Disco 4i viewer and username problem in URL

Hey there.
I'm trying to call a Disco Viewer workbook from a simple URL. The problem is that I want any user to click on the URL and then it should go to Viewer and ask for their username.
I know about the doc concerning URLs in the Disco Viewer manuals, but the problem is, if I code the user's responsibility (rs=), the eul (eul=), etc. and also the username (us=), then fine, it works and just asks for the user's password.
But if I take out the username (us=), then Viewer makes you put in the username, responsibility, password, etc. - in otherwords, won't let me just enter the username and already have the responsibility, etc. coded.
I've tried enter stuff like: us=?, or us='', or us=, or us="", etc. or not us= at all, but I can't get it just to ask the username.
Anyone done this and know what I'm missing - or is this a feature of Disco Viewer?
Thx. in advance.
===============================================
example url works below:
http://c28aaa.oracle.com:8000/discoverer4i/viewer?nlsl=en-us&wbk=AR__AR_TERMS&wsk=17&rs=ICU~20Receivables~20Manager&pg=1&qv=2&eul=EUL4_US&db=icup1aa&us=RPROUDMAN
example url doesn't have username and all requested at run time:
http://c28aaa.oracle.com:8000/discoverer4i/viewer?nlsl=en-us&wbk=AR__AR_TERMS&wsk=17&rs=ICU~20Receivables~20Manager&pg=1&qv=2&eul=EUL4_US&db=icup1aa

I have re-installed windows 7 to find the reasons, and because the power supply to load the hardware too much,Uninstall the two dvd-rom, no problem,We have similar situations, then we can consider the power supply causes

Similar Messages

Quick view and preview problems

After upgrading to Mountain Lion, I've experienced consistent problems with quick view and the preview image on column view. I always browse the Finder in column view, so for instance, if I were to browse through a folder of photos, instead of seeing a thumbnail image in the far right column, there is blank white space. If I resize the window, the thumbnail appears. Also, if I were to hit the space bar for quick view, only a white image will appear. Closing it and reopening it will correct the problem. This happens every time. The problem started when upgrading to OS X 10.8 from 10.6.8, and it persists after the 10.8.1 update. Computer is an early 2009 iMac, 2.93 GHz, GT 120 video card. Anyone seen something similar? I haven't been able to find anyone else with the problem.

I have the exact same problem and it's frustrating. I thought it was only when I double-clicked an attachment jpeg from Entourage, but it happens with all images from any source.
I've removed the plist on several occasions too, and it works fine for a while. I can't pin down when it decides to stop working again, but it does after a few image views.
It's only happened since the Snow Leopard installation. I'm up to date with all Apple updates.

DPS schema view and bind problem

Currently we have a DSEE backend with the suffix "dc=example,dc=com" and a DPS LDAP view with the suffix "dc=sample,dc=com" for the DSEE backend.
We have an application, Oracle Access Manager (OAM), that is configured to bind to the DPS view and it needs to search "cn=schema". I have defined a view that presents "cn=schema" from DSEE but the problem is that when the following search is performed, it fails.
$ ldapsearch -b cn=schema -h DPS -D uid=user,ou=people,dc=sample,dc=com cn=schema
ldap_search: No such object
ldap_search: additional info: Unable to process the search request. Reason: [Original error=32] Silent BIND failed: err=32, error message "", matched DN ""
If I don't specify a bind user, then the ldapsearch works as expected.
In the DSEE error logs, it shows where it's trying to bind with the DN from the DPS view, i.e. uid=user,ou=people,dc=sample,dc=com. It should be remapped to uid=user,ou=people,dc=example,dc=com.
I understand what the problem is, I am just having a difficult time in figuring out where/how I can define the base-dn and dn-mapping-source-base-dn properties for this.
I have schema-check-enabled on the connection handler but that doesn't work either.
Anyone else solve this problem already?
I can't have OAM just bind to the DSEE instance.
Thanks!
Edited by: user10751400 on Aug 21, 2012 10:14 AM
Edited by: user10751400 on Aug 21, 2012 10:20 AM
Edited by: user10751400 on Aug 21, 2012 10:25 AM

