Disabling messages such as "joined Cluster"
Hi,
I'm writing command-line utilities to work with the caches, is there a way to disable or reduce the messages when connecting to the cluster, such as "joined Cluster with senior member"?
Thanks,
Harry
Harry,
The verboseness of the Coherence logging is controlled by the "logging-config/severity-level" configuration element in operational configuration descriptor and could be overridden either in a custom tangosol-coherence-override.xml descriptor or using the "tangosol.coherence.log.level" environment property. OOTB log level is set to 5; changing it to 3 will significantly reduce the amount of logging.
Regards,
Gene
Similar Messages
-
When do we get "asap mode disabled" message in IAP?
Q: When do we get "asap mode disabled" message in IAP?
A:
When the "Autojoin mode" is disabled on the master and when the new IAPs which are trying to join this cluster unable to join and will try to come up as master by throwing this message "asap mode disabled".
Solution: Enable "Auto join" mode or manually add the other IAP MAC address on the master such that those IAPs will come up as slave.
Console Output:
=============
<<<<< Welcome to the Access Point >>>>>
asap mode disabled :.
process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
asap mode disabled :.
asap mode disabled :.
asap mode disabled :.
asap_send_elected_master: sent successfully
wait for stm to initialize over
asap_send_elected_master: sent successfullyAssuming there is a legal issue, I hope this thread does not get deleted.
Regarding Audacity - it will not display the drop down menu as the driver itself disabled the stereo-mix. Re-enabing it using this patch will help.
However, I found the solution on a thread: http://forum.thinkpads.com/viewtopic.php?t=52527&start=60&sid=a136c428c5a38c58b573f3fa01c35d67
But basically, download the SoundMax driver from lenovo's website and extract it somewhere. Then open up ADIHDAUD.INF located in SMAXWDM folder in the driver folder.
Find the line HKR,AD1984\\Disable, OutR, 1, 01 ;; Disable Stereo Mix Capture Node
Change the "01" to 00 and save it
Run "setup" and select "uninstall" existing driver - reboot
Run "setup" and select "install" new driver - ignore the Windows XP auto install setting and ignore the "non certified" driver warning - reboot
Go to start menu > run > type: "regedit" [enter] (without quotes)
Click on "edit > search" and look for AD1984.
For each registry key/folder of AD1984, find the subfolder/key that says MicBP and OutR and change their associated binary values from 01 to 00. For some people, re-installing the driver in this fashion already produces a 00 while for others, the change must be made manually.
Reboot
Windows may give you an error that the SoundMax driver needs to be re-installed - this is NOT true. You need to only re-install the Windows XP hotfix to re-enable the universal audio architecture. This hotfix is available on the lenovo website here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68974
I do not know if this works for Windows Vista but it should would be happy to see if someone can try. Otherwise, XP users should be good to go!
Message Edited by singularity2006 on 02-13-2008 09:12 AM
MOD edit - converted to clickable link.
Message Edited by Mark_Lenovo on 04-17-2008 01:04 PM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro -
Node can not join cluster after RAC HA Testing
Dear forum,
We are performing RAC failover tests according to document "RAC System Test Plan Outline 11gR2, Version 2.0". In testcase #14 - Interconnect network failure (11.2.0.2 an higher), we have disabled private interconnect network of node node1 (OCR Master).
