Discounts for Multiple AP Invoices

Hello SAP Gurus,
Here is my current situation: When I want to apply discounted payment for multiple vendor invoices, I have to manually calculate the discounted payment amount for each of the invoices. I want the system calculates the value and have the difference applies to the discount account and cut checks for the discounted amount. Here is an example. I have my first invoice for $500 for 3% discount ( pay term 0002), another invoice for $300. When I use tcode F-53, I have to enter discounted amount at the outgoing payment screen. I have hundreds of invoices I want to pay at once without manually calculating the discounted amount. How can I automate the process? Thanks
James

Rozario-
You need to setup cash discount in your system. Did you enter discounts in the payment terms? That would be the first thing to do. Next, you have to assign your GL Account in transaction code "OBXU" to automatically post to cash discount account.
Then, you should see cash discount amount automatically in the f-53 screen. Also make sure you have activated cash discount in the F-53 (there will be a icon to activate cash discount). Also make sure your invoices have the payment term.
Hope this helps.
Shail

Similar Messages

  • Single Excise invoice J1IIN or J1IJ for multiple  Comercial Invoice or Deli

    Hi Friends,
    Can we do Single Excise invoice J1IIN or J1IJ for multiple  Comercial Invoice or Delivery.
    Points will be awarded
    Regards,
    ashu

    J1iiN is for Excise invoice posting for Factory sales.
    whereas, J1iN is for excise invoice posting for Delivery from Depot.
    In my opinion, multiple posting of Billing doc is not possible.
    Whereas, you can view billing due list for excise posting by using tcode J1iDUEList
    Thanks,
    JP.

  • Is there a discount for multiple accounts?

    Hi
    My wife and I have seperate Icloud accounts. Is there a discount for multiple accounts upgrading to the additional storage?

    I'm afraid not; and additional storage is per separate account and cannot be shared.

  • Single Commercial Invoice for multiple Excise Invoices

    Hi ,
    The business requirement is like this:
    Contract1- Sale Order1- Delivery1- Excise Invoice 1(17th Feb) - Price As per Contract
    Contract1- Sale Order1- Delivery2- Excise Invoice 2(17th Feb) -
    Contract1- Sale Order1- Delivery1- Excise Invoice 3(17th Feb)
    Contract1- Sale Order1- Delivery3- Excise Invoice 418th Feb)
    Contract1- Sale Order1- Delivery4- Excise Invoice5(18th Feb)
    Contract1- Sale Order1- Delivery5- Excise Invoice 6(18th Feb)
    Contract1- Sale Order1- Delivery6- Excise Invoice 7(19th Feb)
    Contract1- Sale Order1- Delivery7- Excise Invoice 8(19th Feb)
    For all the 8 Excise Invoices, single Commercial invoice with Price based on the Exchange rate.
    Is it possible to do in SAP , if so, what are the settings need to be done.
    Thanks& Regards
    Sri

    Dear Lakshmipathi,
    In standard, we can create excise referencing billing document and I dont know how you could generate multiple excise invoices. Are you generating proforma against each delivery ??
    Delivery1- Proforma Invoice1- Excise Invoice1 (17th Feb) - Customer A- Shiping to X
    Delivery2- Proforma Invoice2- Excise Invoice 2(17th Feb)- Customer A- Shipping to Y
    on 17th Feb one ARE-1 for both the Excise Invoices of Customer A
    Delivery3- Proforma Invoice3- Excise Invoice3 (18th Feb) - Customer A- Shiping to X
    Delivery2- Proforma Invoice4 Excise Invoice 418th Feb)- Customer A- Shipping to Y
    on 18th Feb one ARE-1 for both the Excise Invoices of Customer A
    Finally, for all the 4 Excise Invoices on 28th Feb, Client wants to Send a Commercial Invoice for the total dispatch qty(@1000US$/Ton) and the Exchange rate(Ex:48.46)  is taken based on the Bank Negotiations.
    I would like to understand, Is its possible to create a commercial invoice  with Accounting entries for the above mentioned scenario for Excise Invoice 1 and Excise Invoice 3.(As in Proforma Invoice no accounting entries created). Based on this the client will recieve the payment from the Customer A.
    Thanks & Regards
    Sri
    Edited by: Sri on Feb 18, 2009 3:18 PM
    Edited by: Sri on Feb 18, 2009 3:23 PM

