Discrepancy between the confirmation and deletion of qRFC-LUWs

Hi experts,
When I started PC to loading data from CRM system,data loading stopped.I check the
Log.
"discrepancy between the confirmation and deletion of qRFC-LUWs" (Message no. RSQU016)
How to solve it? Thank you.

Hi Gavin,
<b>Please use Transaction code, SMQ1.</b>
Drill in to the queue and delete the respective queue.
Or use transaction <b>LBWQ</b>
to get to the same information. Select your queue and delete it.
Regards,
Aby

Similar Messages

Discrepancy between the confirmation & deletion of qRFC - LUWs

Hi Guys,
when I load master data load in delta, the load gets terminated & its throughing Application log, where I can see this error message:
When the datawas confirmed & deleted in the qRFC queue, the system found the discrepancy between the number of newly confirmed LUWs(6218 ) and the numbers of LUBs to be deleted(7517)
were more LUWs are to be deleted than were previously confirmed, a previous delete attempt was terminated.
The LUBs were confirmed but not completed deleted fromthe qRFC & tRFC tables.
The confirmation already ensures that the datais not transfered in to the BW again with hte subsequent request
Thanks in Advance
ram

Hi Ram,
i am also facing the same issue, can u please tell me how you resolved this issue.
My mail id : [email protected]
Thanks..

Hi In TB how can I delete or disable the wide pane between the list and message pane?

Hi
In Tb 24.6.0 how can I delete or disable the wide pane between the list and message pane?
Thank you.

You cannot delete it. It is part of the message pane.
You can make it smaller with this add on.
https://addons.mozilla.org/en-US/thunderbird/addon/compactheader/?src=ss

What is the difference between PO confirmation and PO response?

Dear experts
What is the difference between PO confirmation and PO response?
I see that:
BUS2203 Confirmation
BUS2209 PO Response
And the PO response will change the PO.
While what is the difference ?
Thanks & Regards,
Hayashi

Robin
Thank you very much for your response. It is very clear.
Could you help on explaining further on the difference between:
BUS2205 Incoming Invoice
BUS2210 Invoice Default
BUS2232 SUS PO Confirmation
BUS2233 SUS Confirmation
Thanks.
Regards,
Hayashi.

Using a KVM switch between the Mini and a PC

I've just bought a Mini to try out the whole Mac experience.
I'm having trouble getting a KVM switch to work with the Mac.
I have a Tripp Lite B034-002-R KVM switch to share between the Mini and my WinXP PC. The switch changes over to the other computer when you press NUM LOCK twice within 2 seconds. This is working in the PC (i.e. switching from the PC to the Mac is fine) but is not working in the Mac (i.e. the switch doesn't change from the Mac to the PC).
I have a MS "Natural Keyboard Pro" USB keyboard.
Is the NUM LOCK key somehow disabled or something on the Mac? I'm hoping there's some knob I can turn to get this working.
Thanks for your help,
Tom

I bought an IOGEAR GCS632U KVM switch to move between my Mini and Windows XP Pro PC. The keyboard is an Apple Pro. The switch was perfect for several days, then every attempt at invoking the hot key mode would fail; resetting the switch would not correct the problem. IOGEAR Support had me try another keyboard, which is the current standard Apple wired keyboard (the $30 one); it had the same problem as the Pro keyboard. Also we tried other things, but all failed. Sent the KVM switch to IOGEAR and they sent me a new one. After two days using the new switch, the keyboard malfunctioned; this time it was the backward delete key that failed. Same problem using other Apple keyboard. IOGEAR Support, after going through the same previous routine in which nothing succeeded in correcting the problem, tells me to return the switch and they will send me another. Based on my experience, apparently the GCS632U model has an incompatibility problem with (some?) Apple keyboards. This is confirmed by two posts on other discussion groups sites. Also, IOGEAR Support would almost admit that to be the case. They suggested that I use a generic keyboard, but I refuse to buy one just to use that KVM switch. IOGEAR should post the potential problem on their website as a warning.
Does anyone out there know from experience that a particular IOGEAR model does work with an Apple keyboard? IOGEAR Support says that they will send me a different model if I pay the difference. Or can anyone give me the brand name and model number of any KVM switch known to be compatible with Apple keyboards (particularly one that costs less thatn $75)? A ConnectPro 2-port USB KVM switch will work, according to another discussion group post. Any advice or information will be much appreciated.

