Disabling VTP advertisements on a per port basis

I there a way of disabling VTP from sending advertisements out certain trunk ports on a per port basis. IOS is 12.2 running on cisco WS-C6506-E.

I do not think it's possible without breaking a VTP domain. But you still able to do pruning on the port, excluding all VLANs, except of VLAN 1 of course.

Similar Messages

Hide (not disable) an SSID on a per AP basis

Hello !
I have been researching but did not find a straigh way to do this : I have 3 SSID => A, B, C.
Is it possible to hide (not disable) an existing SSID (let's say B) just on specific APs ?
As per my understanding the option "Broadcast SSID" is only available under the global WLANs > General menu, not on an AP basis.
My solution is with WLC 5508 / 7.4 / AIR-CAP1602I
Thanks in advance for any ideas.
Best regards.
Oliv.

Hi Scott,
Thanks for the additional information!
Yes, I will proceed like this. I will create the new SSID D (>16) with a Different NAME – with Broadcast Disabled - and associate it to the same WLC Interface/Interface Group. Then configure the AP Group.
I assume there will be no issue associating this new WLAN to an existing Interface on the WLC, especially regarding the existing VLAN and routing aspects.
Ok for the second point. As the SSID will have a new name maybe that they will not have any issue regarding any previous SSID recorded in their SSID list.
@ Leo,
Thanks for the warning. The WLAN is in fact a guest WLAN, which is totally open (no L2 & L3 security method). The authentication is totally handled by a third-party box with a web auth portal. The clients will be laptops, iphone, ipads.
The customer on site is disturbed by the fact that anyone can connect to this open SSID and get an IP @ (even not authenticated by the webportal box).
Thanks for your help.
Rergards.
Oliv.

How do I enable javascript on per-URL basis?

Important: NoScript add-on is not the answer!
I am trying to secure my Firefox so that by default all scripting is disabled, but can be enabled on per-URL basis. It seems that Firefox itself doesn't have an option for that, and I have to use add-ons. Unfortunately, all add-ons I tried, including NoScript, require javascript to be globally enabled in Firefox (Tools -> Options -> Content -> Enable Javascript). Then they apply their settings, including whitelist. I am not satisfied with this kind of solution, because if something prevents an add-on from running or forces it to stop, the global setting of "enable javascript" kicks in and suddenly all pages can use scripting.
1) Is it technically possible to get a per-URL control with "Enable Javascript" set to disabled?
2) Is there any kind of UI where I could set it so? There are very few websites where I allow javascript, so even something like manually creating an extension is fine with me.

You can't disable JavaScript globally.<br />
If you do that then it isn't possible to enable it in specific cases.<br />
The only way is to enable JS globally and either disable it by default (NoScript) or enable it by default (YesScript) and change the setting for a specific web page.
Adblock Plus also can block JavaScript.

OS X Mavericks and Air Port base station

i just got a air port base station, an old one, and ive just updated my macbook pro to os x mavericks.
when i try to connect to the air port, it says that i cannot configure the air port with the version of air port utillity. apon downloading an older version of the utility, i cannot install it because i get a masseage saying 'the version of mac os x on this volume is not supported'. i would just like to know how i can install the older version of air port utillity tobe able to get my air port to work.
thanks for any help.

I already have the wired router for the phone, and want to go wireless.
You can use the AirPort Extreme base station (AEBS) or AirPort Express. Configure it so that the option to distribute IP addresses is DISABLED. Connect it to one of the LAN ports on your existing router.
You can also use any other wireless access point.

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

How do I disable only the USB 2.0 ports - K7T266 Pro2-RU

None of the USB ports on this MB will work with my Biostar 6-in-1 card reader - however, I have a VIA USB 2.0 PCI card that works fine with it. I want to disable the 2.0 ports only, and install the PCI card. The manual is not very helpful - if I only enable USB 2, which seems to be the USB 1.1 header, that DOES disable the USB 2.0 ports, but it also disables the 2 USB 1.1 ports on the MB!

Yes, and they are labled USB1, USB2 and USB3 - now I assume that these correspond to the JUSB1, JUSB2 and JUSB3 headers on the MB, with JUSB2 being the 1.1 ports on the D-LED bracket, and JUSB1 and JUSB3 being the 2.0 headers. I can only ENABLE certain USB ports in the BIOS - i.e. if I only enable JUSB2, this effectively disables the 2.0 ports - aha - it also disables the 2 1.1 ports on the back of the MB itself!!
Any other answers?

