Discoverer Does not uses partitions while running report

Hello All,
I am noticing a strange thing in Discoverer 9i desktop and i.e
I have my table partition based on Trx date and when I am using trx date as a parameter in my report why it is doing full scans for all the partition across the table...?
Because of this even a reports for single day takes hours..
Any help will be higly appreciated.....

Hello Rob,
Below information has really help me a lot.It made to look at probable cause..And it was Really funny one.
The report was using a parameter as Trx Date and range partition at back end was on another date field. :).
I just joined a comp week ago and was wondering why a report for single date take 2-3 hr to execute....And I was not sure of this discoverer version...
Thanks again for help....
Devang Shah

Similar Messages

Web.Show_Document does not work with long running reports

I am using Web.Show_Document() to call reports from Forms. Everything works fine for smaller reports. However for long running reports I do not get the output instead get the page "This page cannot be displayed.". On checking the job status on the report server I find that report is still running and completes after some time but by that time my http request has already timed out. What configuration do I have to change to make my long running reports work.
Thanks

So, looks like this is an IE issue. I need to add the form server site to my list of Trusted Sites. Once I did that, everything started to work fine. Thought I'd share in case anyone is really interested.....

Get-Item: Cannot find path ' ' because it does not exist. While running Powershell script.

I am trying to run a PowerShell script to upload files into a SharePoint site in an Azure environment...the script works fine on my local machine, but every time I run it in Azure (remotely), I get errors. Here is what my simple script looks like...
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue) -eq $null )
Write-Host "Loading Sharepoint Module "
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
Add-PSSnapin -Name Microsoft.SharePoint.PowerShell
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell) -eq $null )
Write-Host "Failed to load sharepoint snap-in. Could not proceed further, Aborting ..."
Exit
#Script settings
$webUrl = "http://sampleWebUrl"
$docLibraryName = "My Documents"
$docLibraryUrlName = "My%20Documents"
$localFolderPath = get-childitem "C:\Upload\Test Upload\My Documents\" -recurse
$contentType = "ContenttType1"
#Open web and library
$web = Get-SPWeb $webUrl
write-host "Web:" $web
$docLibrary = $web.Lists[$docLibraryName]
write-host "docLibrary:" $docLibrary
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
write-host "files:" $files
If ($contentType = "ContenttType1")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibrary.rootFolder.URL)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
write-host "SP File:" $spFile
write-host "SP Item" $spItem
#populate columns
$spItem["Column1"] = $FileNameArray[0]
$spItem["Column2"] = $FileNameArray[1]
$spItem.Update()
$fileStream.Close();
Again, I can run this on my local machine and it works just fine, but when I attempt to run it on the Azure environment I get this error...
Get-Item : Cannot find path 'C:\powershellscripts\12653_B7045.PDF' because it does not exist.
At C:\PowerShellScripts\Upload-FilesIntoSharePointTester.ps1:32 char:42
+ $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\powershellscripts\12653_B7045.PDF:String) [Get-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
What strikes me first is the fact that the file its looking for is in the "C:\Upload\Test Upload\My Documents\" directory, but the error keeps saying "C:\powershellscripts\" which is where my script resides and not the files I want to
upload into SharePoint. When I step through the code, all the variables are holding the correct values. The $localFolderPath shows the name of files that I am attempting to upload, so it recognizes them. But once I step through this particular line of code,
the error occurs...
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Is this an error caused because I am remoting into the Azure environment? Has anyone dealt with this issue before? I would really appreciate the help. Thanks
Update: quick thing I noticed is that these two lines of code are returning null values. Again, is this handled differently in Azure or remotely? I ask cause this is the way I know how to do this, locally.
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()

"...square brackets are wildcard characters in Windows PowerShell..."
When you use cd without a parameter it uses the -Path parameter. In this case you'll have to escape the square brackets so they are not considered wildcards. Each of the commands in the first example does the exact same thing.
cd 'Learn PowerShell `[Do Whatever`]'
cd -Path 'Learn PowerShell `[Do Whatever`]'
cd (or Set-Location) also has a literal path parameter (-LiteralPath) that does not require using an escape character (`) before each of the brackets. Hope this helps.
cd -LiteralPath 'Learn PowerShell [Do Whatever]'

