Discovery V2 System - Initial configuration Step Needed

Hi all,
We have got our Discovery system Version 2. We are now in the process of configuring the system.
We used the below link, for setting up the system.
Getting Started with the SAP Discovery System - setup [original link is broken]
The quick guide says that we need to run the D:SQL_EVALSQL2005SQL4SAP.vbs file .
But in the version 2 we don't have a D drive. Only one drive C is available.
And also there is no such file like SQL2005SQL4SAP.vbs available in the system.
Can anyone help us with the initial installation & configuration document for Version 2.
Thanks & Regards
Senthil

Hi Senthil,
SQL4SAP.vbs is used to install SQL Server 2005 on your system(This installation is not for cluster environment).It will be available in SQL Server 2005 DVD.
SQL Server is shipped with Discovery Server and you willl have to find it.If you don`t find this on the drive you can call for support.Take a look at the blog below.
/people/oleg.figlin/blog/2006/06/20/sap-discovery-system-for-enterprise-soa--part-1
Cheers,
Akella.

Similar Messages

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

Cash management(configuration steps need to generate report)

dear guru's
please help to generate cash management reports
please tel me configuration steps and all to generate cash flow and liquidity forecast
thanking u

Hi
Funds management :
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://ot.bloomu.edu/Documents/SAP/Word%20Docs/New/SAPReportsJan2006.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
nagesh

Initial configuration steps for MS Access in Tomcat4.0

hi,
Please help me to find a way to configure the MS Access initially in Tomcat 4.0 I surfed few sites for this stuff but couldn't find any relevant one.
Thanks.
balarka.

1 - Set up a SYSTEM DSN for ODBC.
Test it from a java program to ensure you can make a connection
Something like:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:MYDSN", userName, password);Once this is done and connected, set it up for Tomcat:
2 - Set up a JNDI datasource:
Instructions for Tomcat4:
http://tomcat.apache.org/tomcat-4.1-doc/jndi-datasource-examples-howto.html
Put this file DBText.xml in your webapps directory
(rename DBText to be the name of your context/webapp)
<Context path="/DBTest" docBase="DBTest"
        debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB"
               auth="Container"
               type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
    <parameter>
      <name>factory</name>        <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
    </parameter>
    
    <parameter>
     <name>username</name>
     <value>javauser</value>
    </parameter>
    <parameter>
     <name>password</name>
     <value>javadude</value>
    </parameter>
    
    <parameter>
       <name>driverClassName</name>
       <value>sun.jdbc.odbc.JdbcOdbcDriver<value>
    </parameter>
    
    <parameter>
      <name>url</name>
      <value>jdbc:odbc:MYDSN</value>
    </parameter>
</ResourceParams>
</Context>

Inter-Company STO configuration steps needed in detail !!

Hi
My Client is using SAP-AFS (IS) ECC 6.00.
Client wants an Inter-company STO to be done with full fledged Deliveries configured.
1. I am facing problem while my Replieshment delivery unable to pick the Quantity for Post Goods Issue. (PGI).
How do i solve this problem ?
2. Also, kindly give me the full procedure for Inter-company STO sothat i can cross check while configuring in my client.
Thanks
Maruthi
Edited by: MARUTHI RAM on Dec 24, 2008 9:08 PM
Edited by: MARUTHI RAM on Dec 24, 2008 9:09 PM

Hi
I have got NO errors.
I am trying to create just a delivery for Inter-comp STO.
But its not getting picked automatically any quantity.
what should i do ?? I cannot do PGI with zero quantity.
Its not giving any errors !!
cheers
MaruthiRam