Then - as expected - node node2 was evicted. Now, after enabling private interconnect network on node node1, i want to start CRS again on node2. However, node does not join cluster with messages:
2012-03-15 14:12:35.138: [ CSSD][1113114944]clssgmWaitOnEventValue: after CmInfo State val 3, eval 1 waited 0
2012-03-15 14:12:35.371: [ CSSD][1109961024]clssnmvDHBValidateNCopy: node 1, node1, has a disk HB, but no network HB, DHB has rcfg 226493542, wrtcnt, 2301201, LATS 5535614, lastSeqNo 2301198, uniqueness 1331804892, timestamp 1331817153/13040714
2012-03-15 14:12:35.479: [ CSSD][1100884288]clssnmvDHBValidateNCopy: node 1, node1, has a disk HB, but no network HB, DHB has rcfg 226493542, wrtcnt, 2301202, LATS 5535724, lastSeqNo 2301199, uniqueness 1331804892, timestamp 1331817154/13041024
2012-03-15 14:12:35.675: [ CSSD][1080801600]clssnmvDHBValidateNCopy: node 1, node1, has a disk HB, but no network HB, DHB has rcfg 226493542, wrtcnt, 2301203, LATS 5535924, lastSeqNo 2301200, uniqueness 1331804892, timestamp 1331817154/13041364
Rebooting node2 did not help. Node1 which was online all the time (although private interconnect interface was unplugged for a few minutes and then plugged back in). I suppose that if we reboot node2, the problem will disappear. But there should be solution, which keeps availability requirements.
Setup:
2 Nodes (OEL5U7, UEK)
2 Storages
Network bonding via Linux bonding
GI 11.2.0.3.1
RDBMS 11.1.0.7.10
Any ideas?
Regards,
MartinI have found a solution myself:
[root@node1 trace]# echo -eth3 > /sys/class/net/bond1/bonding/slaves
[root@node1 trace]# echo -eth1 > /sys/class/net/bond1/bonding/slaves
[root@node1 trace]# echo +eth1 > /sys/class/net/bond1/bonding/slaves
[root@node1 trace]# echo +eth3 > /sys/class/net/bond1/bonding/slaves
Now node2 is automatically joining the cluster.
Regards,
martin -
Node does not join cluster upon reboot
Hi Guys,
I have two servers [Sun Fire X4170] clustered together using Solaris cluster 3.3 for Oracle Database. They are connected to a shared storage which is Dell Equallogic [iSCSI]. Lately, I have ran into a weird kind of a problem where as both nodes come up fine and join the cluster upon reboot; however, when I reboot one of nodes then any of them does not join cluster and shows following errors:
This is happening on both the nodes [if I reboot only one node at a time]. But if I reboot both the nodes at the same time then they successfully join the cluster and everything runs fine.
Below is the output from one node which I rebooted and it did not join the cluster and puked out following errors. The other node is running fine will all the services.
In order to get out of this situation, I have to reboot both the nodes together.
# dmesg output #
Apr 23 17:37:03 srvhqon11 ixgbe: [ID 611667 kern.info] NOTICE: ixgbe2: link down
Apr 23 17:37:12 srvhqon11 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(5) unable to connect to target SENDTARGETS_DISCOVERY
Apr 23 17:37:12 srvhqon11 iscsi: [ID 114404 kern.notice] NOTICE: iscsi discovery failure - SendTargets (010.010.017.104)
Apr 23 17:37:13 srvhqon11 iscsi: [ID 240218 kern.notice] NOTICE: iscsi session(9) iqn.2001-05.com.equallogic:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk online
Apr 23 17:37:13 srvhqon11 scsi: [ID 583861 kern.info] sd11 at scsi_vhci0: unit-address g6090a0887073cf961b0ae505000030ef: g6090a0887073cf961b0ae505000030ef
Apr 23 17:37:13 srvhqon11 genunix: [ID 936769 kern.info] sd11 is /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef
Apr 23 17:37:13 srvhqon11 scsi: [ID 243001 kern.info] /scsi_vhci (scsi_vhci0):
Apr 23 17:37:13 srvhqon11 /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef (sd11): Command failed to complete (3) on path iscsi0/[email protected]:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk0001,0
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 122153 daemon.warning] svc:/network/iscsi/initiator:default: Method or service exit timed out. Killing contract 41.
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 636263 daemon.warning] svc:/network/iscsi/initiator:default: Method "/lib/svc/method/iscsid start" failed due to signal KILL.
Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 748625 daemon.error] network/iscsi/initiator:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
Apr 24 14:50:16 srvhqon11 svc.startd[11]: [ID 694882 daemon.notice] instance svc:/system/console-login:default exited with status 1
root@srvhqon11 # svcs -xv
svc:/system/cluster/loaddid:default (Oracle Solaris Cluster loaddid)
State: offline since Tue Apr 23 17:46:54 2013
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: /var/svc/log/system-cluster-loaddid:default.log
Impact: 49 dependent services are not running:
svc:/system/cluster/bootcluster:default
svc:/system/cluster/cl_execd:default
svc:/system/cluster/zc_cmd_log_replay:default
svc:/system/cluster/sc_zc_member:default
svc:/system/cluster/sc_rtreg_server:default
svc:/system/cluster/sc_ifconfig_server:default
svc:/system/cluster/initdid:default
svc:/system/cluster/globaldevices:default
svc:/system/cluster/gdevsync:default
svc:/milestone/multi-user:default
svc:/system/boot-config:default
svc:/system/cluster/cl-svc-enable:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/system/basicreg:default
svc:/system/zones:default
svc:/system/cluster/sc_zones:default
svc:/system/cluster/scprivipd:default
svc:/system/cluster/cl-svc-cluster-milestone:default
svc:/system/cluster/sc_svtag:default
svc:/system/cluster/sckeysync:default
svc:/system/cluster/rpc-fed:default
svc:/system/cluster/rgm-starter:default
svc:/application/management/common-agent-container-1:default
svc:/system/cluster/scsymon-srv:default
svc:/system/cluster/sc_syncsa_server:default
svc:/system/cluster/scslmclean:default
svc:/system/cluster/cznetd:default
svc:/system/cluster/scdpm:default
svc:/system/cluster/rpc-pmf:default
svc:/system/cluster/pnm:default
svc:/system/cluster/sc_pnm_proxy_server:default
svc:/system/cluster/cl-event:default
svc:/system/cluster/cl-eventlog:default
svc:/system/cluster/cl-ccra:default
svc:/system/cluster/ql_upgrade:default
svc:/system/cluster/mountgfs:default
svc:/system/cluster/clusterdata:default
svc:/system/cluster/ql_rgm:default
svc:/system/cluster/scqdm:default
svc:/application/stosreg:default
svc:/application/sthwreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/system/cluster/scvxinstall:default
svc:/system/cluster/sc_failfast:default
svc:/system/cluster/clexecd:default
svc:/system/cluster/sc_pmmd:default
svc:/system/cluster/clevent_listenerd:default
svc:/application/print/server:default (LP print server)
State: disabled since Tue Apr 23 17:36:44 2013
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
svc:/network/iscsi/initiator:default (?)
State: maintenance since Tue Apr 23 17:46:54 2013
Reason: Restarting too quickly.
See: http://sun.com/msg/SMF-8000-L5
See: /var/svc/log/network-iscsi-initiator:default.log
Impact: This service is not running.
######## Cluster Status from working node ############
root@srvhqon10 # cluster status
=== Cluster Nodes ===
--- Node Status ---
Node Name Status
srvhqon10 Online
srvhqon11 Offline
=== Cluster Transport Paths ===
Endpoint1 Endpoint2 Status
srvhqon10:igb3 srvhqon11:igb3 faulted
srvhqon10:igb2 srvhqon11:igb2 faulted
=== Cluster Quorum ===
--- Quorum Votes Summary from (latest node reconfiguration) ---
Needed Present Possible
2 2 3
--- Quorum Votes by Node (current status) ---
Node Name Present Possible Status
srvhqon10 1 1 Online
srvhqon11 0 1 Offline
--- Quorum Votes by Device (current status) ---
Device Name Present Possible Status
d2 1 1 Online
=== Cluster Device Groups ===
--- Device Group Status ---
Device Group Name Primary Secondary Status
--- Spare, Inactive, and In Transition Nodes ---
Device Group Name Spare Nodes Inactive Nodes In Transistion Nodes
--- Multi-owner Device Group Status ---
Device Group Name Node Name Status
=== Cluster Resource Groups ===
Group Name Node Name Suspended State
ora-rg srvhqon10 No Online
srvhqon11 No Offline
nfs-rg srvhqon10 No Online
srvhqon11 No Offline
backup-rg srvhqon10 No Online
srvhqon11 No Offline
=== Cluster Resources ===
Resource Name Node Name State Status Message
ora-listener srvhqon10 Online Online
srvhqon11 Offline Offline
ora-server srvhqon10 Online Online
srvhqon11 Offline Offline
ora-stor srvhqon10 Online Online
srvhqon11 Offline Offline
ora-lh srvhqon10 Online Online - LogicalHostname online.