Index does not exist error while running the query

Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

Hi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju

Bursting control :DocumentProcessor does not use translation while bursting

Hi
We are trying to use the bursting feature in BI Publisher using the DocumentProcessor class/APIs.
The java code is :
import oracle.apps.xdo.batch.DocumentProcessor;
public class BurstingTest
public BurstingTest()
     try {
          DocumentProcessor dp = new DocumentProcessor ("bursting_cntl.xml", "test.xml","temp");
          dp.process();
catch (Exception e) {
System.out.println(e);
public static void main(String[] args)
BurstingTest burst1 = new BurstingTest();
The bursting control file is :
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXG_ACCOUNTING_CNDN_REPORT/G_Cust">
<xapi:delivery>
<xapi:filesystem id="file1" output="C:\Projects\XDO\RTF_TO_PDF\output\${cust_name}.pdf"/>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="file1">
<xapi:template type="rtf" locale="fr-FR" location="C:\Projects\XDO\RTF_TO_PDF\test.rtf"
translation="C:\Projects\XDO\RTF_TO_PDF\test_fr_FR.xlf" >
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
The XLF file has the necessary translations. Source en-US and target fr-FR.
However, I see that the translations are NOT being picked by the DocumentProcessor. The bursting does happen successfully, however I don't see the translations in the PDF.*
Am I missing something here? Probably some flag that I need to set or something of the kind?
A section of the XLF file is as shown below :
<?xml version = '1.0' encoding = 'utf-8'?>
<xliff version="1.0">
<file source-language="en-US" target-language="fr-FR" datatype="XDO" original="orphan.xlf" product-version="orphan.xlf" product-name="">
<header>
<prop-group name="ora_reconstruction">
<prop prop-type="extractorVersion">5.6.3_120.1</prop>
</prop-group>
</header>
<body>
<trans-unit id="5dacac6a" maxbytes="4000" maxwidth="56" size-unit="char" translate="yes">
<source>Please confirm the above information.</source>
<target>Merci pour confirmer l'information mentionee</target>
<note>Text located: body</note>
</trans-unit>
<trans-unit id="366403c2" maxbytes="4000" maxwidth="23" size-unit="char" translate="yes">
<source>Dear [&0],</source>
<target>Cher [&0],</target>
<note>Text located: body</note>
</trans-unit>
<trans-unit id="ce145901" maxbytes="4000" maxwidth="23" size-unit="char" translate="yes">
<source>Invoice Date</source>
<target>Date de la facture</target>
<note>Text located: body/table/table header</note>
</trans-unit>
Request you to revert as soon as you could.
Thanks and Regs
Krish
Edited by: user11131627 on Nov 8, 2009 10:16 PM

Ike
Yes, I believe the translation element is defined.
Referred to this post about that :
http://blogs.oracle.com/BIDeveloper/2009/06/bursting_translation.html
Also, we did try using the translation element thru' Apps and submitted as a standard concurrent program.
The translation fie was used correctly.
My question is :
How do I force the usage thru' my custom Java program and in which I use DocumentProcessor?

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

Dataset can not be open error while running report rtcctool

Hello Experts,
While running report rtcctool we are gettin following dumps the says
ABAP runtime errors DATASET_CANT_OPEN
Occurred on 05/27/2011 at 10:00:52
Unable to open file "/usr/sap/B**/DVEBMGS00/sec/SAP_AGS_OLCNT_VERIFY.pse".
I am aware that the eror is happening because of this file but not sure from where to get this file. Please let me know any of you aware about this.
Regards
Yogesh

Hi all.
I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
Greetings.

After i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

HT5225 "This disc does not use the GUID Partition Table Scheme...". I keep getting this message when I try to install OSXLion. It has something to do with a repair Apple performed last year. I use a 17" MacBookPro. Any suggestions?

"This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.

When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.

XML report is not giving heading while running from application.

Hi Everybody,
We are facing one issue in xml.
XML report is not giving heading while running from application.
Pls suggest.
Regards
Sreehari.
Edited by: user1762471 on Sep 27, 2010 10:48 PM

What application you mean?

