Disappointed Verizon does not include headphones with flagship phone when other carriers do

I just switched to Verizon from Sprint and received my pre-ordered Note 4 today via FedEx. I was really disappointed when I did not see the mp3 headset, as I could have sworn I saw it in "whats in the box" online. I then realized when I was looking at "whats in the box" for the Note 4, I was looking at Sprint's website rather than Verizon. I then googled it and realized that Verizon did this with the Note 3 as well as other flagship phones.
I know the headphones are not super expensive but it just leaves an initial bad taste when buying such an expensive product and committing to service for two years.

With all disrespect your post is completely incorrect. The 4 major carriers negotiate with Samsung into how their retail packages will be boxed and what will be included. This was not human error. Headphones are missing from all Verizon Note 4 retail boxes because Verizon saved money by having Samsung exclude them. ATT did the same. Sprint and TMobile retail packages include headphones because that is what they arranged with Samsung. The Note 4 is not by any means the first example of this. This has been Verizon's practice on previous Note phones and other models as well. I don't get why on a $700 phone Verizon/ATT has to cheap out on this. If you search the net you will see a lot of rants on this - though it may be a small group - Verizon definitely loses customers because of this type of stuff

Similar Messages

Photoshop CS6 Beta does NOT fill Layer with 50% Gray when in CMYK-Mode

1. Open a CMYK-Document
2. Create a new empty Layer
3. Use the "Fill..." command with the option "50% Grey"
4. Result should be: 50% Cyan, 50% Magenta, 50% Yellow, 50% Black, but is 49% Cyan, 40% Magenta, 39% Yellow, 27% Black
-> while this function is normally used to create a layer with the blending mode "Overlay" to have a basis for an "invisible" layer where you can lighten/darken the image or add noise to it, the function "fill with 50% Grey" is malfunctioning now, because this affects an image modification instead of being invisible.

There's a definite difference between Photoshop CS5 and CS6:
Noting that the B value is now 50% in the HSB readout, could it be that this may be an intentional redefinition of ''50% Gray''?
-Noel

MSI Star key 3x fatser, license does not include device !!!

Dears,
I have my MSI star key bluetooth device from 1.5 years, it was working perfect on my windows XP SP2. Then I had some problems with my windows, and I wanted to re-install again the driver (after de-installing the current driver) but I found myself getting the following message, when I try to start the bluetooth device:
"your bluetooth software license does not include use with this bluetooth device. [6]", and when I point out to my CD for the license file, I get this message "Bluetooth software license file not found. [2]".
I have tried the driver coming with the device CD WIDCOMM version 4.0.1.2101 and was working for more than 1 year, and also I have tried the new driver on http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=131&prod_no=101 WIDCOMM version 4.0.1.2900 several times with lots of combination and nothing is working, the bluetooth is still red and refuse to start.
I found the same issue is posted too much over the web regarding the WIDCOMM software in general and solution with something as patch I could not find.
I checked the fixed posting on this forum, but it seems all included URLs in the posting are not working.
It seems that contacting MSI support is a waste of time. Could anyone provide guidance or help for me.
Thanks in advance

Quote
It seems that contacting MSI support is a waste of time.
Have you even tried? Visit http://ocss.msi.com.tw, enter your email address and open a new ticket.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

Verizon does not care about customers!!!

