Discrepancy between IM stock and WM Stock

Hi experts,
We found there is discrepancy between IM stock and WM Stock.Before configuring WM storage types , IM Stocks are not syched. So WM stocks are showing less then IM stocks,. Now i need to synch up the IM stock and WM stock. what we needs to do. Can you please guide us.
Thanks & Regards,
Vamsi

OR
have a look at using transaction LX23 (provided you dont use HUM this should help you determine/ analyse and post any differences between IM and WM).
thanks,
A
LX23: Stock Comparison Inventory Management / Warehouse Management
Description
Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
In addition to specifying the area, you can also determine the extent of information to be issued. Here you have three options:
1. "With bin inventory"
In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
2. "All data on material"
Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
3. "Clear differences"
If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system. Negative WM stock figures and stock differences in returns will not be cleared.
If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
Prerequisites
The comparison is also possible for warehosue numbers managed on a decentralized basis.
Output
You receive a list with various materials. The list contains the following information, for example:
The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.
Edited by: WILSAQ on Aug 11, 2009 12:09 AM

Similar Messages

Difference between stock and non stock material

what is the difference between stock and non stock material. example of stock and non stock material?

Hello,
Stock Material
Material that is constantly kept in stock .A stock material has a material master record and is managed on a value basis in a material stock account.
Ex: Raw Material.
Non-stock Material
Material that is not held in stock because it is consumed immediately.
Ex: Office Stationary.
You need to create purchase order and accounting document for payment but the stock balance is always zero as it is issued out immediately to the various department.
Prase

What is difference between consumption stock and procumrement stock

Hello Masters,
I am new to materials management, can you please provide the differnces between consumption stock and procurement stock.
Can you please provide with examples
Thanks
KV

Refer below link
http://help.sap.com/saphelp_40b/helpdata/EN/75/ee0ac955c811d189900000e8322d00/content.htm

Diffrence between GR Blocked stock and Blocked stock

Dear Seniors,
Kindly tell me the difference between GR Blocked stock and Blocked stock ? in which case, we will move stock to GR blocked stock and blocked stock ??? kindly explain me please.
Regards,
JanaMM

Hi
Material can flow directly from goods receipt into consumption/usage or into the warehouse. However, It may also be placed into a blocked stock area first.
Using the stock type, you can post the material into quality inspection stock or into blocked stock. In both cases, the material is already managed in the stock. Alternatively, the material can be conditionally accepted. Conditionally accepted deliveries for a purchase order are recorded in goods receipt blocked stock (GR blocked stock).
The quantity posted into goods receipt blocked stock is not added to the inventory or managed as part of the inventory. It is only recorded in the purchase order history.
You would use goods receipt blocked stock, for example, if the vendor's certificate for the delivered quantity were missing, or if you wanted to inspect a small quantity of the material before posting the actual goods receipt.
When the conditions for acceptance are met, the material can be accepted into stock (for example, into unrestricted-use stock). The goods receipt is not valuated until this point.
If the goods are to be returned to the vendor, instead, they can be taken directly from goods receipt blocked stock. Note, however, that a return delivery is possible even if the material was already posted into stock
Blocked Stock is Valuated Stock. it is blocked for Certain reason.
Blocked stock (not usually available from an MRP perspective and no withdrawals are possible for consumption)
From blocked stock, you can withdraw only one sample, scrap a quantity, or post an inventory difference.
If you want to withdraw goods from blocked stock for consumption, you first have to carry out a transfer posting to unrestricted-use stock.
Thanks
Dipak
Edited by: Dipak J k on Sep 29, 2009 2:24 PM

Opening Stock and Closing Stock Calculation

Hi,
My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what are the tables and fields for calculating them??..
Thanks,
Sri
Edited by: Sri on Feb 13, 2009 8:33 AM

Hi
We have done a similar reports. One showing opening stock/Closing stock and another one showing all the transactions for a particular day. What we did was we developed a program to fetch data from MARD table for unrestricted, blocked & Qulaity stock(Our requirement talks only about these 3 stocks). And we scheduled the program exactly at system time 00.00 hrs with A class job.(today's closing day stock is nothing but tomorrow's opening stock)
And for the second report which needs to pick all the transaction for a particular day, we picked it from MB51 entries. It is nothing but query between MKPF and MSEG.
I hope this helps.

