Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Similar Messages

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Workshop IDE Build does not include all files

We have property files also which we want included as part of the build process
but if we use the IDE build it does not include them. We have to therefore export
the IDE build and customize it to include *.properties like this
<zip basedir="${dest.path}" zipfile="${ejb.outputJar}" encoding="UTF8"> 
<zipfileset dir="${project.local.directory}" includes="*.properties" />
</zip>
which causes a problem for us because the exported build file is specific to a
user's local PC and cannot be used in a team environment.
How can we have the IDE build include all the files within a project i.e. include
properties files also.
Thanks
Mindy

Hi Mindy,
Why not in EJB?
Yes there is no argument as to why property files cannot be copied over from EJB
project.
The reason is that Workshop has not implemented the feature with EJBProject. We
have that feature only for Java projects and not for EJB project.
Thanks a lot,
Vimala
"Mindy" <[email protected]> wrote:
>
You are saying the same thing again. My question is why not for EJB projects?
I know we can create the files in Java project and read them with specific
java
files to read them but WHY NOT IN EJB IS THE QUESTION?
"Carl" <[email protected]> wrote:
Feature of the EJB Project:)
"Mindy" <[email protected]> wrote in message
news:4034c351$[email protected]..
We have these property files in the EJB project, not Java project.Why
should they
not be copied if they are part of the EJB project?
"Carl" <[email protected]> wrote:
The properties file do get copied over if they are part of Java project.
Hence, we have created utility classes in Java project that read
the
property file.
For other project types, like EJB the property files didn't get copied...
"Mindy" <[email protected]> wrote in message
news:4033b944$[email protected]..
We have property files also which we want included as part of the
build
process
but if we use the IDE build it does not include them. We have to
therefore
export
the IDE build and customize it to include *.properties like this
<zip basedir="${dest.path}" zipfile="${ejb.outputJar}" encoding="UTF8">
<zipfileset dir="${project.local.directory}"includes="*.properties" />
</zip>
which causes a problem for us because the exported build file is
specific
to a
user's local PC and cannot be used in a team environment.
How can we have the IDE build include all the files within a projecti.e.
include
properties files also.
Thanks
Mindy

Index Preview Panel does not include all my index entries

I've put all my chapters in a book and created an Index. All is well until I try to edit the Index. InDesigns materials tell me to go to my Index Preview Panel to make edits, which works fine. But the Panel does not contain all my index entries. I've tried updating the previews and regenerating the Index numerous times, but I still cannot get an up-to-date preview panel. Any ideas???

Organize Bookmarks was renamed to '''Show All Bookmarks''' in Firefox 4+ versions.

VerboseToZip failed, and does not include all required file.

Hi,
I've been trying to use verboseToZip to produce smaller weblogic.jar file. This is because the application is going to be distributable via JWS.
I followed the step as provided in weblogic webpage. But I got some error message.
1. "Unable to find class file named 'com.sun.corba.se.impl.orbutil.GetPropertyAction'."
I then found out that this class is located in
C:\Program Files\Java\jre1.5.0_06\lib\rt.jar
So I included this JAR file in my classpath, and run verboseToZip again. Seems passing that error message now, but I got another one:
2. "Unable to find class file named 'sun.reflect.GeneratedSerializationConstructorAccessor25'."
This occurs with every "sun.reflect.GeneratedSerializationConstructorAccessorXX"
So I edited the classList file, and remove all occurence of "GeneratedSerializationConstructorAccessor"
By the way, the line in the classList file is:
[Loaded sun.reflect.GeneratedSerializationConstructorAccessor25 from __JVM_DefineClass__]
I then ran verboseToZip again, and got another error:
3. "Unable to find class file named 'sun.reflect.GeneratedMethodAccessor9'."
Same as before, I removed all occurrence of that line.
[Loaded sun.reflect.GeneratedMethodAccessor9 from __JVM_DefineClass__]
Ran verboseToZip again.. yet another error
4. "Unable to find class file named 'java.awt.$Proxy0'."
Did the same thing, ran verboseToZip again...and another error!!!! (this is an awful process for just producing the slim down version of weblogic.jar)
5. "Unable to find class file named 'sun.reflect.GeneratedConstructorAccessor4'."
Again, same thing.. removed it, and run verboseToZip again. Finally... it ran without error. BUT.....
the generated file does not contain all the class I need..
for example, it does not have "weblogic.jndi.WLInitialContextFactory". Hence, all of this awful process is really a waste.
Has anyone ever experienced this before? I mean, it should be a straightforward process without the need to remove all those lines, right?
Thanks a lot for the helps!
Regards,
Alex Wibowo

Looks like the rest of your post went for a walk.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

ConfigurationSet for specific Module(s) does not include ALL applicable updates

The optional update of March 2015 for WE8S contains some UWF and ELM related updates (KB3037597, KB3036200). I tried to create a ConfigurationSet that only contains updates for UWF and ELM - this was done by creating a answer file that contains the "Unified
Write Filter" and "Embedded Lockdown Manager" module only (removed "Embedded Core") and then used "Add applicable updates" from the "Validate" menu. KB3037597 has been added for UWF, but KB3036200 has not been added.
Next I tried to add "Windows 8 Application Launcher" and "Gesture Filter" (one by one), but that didn't added the KB3036200. "USB Filter" seems not to be a module in my database, so I could not verify that. If I add the "Embedded
Core" module and choose "Add applicable updates" again, KB3036200 becomes part of the configuration, but this also includes many other updates.
Is there a safe to to create a configuration set that contains ALL updates that are related to a specific module?
Thanks and best regards.
Willi K.

