Discoverer report with parameters and functions

I am new to Discoverer. Is there a way to create a report (with parameters) of one line per customer such that the following data will be displayed for each customer?
Among the parameters is: from_date (month & year) ,to_date
The basic query gives totals for each date (month & year) for every customer.
Among the fields displayed:
1-customer_id,
2-balance until from_date,
3-total activity between from_date and to_date
I have a function to calculate the total balance until from_date, but then I cannot get the total activity on the same line. I tried using another function and I tried using a total calculation but to no success.
Is this possible?
Thanks.

Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael

Similar Messages

  • How to call discoverer report with parameters over http link?

    Hi!
    I'm using oracle application server 9.0.4 (incl. discoverer).
    I have an oracle portal report where I want to call a discoverer report for each line over a http link. It is always the same discoverer report - with each line I want to pass parameters to my discoverer report.
    How can I pass parameters to the report? Is there another way rather than using GET parameters?
    Thanks
    Markus

    Hi Markus
    You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
    Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
    Best wishes
    Michael

  • Connecting Crystal reports with dashboards and passing parameters

    Hi ,
    Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
    I would appreciate for this.
    Thank You.

    Hi Ganesh,
    You can refer the following links for connecting Crystal reports with dashboards:
    Dashboard integration in Crystal Reports using flash variables | Clariba Blog
    https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
    http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
    Regards,
    Renu

  • Enhancing Customer Reports with Commands and Parameters

    Hi All,
    I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "<b>Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US</b>". Has anyone faced the problem, can anyone please help to remove this runtime error.
    Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
    Regards
    Poonam

    <i>True, the application property service is apparently not to be used for a real-life scenario</i>
    You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
    <i>in our case it forced the server down with deadlocks. </i>
    This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.
    <i>
    Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.
    </i>
    The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
    <i>Could you provide me with a link to the documentation for the logging framework?</i>
    <a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

  • How to call PDF Report with parameters in jdeveloper 10.1.3

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

  • Interactive Report with PL/SQL Function Source

    Is it possible to create interactive report with PL/SQL function source returing a query? If not, has anyone done any work to simulate the interactive reporting feature for a normal report using API?

    I haven't tried that before but you could:
    1. create a collection from your result set returned by a dynamic query,
    2. create a view on that collection,
    3. use the view in your interactive report.
    The usability of this proposal depends from a question how "dynamic" your query is - does it always have the same number of columns or not.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • Is there any ECC report with PurchOrder and Purchase Requisition Selection

    Hi there,
    for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
    I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
    Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
    Any insights are greatly appreciated.
    Thanks

    Hi Curious ,
    Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
    http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
    Or try the following transactions:
    ME5A - Purchase Requisitions: List Display
    ME53  - Display Purchase Requisition
    ME53N - Display Purchase Requisition
    Hope this helps your cause.
    Regards,
    Kush Kashyap

  • I need to make a report with graphs, and generate an exit file to word

    I have to do the acquisition for a laboratory and to make inmediately a report with graphics and a constant test about the method of the experimentation

    Probably your best bet is to use ActiveX and control Word from LabVIEW, this way, you can act as you were using Word directly, automating all the steps to create your report. Look for examples in the developer zone, although there will be more examples relating Excel, that can show you the way to act. If you need to use this intensively, i think NI has created a Word toolokit that you can buy.
    For any particular question, just ask.
    Good luck

  • Invocation report (Discoverer Viewer) with parameters from an application

    Hi everyone,
    I'm proving report in Discoverer Viewer invoking them from an application, which sends parameters to him.
    I cannot obtain, that they directly execute when doing click in the URL of execution with its parameters, but that opens the screen where it requests to enter the parameters, without assigning those that they are arriving to him in the URL.
    I verified if the problem were in the name of the parameters and apparently it takes the values from such by the order in which they arrive.
    Also I verified that the values of parameters are arriving correctly from the application.
    Somebody can help me with this?
    Thank you very much
    Ana

    Hi,
    I could resolve the problem.
    The creation parameters in discoverer reports is case sensitive with the parameters that arrive from an application.
    Anyway, thank you
    Ana