Is there a way we can open/close posting periods on a "per day" basis?

Hi SAP gurus,
Is there a way we can open/close posting periods on a per day basis?
It is not possible in OB52 since it only has control per period and not per day.
Will assign points for suggestions. =) Thanks!

Hii
In standard SAP there is not such functionality where u can do these kind of configuration...it is at least for a month that is through OB52.
If u still wants this functionality it is through the validation.
u need to create the validation for that company code and thn u can use this functionality....
hope it helps u
reward points if helpful
sejal singh

CUPS 8.6 - Supporting Multiple SIP Domains on a per-user basis

Working on a CUPS 8.6 PoC with a customer who currently is running a deployed OCS environment.
Users all sign into a single domain internally but have multiple SMTP domains for email as this customer has many different companies they have aquired.
OCS is able to support and route multiple SIP domains by specifing the SIP address under AD User settings such that two users both signed into the same OCS server can send IM's to each other even though they have different SIP addresses. sip:[email protected] , sip:[email protected]
CUPS on the other hand does not seem to allow this on a per-user basis. It places every user in the sip domain that the server is a member of.
The Jabber client allows you to specify a domain but I am not how this is used as the actual user account in CUPS is only ever the one domain and if you try and specify a different domain in the Jabber Connection Settings, it will not allow you to login.
It is not a big deal for internal communications if everyone is on the same domain, but where it is important is for future B2B IM. Users need to be able to give out THEIR IM address with THEIR respective domain.
Does anyone else know for a fact that I will only be able to have one domain per CUP cluster?
Any thoughts on this design?

Not sure on the design perspective but as for CUPS Domain, we can only have single domain per cluster. As you have already found out that for any user licensed for CUPS, their IM address would be userid@CUPSDomain
CUPS does have funtionality of federating with foreign domains such as AOL/GoogleTalk/WebEx Connect.

Is there a way to prevent DHCP from egress per port via ACL?

Is there a way to prevent DHCP from egress per port via ACL?
i am running serveral SRW248G4's in a MDU enviroment. I need a way to not have dhcp from one customer to the other, however get mine through uplink port.
Any ideas?

i don't think that this would be possible. when you setup acl to prevent services (dhcp in your case), you would need to specify an ip or range of ip address. if computers is yet to receive an ip then it wont even communicate with the dhcp server.

Restrict access to buttons, regions, etc. on a per user basis?

My application restricts access to buttons, regions, etc. on a per user basis.
Here is my application logic...
1. A User can only edit items they own.
2. A Super-User can edit all items
So, when a user logs in, I use a post-authentication process to set the user ID to an application level item.
Now, for example, to have an edit button display on a page, I need to check the item's owner ID against the application level user ID...and check to see if this user is on the Super User list via a query.(which could be set to another application level item upon login...I guess)
Question...What is the best way to do this? Conditional display? Authorization scheme?
Would something like the following work for a Conditional Display?
Condition: SQL Expression
&USER_ID.=&P6_ITEM_OWNER_ID. OR USER_ID in (select USER_ID from table where USER_ID=&USER_ID.)
How would I do this with an Authorization Scheme? (I like the idea of updating the logic in single location...but I'm not sure if it is possible because I have to check PX_OWNER_ID would be different on each page.)

Hi Denes,
Thanks for your code which allows user to edit (if authorized) and view (if not).
But some how - I do not get the image to show up - instead it show a small underline.
From SQL point of view - here is what I get - when i run the sql
'<img src="/i/ed-item.gif">',2,CR TEST,,,,dune2.cit.cornell.edu,CRDMTEST.CIT.CORNELL.EDU,PSPROD,,,CRDMTEST
Here is my wrap_image function
create or replace function wrap_image(p_user_name in varchar2,p_dm_name_id in number)
return varchar2 IS
v boolean := False;
ret_val varchar2(1000);
begin
dbms_output.put_line('user='||p_user_name);
dbms_output.put_line('dm_name='||p_dm_name_id);
-- Check authorization if the user is super user - return true, else if he has edit priv on dm_name_id - return true - else false
v:=ACL_DMTOOLS_DM_PRIV(p_user_name,p_dm_name_id);
if v then
ret_val := '<img src="/i/ed-item.gif">';
ret_val := ''''||ret_val||'''';
dbms_output.put_line('TRUE');
else
ret_val := '';
dbms_output.put_line('FALSE');
end if;
return ret_val;
end;
Thanks for your great educational site.
Regards
atul

Get date by group by per month basis...