Hi,
One easy way to address the problem is to configure the schema data view to always use the anonymous account instead of forwarding the original user credentials. To do so, you must first create a new data source that points to the backend server holding the schema,
then execute the following command on that data source object:
dpconf set-ldap-data-source-prop -h host -p port data-source-name \
client-cred-mode:use-specific-identity bind-dn: bind-pwd-file:
DPS restart might be required to take the new config into account
HTH
-Sylvain
Edited by: Sylvain Duloutre on Aug 22, 2012 12:36 PM

Crystal Report Viewer and border problems

Post Author: catalinandrei00
CA Forum: Deployment
Hello there, I've created an report and I've added borders for the fields in the report (Right click on the field > Format Object -> Border -> Choose for the 4 margins the line-style single). The report is correctly exported to different formats (.doc, .pdf, .xls). My problem is that when I display the report in an ASP.NET 2.0 page using an Crystal Report Viewer the report is correctly shown but the borders don't appear.My question is why the borders don't appear in the Crystal Report Viewer? Thanks for helping for solving this issue. It's very important.Catalin

Hello catalinandrei00
I have the exact opposite problem as yours.
I am using integrated crystal reports with Visual Studio 2005 and I have put a Crystal Viewer on a web page.
First I also had the same problem like yours and then in one of the post i found a solution for this. Hope it will work for you too. here it is :-
Just remove the following line from your aspx page.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
Now regarding my problem. My problems is that now i can view the borders and everything correctly in the viewer but when i try to print the report it automatically exports to Adobe first and BAM!!! the format disappears. Though if i export to word Doc format it export perfectly fine with all the borders and everything
I hope some other reader will come to my rescue...pls HELP.

Viewing and import problems

I have a Sony DCR-HC 32 Handycam. When I connect the camera to my computer iMovie 5.0.1 recognizes that the camera is connected. I can control the camera from my computer (play, pause, fastforward). However, I cannot view the video on my computer screen (I just get a very pretty blue screen) and cannot import the video into iMovie. I saw a "fix" in another post that suggested that I turn off the computer for 4 minutes, unplug all USB and firewire. I did that and it worked for the first clip (40 seconds) and then the same blue screen. I went through this again and it didn't work this time. Are there any other suggestions?

Thanks for your suggestions. I did upgrade, I unplugged the computer for several minutes along with all USB and firewire. I was able to download about 20 minutes of video. Even when I changed tapes it continued to work for about 3 seconds. I had to rewind just a bit and it stopped working and now the comupter will operate the camera but I cannot see the video nor can I import. I then tried the "crazy garage band fix", but it didn't work. (I'm back to square 1!) Am I really going to have to go through all of this every time I need to import video?
Help!!

Viewing and sound problems

I am unable to use vision as any programme I try to watch freezes every 30 secs. The sound also goes at the same time. If I try to watch anything on You tube the same thing happens. I am unable to watch a video on email. My own recorded videos are fine. My broadband supply has become very on/off with regard to speed and quality. I have a constant orange status light and a flashing green ethernet light and no AP light on the box nearest the computer and home hub 2.0. In another room I have a constant orange light, flashing green ethernet and a constant green AP light. I have made no changes to warrant all the problems. I have filters on all necessary plugs. I have also spent hours checking, changing and swapping leads. I first contacted BT on the 12th April, the problems appeared to cease for a couple of days and then began again. I was subsequently informed that there is a problem locally.
As a hard working, night shift staff nurse I normally enjoy the programmes on catch up and i.player etc. I feel that this has gone on for long enough now. Can someone please advise me.

Welcome to this customer to customer forum.
To enable forum members to help you, please could you look at Helping forum members to help you which asks you to do a few checks first, and has some helpful hints.
When you have done that, please post the results here, so members can offer advice. Thank you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Video Viewer and Canvas problem

I'm new to Final Cut Studio and I'm using academic version, but when i go through the dvd tutorial editing, I can't see my finished product in the canvas and this makes it impossible to edit. If anyone can help I'd appreciate it so much.