Differentiate between SRM Confirmation and Confirmation Cancellation

We have a requirement to differentiate between SRM confirmation and cancellations. In POWL both looks same.
1. Is there any way we can assign different number ranges for confirmations and cancellations
2. Is there any other solution, from the POWL we can differnetiate these two documents
Thanks

Hi,
Check in the confirmation POWL status
1. SRM confirmation posted -- Status - Posted in the Backend
2. SRM confirmation cancelled -- Status -Document deleted.
Check this status
Regards
G.Ganesh Kumar

Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Discrepancy between IM stock and WM Stock

Hi experts,
We found there is discrepancy between IM stock and WM Stock.Before configuring WM storage types , IM Stocks are not syched. So WM stocks are showing less then IM stocks,. Now i need to synch up the IM stock and WM stock. what we needs to do. Can you please guide us.
Thanks & Regards,
Vamsi

OR
have a look at using transaction LX23 (provided you dont use HUM this should help you determine/ analyse and post any differences between IM and WM).
thanks,
A
LX23: Stock Comparison Inventory Management / Warehouse Management
Description
Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
In addition to specifying the area, you can also determine the extent of information to be issued. Here you have three options:
1. "With bin inventory"
In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
2. "All data on material"
Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
3. "Clear differences"
If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system. Negative WM stock figures and stock differences in returns will not be cleared.
If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
Prerequisites
The comparison is also possible for warehosue numbers managed on a decentralized basis.
Output
You receive a list with various materials. The list contains the following information, for example:
The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.
Edited by: WILSAQ on Aug 11, 2009 12:09 AM

Differential pricing between the US and UK/anywhere else

I'm just curious... can anyone throw any (rational) light on the price discrepancy between the US pricing and the prices for everyone else?
What are the actual differences between the UK and the US versions of CS4 that demand such a discrepancy? Since (for the UK at least) the language is the same, what constitutes a localised version that is worthy of these price differences for upgrades...
$599 CS3-CS4 against £515 ex VAT in the UK (equates to $945 give or take a few cents)
I know some smart response will be "you don't have to buy it", but as a professional, freelance designer I'd have to disagree with you... please just accept that otherwise we could go wildly off topic.
I don't object to paying for software, I just hate to feel taken advantage of because of where I live.

Since the "powers that be" saw fit to turn off the forum where I posted my issue, I'm going to repost it here:
Hitting a brick wall with Adobe Customer Service . . .
Alon - 05:19pm Sep 23, 2008 Pacific
This probably isn't the right forum to get feedback, but, it's the closest I can find . . .
I was left on hold today for over 2.5 hours, waiting for a manager, before the call was dropped. NOT FUN!
Basically, it's an upgrade issue.
In July, I upgraded to CS 3.3 (with Adobe announcing that this was the latest and greatest upgrade). I forked out $600 -- of course, assuming since it was the latest and greatest, that it would remain the latest and greatest for a reasonable amount of time. OOPS! Wrong assumption! 2 months later they announce another "latest and greatest" with CS4.
Up until July, I avoided the upgrade because of the CS3/Leopard compatibility issues. Even with 3.3, I have to reboot (on average) a couple of times a day to re-stabilize my OS. Adobe products bog down the OS and grind away on the hard drive to the point where all applications begin suffering.
So, all-in-all, I purchased a "brand new release" 2 months ago for $600, and there's another "brand new release" announced today. And they want me to fork over another $440 for that one -- every sales and customer service rep saying: "There's nothing I can do."
Was on with customer service again for another 37 minutes while I was typing this. Guess what? That freaking call was dropped just this second.
That's 2 dropped calls over a half an hour, and another dropped call over 2.5 hours.
Frustrating.
Been using Adobe products since 1988, and this is the first time I am unhappy with how I've been treated.
How about the usual array of gadflies stay out of this one and allow people who have legitimate concerns about this sort of thing have some reasonable communication.

What's the difference between the ssd and hd?

I'm in the process of buying a Mac book pro but wanted to know and understand What's the difference between the ssd and hd?