srvhqon11 Offline Offline
nfs-rs srvhqon10 Online Online - Service is online.
srvhqon11 Offline Offline
nfs-stor-rs srvhqon10 Online Online
srvhqon11 Offline Offline
nfs-lh-rs srvhqon10 Online Online - LogicalHostname online.
srvhqon11 Offline Offline
backup-stor srvhqon10 Online Online
srvhqon11 Offline Offline
cluster: (C383355) No response from daemon on node "srvhqon11".
=== Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d1 srvhqon10 Ok
/dev/did/rdsk/d2 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d3 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d4 srvhqon10 Ok
/dev/did/rdsk/d5 srvhqon10 Fail
srvhqon11 Unknown
/dev/did/rdsk/d6 srvhqon11 Unknown
/dev/did/rdsk/d7 srvhqon11 Unknown
/dev/did/rdsk/d8 srvhqon10 Ok
srvhqon11 Unknown
/dev/did/rdsk/d9 srvhqon10 Ok
srvhqon11 Unknown
=== Zone Clusters ===
--- Zone Cluster Status ---
Name Node Name Zone HostName Status Zone Status
Regards.check if your global devices are mounted properly
#cat /etc/mnttab | grep -i global
check if proper entries are there on both systems
#cat /etc/vfstab | grep -i global
give output for quoram devices .
#scstat -q
or
#clquorum list -v
also check why your scsi initiator service is going offline unexpectedly
#vi /var/svc/log/network-iscsi-initiator:default.log -
When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
turn wi-fi off and on again
did a hard restart of my iPad
reset network connections back to factory settings
verified wi-fi is working as my computer accesses internet without issue.
verified that my software is up to date.
Does anyone have more suggestions?Couple of suggestions.
First, many companies have a gateway on their networks that block non approved devices. I work in such a place. You might check with an IT guy , and see if they have a block in place.
Second, the message you are getting means that you have not negotiated the security settings. So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
Again, if you can find one, talk to an IT guy and see if he has some suggestions. -
Coherence.jar in EAR - ejbmodule error while joining cluster senior member
Hi
We are trying to package coherence in EAR to connect to JMS queue. The ejb MDB module when a message is received process the data and tries to connect to coherence cluster members - Looking at the following log - right coherence config file/override/pof are picked however while this new member join DistributedService - it fails.
The senior member has 13001 partition, backup count 1. Both MDB module , coherence cluster use the same cache-config file.
Can someone help me in this regard.