  • SSRS cube report with parameters...and more

    Hi,
    I have created some basic SSRS reports in the past with parameters, but I was just given the following project by my manager and I would like to find out 2 things:
    1.  Can this be accomplished using SSRS
    2.  If yes, what are the High-Level steps needed to get this accomplished
    First off, the SSRS report(s) will be connecting to an SSAS cube, so there will be some MDX involved.  The cube is fairly simple, 1 measure group and 3 dimensions.
    The main piece of this project will be 4 parameters that will be displayed to the user; Quarter, Division, Operations, and ReportList.
    The Quarter is just the Quarter that the user wants to run the report for (Q1-2012, Q1-2013, etc..).  This will come from the Date Dimension  The Division will be a list of all of our internal divisions that we have setup in our Client Dimension
    table (Eastern Division, Western Division, etc...).  The Operations will be list of operations for each division selected in the Division parameter (Boston Ops, NY Ops, etc...).  This list will also come from the Client Dimension.  The ReportList
    will be a list of all reports that are related to the Division and Operations Selected.  For example, Eastern Division and Boston Ops could have 3 reports, Western Division and San Francisco Ops has 5 reports, etc...
    The final piece to this is that when the user selects the reports to be generated, they will have to be created into 1 report.  This way the user can convert the report to 1 single PDF file or print the report.  So if 3 reports were selected, each
    report would be a separate page and could then be converted to a single PDF file or printed.
    I know that SSRS has the ability to create cascading parameters, so that should take care of dynamically generating the Operations parameter drop down as well as the REportList drop down.  Of course, using MDX to accomplish this will tricky since I
    haven't done much with MDX.
    I guess my last concern is how to generated multiple reports given the parameters selected and have them be combined into 1 report?  I was thinking subreports, but not sure if that would work.
    Any feedback or concerns/ideas on how this can be accomplished using SSRS?
    **Using SSRS 2012
    thanks
    Scott

    Do you have a question? The title doesn't provide sufficient information what you are after.

  • Deploying forms and reports with parameters from portal

    hi , how do i build forms and reports from database limiting them with parameters from the login details on the portal on my application server.

    I had the same problem.
    I resolve with a new third party tool:
    RunDev
    I've found it on:
    solutionmarketplace.oracle.com
    searching "rundev".
    James

  • Batch Scheduling of reports with parameters

    I've been searching the doc and have come up empty so far on this -- how do I take a Discoverer workbook/sheet that accepts a customer account parameter and set it up as a scheduled report?
    The trick here is that I want to schedule 100s of these things so that reports are generated for a large number of customer accounts, but not all customer accounts (there are many thousands of customer accounts).

    Hi,
    Yah! this looks good. Other way would be to use the Schedule command line parameter itself. For example you can have a form application taking the user parameter for individual user plus they can enter the schedule parameters also or you can hardcode them . Then you send this request to Report server which run the jobs at schedule time.
    FYI, in report 9i there is a new feature called event triggers also. You can run a report with any event trigger from the database. This may be useful for the solution you have suggested, suppose you wish to run the report as soon as user updates data in database, this even t triggers can be used.
    Hope this helps!
    Thanks,
    Rohit

  • Discoverer report with PO_RELEASES in R12

    Hi all,
    I'm migrating a Discoverer report from 11i to R12. The query of the folder uses the po_releases and this join condition "and rcv_transactions.po_release_id = po_releases.po_release_id(+)". When I run the report I get the error "invalid number" but when I tried the same query but using the po_releases_all it seems to work. Is this ok? I saw that in R12 po_releases is just a synonym, is this correct? I would appreciate your comments.
    Thanks in advance.
    Gabriela

    Thanks Hussein. Yes, I've checked the document you recomend, but the problem seems to be when I try to use po_releases, the synomy) and I don't know why it work with the _all table but not work with the synonym.                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Discoverer report with rollup

    I am looking for a report with following scenario. can some one give some idea.
    Col1 Col2 Desc count sum
    ALL ALL Total of all 500 2000
    ALL D1 Total for D1 50 500
    ALL D2 Total for D2 80 800
    C1 ALL Total for C1 for D 20 100
    C1 D1 Total for C1 for D1 5 20
    C1 D2 Total for C1 for D2 8 35
    Apparently Col1 has more than just C1 and Col2 has more than D1 and D2.
    I am using option to have multiple queries and do a union all to collect the results. Is there a more elegant way?
    This can be done much better in older express technology by setting up cube.
    TIA
    PB

    I can do this with some nifty sql/view combo. but discoverer does not like the resulting sql. I wanted to support this in discoverer so that user can do similar stuff.
    Main thing that i need is to support total for all the rows and also display detail rows. Something like lOV with all,groupcol1,groupcol3,detail5, detail 9 etc. from list of values.
    Thx
    PB Singh

Maybe you are looking for