Disassembly guide request for GE700
hi,
does anyone know where i could get a guide/video on how to disassemble my GE700?
or what guide could be applicable for my laptop?
i need it to open up the keyboard area. i wanna clean it, as i suspect dust is gathering there.
thanks!
wow. this seems pretty complicated. main reason for my request was to check and clean under the keys for anything that have gotten under there. thanks for the guide Bas
Similar Messages
-
GT 70 2PE 1042US Dominator Pro Disassembly Guide - Request
If anyone has a link to the GT 70 2PE 1042US Dominator Pro Disassembly Guide I'd appreciate a link.
Thank you.you can use those https://forum-en.msi.com/index.php?topic=172804.0
-
CQ71-401SA disassembly guide or guidance?
Hi,
My father owns a Compaq Presario CQ71-401SA which he recently dropped, cracking the screen. As I have a few years experience fixing laptops, he asked me to fix it for him. One massive inconvenience though is that he lives in France and wants me to order the new screen without seeing his laptop (as its in France and I am in England) so I can fit it when he visits England in about 3 weeks time.
I've searched the net and thus far have come a cropper on two counts that I hope someone here may he able to help me with.
1) Is there a disassembly guide available for this model? The newer compaqs are slightly counter intuitive when it comes to taking them apart.
2) Are all CQ71-401SAs the same? I am trying to buy a replacement screen online and was told to confirm the screen serial number as there are two possible models.
Thanks in advance. -
Request for Disassembly guide for GE620DX (MS-16G5)
Hi Guys,
Do you have any disassembly guide for GE620DX (MS-16G5). Already looked on the FAQ page but it seems it's not there yet. Thanks in advance.wow. this seems pretty complicated. main reason for my request was to check and clean under the keys for anything that have gotten under there. thanks for the guide Bas
-
Request disassembly guide for MSI X460DX-291
Found a clip on Youtube, but the quality is a bit grainy. Anyone have .pdf manual/schematic?
Much appreciated!
:hat tip:CHEERS
- Victoryou can use this disassembly guide:
https://forum-en.msi.com/index.php?topic=180786.0 -
Request MSI A6200/CR620 disassembly guide
I mainly need it for a keyboard replacement on an MSI A6200 i5-430m, but I'm pretty sure the CR620 works for it as well.Regardless it'll be good to have since I own this device. Thanks.
you can use this disassembly guide:
https://forum-en.msi.com/index.php?topic=180786.0 -
Looking for Assembly / Disassembly guide for Megabook M670 (MS-1632) Notebook
Good morning,
I've been searching for an Assembly / Disassembly guide for the Megabook M670 (MS-1632) Notebook. If you have this available, could you please post it on this forum?
Thanks in advance.S270 guide to open the machine for e.g. adding memory.
>>Link<< -
Looking for Disassembly guide VR602
Hi there all,
Looking for a Disassembly guide for the VR602.
Thx.Here you go:
https://forum-en.msi.com/moderator/assembly-guides/assemble-163n.pdf
https://forum-en.msi.com/moderator/assembly-guides/ms-163n-disassemble-sop.pdf -
Disassembly guide for AE1900-09SUS
Hi there, I need to replace the CMOS battery, of my computer, because every time I disconnect the computer is looses the time setting.
How to I proceed ? Is there a disassembly guide ?
Thanks,
PasqualeThere are no disassembly guides available to us for All-In-One PCs. Best ask MSI for advice on this:
http://support.msi.com -
Request for MSI X360(MS-1355) dissassembly guide
Request for MSI X360(MS-1355) dissassembly guide
I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard? -
Request for MSI U180(MS-N082) dissassembly guide
Request for MSI U180(MS-N082) dissassembly guide
I need clearer instruction on how to remove the keyboard.
There are 3 clips/locks on the top portion of the keyboard. somehow Prying it with a flat head screw driver does nothing.
Or do you need to unscrew the screws at the botton of the chassis first before trying to remove the keyboard?
How exactly do you pry the said 3 clips/locks at the top of the keyboard? -
Disassembly Guide for MSI FR700 (MS-1751)
Hi,
I'm new to this forum and I was hoping someone could help me getting a FR700 (MS-1751) disassembly guide. I'm also trying to find out what type of bluetooth module this laptop uses as mine doesn't have one.
Thanks!
SebastianQuote from: Bas on 09-January-11, 16:56:38
Here you go: https://forum-en.msi.com/moderator/assembly-guides/fr700-disassembly-guide.pdf
Thank you SOO Much!! This answers my question =D -
How to create request for extracting company code
Hi All,
Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
Start of the after-import method for object type R3TR ISTS (Delete Mode)
Start of the after-import method for object type R3TR ISMP (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
The errors affect the following components:
BW-WHM (Warehouse Management)
Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
Pls help,,,
Regards,
viren.Hi Viren,
Glad that your problem is resolved.
Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
Bye
Dinesh -
request for code
needs a code (which ,copies the file on your computer (it copies the file to which it will path in TextBox1)
and is pasted file in the folder: C: \ Program Files \ RunerBat \ Backup
and needs code ,which when clicked, "button2" opens "savefiledialog" and writes text with richtextbox1 as .bat ,,,
but stores only when you click button1, it comes to me more about the button "select path the record"This forum is not for ordering code.
Try it yourself. Read the documentation. It is grouped by topic.
.NET Framework Development Guide
To your question related these sub topics:
File and Stream I/O
SaveFileDialog Component (Windows Forms)
Button Control (Windows Forms)
Creating Event Handlers in Windows Forms
If you have a specific problem, post the code you wrote and which question you have.
Armin -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012?
Maybe you are looking for
-
Crystal Reports 2008 Barcode font not exported to any format
Hi, I am creating a report that will use IDAutomationC128XXL barcode font (GS1 standard). I have downloaded and installed this font in my machine. I use the Visual Basic UFLs (IDAutomationFontEncoderUCC128()) to convert my content to barcode. I also
-
PSE *.0-How To Get Rid of That Annoying Welcome Screen!!??
I thought I saw a post on how to get rid of that annoying "welcome" screen and all the ads when PSE opens but cannot find it. Can someone point me in the right direction please? I just want PSE to open into the Organizer upong clicking. Dan
-
Google keeps disappearing from the search bar, and I think Norton keeps finding it?
Norton keeps finding the google option in search bar it is classified as High Risk. Once Norton finds Google, it is no longer available in the search bar...Please help. Google and Firefox are my only options :)
-
I have a sports clip in my movie that I want to be shown regular at first, then backwards. How do you make a clip play in reverse. I would appreciate any help. Thanks.
-
Please advice do i need which module / SAP certification should i register? I have 10 year experience in Financial planing.