SM 7.0 EHP1 SR1 - solman_setup initial configuration - No execute authority

I am performing the initial configuration step of SOLMAN_SETUP, when I receive the error below.
Error: E 002 No execute authority
Step: Get ABAP System Info
This occurs when I click the "Start J2EE Configuration" button on the J2ee Configuration screen(Step 3). This opens another browser window, where I enter the solman_admin user that was created in an earlier step. On the first screen, I enter the
Solution Manager Administrator(solman_admin), J2EE Administrator(j2ee_admin) user/password, as well as the password for the Technical Users (SLDDSUSER, etc).
The script then starts and stops on step 5 of 118, with the error shown above. Below is the output from the link provided on the error window. It is not clear to me, what execute authority is missing and for which user. Any suggestions on where to look for further details about this error, or possible solutions would be appreciated. Thanks.
InvokeService:Get ABAP System Info
Library: sap.com/tc~lm~config~bs
SourcePath ./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Time 2011/03/22 at 12:41:32
WSDL service/NW/AbapServer/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal.wsdl
Destination
<Destination name="ABAPHost" subtype="message" type="JCOConnection"> <JCOConnection><host>SUZUKI</host><user>SOLMAN_ADMIN</user><password>% secure content %</password><sysnr>00</sysnr><sapnr>001</sapnr><lang>en</lang></JCOConnection></Destination>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : SUZUKI
sysnr : 00
client : 001
language : en
function name: S_TCC_LMCFG_LIB_GET_SYSINFOInput
<Input/>
InvokeService- Result: Error
Duration:734 ms
SourcePath./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Refresh Env. Messages: false
Output
<S_TCC_LMCFG_LIB_GET_SYSINFOOutput xmlns:system="http://sap.com/ctc/systeminfo"> <CLIENTS/> <SAPRL/> <LOGSYS/> <LOGSYSTEXT/> <SID/> <OPSYS/> <RETURN> <BAPIRET2> <TYPE>E</TYPE> <ID>SCTC_API</ID> <NUMBER>002</NUMBER> <MESSAGE>No execute authority</MESSAGE> <LOG_NO/> <LOG_MSG_NO>000000</LOG_MSG_NO> <MESSAGE_V1/> <MESSAGE_V2/> <MESSAGE_V3/> <MESSAGE_V4/> <PARAMETER/> <ROW>0</ROW> <FIELD/> <SYSTEM>SMXCLNT001</SYSTEM> </BAPIRET2> </RETURN> <CLIENT/> <COMPONENTS/> </S_TCC_LMCFG_LIB_GET_SYSINFOOutput>
Regards,
Russel Robbins

Thanks to all for the suggestions.
I first reviewed note 1451426, but the changes discussed in that note, were already present in my system.
I then performed a trace while repeating the error, but I did not find any trace output (at first). I then added SAP_ALL and SAP_NEW to users SOLMAN_ADMIN and J2EE_ADMIN (just in case), and repeated the initial configuration step. After adding these profiles, the step completed successfully.
One additional note, after reviewing the trace information closer, I did find the failing object that was causing the issue originally (see below). This occurred for user SOLMAN_ADMIN. The other option would have been to add this object/value to one if the roles in use, as Ragu had suggested.
S_CTC      RC=4 ACTVT=16;
Also, I noticed that in the trace, the only users reported were SOLMAN_ADMIN, SAPJSF and SLDAPIUSER, so the profiles were definitely not needed for user J2EE_ADMIN.
Thanks again for the suggestions from everyone.
Regards,
Russel

Fresh Netweaver 73 with BPM and BPR - initial configuration

We installed a Netweaver 73 Java Only with the UT types EP, BPM&BPR, BI Java and NWDI.
We are looking to the initial wizard configuration tool for BPM, but we did find it.
We expect to find something like the wizard for the PI configuration.
Beside this url where we expect to find informations does not works:
http://help.sap.com/saphelp_nw73/helpdata/en/de/434b624d74451ca2e0faa188534118/frameset.htm
Any suggestion about the initial configuration step for a fresh BPM system ?
regards

start your configuration http://host:port/sld/fun
it is straightforward....