Welcome to the forum!
Make sure your Canvas window is set to RGB, and also that it isn't in Wireframe mode.
-DH

Problem in tabular form based on dynamic view and pagination

Hi All,
I have a manual tabular form based on a dynamic view. The view fetches the records based on search criteria given by the user in all cases. But this view fetches ALL records when user clicks on pagination, without considering the search criteria. This is the problem I am facing.
I am doing the following:
Since tabular form does not support pl/sql function returning query, I cannot use a table directly. I need my results based on search criteria selected by user. Hence I created a dynamic view and used a "INSTEAD OF UPDATE" trigger to update the table.
I use a set bind variables procedure, on load before header for setting the variables.
This view fetches the correct data based on user search always. It creates a problem only in one situation, when using pagination in the report.
The example can be found at:
http://apex.oracle.com/pls/otn/f?p=19399:1:
username = [email protected]
pwd = kishore
Here if "manager name" is entered as test, we get 5 records in "Summary of requests" report and 5 records in "Inactive Requests" report. When user clicks on Pagination in any of the reports, ALL the 7 records get fetched in "Summary of Requests" and 6 records in "Inactive Requests". How can I overcome this problem?? The report must consider the search variables even when pagination occurs.
Is this because, the inbuilt "html_PPR_Report_Page" executes the region query once again by considering all search variables as NULL?
Backend Code is at:
http://apex.oracle.com/pls/otn/
workspace: sekhar.nooney
Username :[email protected]
pwd: kishore
application id = 19399
My region code is something like:
select *
from regadm_request_v
where access_type = :F110_REGADM
and status <> 'INACTIVE'
order by request_id
My view code is:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGREGOWNER.REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_NAME),'%')||'%'
AND upper(manager_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_NAME),'%')||'%'
AND upper(employee_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_SUNET_ID),'%')||'%'
AND upper(manager_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_SUNET_ID),'%')||'%'
AND upper(request_date) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_REQUEST_DATE),'%')||'%'
AND upper(USAGE_AGREEMENT_RECVD) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD,'~!@',NULL,REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD)),'%')||'%'
AND upper(STATUS) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_STATUS,'~!@',NULL,REGADM_REQUEST_PKG.GET_STATUS)),'%')||'%'
AND upper(REQUEST_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_REQUEST_APPROVED,'~!@',NULL,REGADM_REQUEST_PKG.GET_REQUEST_APPROVED)),'%')||'%'
AND upper(nvl(APPROVAL_DATE,sysdate)) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_APPROVED_DATE),'%')||'%'
AND upper(APRVL_REQUEST_SENT) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS,'~!@',NULL,REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS)),'%')||'%'
AND upper(NOTIFY_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION,'~!@',NULL,REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION)),'%')||'%'
I would be glad for any suggestions.
Andy/Varad any ideas? You both helped me a lot on my problems for the same application that I had faced before in More Problems in Tabular form - Please give me suggestions.
Thanks,
Sumana

Hi Andy,
The view and the package for setting bind variables work properly in my entire application other than the pagination. A pity that I came across this only now :(
I have used this same method for holding variables in another application before, where I needed to print to PDF. I used this approach in the other application because my queries were not within the APEX character limit specified for the "SQL Query of Report Query shared component".
In this application, I initially had to fetch values from 2 tables and update the 2 tables. Updateable form works only with one table right? Hence I had created a view. Later the design got changed to include search and instead of changing the application design I just changed the view then. Still later, my clients merged the 2 tables. Once again I had just changed my view.
Now, I wanted to know if any method was available for the pagination issue (using the view itself). Hence I posted this.
But as you suggested, I think it is better to change the page design quickly (as it would be much easier).
If I change the region query to use the table and the APEX bind parameters in the where clause as:
SELECT *
FROM REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
I also changed the ApplyMRU to refer to the table.
Here the pagination issue is resolved. But here the "last Update By" and "Last Update Date" columns do not get updated with "SYSDATE" and "v(APP_USER)" values, when update takes place. Even if I make the columns as readonly text field, I am not sure how I can ensure that SYSDATE and v('APP_uSER') can be passed to the columns. Any way I can ensure this? Please have a look at the issue here: http://apex.oracle.com/pls/otn/f?p=19399:1:
I have currently resolved the "last update" column issue by modifying my view as:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGADM_REQUEST
I modified my region query to use APEX bind parameters itself as:
SELECT *
FROM REGADM_REQUEST_V
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
And I use the "INSTEAD OF UPDATE" trigger that I had initially written for update. The code is:
CREATE OR REPLACE TRIGGER REGADM_REQUEST_UPD_TRG
INSTEAD OF UPDATE
ON REGADM_REQUEST_V
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
UPDATE REGREGOWNER.REGADM_REQUEST
SET MANAGER_EMAIL = :NEW.MANAGER_EMAIL
, EMPLOYEE_EMAIL = :NEW.EMPLOYEE_EMAIL
, STATUS_UPDATE_DATETIME = SYSDATE
, USER_UPDATE_ID = (SELECT v('APP_USER') FROM DUAL)
WHERE REQUEST_ID = :OLD.REQUEST_ID;
END;
Please let me know how I can resolve the "last update" column issue using the table itself. (Just for my learning)
Thanks,
Sumana