Hello all,
I am trying to write a query where i want the count per month...so for example...the below query
select to_char(date, 'MM/DD/YYYY')
from test
where rownum < 10;
TO_CHAR(date
02/10/2009
02/10/2009
02/10/2009
02/10/2009
02/10/2009
05/31/2009
02/10/2009
so i want a count on the date, but want it per month basis....
select count(*), to_char(date, 'MM/DD/YYYY')
from test
where rownum < 10
group by to_char(date, 'MM/DD/YYYY');
so basically end results should be like below
count(*) date
10 Month1
12 Month2
13 Month3

Hi,
You're GROUPing BY something that changes from day to day.
You need to GROUP BY something that only changes from month to month, like this:
SELECT    COUNT (*)
,        TO_CHAR (dt, 'MM/YYYY')     -- DATE is not a good column name
FROM        test
WHERE       ROWNUM     < 10
GROUP BY TO_CHAR (dt, 'MM/YYYY')
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Explain, using specific examples where the query above is not doing what you want, how you get the correct results from the data you posted.

SG100D-08 EU - 2 LED indicators per port - 1 for the traffic - The 2nd one?

Hello,
I'm using for one part of our small business network a SG100D-08 EU switch.
For an unknown reason, this switch is not working at one location. When connected to a laptop, the laptop is not getting an IP address.
If I replace that Cisco switch with a D-Link one, it is working perfectly!
I have tried several things but without success.
The last thing where I cannot find an answer on the messy Cisco website is the signification of the LEDs on the back of the switch.
There are 2 LEDs per port. One is meant to show the traffic but the other one?
Can anyone give me an answer on the last point and maybe tell me why the switch is not working at some places?
Regards,
Bob

According to the manual http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbus/100_Series/SG100D08_QSG.pdf
there is only one light per port. Does the manual I linked to match your product?
Is your laptop older and your old switch 10/100? This is an unmanaged 10/100/1000 switch and you may have an auto negotiation problem on the laptop. You could try hard coding speed and duplex on the laptop.

5508-DHCP per WLAN basis

dear all,
kindly guide me how to configure WLC 5508 internal DHCP per WLAN basis , i read the following document it is clearly mentioned that we can configure DHCP on WLC 5508 per WLAN basis. but i did not find the configuration per WLAN basis
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70wlan.html#wp1293808
need your kindly response
my email address
[email protected]

When you configure dynamic interfaces on your 5508, you can specify DHCP server IP address. Later on you will map a dynamic interface to WLAN.
Also under WLAN advanced setting, you can specify DHCP server IP, if you want to override dynamic interface configured DHCP server to a particular WLAN.
HTH
Rasika
**** Pls rate all useful responses ***

Keep mail local on per folder basis

I have multiple email accounts in Mail. One of them is an Exchange account and one of the folders that is shared with me is one called "Public Folders". This folder has sub-folders that I need and sub-folders that I do not need. The sub-folders that I do not need are taking up too much disk space.
In preferences it gives me the option (per account) to download All message and their attachments or not to download message, etc.
Question: Is there a way that I can have that option to download messages or not be on a per folder basis instead of on a per account basis?

No, and you cannot unsubscribe to any mailboxes either. It’s either all or nothing, but setting Keep copies of messages for offline viewing to Only messages I’ve read should be close to what you want, except the junk filter won’t work in that case...

Can I rout audio on a PER APPLICATION basis?

Is there a way (third party software included) to rout audio on a *per application* basis? I'd like internet audio (Safari, etc.) to go to just the normal line out, while iTunes audio would be sent to digital audio out.

I've heard that audio hijack pro can do this.
http://www.rogueamoeba.com/audiohijackpro/
I don't use it myself but check this post for example
http://discussions.apple.com/thread.jspa?messageID=9299023&#9299023
Message was edited by: V.K.

Disabling VTP advertisements on a per port basis

Similar Messages

Maybe you are looking for