SIS configuration steps

Hello SD Guru's
I want to configure sales info system to my client.
Please let me know the step by step configuration steps needed for this.
Heighly Rewarded,
Reg,
krishna.sapsd ya.com

hi
1.create information structure by selecting the key figures and characteristics. After creating the information structure u must activate and generate.
2.include updating rule for information structure. After including the updating rule the information structure u must activate and generate
3.select the updating rule is whether for day, week, month, or year by double clicking on the information structure.
4.Maintaining all seetings ie; customer statistics group, materialstatistics group, sales document, sales item, billing document, and assign all these to sales document type, sales item, billing type,
5.Assign sales area to updating rule.
6.check the sales area whether all settings are maintained or not.
7.maintained customer statistics group in the customer master record, and material statistics group in the material master record.
8.After all the settings use T.c. MCSI enter the sales area customer material and see the results, now u get the report or sales of a particular customer or organization.
Note: Before doing the last step create a sales order, delivery, AND billing.
for details check this link
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37544e449a11d188fe0000e8322f96/frameset.htm
reward points if helpful
regards
chetan

Errors solman_setup initial configuration in StartSLD Configuration step

Getting an authentication error when trying to sign into SAP netWeaver using the solman_admin account created in the first step of the initial configuration. I tried going back and creating another user and setting a new password but am still getting the same User authentication failed. I am able to sign in as the J2EE_ADMIN user id here and continue the configuration but get errors on step 66 of 137 Maintain SLD data supplier user. Error: Name or password is incorrect. I am able to click on in the error box the Step: Maintain SLD data supplier user which takes me into the J2EE Engine Useradministration. In here I do not see the solman_admin userid if I try to create it I get the error Current suer has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for the user creation, check your Persistence Configuration."
I do find my SLD data supplier user SLDDSUSER but am not sure what to fix here for step 66 noted above.
Within Abap I am able to sign in as solman_admin successfully

As I said in my initial problem I cannot create the solman_admin in the UME. I access the UME via "http://cvlnxsp1.corp.cvpsnet.net:51000/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp" (J2EE Engine Useradministration)
What role or group do I need to give the J2ee_admin id to allow me to get around the error when clicking on create user in the UME
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
In ABAP I have given the j2ee_admin sap_all so I am assuming there is a role or group that j2ee_admin has to have in the UME?

Managed System Configuration step Assign Diagnostics Agent

Dear Experts,
We've newly instaled solution manager system 7.0 Ehp1 via latest sp stack 25 on aix 6.1, we've completed initial and basic configuraiton successfully via solman_setup, and instaled wily introscpe on same host with solution manager system,
Now i am trying to managed system configuration for solution manager system via solman_setup step Assign Diagnostics Agent as demo link below
https://service.sap.com/~sapidb/011000358700001735062008E
I opend http://>SOLMANHOST>:<SOLMANPORT>/smd/go/ADMIN_AGENT
>> Agent Candidates Management
>> Connection Parameters
>> Custom SLD Parameters > Aply and the selected the SMD instance then trying to attached via password SMD_ADMIN
But agent registration is waiting, SMD_ADMIN user is creating when i execute intial configuration, after i change the intial password, password is correct, so why the agent state is waitng status, i also push sld Setting for all from SMD view tab,
I've also try to restart SMD agent, /usr/sap/SMD/J98/SMDAgent/log/SMDSystem.0.log file after restart
Oct 28, 2010 11:07:25 AM [Thread[main,5,main]] Info       Starting SMDAgent ...
Oct 28, 2010 11:07:25 AM [Thread[main,5,main]] Info       ===> Establishing connection to server 'ms://ccisolman:8101/P4
Oct 28, 2010 11:07:28 AM [Thread[Connector,5,main]] Info       Smd connector is disabled because no SLD association and no credentials found.
Oct 28, 2010 11:07:32 AM [Thread[SLD-Registration,1,main]] Info       [SLDReg] Next try to push instance data in SLD is Thu Oct 28 23:07:32 EEST 2010
Best Regards

hi
pls chk again your sld parameters and check the correct user name, password entered in agent connection management under CUSTOM SLD(in agent candidates management)
jansi