Album view and Cover Flow problem

Well, im going to get one of the new ipods soon and they have that Cover Flow feature which is pretty cool. Anyway i have a problem, when i try and sort them by album, i go to Album View and even if the album names are the same, they arnt in the same box, because they have various artists. Ill show some pics now.
http://img530.imageshack.us/img530/9604/probz1nm0.jpg
See how they arnt in the same box because of their artists? Then when i go to Cover Flow tab, to see how it will look on my ipod it comes up like this
http://img530.imageshack.us/img530/6366/probz2wu4.jpg
All the ones without artcovers so far, are all the songs from the album "MOS" like you saw in the previous picture. So does anyone know how to fix that problem? Because i dont want like 20 MOS albums showing up on the Ipod with only 1 song in each of them when i can have them all in one.
Thanks

You need to select the "Compilation" button on each to overide the fact that there is a different artist for each song. think about it, the chances of two different artists having the same name for an album is pretty big. How is any music jukebox supposed ot know that they're the same....
select all the songs, open apple/control "I" and click on compilations on bottom right.

Refresh problem by combination of programmatic view and master-detail page

I am using the latest versions of both ADF (10.1.3.2.0.4066) and JHeadstart (10.1.3.1.26) and I have an application with 1 page in which I have as root page a programmatic view (table-form) which I fill with request parameters.
Under that programmatic view I have a master (table) with 3 detail pages (table).
The programmatic view is populated with always 1 row, which goes always correct.
The problem is occuring when iterating through the first entity based master table which contains lots of rows. Then the problem is that when you navigate through the master table the detail pages are refreshed correctly, but when you navigate back to the first row that row won't get updated.
The next thing I tried is create a new jheadstart application with only the master-detail pages (entity based), so without the programmatic view, and then the iterating through the master table and the refresh of the child tables is working correct.
What can be the problem here.

Have you tested this in the ADF Business Components Browser? That's the tester that you can find by right-clicking your ADF BC Application Module and choosing Test. If you go to the View Object instance for the programmatic view, and using the ViewLinks to its children, do you get the same behavior as in the JHeadstart application?
kind regards,
Sandra Muller
JHeadstart Team
Oracle Consulting

In a document library : group by view and manage metadata filter & Navigation problem

Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
navigation :
- all the documents appear under my group by, even the ones that does not correspond
- In the other hand, the number in brackets shows the correct number of documents that should be shown
See screenshot below.
Did you already encounter that issue ? Is there a workaround ?

Hi,
According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
to show the corresponding documents with the correct numbers in SharePoint 2013.
In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
library. As a result, it showed only items matching the filter values.
So, I recommend that you can follow the steps to implement it in your environment.
Step1: Enable Metadata Navigation and Filtering:
Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
If it is not enabled for your site, you can enable it on the Site Features pages for your site.
You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
1. Go to “Site Settings” and click “Manage site features” under Site Actions.
2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
Step2:
Configure Metadata Navigation:
You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
1. Open the document library for which you want to configure metadata navigation.
2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
7. Click “OK”.
Step3: Set a group by two columns by modifying view in the document library:
1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
3. Click “OK”.
Step4:
Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
The result will like as below:
There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
Best Regards,
Linda Li
TechNet Community Support

Problems to download folios in the content viewer and in the app viewer

Hi there!!
I am having a problem and want to know if somebody can help me.
Since a few days, in 9 folios whose particular being very heavy (170-350 MB) can not be updated on the Ipad. On our test Ipads appears a message that the server is not responding.
Before last thursday I made multiple changes and updates to these folios and I doesn‘t have any problem to upload from InDesign and download and update the foliosin the Ipad. Even I built the viewer in the app builder and published one of the folios and the problem is the same.
I create an app (single folio) directly from InDesign using my creative cloud user and the app works good, but the idea it‘s include this folio in a viewer with many other contents.
Any advice!
Thanks!
Mauricio

Hi John,
This problem is new to you or already had before?
Because for me it‘s new, I've been working on these folios over a month, rising corrections uploading from InDesign and testing on ipads many times and had not had this kind of trouble!