  • Brazil Boleto Barcodes - Single Barcode for multiple vendor invoices

    Hi All,
    I have the following two questions in Brazil Boleto process.
    1) The vendor is giving a single boleto bar code for multiple invoices. However when we are entering the barcode in the Bank reference field, the last digits are getting changed as the system is picking the amount of that particular invoice in the barcode instead of the consolidated amount of all the invoices?  How to handle this scenario in SAP?  Is it possible to handle the single Boleto bar code for multiple invoices case in SAP?
    2) In F110 Automatic Payment run, we want to pick only the Vednor invoices for which boleto barcodes are updated. Is there any standard way of only picking the invoices updated with barcode only in the F110 payment run?
    Advance thanks for your help.
    Regards
    Kotesh Padarti

    Hi Hussein Merchant ,
    For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
    Go to FCH5 and assign manual single check here
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Single Payment through multiple banks/accounts for multiple vendor invoices

    Hi,
    In R12, is there a way to pay through different Bank Accounts for different supplier invoices in a single go?
    I assume, we can do so by creating a PPR, and then assigning payer bank account for each invoice before creating payment instruction.
    However, we are looking for a single template setup which can have multiple bank accounts tied to different Pay Groups, and based on invoice pay groups the system automatically selects he bank accounts while creating the payment file.
    E.g. We have Inv01 in OU1 with Currency USD, Paygroup USD_PAY, Inv02 in OU1 with Currency EUR paygroup EUR_PAY, Inv03 in OU2 currency USD paygroup USD_PAY & Inv04 in OU2 currency EUR paygroup EUR_PAY. We have seperate Bank Accounts for each currency say EUR_BANK, USD_BANK
    Can we create a single template such that for paygroup USD_PAY, bank account USD_BANK can be set up and for paygroup EUR_PAY, EUR_BANK can be setup, so that when we create payment file, we can have them created simultaneously for USD_BANK (Inv01 & Inv03) & for EUR_BANK (Inv02 & Inv04)
    Appreciate if someone can share their experience/thoughts
    Ashutosh

    Hi,
    have a look at this thread:
    Vendor with Multiple Bank Account in MIRO
    Best regards.

  • Process single chq for Multiple Vendor Invoice and other Non-Vendor GL

    Hello Experts,
    Scenrio :
    In most of the cases, Vendors of our client have the same Banks as that of our client. our client provides facilty to thier Vendors by depositing chqs in thier account upon due date.
    Procedure :
    I want to process a manual transaction (with a single chq for intra-bank transfer). the total amt on chq would be the total of selection of several invoices & some other payable GLs.
    Query :
    which T-Code should i use & how do i proceed.

    Hi Hussein Merchant ,
    For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
    Go to FCH5 and assign manual single check here
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Report in VIM Analytics for multiple PO Invoices

    Good afternoon
    I would like to share with you a concern that I have
    Im triying (unsuccesfully) to extract a report from VIM Analytics for those documents that were posted with more than one Purchase Order
    Does anyone experienced a similar case ?
    Sebastian

    Hi ,
    Thanks for your valuable time.
    We are in designing phase of the project. we need to know ,Is there any inbuilt dashboards or reports built using both PO and PR repositories?
    I would like to explain with ex:
    Let's say we need a report or dashboard containing few fields from PO and few fields from PR.Let's assume both PO and PR data available at same granularity.
    Do we have any such inbuilt reports or dashboard?
    If not,could we customize the report generation using both PO and PS tables?
    Please provide the solution.
    Thanks in advance.
    Edited by: user3561029 on Aug 31, 2008 9:03 PM

  • Single ERS Invoice for multiple POs with different GS and same IP

    Dear All,
    I have a Requirement as per the below scenario:
    We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
    Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
    Ex:
    GS IP PO GR ERS
    vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
    vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
    When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
    I have tried using 2 user exits for MRRL, but none of them work for this functionality.
    Thanks,

    Hi,
    Go for  MIRO without MRRL.
    Instead ERS, you can post single  Invoice(MIRO) for multiple POs  for one vendor.
    OR
    Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
    Regards,
    Biju K

  • Excise Invoice Print problem for multiple Invoices

    HI   All,
    I Have developed a Zprint prog and zsmartform and attached it to standard tcode J1IP .
    when we execute J1IP outputtype J1I10  we get multiple invoices . if we select one check box and execute and press print preview/ print we get the print correctly . But if we check multiple check boxes and press print/preview then we have to press print button multiple times/come  back for every invoice .
    My requirement  is when we execute J1iP for multiple invoices it should not come multiple times pop up window ..ie in one print request we need to send multiple invoices . How to achieve this functionality.

