Disabling Selection screen control on selection od Radio button

Hi ,
I am having four controls on the selection screen of which 2 are radio button .Is it possible to hide or disable one control at the click of one radio button.
If yes , pls tell me the method.
Thanks n Regards
Manik L Dhakate

Hi
See the sample programs and do accordingly
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
                        user-command chk,
            p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
                s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_rad1 = 'X'
      AND screen-group1 = 'D2'.
      screen-active = '0'.
    ENDIF.
    IF p_rad2 = 'X'
     AND screen-group1 = 'D1'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Reward points for useful Answers
Regards
Anji

Similar Messages

Changing the Selection Screen on the selection of a radio button

Hi experts,
I am stuck with a situation here.
I have a selection screen with 2 blocks.
The first block contains 5 radio buttons.
The second block contains 7 select options fields.
Now i want to show different select options when the user selects different radio buttons.
For example, when the user selects radio button 1, select options 1, 2, 3, 4, and 5 should be shown.
When the user selects radio button2, select options 3, 4, 5, 6, and 7 should be shown.
How do i go about implementing this????
I guess i need to do the coding in event "AT SELECTION-SCREEN OUTPUT".
Should i use MODIF ID????
Please help.
Points will be awarded.
Thanks and Regards
Gaurav Kumar Raghav

Use AT SELECTION-SCREEN
not AT SELECTION-SCREEN OUTPUT.
cause output addition makes it a PBO not PAI
check ur requirement & use the events accordingly
group all select options under one group which you want to show on selection of radio button
under AT SELECTION-SCREEN
loop at screen and change the property "ACTIVE (0/1)" for the group you want
& don't forget to modify screen table in the end.
one more thing u should do is use addition USER-COMMAND with your radio buttons.
PARAMETERS : r1 RADIOBUTTON GROUP r1 USER-COMMAND f1,
             r2 RADIOBUTTON GROUP r1.
PARAMETERS : p1 TYPE c MODIF ID a,
             p2 TYPE c MODIF ID b.
AT SELECTION-SCREEN . " output
LOOP AT SCREEN .
    IF r2 = 'X' AND screen-name = 'P1'.
      screen-active = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Edited by: mrugesh phatak on Oct 8, 2008 11:00 AM

How to replace the existing selection screen with new selection screen

Hi,
I have first selection screen with parametre as a table name, then I have created dynamic selection screen as 2nd selection screen with different fields of that table as select options. This is done using genaration of dynamic report. Now If I click on button on this 2nd selction screen , then I want to replace this 2nd dynamic selection screen , with the other selection screen fields.
Can anybody guide me, How to do replace one slection screen with different selection screen.
and one imp thing is this selction screen is populating with dynamic fields on it.
Regards,
Mrunal

As I can understand you want to make some of the screen field to disable or visible on screen depending upon the interaction of user with screen 1.
You may use this example code in PBO of screen 2.
LOOP AT SCREEN.
    " action has been taken to modify the area office screen as per the option chosen at screen 99.
    CASE ACTION.
        " if the user has taken up the option of UPLOAD
      WHEN 'UP'.     " screen processing while we upload the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'DN'.      " screen processing while we upload the approved plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_UP' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'VW'.      " screen processing while we view the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'RLGRAP-FILENAME' OR SCREEN-NAME = 'FNAME'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
        " and hide the file input field
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_UP'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDCASE.
ENDLOOP.

Difference between At selection-screen and At selection-screen field

I need to know the difference between
Difference between At selection-screen and At selection-screen field
Regards
Shashi

Hi,
AT SELECTION-SCREEN is the event triggered in the PAI of the selection screen.
AT SELECTION-SCREEN on field field_name is the event specific to the field and is triggered when u press enter in that field.
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
SELECTION-SCREEN FIELD SELECTION
FOR {NODE|TABLE} node [ID id].
Effect
This statement defines a node node in the structure of the logical database for field selection. If a node belongs to type T, you can use the TABLE addition instead of NODE. The statement cannot be used for type C nodes. .
If a node is defined for field selection, you can use an executable program linked to the logical database in the GET statement to control which fields in the node are to be read by the logical database. If you use the function module LDB_PROCESS, the FIELD_SELECTION parameter must be specified accordingly.
for more details check this link...
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka.

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Read
https://discussions.apple.com/message/15659267#15659267

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

Is there any way programmatically to disable the screen shot capture using Home power button in the iPad device?