Thanks
sunder
2011-10-12 11:18:05.351/2523.753 Oracle Coherence GE 3.7.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded cache configuration from "file:/data/blazecache/config/SDR-Cache-config.xml"
2011-10-12 11:18:05.980/2524.382 Oracle Coherence GE 3.7.0.0 <D4> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): TCMP bound to /10.160.57.138:8092 using SystemSocketProvider
2011-10-12 11:18:06.211/2524.613 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=41
2011-10-12 11:18:06.211/2524.613 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 19
2011-10-12 11:18:06.538/2524.940 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
2011-10-12 11:18:06.539/2524.941 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
2011-10-12 11:18:06.553/2524.955 Oracle Coherence GE 3.7.0.0 <Info> (thread=Cluster, member=n/a): This Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "sdrcluster_dev.dell.com" with senior Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2011-10-12 11:18:06.593/2524.995 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=2, Timestamp=2011-10-12 09:43:35.556, Address=10.160.57.138:14003, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6989,member:BlazeCacheExtendServerDEV01_1, Role=WeblogicWeblogicCacheServer) joined Cluster with senior member 1
2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=3, Timestamp=2011-10-12 09:43:35.983, Address=10.160.57.138:14005, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:7034,member:BlazeCacheServerDEV01_2, Role=WeblogicWeblogicCacheServer) joined Cluster with senior member 1
2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=6, Timestamp=2011-10-12 10:36:33.614, Address=10.160.57.138:8088, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
2011-10-12 11:18:06.595/2524.997 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member(Id=8, Timestamp=2011-10-12 10:42:51.491, Address=10.160.57.138:8090, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer) joined Cluster with senior member 1
2011-10-12 11:18:06.652/2525.054 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Cluster with senior member 1
2011-10-12 11:18:06.653/2525.055 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
2011-10-12 11:18:06.653/2525.055 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache1 with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Cluster with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Management with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache1 with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 2 joined Service ExtendTcpProxyService with senior member 2
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Cluster with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service Management with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 3 joined Service DistributedCache1 with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Cluster with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 6 joined Service Management with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 8 joined Service Cluster with senior member 1
2011-10-12 11:18:06.654/2525.056 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=n/a): Member 8 joined Service Management with senior member 1
2011-10-12 11:18:06.661/2525.063 Oracle Coherence GE 3.7.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Started cluster Name=sdrcluster_dev.dell.com
WellKnownAddressList(Size=1,
WKA{Address=10.160.57.138, Port=14001}
MasterMemberSet
ThisMember=Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
OldestMember=Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer)
ActualMemberSet=MemberSet(Size=6, BitSetCount=2
Member(Id=1, Timestamp=2011-10-12 09:43:00.859, Address=10.160.57.138:14001, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6992,member:BlazeCacheServerDEV01_1, Role=WeblogicWeblogicCacheServer)
Member(Id=2, Timestamp=2011-10-12 09:43:35.556, Address=10.160.57.138:14003, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:6989,member:BlazeCacheExtendServerDEV01_1, Role=WeblogicWeblogicCacheServer)
Member(Id=3, Timestamp=2011-10-12 09:43:35.983, Address=10.160.57.138:14005, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:7034,member:BlazeCacheServerDEV01_2, Role=WeblogicWeblogicCacheServer)
Member(Id=4, Timestamp=2011-10-12 11:18:06.332, Address=10.160.57.138:8092, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
Member(Id=6, Timestamp=2011-10-12 10:36:33.614, Address=10.160.57.138:8088, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
Member(Id=8, Timestamp=2011-10-12 10:42:51.491, Address=10.160.57.138:8090, MachineId=12174, Location=site:us.dell.com,machine:austeochr01,process:8703, Role=WeblogicServer)
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0, BitSetCount=0
TcpRing{Connections=[3, 8]}
IpMonitor{AddressListSize=0}
2011-10-12 11:18:06.741/2525.143 Oracle Coherence GE 3.7.0.0 <D5> (thread=Invocation:Management, member=4): Service Management joined the cluster with senior service member 1
2011-10-12 11:18:06.750/2525.152 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member 4 joined Service Management with senior member 1
2011-10-12 11:18:06.751/2525.153 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member 4 joined Service Management with senior member 1
2011-10-12 11:18:07.299/2525.701 Oracle Coherence GE 3.7.0.0 <Info> (thread=DistributedCache:DistributedCache1, member=4): Loaded POF configuration from "file:/data/blazecache/config/SDR-coherence-pof-config.xml"
2011-10-12 11:18:07.306/2525.708 Oracle Coherence GE 3.7.0.0 <Info> (thread=DistributedCache:DistributedCache1, member=4): Loaded included POF configuration from "zip:/data/oracle/middleware/user_projects/domains/BlazeDEV/servers/BlazeJMS/tmp/_WL_user/BlazeMDBEAR/1pwed8/APP-INF/lib/coherence.jar!/coherence-pof-config.xml"
2011-10-12 11:18:07.382/2525.784 Oracle Coherence GE 3.7.0.0 <D5> (thread=DistributedCache:DistributedCache1, member=4): Service DistributedCache1 joined the cluster with senior service member 1
2011-10-12 11:18:07.454/2525.856 Oracle Coherence GE 3.7.0.0 <Warning> (thread=DistributedCache:DistributedCache1, member=4): This node is configured with a 'partition-count' value of 257, but the service senior is using a value of 13001; overriding the local configuration.