How to solve the flash Builder 4.6 scroll view and textinput display problem?

I have a dynamic form application which worked well on flash builder 4.5, having display problems in flash builder 4.6 now. What I did is adding
TextInput objects to a scroll view and set the texts for them dynamically. Everything is fine after the screen loaded. But if I scroll down, sometimes the texts will be placed in wrong positions. I attached the screen copy of the wrong display. Does anybody know how to solve this problem? Thanks.

Check out the two threads below (if you have not already). I have not tried it but aeonus describes an approach that made me think of something that might work ... It is a workaround but, what if you have a text field (txtA) with the skin that does not allow soft keyboard selection, but does scroll correctly, and on the onClick event of that text field, you dynamically cover it with another text field (txtB) that does allow soft keyboard selection, (but does not scroll properly) and trigger the keyboard. After you get the entry from the user, set the value of txtA and destroy txtB ... leaving you (theoretically) with properly scrolling text fields. If you have a lot of those in your app, you might want to write a component that implements that behavior.
"Create a dynamic textfield, and on click, invoke create a StageText instance at the same location as the textfield (by setting the StageText.viewPort property)
Finally, set StageText.softKeyboardType to "numeric" and call StageText.assignFocus();"
http://forums.adobe.com/thread/915019?tstart=0
http://forums.adobe.com/thread/911214?tstart=0

Viewset - active view and data validation problem

Hey there,
I've a problem while using a viewset (1 col, 2 rows) and the data-validation in the wdDoBeforeAction() method.
My application works basically like this:
The first view is displayed with 2 mandatory input fields. Upon the evaluation result of the entered data in these fields, a corresponding second view will be displayed. The input fields in the first view are set to read only and a button named "Change" appears. This button triggers an action which fires and outbound-plug to an empty view, so that the second view disappears and resets the "read only" properties of the input fields in the first view, so that the user can enter new data.
The problem is, that the second view contains input fields itself, which are validated in the wdDoBeforeAction() method of this view. The navigation is cancelled if an error occurs. Well, this is fine if i want to submit (pressing the button "Approve" in the second view) this data and proceed, but if i want to go back to the first view (by hitting the "Change" button), i want to discard all information entered in the second view and i dont want this data to be validated. It's quite annoying if u just want to correct the first views data but have to enter correct values for the second view in order to get through the second views checks..
I hope that's clear enough, otherwise i will upload a screenshot to clarify.
Thx in advance
Regards
Pascal

Hi Pascal,
although I wont prefer to do so for reasons of readability, you could use wdDoProcessbeforeAction to control your view-flow.
Take a look at the example, I have two Buttons with two actions, one is set on "Validate", the other is not (guess which on is the validating ).
You can get the action triggered inside the doBefore ... method and determine whether or not the checkbox is set.
So put your code to validate the input in the i(isValidting) branch and your problems are solved.
Keep in Mind: I would delegate the Validation from the view to the controller, handle the validation myself with custom coding and then check in the view controller if any errors occured.
hope that helped,
Jan
//@@end
public void wdDoBeforeAction(com.sap.tc.webdynpro.progmodel.api.IWDBeforeAction validation)
    //@@begin wdDoBeforeAction
       IWDAction currentAction = validation.getCurrentAction();
       if (currentAction == null) return;
       String action = currentAction.getText();
       boolean isValidating = currentAction.isValidating();
       if (isValidating) {
            wdComponentAPI.getMessageManager().reportException(action);
       } else {
            wdComponentAPI.getMessageManager().reportSuccess(action);
    //@@end
Edited by: Jan Galinski (Holisticon) on Sep 8, 2009 3:15 PM

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Disco 4i viewer and username problem in URL

Similar Messages

Maybe you are looking for