Opening Stock and Closing Stock fields and Calculation

Hi,
My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what are the tables and fields for calculating them??..
Thanks,
Sri

this is the code i wrote..
I had selected the data for the date entered and the previous date(l_date) also..
previous date for the opening stock.
now i am getting only receipts and issues correctly.. opening stock and the remaining
balance fields are not coming properly..please help me..
here rmenge for receipts,imenge for issues.
REPORT ZSTOCK no standard page heading line-size 180.
types: begin of ty_date,
       budat type budat,
       end of ty_date,
       begin of ty_mard,
        matnr type matnr,
        lgort type lgort_d,
        labst type labst,
        UMLME TYPE UMLMD,
        INSME TYPE INSME,
        EINME TYPE EINME,
        SPEME TYPE SPEME,
        RETME TYPE RETME,
       end of ty_mard,
       begin of ty_makt,
        matnr type matnr,
        maktx type maktx,
       end of ty_makt,
       begin of ty_mbew,
       matnr type matnr,
       bwkey type bwkey,
       lbkum type lbkum,
       salk3 type salk3,
       end of ty_mbew,
       begin of ty_mkpfmseg,
        mblnr type mblnr,
        budat type budat,
        bwart type bwart,
        matnr type matnr,
        lgort type lgort_d,
        shkzg type shkzg,
        dmbtr type dmbtr,
        menge type mseg-menge,
       end of ty_mkpfmseg,
       begin of ty_opstock,
       matnr type matnr,
       rdmbtr type dmbtr,
       idmbtr type dmbtr,
       bdmbtr type dmbtr,
       bmenge type menge_d,
       end of ty_opstock,
       begin of ty_output,
        mblnr type mblnr,
        budat type budat,
        matnr type matnr,
        maktx type maktx,
        bwart type bwart,
        lgort type lgort_d,
        shkzg type shkzg,
        rmenge type mseg-menge,
        rdmbtr type dmbtr,
        imenge type mseg-menge,
        idmbtr type dmbtr,
        dmbtr type dmbtr,
        bdmbtr type dmbtr,
        bmenge type menge_d,
       end of ty_output.
data: t_date type standard table of ty_date initial size 0,
      t_mard type standard table of ty_mard initial size 0,
      t_makt type standard table of ty_makt initial size 0,
      t_mkpfmseg type standard table of ty_mkpfmseg initial size 0,
      t_opstock type standard table of ty_opstock initial size 0,
      t_out type standard table of ty_output initial size 0,
      w_date type ty_date,
      w_mard type ty_mard,
      w_makt type ty_makt,
      w_mkpfmseg type ty_mkpfmseg,
      w_opstock type ty_opstock,
      w_out type ty_output,
      g_matnr type mara-matnr,
      g_lgort type t001l-lgort.
selection-screen begin of block b1 with frame.
parameters:p_werks type t001l-werks obligatory memory id pw.
select-options:s_lgort for g_lgort no-extension no intervals.
select-options: s_matnr for g_matnr.
parameters:p_date type mkpf-budat obligatory.
selection-screen end of block b1.
at selection-screen.
perform sub_validate_date.
start-of-selection.
data: l_date type sy-datum,
      l_row type i.
refresh t_date.
select budat from mkpf into table t_date.
sort t_date.
delete adjacent duplicates from t_date.
clear w_date.
read table t_date into w_date with key budat = p_date.
l_row = sy-tabix.
l_row = l_row - 1.
clear w_date.
read table t_date into w_date index l_row.
l_date = w_date-budat.
select    k~mblnr
          k~budat
          s~bwart
          s~matnr
          s~lgort
          s~shkzg
          s~dmbtr
          s~menge
          into table t_mkpfmseg
          from mkpf as k inner join mseg as s
          on kmblnr = smblnr and
             kmjahr = smjahr