2011-10-12 11:18:07.455/2525.857 Oracle Coherence GE 3.7.0.0 <Warning> (thread=DistributedCache:DistributedCache1, member=4): This node is configured with a 'backup-count' value of 1, but the service senior is using a value of 0; overriding the local configuration.
2011-10-12 11:18:07.456/2525.858 Oracle Coherence GE 3.7.0.0 <Error> (thread=DistributedCache:DistributedCache1, member=4): Incompatible KeyAssociator implementation: this node is configured to use com.tangosol.net.partition.DefaultKeyAssociator, but the service senior is using com.dell.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator; stopping the service.
2011-10-12 11:18:07.466/2525.868 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=6): Member 4 left service DistributedCache1 with senior member 1
2011-10-12 11:18:07.467/2525.869 Oracle Coherence GE 3.7.0.0 <D5> (thread=Cluster, member=8): Member 4 left service DistributedCache1 with senior member 1
2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <D5> (thread=DistributedCache:DistributedCache1, member=4): Service DistributedCache1 left the cluster
2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <Error> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=4): Error while starting service "DistributedCache1": java.lang.RuntimeException: Failed to start Service "DistributedCache1" (ServiceState=SERVICE_STOPPED)
2011-10-12 11:18:07.477/2525.879 Oracle Coherence GE 3.7.0.0 <Error> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=4): at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:1102)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:934)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:916)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:1293)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:294)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:181)
at com.dell.it.services.sdr.blazeinc.util.CustomerProductUpdate.recordExists(CustomerProductUpdate.java:267)
at com.dell.it.services.sdr.blazeinc.util.CustomerProductUpdate.insert(CustomerProductUpdate.java:222)
at com.dell.it.services.sdr.blazeinc.util.DataMapperUtility.mapToBean(DataMapperUtility.java:260)
at com.dell.it.services.sdr.blazeinc.util.DataMapperUtility.mapToBean(DataMapperUtility.java:119)
at com.dell.it.services.sdr.blazeinc.listener.BlazeMDB.onMessage(BlazeMDB.java:53)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)The KeyAssociator implementation is MDB classpath as well.
Here is the configuration override config
===========
<coherence>
<cluster-config>
<member-identity>
<cluster-name system-property="tangosol.coherence.cluster">sdrcluster_dev.XX.com</cluster-name>
</member-identity>
<unicast-listener>
<!-- This set of well-known-addresses creates a cluster with two nodes -->
<well-known-addresses>
<!-- Each server in the cluster must have a unique <socket-address> id -->
<socket-address id="austeochr01.us.XX.com">
<address>austeochr01.us.XX.com</address>
<port>14001</port>
</socket-address>
</well-known-addresses>
</unicast-listener>
<shutdown-listener>
<enabled system-property="tangosol.coherence.shutdownhook">false</enabled>
</shutdown-listener>
<service-guardian>
<timeout-milliseconds system-property="tangosol.coherence.guard.timeout">360000</timeout-milliseconds>
</service-guardian>
</cluster-config>
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value system-property="tangosol.coherence.cacheconfig">/data/blazecache/config/SDR-Cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
</coherence>
Here is the Cache config
=========
<?xml version="1.0" encoding="UTF-8"?>
<cache-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-cache-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-cache-config/coherence-cache-config.xsd">
<caching-scheme-mapping>
<cache-mapping>
<cache-name>blaze-local-*</cache-name>
<scheme-name>blaze-local</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>blaze-distributed-ASSET_HEADER_DATA</cache-name>
<scheme-name>blaze-distributed-AssetHeaderData</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>blaze-distributed-ENTITLEMENT_SUMMARY_DATA</cache-name>