Managed System SLM~ABAP is not configured (Step 10: Configuration Check)

When I try to spend the last procedure "Configuration Check" (item 10 - Managed System Configuration) I get here is only an error message
The definition of Technical System 'SLM~JAVA' is not correct: 'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
'SLM~JAVA': Operating System 'Linux~2.6.32-358.23.2.' of Host 'sslm' must have at least one Software Component Version
Outside Discovery issue: refer to SAP Note 1611483
Managed systems setup | Managed System Definition Status (post setup) | SYSTEM =SLM~JAVA
What a way such settings: Managed systems setup | Managed System Definition Status?
I probably know only the tab SapSolution Manager: Configuration-> Managed system configuration-> Technical systems, but there make these settings is not possible.
How do I resolve this is "must have at least one Software Component Version"?
ps said note (1611483) has been done, but apparently no effect brought

Hi Michael,
Can you please check below :
Correct Software Component version is displayed in LMDB -> Host - > Tab Installed Software.
Managed System setup -> Assign Diagnostic agent -> Check SAP Host agents (to enusre agent is running)
You may restart both Diagnostic and Host agent and check again after few minutes if data is updated.
Additionally please check below SAP notes which might help resolve the issue :
1890035 - Error "Host 'hostname' must have at least one installed Technical system" during the step 'Check Prerequisites'
1799138 - Solution Manager configuration check returns "The definition of Technical System '{SID}~{STACK}' is not correct: '{SID}~{STACK}' : Operating System '{OSName}' of Host '{hostname}' must have at least one Software Component Version"
Hope this helps.
Thanks & Regards,
Nisha

Post Install Steps & Initial Configuration

Hi,
I want to confgure system monitoring on solution manager ehp1 Please tell Post Install Steps , Initial Configuration. to proceed
Thanks,
Shashi

The transaction Solman_setup is not available before sp18.....it is available in EHP1 or SP18 onwards
Hope it clarifies ur doubt
Regards
Prakhar

Need complete Configuration steps for creating Shipment & Shipment costs.

Hi,
Can anybody explain the Configuration steps in IMG required to create Shipment (T Code - VT01) & Shipment costs (VI01).
Thanks in advance.
Manjunath.