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

Error message: rep-4232, rep-4204 while running report

hi
if possible pl. reply me at: [email protected]
i want to email my report by using report6i. i have given following parameters as per
oracle note : 106549.1;
destype: mail
desformat: pdf
desname: [email protected]
i am running this application on window nt .
in my system i am able to send emails using netscape browser. i am getting rep-4232, rep-4204 while running report when i run my report.
pl. suggest.
bye
navdeep
null

i got one reply:
This bug is fixed in version 6.0.8.12.0
Please go through this bug document REP-4204 / REP-4232 WHEN EMAIL REPORT TO VALID EMAIL ADDRESS NOT IN ADDRESS BOOK for explanation.
but problem is that i have 6.0.8.8.3
how to resolve problem in this version

Finder does not list partition and very slow

Running Lion 10.7.2 on a Mac Pro 1,1.
Today my Finder refuses to list one of the partitions of one of the HDDs I have. All other partitions are listed normally but this one. I did the regular permissions and Repair Disk...
Problem is: Terminal can see and list files on that partition, and so can Open dialogs (which apparently do not use Finder?).
Any ideas?
Thank you.
I included a video to better portray what I am talking about above.
http://www.dailymotion.com/video/xm48q5_finder-does-not-display-partition-and-ta kes-ages-to-read-it-when-custom-path-put-in_tech

TiGPS wrote:
it still won't let me drag it to the sidebar under "DEVICES" or "FAVORITES".
Odd. But you shouldn't have to drag it -- from a Finder Menubar, select Finder > Preferences > Sidebar and check the appropriate Hard disks or External disks box. It should show up automagically.
If it's already checked, or has a minus sign in it, uncheck it, then check it again.

Create timer function that does not use start-sleep

Hey all I would like to create a timer function that does not use the start-sleep command because this freezes my GUI. I've wrote the start of a function but it seems to move on before the specified time has finished.
Here's what I have:
$Global:timerCounter=0
$Global:timer = new-object System.Windows.Threading.DispatcherTimer
Function Timer{
param(
[parameter(Mandatory=$true)]
[int]$time
$timer.Interval = [TimeSpan]"0:0:$($time)"
$timer.Add_Tick({
$Global:timerCounter++
if($Global:timerCounter -ge 1) {
$Global:timer.Stop()
$timer.Start()
Then in my script i would like to call Timer -time #of seconds. It seems that when I call it the add_tick is registered and then started but it continues on with the rest of my script. Is there a better way of doing this without using start-sleep?
Thanks!

Okay the issue I'm having is that I have code after the $timer.start that I don't wan't to run till a powershell job is done. In all the examples I've seen it has to come to the end of the code then it starts the tick. So in your example it comes to the
end of of your code and showsDialog() then starts ticking.
So:
add-type -AssemblyName system.windows.forms
$form=New-Object System.Windows.Forms.Form
$btn=New-Object System.Windows.Forms.Button
$form.Controls.Add($btn)
$btn.add_Click({$form.Close()})
$btn.Dock='Fill'
$btn.Font='Lucida Console, 20.25pt, style=Bold'
$btn.Text=[DateTime]::Now
$timer=New-Object System.Windows.Forms.Timer
$timer.Interval=1000
$timer.add_Tick({$btn.Text=[DateTime]::Now})
$timer.Start()
$form.ShowDialog()
#I want to do other things here but only after the ps job has finished
Thanks I really am trying to figure this out.
Here is the code I'm working with I guess I'm unclear on how to order the timer and the rest of my code:
if($syncHash.mainCopy){
$syncHash.mainJobDone = $false
$syncHash.writeHost = $false
while(-not $syncHash.mainJobDone){
[System.Windows.Forms.Application]::DoEvents()
if($syncHash.writeHost -eq $false){
Write-OutputBox -Message "Copying"
$syncHash.writeHost = $true
$syncHash.inProgress = $syncHash.mainCopy | Where-Object {$_.State -match 'running'}
$syncHash.currentCopyTime++
}elseif($syncHash.currentCopyTime -ge ($syncHash.averageCopyTime * 2) -and $syncHash.collectionCopyTime.Count -ne 0){
$syncHash.Unusable += $syncHash.currentMainCopyMachine
$syncHash.computersNotForInstall += $syncHash.currentMainCopyMachine
$syncHash.inProgress = $null
$syncHash.mainCopyTimedOut = $True
Write-OutputBox -Type WARNING: -Message "$($syncHash.currentMainCopyMachine) is taking too long. Removing Job.."
Add-Content -Path $log_path -Value "$($syncHash.currentMainCopyMachine) taking to long to copy to"
Stop-Job $syncHash.mainCopy
}else{
$syncHash.inProgress = $syncHash.mainCopy | Where-Object {$_.State -match 'running'}
Write-OutputBox -Message "." -NoNewLine
############################# ############# So I need it to wait right here I have other code other than in this block ############# that needs to run $syncHash.currentCopyTime++
if(-not $syncHash.inProgress){
$syncHash.mainJobDone = $true

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

Discoverer Does not uses partitions while running report

Similar Messages

Maybe you are looking for