DDHeadley wrote:
What's the difference between the ssd and hd?
HD = hard drive, several metal platters stacked and data read/written magnetically.
Pro's - less expensive and higher capacity of storage. Can scrub the drive of unwanted data. Unlimited write capability.
Con'- bit rot can cause data and operating system to not be as reliable, mechanical moving parts means you can't move the machine while it's on.
SSD = Solid State Disk, basically memory chips that can store data in a permanent fashion without power (like Random Access Memory needs)
Pro's - faster read/write speeds in most cases. Shock resistant makes them ideal for portable uses.
Con's - new technology issues, one cannot securely erase the data on them, unless it's ground into a fine powder. Limited write capability means they will wear out eventually like USB thumb drives do. Wear leveling (TRIM) is used to spread the writes evenly across the drive to maximize it's lifespan.
If you can respect the machine, take care of it and not move it while it's on, or need to scrub the drive of unwanted data, or need higher capacity of storage without paying a fortune for a very large SSD, then a HD makes a lot of sense.
It really comes down to your privacy, do you want a machine you cannot delete files off of?
Do you want to carry around a machine that has all your dirty secrets etched in it for anyone with the right software to uncover?
A computer is a personal machine, why it's called a Personal Computer. We all do things we sometimes are later ashamed of and want to erase all memory of it.
Can't do that with a SSD, it knows all and you will be forced to destroy the machine to rid it of the unwanted data.

Cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?

Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo.

Tethering via USB between the Z10 and a laptop or PC & and few Comments About the Playbook Tethering

Tethering via USB between the Z10 and a laptop or PC can be a bit tricky.
On the Z10 do the following:
On the Z10 go to the Settings.
Go to Network Connections.
Go to Internet Tethering.
Select USB.
Turn on Tethering.
On the computer run the Blackberry Link software for the Z10:
Once the software starts, connect the Z10 via the USB cable to the PC.
Open the browser.
You should now be able to cruise the net, and do emails.
With the Playbook, the Bluetooth tethering does not yet work. This may be an OS or communications issue.
The best way to tether the Playbook for full speed and functions is using the WiFi option. Simply turn on the WiFi hot spot option and follow the instructions. The Playbook WiFi must also be properly set up. The Z10 USB and Bluetooth tethering mode must be turned off when using the WiFi mode. You can leave the base Bluetooth active on the Z10. There is a lot of available information about using the WiFi hot spot from the Z10. The process is very similar to the past models of Blackberry phones.
If you use the Bridge mode to tether, the Playbook email client software does not work very well. The browser will work fairly well, but slower with the Bridge mode. With WiFi the Playbook can brows at very high speed. With Bluetooth it is restricted to about 1.5 to 2.5 mb/sec. Take care that the WiFi mode burns through battery time very fast on both the Playbook and the Z10. Using the Bridge mode uses less power consumption than WiFi.
To use the Bridge mode, make sure the Playbook and the Z10 are first Bluetooth mated. Also the Bridge mode has to be set up between the devices. You will have to first install the Bridge software in to the phone for this to work.
I did extensive testing between the Z10 and the Playbook. They function well together as far as Internet and email are concerned, in consideration of using either tether or Bridge, depending on what you want to do.
From what I understand the Bridge mode uses some compression. It will not be as fast as using WiFi or Bluetooth tethering. The data cost using the Bridge mode is probably a bit lower because of the compression.
As far as the Bridge phone options are concerned, these features are not yet available. From what I read in a number of articles there are going to soon be some updates coming out to fix this. The Bridge options are a big part of the tablet application with the Blackberry phone. This was the big original application point of this tablet, otherwise any generic tablet would do the job.
Jerry G.

From the look of this thread it appears that no one outside of Canada uses an OS 10 BB yet. 247 views and no comments or help ? I'm sure I'm not the only BB user that uses Tether. If BB doesn't care to help then this will just be another nail in the corporate coffin that has been projected.
Maybe we need different forums for US users as the Canadians don't seem to have the same issues or cares.
The whole idea of the app Tether is not to have to pay the outrageous tethering fees that US carriers charge and it has worked well for years. But it can't work and won't work in the future without help from BB and the BB community.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

Discrepancy between the confirmation and deletion of qRFC-LUWs

Similar Messages

Maybe you are looking for