<scheme-name>blaze-distributed-EntitlementSummaryData</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<local-scheme>
<scheme-name>blaze-local</scheme-name>
<expiry-delay>0</expiry-delay>
</local-scheme>
<distributed-scheme>
<scheme-name>blaze-distributed-AssetHeaderData</scheme-name>
<service-name>DistributedCache1</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>/data/blazecache/config/SDR-coherence-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<thread-count>40</thread-count>
<backup-count>0</backup-count>
<backup-storage>
<flashjournal-scheme />
</backup-storage>
<key-associator>
<class-name>com.XX.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator</class-name>
</key-associator>
<partition-count>13001</partition-count>
<task-hung-threshold>360000</task-hung-threshold>
<task-timeout>360000</task-timeout>
<backing-map-scheme>
<partitioned>true</partitioned>
<read-write-backing-map-scheme>
<scheme-name>DBCacheLoaderScheme</scheme-name>
<internal-cache-scheme>
<local-scheme>
<expiry-delay>0</expiry-delay>
<high-units>3</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1073741824</unit-factor>
</local-scheme>
</internal-cache-scheme>
<read-only>true</read-only>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>blaze-distributed-EntitlementSummaryData</scheme-name>
<service-name>DistributedCache1</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>/data/blazecache/config/SDR-coherence-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<key-associator>
<class-name>com.XX.it.services.sdr.blazeload.partaffinity.BlazeCacheKeyAssociator</class-name>
</key-associator>
<thread-count>40</thread-count>
<backup-count>1</backup-count>
<backup-storage>
<flashjournal-scheme />
</backup-storage>
<partition-count>13001</partition-count>
<task-hung-threshold>360000</task-hung-threshold>
<task-timeout>360000</task-timeout>
<backing-map-scheme>
<partitioned>true</partitioned>
<read-write-backing-map-scheme>
<scheme-name>DBCacheLoaderScheme</scheme-name>
<internal-cache-scheme>
<local-scheme>
<expiry-delay>0</expiry-delay>
<high-units>3</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1073741824</unit-factor>
</local-scheme>
</internal-cache-scheme>
<read-only>true</read-only>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<proxy-scheme>
<service-name>ExtendTcpProxyService</service-name>
<thread-count>5</thread-count>
<acceptor-config>
<tcp-acceptor>
<local-address>
<address system-property="tangosol.coherence.session.proxy.localhost"></address>
<port system-property="tangosol.coherence.session.proxy.localport"></port>
</local-address>
</tcp-acceptor>
</acceptor-config>
<task-hung-threshold>360000</task-hung-threshold>
<task-timeout>360000</task-timeout>
<proxy-config>
<cache-service-proxy>
<enabled>true</enabled>
</cache-service-proxy>
<invocation-service-proxy>
<enabled>true</enabled>
</invocation-service-proxy>
</proxy-config>
<autostart system-property="tangosol.coherence.session.proxy"></autostart>
</proxy-scheme>
<class-scheme>
<scheme-name>default-backing-map</scheme-name>
<class-name>com.tangosol.util.SafeHashMap</class-name>
</class-scheme>
</caching-schemes>
</cache-config>
Thanks
sunder -
IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?
I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.
-
Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?
I would think that image size would always be available when there is an active document in Photoshop. The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix. During those five month messages like that that should not have happen were common when action switch between documents. Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
Are you by some chance using CS6 version 13.0 CS6 without any updates. Use Photoshop menu Help>About Photoshop. If it shows CS6 version 13.0 you need to update CS6. . -
I just returned from Europe and my ipad will not join my home WiFi network. It keeps giving me the message "Unable to join the network" Any ideas?