hi
Route can be determined in sales order with the help of 5 parameters: depart country, shipping conditions in customer master record, transportation group in material master, destination country, and weight group.
Weight group plays a vital role. The purpose of route determination is like in scenario's where company will ship goods to the customer in various ways not only that it has optional of having n number of routes select the best one & based on his customer priority (time & money.) for sending samples company will go for air, for delivering ordered goods it can go for different mode of transportation & routes.
Route Determination: Departure country zonedestination country zoneshipping condition+ transportation Group+Weight Group ( Optional)= Route.(0VRF)
Plant determination in the sales order: System will search first for Customer material Info Record, if it is not maintained there it will check for customer master record, if it is not maintained here also system will search for material master record..
Configuration part:
SPRO > Routes Basic shipping functions  Shipping -LE -
Define Routes:
Define mode of transportation
Define shipping types.
Assign shipping types to mode of transportation.
Define Routes and Stages
Maintain Stages For All Routes
Route Determination:
Define Transportation Zones
Maintain Country And Transportation Zone For Shipping Point
Define Transportation Groups
Define Weight Groups
Maintain Route Determination in the combination of
a) Departure country/Departure Zone - maintained in shipping point configuration
b) Shipping condition from the sales order
c) Transportation planning group maintained in General/Plant view of material master.
d) Destination country/Transportation zone maintained in General view -Address of Customer master of Ship to Party.
SHIPMENT COST:
Shipment cost in shipping contains create the shipment cost doc., process the shipment, monitor the shipment, calculate the shipment and settle the shipment.
Shipment cost doc. contains calculate the shipment, assign to accounting, transfer to FI and settle the shipment cost.
Shipment cost doc. divided into header, item and sub item data.
We need to assign transportation planning point to com. code to calculate and settle the shipment cost.
1. Define date rules:- In this IMG activity you define the date rules that determine which dates are chosen for determining the pricing date and the settlement date and the sequence in which they are accessed. The dates can be, for example, the end of transportation planning or the start of lading.
2. Define and assign tariff zones:-In this IMG activity, you define the tariff zones and assign postal code areas to the tariff zones for each organizational key. The tariff zones are represent geographical influencing factors during the calculation of shipment costs.
3. Define no. ranges for shipment cost:-In this IMG activity you define the number interval for the shipment cost documents. When creating a shipment cost document, a unique number is generated. The number comes from the number range that you create in this menu point as the internal number range.
You can also create an external number range. The option to specify a number from the external number range when creating the shipment cost document is, however, not currently supported.
4. Shipcost types and item cat.:-In this IMG activity, you define the shipment cost types and item categories that contain all important control features for the shipment cost document, such as:
Number range
Status requirements for the shipment documents
Parameters for shipment costing
Parameters for shipment settlement
5.shipcost relevance and default for shipcost types:-In this IMG activity you assign the shipment cost types to the shipment types and set an indicator to show whether the cost type is relevant to shipment costing. You do this for every cost type in every shipment type. .
Example
For the 'individual shipment' shipment type, you set the indicator for the cost types shipment header and leg, but not for the cost types border crossing or load transfer point. You also assign a shipment cost type to the shipment type. When you create a shipment cost document, this shipment cost type is determined automatically.
6. Settlement:-
Certain control elements must be maintained for calculating shipment costs with the transportation service agent and for forwarding of shipment costs to FI and CO.
you can maintain these control elements and carry out the corresponding assignments.
-- Assign purchasing data
--maintain acc. assignment cat.
--automatic G/L acc. determination
--automatic determination of CO assignments
--invoices and credit memos
The process of calculating the shipment costs for a shipment.
Shipment costs:
The total costs involved in the shipment of a product. Not just pure freight costs, but also cleaning costs, insurance, and other costs as well
check this link
http://help.sap.com/saphelp_46c/helpdata/en/4f/fceb47b535d1118b3f0060b03ca329/frameset.htm
and
http://help.sap.com/saphelp_470/helpdata/en/d5/2285347860ea35e10000009b38f83b/frameset.htm

Managed system configuration step 8: No Admin User Id provided for TS SID

Hello experts,
I face the following problem in step 8 of managed system configuration (Configure automatically, SolMan 7.1 SPS 3):
All Activities fail (except Activate services) with the following Details message:
No Admin User Id provided for TS <SID> (ABAP)
Any hint?
Thanks and best regards, Basti

Hi Sunny,
I don't find anything where I can provide the user information. It just uses the actual user (SOLMAN_ADMIN). Can you tell me where to provide the user for this step?
Managed system configuration -> step 8 Configure automatically -> SSO Setup
Thank you, Basti

Need Help in Basic Configuration Steps

Hi,
I am trying with the scenerio for File To SAP , Please do help me in setting the Configuration step. I have completed the SLD and DESIGN section where I have done with the mappings and other required . Now when I start configuration What steps should I follow.Please do guide me for this..
I was Trying to import the Intergration scenerion from the Integration Repository for which I was exporting first the whole design for which I am getting the error
"Workspace was not defined for software component version......"
Appreciate your Help !! In Advance.
Thanks

Hey
u dont have to import anything from IR
just do the following steps in ID
>>sender communication channel(using FIle adapter)
>>receiver communication channel (using IDOC adapter)
>>sender agreement
>>receiver agreement
>>interface determination
>>Receiver determination.
thanx
ahmad
Message was edited by:
Ahmad

Discovery V2 System - Initial configuration Step Needed

Similar Messages

Maybe you are looking for