On Sunday, December 9th, I visited my local Verizon store in
Inverness, Florida.
I was excited about getting a new phone and had already
decided on the new Galaxy S III. The store was pretty busy, so we I to wait,
after waiting for about twenty minutes a very friendly sales representative by
the name of Jay was ready to assisted me. I explained to him that earlier this
year I had purchased and returned a phone but that my account had not been
reset to show that I was eligible for upgrade. He then called into Verizon and
spoke to someone named Brandy (<Phone Number deleted>) who stated that she
could not do anything about this situation due to my lack of having a package
tracking number from the phone I had “so-called returned” because it was not
shown as being in the warehouse inventory. After numerous attempts by the sales
representative, as well as myself, to further explain to her that I had
documentation printed from Verizon showing my account being credited monies
back after the phone had been received back into inventory. In an attempt
extinguish the animosity between myself and this Verizon representative, Jay
asked her if there was anyone else, possibly her superior, which we may speak
to. She then put us on hold while she contacted said superior, which reiterated
exactly what she had previously said. My store sale representative had kindly
put his phone on speaker so that I might also be privy to the information given
by these two female representatives. Along with my frustration of the
situation, I had to also sit by as the two of them exchange casual niceties, as
if the store sales representative or myself were not even present. By this
point, I was extremely offended by the utter disregard for myself, being a
loyal customer and for the embarrassed store representative. The superior
explained that even though I had documentation showing the previously purchased
phone had been returned, Verizon did not have any documentation from their
warehouse as ever being received or restocked. She stated that she would have
to file a form to investigate if the phone was indeed received. I was concerned
because this issue was from the beginning of the year and it was now December,
what if they could not find anything? I asked her that very question and she
responded with the answers I dreaded the most: You will have to wait and see
“if” we can find the phone, you are still under a contract because of your
upgrade, and you will be eligible for upgrade again October 2013.
I can not even begin to emphasize my disappointment in
Verizon. I was completely shocked by how not only I was treated but how these
female representatives had also disregarded a fellow Verizon employee too. At
several points he actually had to ask if he could speak without being talked
over by one of them. I would not refer any of my friends, family, or even total
stranger to your company.
The phone call ended with Brandy stating she would get back
in touch with me with an update (which never happened). It is now December 20th
and I am yet to hear from any Verizon representative. Earlier this evening, I
called and spoke with Jennifer (Badge ID#<Deleted>) who was extremely helpful. I
explained the prior situation and provided her with the exact information that
I had provided previously to the store sales representative which then verbally
relayed the information over the phone to the two female representatives. In
matter of minutes, she was able to find a tracking# (<Tracking Number deleted>)
that was received by the warehouse on March 2nd. She could also see
that there was not a name documented for the Verizon employee that sold me the
phone, which came up during my prior conversation because I had to keep
defending myself that I had purchased the phone not in a store, not online, but
over the phone when someone from Verizon contacted me. Jennifer placed me on
hold while she contacted someone else to help her. It wasn’t long and she came
back to the line reporting that she had been able to reset my eligibility. She
apologized for it taking her so long, but I explained to her that when I had
went into the store, I had to wait almost two hours without getting any
acceptable results. I am glad to know that your store representative (Jay) and
your customer service representative (Jennifer), still care about providing
good customer service. If it was not for them, I would honestly believe that
Verizon did not have one ethical employee who believes in doing the right
thing! Even though I finally got it reset, I have never received any response from customer service regarding their employees nasty attitude and lack of professionalism! After the way I was accused of not returning a phone that they had records of receiving, I think they should give me my upgrade for free!
<Personal information of employees and tracking number removed for privacy per the Verizon Wireless Terms of Service .>
Message was edited by: Verizon Moderator

<Inappropriate comments deleted per the Verizon Wireless Terms of Service.>
Message was edited by: Verizon Moderator

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Material document 4900000006 does not include an accounting document

Hi guys
I created normal sales order, delivery and and released it thr VF01.
Then I created the RE document without order reference and PGR. But while checking the accounting documents in VL02N it gives the error as follows
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
Please give me the solution
Thanks in advance
Rahul

Hi Rahul,
Can you tell me how did you resolve this error indetail or step by step? I have a same error in test client. I am doing returns with stock catergory of E while PGI and then it throws error message.
Material document 4900000006 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 4900000006.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
Procedure
Choose Continue and then choose another function.
Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B
regards
rc gopi

Time Machine does not cope well with nearly-full disk

Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
Hardware: iMac (mid 2007)
OS: Mac OS X version 10.6.8 (Snow Leopard)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
Here are some of the interesting entries from the system.log file:
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
Sep 7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
Sep 7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
Sep 7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
Sep 7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
Sep 7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
Note the "error: 0". Error code zero normally indicates success.
There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
Sep 7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?

If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups).

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

When installing acrobat XI pro the 'select a product' drop down menu does not include my product?

when installing acrobat XI pro the 'select a product' drop down menu does not include my product?

For future reference... if you have the trial version installed and plan to buy it after trying it out, there is no need to uninstall it. It can be activted to full use with the serial number from your purchase.
You should still be able to download and install the trial version and use your serial number to activate it. For the direct download link to the trial below, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html

Saved pdf file does not include filled in text

i am using adobe acrobat pro; trail version. I can fill in a fillable pdf file but after saving the file and then emailing the filethe received email attachment does not include my text included in the pdf form?

It most likely does include it in the form, but the PDF viewer that's being used does not display it. If the user were to use Adobe Reader/Acrobat, the form data should appear as expected. The default PDF viewer that mobile devices and some browsers use don't have sufficient support for forms.
If the recipient does not need to interact with the form fields, you can flatten the form before sending it out. This converts the form field appearances to regular page content, so it will very likely appear fine in most any PDF viewer. Post again if you need help flattening form fields using Acrobat.

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."

Hello -
The below error is being received when submitting an app via Application Loader (3.0).
Application Loader ERROR ITMS-90072: "The IPA is invalid. It does not include a Payload directory."
Has anyone encountered this issue? If so, please advise on how to resolve.
Many thanks in advance.

This is an error with Apple's submission verification and you will need to open a developer support request with them. See Re: "Invalid Bundle." "...viewer.app does not support the minimum OS version specified in the Info.plist" for more details.
Neil

Spotlight search does not include map, iTunes, google...

I upgraded to yosemite from mavericks after seeing the latest feature videos from WWDC
But greatly disappointed to see so many features showcased does not work the same way as it was showcased
For example
The spotlight is not working as expected, it does not include maps, web search, photos etc., i even changed the default search engine to bing still does not work
Any idea, if i am missing something
Also is it possible to include github, stack overflow, wikipedia in the spot light search
~Basavaraj

Try re-indexing Spotlight.
Spotlight – Re-index

Disappointed Verizon does not include headphones with flagship phone when other carriers do

Similar Messages

Maybe you are looking for