Make a copy of your answer file that builds the image.
With the copy of the answer file run add applicable updates
Compare the two answer files and find the differences which should be the various KB update modules. The answer file diff tool will not work with WES8, you will have to do this by hand.
Create a new answer file with only these modules - generate config set
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

Insert statement does not insert all records from a partitioned table

Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.

INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

Import matching RAW does not include all photos

Hello to you all,
When I want to import matching RAW files, Aperture only recognizes a couple of photos inside the projects. I'm using the 'include current filter' as I have made a selection of pictures inside the project based on a rating. But even when I disregard this filter Aperture only sees about half of the RAW files belonging to the JPG files.
The 'date & time' settings are ok and I have not renamed files during import. All JPG files are imported in the same project and I'm importing from the correct SD-card. There are about 300 photo's in the project and I have selected about 80 of them for the matching RAW import function.
Am I missing something here or does this appear to be an Aperture bug?

LR shows only those images that are in the catalog.
If you want to see exported images in LR you have to tell LR to add them to the catalog.
You do this by checking the box "Add to this catalog" in the Export dialog.
WW

Build Specification does not include all files for my VI.

Hi!
As a part of a semester project i have build a VI to control a filtration unit. The VI is working fine on my computer, but I graduate next month and I have to deliver the files on to a person on the university. The problem is that even though i use the "Build Specification" function (i use LabView 2011 Professional Development System), files are still missing when the program is started on the new computer. A warning in the project file indicates that files are missing or removed to a different location. A file named pid.lib is not found, and it seems like the path to each file is the same as on my computer, but the build specification doesn't change that to fit the new computer.
I am a LabView newbe, and I have searced this forum and help files to try to solve this by my self, but now my time is becoming limited. Can anyone help me with this?
Henrik jepsen
Masterstudent Chemical Enginnering
Denmark
Solved!
Go to Solution.

Hi Henrik
You can see what versions of LabVIEW and which Toolkits is installed in Measurement and Automation Explorer (MAX). If you Open MAX, and Select "My System" --> "Software in the left menu, then you can see all software installed.
If you click on the LabVIEW installation. In this case LabVIEW 2011, you can see all toolkits installed.
When you run a LabVIEW project / application on another PC, LabVIEW will use a defined priority of where to load the files from. This is specified in Tools --> Options --> Path --> VI Search Path.
So LabVIEW will frist try to find the VI/VI library in the folder of your project and if the VI is not located there it will look for it as a build function in the vilib, userlib or instrlib folders of LabVIEW. These folders contains VI's and VI libraries installed with LabVIEW.
In this case, as mentioned above you properly don't have the same toolkits installed on both machines. Therefore the PID.lib is not found in the vilib folder as it should be, and thereby you get the error. You can confirm this by reviewing the installed modules as mentioned above.
Best Regards
Anders Rohde
Applications Engineer
National Instruments Denmark

When generating HTML Help, RoboHelp does not include all of the topics. Why and how do I fix it?

w

Looks like the rest of your post went for a walk.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Personnel Admin AdHoc Query not retrieving all records

Hi, I recently added a custom info type to a copy of the SAP ad hoc query for Personnel Admin by using the menu path in SQ02>Edit>Change Infotype selection . The query is picking up the new info type and runs fine but does not retrieve all records from the table for a given personnel id. It only retrieves 1 record per id.
Has anyone dealt with this before and have an easy/quick fix for this?

Have other users try the query, preferably a user with end user authorization.
I've had this issue before, I'm an IT person and I customized a Standard infoset.
During testing, I'm only getting 1 (in my case) Insurance record per employee.
The end user can see multiple record per employee.
Btw, did you customize a Global or a Standard Infoset?
Regards,
Olekan

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Adobe form created in LiveCycle does not remember user input

Adobe form created in LiveCycle does not remember user input when the file has been re-opened after it has been saved.
Example:
"Check box" that has been selected and who have registered Action script (may be that it should be disabled), seems to be reset when the file is re-opened, although it apparently is checked.
Are there settings or script that can prevent this?

Hi there,
usually if the values are not kept in form after saving and re-opening the form, it would be because of your code... or because it is not Reader Extended PDF...
If your code has a function which is to return a value to your field without it to be working based on your Design, it will reset any data..(variables)
Which means...
e.g.: You have an array/var/JSONobject which you populate varying on the data entered in the design, as long as you are in the actual form, without closing and re-opening the form, it will keep all values inside that array / variables / JSONobject. But, once the form closed and re-opened, if you have a function that returns a value to your field, whatever the field, from any variable in the script it will return nothing because every variables are reset. To avoid such a thing, you must repopulate all variables that were assigned previously before closing the PDF Form. To do so, I recommend to have a page(hidden) which contains every important values according to that function and you must repopulate those variables according to the values in the keepVar page...
If you do not have any function that returns a value to a field based on your variables, this is not the solution you are looking for and I am not aware of the reason why it behaves like this... Maybe more information on the behaviour of your form would help locate the issue...
Hope this help

Create batch input, does not include all records

Similar Messages

Maybe you are looking for