Hi Team,
Is there any way programmatically to disable the screen shot capture using Home + power button in the iPad device.We need to avoid the screen capture option due to security reason.
thanks ,
Bala

Hi Peace, Clyde,
Thanks for information. Using the API UIApplicationUserDidTakeScreenhotNotification (iOS7) send the notification after the screenshot taken. Using this api is it possible to block the screen shot caputure option.
Thanks and Regards,
Bala

Selection screen control for a field in the report painter report

Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

Query related to at selection screen event & at selection-screen output

Hi all,
thanks in advance
i have two radio buttons say rd1 & rd2
on my selection screen i have date,period,year and these fields r mandatory fields
when i try to select the radio button rd2 then it is not disabling the fields period and year rather it is checking the fields for mandatory and vicevesr
here is the code plz help me out
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF rd1 = 'X'.
      IF screen-group1 = 'GR1'.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
    IF rd2 = 'X'.
      IF screen-group1 = 'GR2'.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
blank period is not allowed
    IF monat[] IS INITIAL.
      MESSAGE e008.
    ENDIF.
blank fiscal year is not allowed
    IF gjahr[] IS INITIAL.
      MESSAGE e009.
    ENDIF.
blank document date is not allowed
    IF bldat[] IS INITIAL.
      MESSAGE e020.
    ENDIF.
awiting for all u r replies

I UNDERSTOOD Y U HAVE GIVE ERROR MESSAGE,
WHEN U R DECLARING THE VALUES AS OBLIGATORY BEFORE, THEN NO NEED TO GIVE MESSAGES IN AT SELECTION SCREEN.
BUT BASED ON SOME CONDITIONS, IF U WANT TO MAKE THEM OBLIGATORY DYNAMICALLY THEN GIVE THE CONDITION ALSO
EXAMPLE
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF a = 'X'.
      IF screen-group1 = 'GR2'.
        screen-input = 0.
             ELSE.
       SCREEN-INPUT = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
    IF c = 'X'.
      IF screen-group1 = 'GR1'.
        screen-input = 0.
     ELSE.
       SCREEN-INPUT = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF d is initial.
MESSAGE e009.
ENDIF.
start-of-selection.
write b.
2ND EXAMPLE:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF a = 'X'.
      IF screen-group1 = 'GR2'.
        screen-input = 0.
             ELSE.
       SCREEN-INPUT = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
    IF c = 'X'.
      IF screen-group1 = 'GR1'.
        screen-input = 0.
     ELSE.
       SCREEN-INPUT = 1.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF B = 5 AND d is initial.
MESSAGE e009.
ENDIF.
start-of-selection.
write b.
I HAVE SENT U TWO EXAMPLES, IN THE SEOND EXMAPLE, IT WORKS FINE AS U HAVE GIVEN SOME OTHER CONDITION.
IN THE FIRST EXAMPLE, AS IT WILL NOT WORK AS IAM CHECKING ONLY INITIAL CONDITION.
FOR CHECKING ONLY INITIAL CONDITION, NO NEED TO WRITE IT AT SELECTION SCREEN , U CAN DIRECTLY DECLARE AS OBLIGATORY IN THE BEGINING IT SELF.
JUST COPY AND PASTE MY TWO PROGRAMS AND FIND OUT THE DIFFERENCE IAM EXPLAINING
Message was edited by: Hymavathi Oruganti

How to go from one selection screen to another selection screen?

Hi,
I am developing a report in that i want to display date and customer number in first selection screen.
After executing that program selection query is executed its select invoice number from data dictionary table and display invoice number as a radio button on selection screen 2.

Hello Kamlesh,
As per my understanding of your requirement, we can acheive your requirement by creating 2 program.
1st program selection screen with Customer number and Date and excecute the program and fetch the invoice number.
Then Use SUBMIT statement in your 1st program and call the 2nd program using the selection screen.
syntax:
SUBMIT ZREPORT2 VIA SELECTION-SCREEN AND RETURN.

Dynamic selection screen change in Selection Screen.

Hi Experts,
I am not getting dynamic screen change on selection screen. can you give solution for the following scenario.
I have 3 radio buttons on selection screen. Example: R1, R2, R3.
I have 5 fields on selection screen. Example : F1, F2, F3, F4, F5.
When i select radio button 1 i will get F1 field screen only.
When i select radio button 2 or 3 i will get F2 and F3 fields screen only.
When i select radio button 3 i will get F4 and F5 fields screen only.
Any one give me solution for the above scenario very much thankful.
Thanks in advance,
Sai

Hi
try this code,
REPORT ZTEST_3RB.
TABLES : KNA1,EKKO,VBRK.
PARAMETERS : SALES RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
PUR RADIOBUTTON GROUP VIJJ ,
BILL RADIOBUTTON GROUP VIJJ ,
TOTAL AS CHECKBOX.
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033,
S_PONO FOR EKKO-EBELN MODIF ID VKP,
S_BNO FOR VBRK-VBELN MODIF ID PKP.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SALES = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF PUR = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF BILL = 'X'.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
i think this will help your problem,
Regards,
Vijay

