTEventListener()
{ public void eventDispatched(AWTEvent e)
System.out.println(""+e);
((KeyEvent)e).consume();
} ,AWTEvent.KEY_EVENT_MASK);
public static void main (String[] args)
new Nok();
Maybe you are looking for
-
Overflow in the operation:= error
Hi, I get the following error in my DTP of a process chain: Runtime error while executing rule -> see long text Diagnosis An error occurred while executing the transformation rule: The actual error message: Overflow in the operation := The error
-
When I type a site into the address bar,and hit enter for it to go,it won't go,it used to. now i have to hit the lil green arrow and it's really annoying =/ this just suddenly happened. and ive uninstalled and reinstalled firefox. help?
-
Open a default discoverer worksheet from Oracle Apps
Hi, We know how to create a form function link and attach it to a menu to open a discoverer workbook. But if the discoverer workbook has multiple worksheets, the form function link opens a intermediate page which shows the available worksheets in the
-
Adobe Air File Icon Transparency (OS-X)
Hi All, I am building a variation of Coverflow for a project at the moment, and have run into a snag. I am using getDirectoryListingAsync to get the files in a directory, and through the files array it returns, retrieve the icons. However on OS-X (no
-
8.01 install crashes because of amazon list add in.
I updated to 8.01 and in the error message I was getting it was due to a list added to the tool bar by an Amazon promotion. You add items from other websites to the list and some people win those items. I am sure millions have this. Anyways I could n