          where k~budat between l_date and p_date and
                s~matnr in s_matnr and
                s~werks = p_werks and
                s~lgort in s_lgort.
if t_mkpfmseg is not initial.
sort t_mkpfmseg by budat ascending
                   matnr ascending.
select     matnr
           lgort
           labst
           umlme
           insme
           einme
           speme
           retme
           from mard
           into table t_mard
           for all entries in t_mkpfmseg
           where matnr = t_mkpfmseg-matnr and
                 werks = p_werks and
                 lgort in s_lgort.
select    matnr
          maktx
          from makt
          into table t_makt
          for all entries in t_mkpfmseg
          where matnr = t_mkpfmseg-matnr.
endif.
loop at t_mkpfmseg into w_mkpfmseg where budat = l_date.
   loop at t_mard into w_mard where matnr = w_mkpfmseg-matnr.
      w_opstock-matnr = w_mkpfmseg-matnr.
      if w_mkpfmseg-shkzg = 'S'.             " Receive
           w_opstock-rdmbtr = w_mkpfmseg-dmbtr.
           w_opstock-bmenge = w_mard-labst + w_mard-insme + w_mard-speme
                                + w_mard-einme +               w_mard-retme
                                - w_mkpfmseg-menge.
      elseif w_mkpfmseg-shkzg = 'H'.         " Issue
           w_opstock-idmbtr = w_mkpfmseg-dmbtr.
           w_opstock-bmenge = w_out-bmenge + w_mkpfmseg-menge.
      endif.
          w_opstock-bdmbtr = w_out-rdmbtr - w_out-idmbtr.
               append w_opstock to t_opstock.
              clear w_opstock.
   endloop.
endloop.
loop at t_mkpfmseg into w_mkpfmseg where budat = p_date.
   loop at t_mard into w_mard where matnr = w_mkpfmseg-matnr.
     clear w_makt.
     read table t_makt into w_makt with key matnr = w_mkpfmseg-matnr.
     if sy-subrc = 0.
      w_out-budat = w_mkpfmseg-budat.
      w_out-matnr = w_mard-matnr.
      w_out-maktx = w_makt-maktx.
      w_out-lgort = w_mard-lgort.
      w_out-mblnr = w_mkpfmseg-mblnr.
      w_out-bwart = w_mkpfmseg-bwart.
      w_out-shkzg = w_mkpfmseg-shkzg.
        if w_mkpfmseg-shkzg = 'S'.             " Receive
           w_out-rmenge = w_mkpfmseg-menge.
           w_out-rdmbtr = w_mkpfmseg-dmbtr.
           w_out-imenge = 0.
           w_out-bmenge = w_mard-labst + w_mard-insme + w_mard-speme
                                + w_mard-einme + w_mard-retme
                                - w_mkpfmseg-menge.
        elseif w_mkpfmseg-shkzg = 'H'.         " Issue
           w_out-imenge = w_mkpfmseg-menge.
           w_out-idmbtr = w_mkpfmseg-dmbtr.
           w_out-rmenge = 0.
           w_out-bmenge = w_out-bmenge + w_mkpfmseg-menge.
        endif.
           w_out-bdmbtr = w_out-rdmbtr - w_out-idmbtr.
               append w_out to t_out.
              clear w_out.
endif.
   endloop.
endloop.
write: / 'Material' , 12 'Description' ,40 'Location', 50 'Opening stock',70 'MvT',
          83 'Receipts' , 102 'Issues', 118 'Amount',135 'Balance Quan', 155 'Balance Amount'.
loop at t_out into w_out.
   write: / w_out-matnr, 12 w_out-maktx, 40 w_out-lgort.
   clear w_opstock.
   read table t_opstock into w_opstock with key matnr = w_out-matnr.
   if sy-subrc = 0.
     write: 45 w_out-bmenge.
    endif.
   write: 70 w_out-bwart,75 w_out-rmenge,92 w_out-imenge,
         110 w_out-bdmbtr, 130 w_out-bmenge, 150 w_out-bdmbtr.
endloop.
*&      Form SUB_VALIDATE_DATE
FORM SUB_VALIDATE_DATE.
    select budat
           from mkpf
           into table t_date
           where budat = p_date.
    if t_date is initial.
       message e001(zks) with 'select another date range'.
    endif.
ENDFORM.                    " SUB_VALIDATE_DATE
Edited by: Sri on Feb 18, 2009 8:31 AM