I turned off my airplane mode."That was Easy!" Thanks!
-
Hi ,
I have a message area and i had linked the "Enable" property of the message area to the context attribute , even if i set the Contex attribute to TRUE the message is still disabled , can some one explain me how to disable message area by linking to the context attribute.
Regards,
Ravi.HI Shriram,
Let me explain my problem . I have two tabs in my tab strip control and each tab has its own message area , but the problem is when 2nd tab is selected and if i raise some exception is doesnt show in the message area of the 2nd tab as it is taking the first tab message area as default , so i had put the following logic in the modifyview.
<b>if(selectedTab.equals("Tab1"))
IWDMessageArea Tab2MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
Tab2MsgArea.setEnabled(false);
IWDMessageArea Tab1MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
Tab1MsgArea .setEnabled(true);
else
IWDMessageArea Tab2MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
Tab2MsgArea.setEnabled(true);
IWDMessageArea Tab1MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
Tab1MsgArea .setEnabled(false);
}</b>
This logic is working fine for most of the cases , but When i selcect a TAB, in the event handler of the selection, i am performing some logic and raising exceptions, for these exceptions it is not working fine as my event handler is fired first before the "WDModifyView" . Is there any other way to control the "ENABLE" property of the MessageAreas. -
Re: join cluster table into transperant table in ABAP Queries
Hi gurus
How to join cluster tables into transperant tables in ABAP Queries,
I want to join KNA1, KNB2, BSEG(cluster table)
pls explain me
amkHi
You can use join for KNA1 and KNB1 which will much faster
then use for all entries of this itab to get the BSEG to improve the performance
here you need to do some trial and error method by joining removing the tables and also for all entries
regards
Shiva -
Apple id account disabled message
I changed my password and still keep getting my account has been disabled message...WHy
http://appleid.apple.com/
Or you might have to contact Apple Support -
After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank yo
Try power-cycling your wireless router (unplg for 30 seconds, plug back in). Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.
-
How to disable message in HRTIM_ABS_REQ
Whenever an employee books a vacation in ESS, the warning message "Absence cannot be partial-day, so clock times have been removed". I know this is stored in HRTIM_ABS_REQ but how can this be disabled?
Thanks in advanceCould you please share the steps to disable messages in HRTIM_ABS_REQ ? I am facing similar problem, when i raise Travel Request through PTARQ, I get the following msg: "Document created with information: HRTIM_ABS_REQ 113 Approver not available --> Forward to Substitute"
I wish to disable these messages. -
How to disable message ringtone while i'm talking
how to disable message ringtone while i'm talking?
Engage the mute switch. It's the little slider over the volume buttons.
Maybe you are looking for
-
Mass update of Item category in Sale order
Hi all, Kindly guide me to do the mass updating of item category in a sale order. I want to update the item category of all the items in a sale order. User will be giving large number of sale orders as an input. How to proceed to achieve
-
PDF PRINTING using Apache FOP and Oracle Containers for J2EE
Hi, I am having major confusion about the pdf printing in Oracle XE and Apex 3.1.2.00.02 It clearly states that this is an available option on the Oracle website. According to Apex there are two options for printing report regions. Standard - which i
-
Hello, I have a problem with ExchangeServiceBinding.CreateAttachment(...) method (EWS with Office 365) When I try to add a small attachment (e.g. 5 MB), then the method works fine. When I try to add a big attachment (e.g. 12 MB), then the following e
-
FTP Transport Method in Data Services SAP Applications Datastore
Hi, We have SAP ECC and we are trying to install Rapidmarts for SD and Finance.When we try to run the Rapidmart Job.. We are getting the error Error opening the file c:\temp\billingblock.daa We are using FTP transport method as our SAP servers are U
-
How to Parallax Scrolling to adobe muse ?
I am starting working with adobe muse these days and i really liked the Parallax Scrolling. BUt my muse is not showing it in effect option. Please help me out how i can include that feature in my muse. Thanks