    Hi,
    use NO_OPEN and NO_CLOSE fields of CONTROL_PARAMETERS structure
    in Your call to smart form function module.
    Currently You print every invoice in separate spool request.
    You should print all invoices in one big spool requests.
    Set NO_CLOSE = X to all, except last one, and NO_OPEN = X to all, except first one.
    Regards,
    Przemysław

  • Single Credit Note for Multiple Invoices

    Hi,
    For multiple invoice of a specific customer only one credit note to be issued.
    Pls guide.
    Regards
    Vijay.

    Create credit memo request with reference to first invoice (the pop-up screen will take only one).
    Once all the items are copied to the credit memo request use menu path Sales document -> create with Reference , enter the second reference invoice. This will copy all the line items in the second invoice.
    Repeat the second step to copy all the invoices of the customer to the credit memo request.
    Do invoicing to generate a single credit memo. The credit memo request may split at the time of invoicing (some times) but you can prevent it.

  • Single invoice for multiple DO & Output for the same!

    Dear Gurus,
    I have configured an output type for Export & its for Collective billing,where we have a contact,a sales order and multiple Outbound deliveries but have one collective billing for multiple DOs.
    Here the issue is :-
    1-when i go for collective invoice ,it does not generate a single invoice with all DOs
    2-thus due to which output too is not getting generated.
    I want the settings needed for collective invoice & output type for this export invoice.
    Regards
    Swati Bhatt

    Hi,
    !- Combination criteria in billing is different (gives two diff nos.)
    In copy control at item level DATA VBRK/VBAP assign routine 001(SAMPLE INVOICE SPLIT)
    2-Number of foreign trade data is diff again.
    Check foreign trade data, It should be same in all delivery document
    kapil

  • Single invoice for multiple orders with different divisions

    Dear All,
    while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I  tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
    Thanks In advance
    Regards
    CNRNAIR

    Hello
    single invoice for multiple orders with "different divisions" invoice is getting split
    FYI - Different Division means different Sales Area.
    So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
    Thus, combining docs with different sales area is practically impossible.
    Provided, you are using common division.
    Hope this assist you,
    Thanks & REgards
    JP

  • Single invoice for multiple payment terms

    Hi Friends,
    I have given 2 different payment terms for 2 line items in single order and the billing is splitted due to this reason. I want to know where the system is checking this control. Because I want to create single Invoive even the payment terms are different. (The routine 003 under Data VBRK/VBRP in SO to Bill copy controls will be usefull only to create single Invoice for multiple SO's where the payment terms is same). But I need to create single Invoice even for multiple payment terms.
    Can anyone suggest me at the earliest please.
    Kumar

    Hi Kumar,
    The Billing Split is take care at Copy control level.
    For multiple line items in one single SO, with different Payment terms is not acceptable as per the  business logic and its not best practices.
    Please suggest the business to go on Split method only.
    Or
    Try to use Proforma Invoice Concept.
    Regards
    Srini

  • Single invoice for multiple deliveries in Export scenario

    Hi All
    I am trying to create a single invoice for multiple deliveries. In case of Local Sales i am able to do it.
    But when it comes to export sales the system is not allowing me to create Single invoice for 2 deliveries . This is a export scenario. Can you suggest... When  i am checking the split invoice log it says split due to header data "Number of foreign trade data i"
    Plz suggest.
    Thanks
    Rishi

    Thanks G. Lakshmipathi
    Resolved
    As per the split analysis, System was checking the number generated for Foreign Trade data at delivery level.
    As told  i have Tried maintaining the Indication at copy control level VTFL "Redetermination of Foreign Trade Data at Billing level".
    This has resolved my Issue.
    Thanks Again
    Rishi

Maybe you are looking for