On hand stock and avilable stock

Hello experts,
Could you please tell me the difference between "ON HAND STOCK" and "AVAILABLE STOCK". How is it maintained in the system??
Regards,
Sanjay

Hi Sanjay,
Companies have stock on hand to safeguard against uncertainties and fluctuations in demand. However, holding an excessive amount of stock ties up too much capital and generates high storage costs. If there is insufficient on-hand stock, there is a danger that unexpected demand might arise that cannot be fulfilled.
Therefore, the SNP optimizeru2019s main purpose in stock planning is to keep the on-hand stock between specific upper and lower bounds.
In system:
http://help.sap.com/saphelp_scm50/helpdata/en/79/70833c8b079c2ee10000000a114084/content.htm
Availibility Stock:
The inventory on-hand minus allocations, reservations and backorders.
Thanks and Regards,
Naveen Dasari.

STOCK AND NON STOCK ITEMS

hi,
Here i want to know the difference between stock and non stock items.and give detail process flow for procuring both Non stock as well as stock items .

Dear Harshad,
Stock Items are the item for which we maintain stock in the system normally at various level which means the stock quantity gets updated in the system based on the movement done for that item
For ex if we make GR for 100 Qty of X item then its stock qty gets added into the system may be at plant /storage location level.Suppose out of this 100 nos if we issue 50 nos for production line then the stock at store reduces by 50 nos & added to production cost center by 50 nos.
Non stock material : NLAG: It stands for Non stock material
In customizing for basic setting in material type neither Qty update or Value update. No accounting data is maintained in Material master hence stock values are not updated. This material is procured only with account assignment.
In this case as soon as material is received Qty & value is posted to consumption account & statistic gets updated.
No updation of Qty or value takes place in Material master record.
For examle if we procure milk for canteen , its goes directly in canteen & stock of such items are not maintained
I hope this will clarify your concepts,
Vivek

Report on current stock and safety stock

Hi,
I want to have the report on current stock and safety stock.
In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
Thanks,
Kiran

You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
use tcode
MBLB to know stock at vendor.
MB54 - Consignment Stock.

Opening Stock and Closing Stock

Hi,
I have one requirement to get a opening stock and closing stock of all materials, based on the plant date and mat type.
Could u tell me the flow of tables one by one
Its is possible to get the opening stock and closing stock of all materials.
Please Guide Me.
Thanks & Regards,
    Dhanush.S.T

go through this....
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.