Tabbed selection screen with AT SELECTION-SCREEN ON events does not work

I have a selection screen with 3 tabs fields on each tab have AT SELECTION-SCREEN ON field events.
If you are on tab 1 and select a variant that populates fields on all tabs and then click the execute button ABAP does not seem to recognize that the field has changed when it executes AT SELECTION-SCREEN ON field event unless you physically go to each tab.
I can work around this by:
1) moving all of the AT SELECTION-SCREEN ON field events in a AT SELECTION-SCREEN OUTPUT event. This is not efficient and it potentially opens me up to other problems.
2) changing the selection screen to remove the tabs and have all of the fields on 1 screen. This makes for a very long screen.
Is there any way to have ABAP check all tabs?
Thanks,
Jerry

I finally got it to start. Let it sit and tried and it wouldn't but then I tried again and it did. How do I blow the dust out? I think it must be something with the heat since that comes up alot.
I will do it, I love my Mac.

Selection screen changes at selection screen output

Hi all,
I have to make my one block in selection scren invisible based on a particular condition.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_status FOR g_status NO INTERVALS.
PARAMETERS    : p_trans(3) TYPE c,
                 p_hub(3) TYPE c.
SELECT-OPTIONS: s_auart FOR g_auart.
PARAMETERS:      p_buyt(1) TYPE c.
SELECT-OPTIONS:
                 s_order FOR g_vbeln,
                 s_zzhrt FOR g_zzhrtosec,
                 s_vbeln1 FOR g_vbeln1,
                 s_dccode FOR g_dccode NO INTERVALS,
                 s_pgi   FOR g_pgi.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS    : p_c1 AS CHECKBOX USER-COMMAND cmd.
SELECT-OPTIONS: s_list FOR g_list NO INTERVALS MODIF ID sc1.
SELECTION-SCREEN END OF BLOCK blk2 .
SELECTION-SCREEN BEGIN OF BLOCK blk3 WITH FRAME TITLE text-003.
PARAMETERS    : p_c2 AS CHECKBOX USER-COMMAND cmd2.
SELECT-OPTIONS: s_mail FOR g_mail NO INTERVALS MODIF ID sc2.
PARAMETERS:   p_accld LIKE g_saknr DEFAULT '1342009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_accit LIKE g_saknr DEFAULT '1365009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_opacc LIKE g_saknr DEFAULT '346100XX99' MODIF ID sc2
                                                      OBLIGATORY,
              p_lmacc LIKE g_saknr DEFAULT '1393009999' MODIF ID sc2
                                                      OBLIGATORY,
              p_lmopa LIKE g_saknr DEFAULT '3471009999' MODIF ID sc2
                                                      OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk3.
The block 3 'blk3' should be made invisible based on a condition.
I have tried loop at screen-name but its not working.
Kindly advice.
Thanks and Regards,
Divya

Hi Divya,
Check the below code.
tables: pa0000, pa0001.
parameters: p_chk1 as checkbox user-command rusr,
p_chk2 as checkbox user-command rusr,
p_chk3 as checkbox user-command rusr,
p_chk4 as checkbox user-command rusr,
p_chk5 as checkbox user-command rusr.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_chk1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_chk2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_chk3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_chk4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_chk5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for check boxes and select options
*P_CHK1 Personal Number
*P_CHK2 Employment Status
*P_CHK3 Personnel Area
*P_CHK4 Employee Group
*P_CHK5 Employee Sub group
*S_PERNR Personal Number
*S_PERSG Employee Group
*S_PERSK Employee Sub group
*S_STAT2 Employment Status
*S_WERKS Personnel Area

Field in the selection screen as a select option with two default values

Hi All,
can anybody tell me how to put field in the selection screen with two defaul values.
for ex: selection screen the Account Group KNA1-KTOKD as a select option. The defeault value should be Y001 and Y005.
please reply ASAP. Its urgent.
Thanks in advance,
Madhu

Hi Madhu,
Since Select options are nothing but ranges, you can use the following code to add two distinct values to the select options by default.
s_ktokd-sign = 'I'.
s_ktokd-option = 'EQ'.
s_ktokd-low = 'Y001'.
append s_ktokd.
s_ktokd-low = 'Y005'.
append s_ktokd.
clear s_ktokd.
However, if you want to mention a range like all the values between these given two values to be considered then u may use,
select-options : s_ktokd for KNA1-KTOKD default 'Y001' to 'Y005'.
or
s_ktokd-sign = 'I'.
s_ktokd-option = 'BT'.
s_ktokd-low = 'Y001'.
s_ktokd-high = 'Y005'.
append s_ktokd.
Reward if helpful.

Disabling Selection screen control on selection od Radio button

Similar Messages

Maybe you are looking for