How to create a query to see Opening stock and closing stock as on particul

Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
Albaik

Hi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover      0IC_C01_Q0001
Range of coverage - quantity      0IC_C01_Q0002
Range of Coverage - Value      0IC_C01_Q0003
Range of coverage of finished goods - quantity      0IC_C01_Q0004
Range of Coverage of Finished Goods - Value      0IC_C01_Q0005
Range of coverage of raw materials - quantity      0IC_C01_Q0006
Range of Coverage of Raw Materials - Value      0IC_C01_Q0007
Obsolete Stock on Hand      0IC_C01_Q0008
Period-dependent requirement coverage      0IC_C01_Q0009
Value of stock on hand      0IC_C01_Q0010
Quantity of stock on hand      0IC_C01_Q0011
Material consumption      0IC_C01_Q0012
Material Movements      0IC_C01_Q0013
Consignment stock: receipts and issues      0IC_C01_Q0014
Valuated stock: receipts and issues      0IC_C01_Q0015
Material stock and movements      0IC_C01_Q0016
Material Movements (Healthcare)      0IC_C01_Q0020
Material Consumption (Healthcare)      0IC_C01_Q0021
Material Availability      0IC_C01_Q0022
Inventory Turnover Frequency (Value)      0IC_C01_Q0023
Consignment Stock Received and Issued per Unit      0IC_C01_Q0024
Material Consumption (Quantity)      0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity)      0IC_C02_Q0002
Range of Valuated Stock (Quantity)      0IC_C02_Q0003
Inventory Turnover      0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer      0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock      0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue      0IC_C03_Q0003
Receipt and Issue Stock in Transit      0IC_C03_Q0004
Receipt and Issue of Blocked Stock      0IC_C03_Q0005
Valuated Stock      0IC_C03_Q0006
Stock in Quality Inspection      0IC_C03_Q0007
Stock in Transit      0IC_C03_Q0008
Blocked Stock      0IC_C03_Q0009
Vendor Consignment Stock      0IC_C03_Q0010
Consignment Stock at Customer      0IC_C03_Q0011
Stock Overview      0IC_C03_Q0012
Stock Overview (as of 3.1 Content)      0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content)      0IC_C03_Q0014
Valuated Stock (as of 3.1 Content)      0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)      0IC_C03_Q0016
Inventory Turnover      0IC_C03_Q0017
Days' Supply      0IC_C03_Q0018
SUS: Vendor Consignment Stock      0IC_C03_Q0019
Scrap      0IC_C03_Q0020
Inventory Aging      0IC_C03_Q0021
Stock Overview - extended      0IC_C03_Q0022
Demand Supply Match      0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover      0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance      0IC_C03_Q0025
Stock Overview: Materials      0IC_C03_Q0030
Average Stock Value Over Time      0IC_C03_Q0031
Stock Overview Over Time      0IC_C03_Q0032
Range of Coverage Over Time      0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM

Report on pending order qty,opening stock, and closing stock

Any standard Report available on pending order qty against opening stock, and closing stock.
Points assured
Mohan

Hi Mohan
There is no report in standard SAP for stock in transit that is what you are refering to Pending order Qty & opening stock.
You can get report in ME2M, ME2L for pending PO's.
In MD04 you will get all these stock, PO Qty, & Closing stock but this is for individual material this has to be made customized report in reporting format same thing we have done in one of our project.
Regards

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Discrepancy between the confirmation and deletion of qRFC-LUWs

Hi experts,
When I started PC to loading data from CRM system,data loading stopped.I check the
Log.
"discrepancy between the confirmation and deletion of qRFC-LUWs" (Message no. RSQU016)
How to solve it? Thank you.

Hi Gavin,
<b>Please use Transaction code, SMQ1.</b>
Drill in to the queue and delete the respective queue.
Or use transaction <b>LBWQ</b>
to get to the same information. Select your queue and delete it.
Regards,
Aby

Stock and NON-Stock Items procurement

Hi,
Please let me know why classic scenario cannot be used fpor Stock items and Extended classic can be used for both stock and non-stock items.
What is the exact difference.
Regards,
Manu

Hi Sanjeev,
Thanks for the reply.
But if PR is transferred to SRM from MM and classic scenario is used and the resultant PO is created in MM then will transfer the PR with/without account assignment.
Pls let me know.
Thanks,
Manu

Discrepancy between IM stock and WM Stock

Similar Messages

Maybe you are looking for