Disk utilities repair permissions

I am trying to repair permissions on my imac OSX2.8. When I get into the repair permissions on the start up disk everything seams fine. The indicator bar starts filling up with the blue and white rotating filler. But thats as far as it goes. It will not stop rotating to completion. Does anyone have any idea what the problem might be? Any help would be appreciated. Sandy
power pc G3   Mac OS X (10.2.x)  

Hi Donald,
Thanks for the quick reply. I went and downloaded onyX and it came with this extension. onyX_1.3.1.dmg.gz. I tried opening it with disk copy, mount and pacifist and none of these programs would open onyx. I had this problem before where nothing I downloaded would open and I thought that by repairing permissions I might be able to resolve the problem but I guess there is something more going on.
I am using firefox v1.0.5 as my browser. Do you have any other suggestions?
Sandy

Similar Messages

  • Disk Utilities - How do I create a new Start-up Disk to repair permissions

    I believe that the Disk Utilities program updates with Software Updates. To run the new Permission Repairs, I believe I am supposed to boot from a separate disk to make repairs to the master system on the computer. How do I make a separate, stand-alone disk that will launch my computer and allow me to run the new Permission Repairs.
    Thank you,
    Charles

    Normally you Repair Permissions while booted from your Boot Drive, but in a pinch, you can do it from the Install Disk.
    Repair Permissions uses the list of PKGs in Library Receipts to get it's info, so if you must do it from the Install Disk, you should do it once again from the Bot Disk.
    Is it not booting from the Hard Disk?
    Only Disk Repairs, not Permission Repairs need to be run from other than he Boot Drive.
    DiskWarrior can fix both Disks & Permissions if you get the CD...
    http://www.alsoft.com/DiskWarrior/

  • Not permission to install Lion into my iMac HD even after running Disk Tools repairing permissions ???

    Not permission to install Lion into my iMac HD even after running Disk Tools repairing permissions ???

    Post the exact text of the error message you get.

  • Disk utility repair permissions stops altogether

    I tried running Disk Utility Repair permissions and received a grey message box saying it stopped repairing permissions because of the following error:
    Error: The underlying task reported failure on exit.
    This same error message was repeated in the usual information box that disk utility uses to provide detail about what it is doing.
    I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items. I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task). When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
    I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
    As a not unrelated issue when I attach my ipod touch, itunes says that it cannot recognize this ipod, then after about the third time simply doesn't acknowledge my itouch exists.
    everything was working well until i did this large change permissions operation.
    So does anyone have any idea what I have done (wrong) and how I can fix it?
    thanks
    John

    John Fountain wrote:
    I believe the problem occurred because I selected Macintosh HD and added another user (myself) to read/write in the disk permission section of the information window, and I also applied that to all enclosed items.
    Uh-oh. You completely trashed your whole system by doing that. Boot up from your Leopard DVD and restore that last Time Machine backup that was made before you made that mistake. If you don't have any backups you will have to reinstall Leopard.
    I did this in the first place because of repeated attempts and failuire to install the latest version of skype into my applications folder (being told that I didn't have enough permissions to complete the overwrite task).
    When that happens, just trash the old application first, then drag in the new one.
    When I tried verifying the disk I received the error message "ERROR: could not freeze volume permissions denied"
    I switched users to a specific administrator account that I reserve for troubleshooting, but got the same result when I tried running disk utility.
    Changing permissions on the HD and applying to enclosed items hosed your whole system. That's what's causing all your problems. It's doubtful that you will be able to repair it. Restore your system from backup, or reinstall.

  • Disk Utility Repair Permissions conflict for ./Private and ./private

    After applying the latest Security Update 2008-003 (PPC) (http://www.apple.com/support/downloads/securityupdate2008003ppc.html), Repair Permissions in Disk Utility has conflicting requirements for permissions on ./Private and ./private. One of them is wrong. This diagnostic needs to be fixed.

    Unless you are using the case-sensitive file system, they are not different directories.
    I have not yet installed this update, so I haven't seen this issue. I would say don't worry about it. In over six years of using OS X, I have never encountered anything in Repair Permissions that actually needed to be fixed. But I have seen plenty of nonsense like this, where it references the same file using different names, with different modes associated with the various names.

  • OS X  System Freezes While Running Disk Utility repair permissions

    While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine.  What is going on?

    Thanks for your response, I only have one disk. 10.5.1 I have 10.6 on usb drive. I will try running Disk Utility from the first DVD and instead of repair permissions try to repair your drives.  The reason I was repairing permissions is I have an app called video converter and when I opened it I got an error window.  Ok I will try repair disk. If that doesnt work I guess I will have to reinstall the os? Is that right? Ok, here I go to try it.

  • Ran disk utility repair permissions....now I can not open any applications on my Mac mini

    my Mac mini (mid 2011. OS X 10.9.1). Was running very slow so I ran repair permissions...after re-booting my computer I can not open any apple applications.  I keep getting a pop up window that says " finder quit unexpectedly". When trying to open safari " safari quit unexpectedly".  I can open skype, google chrome.   The computer indicates that wifi is on and connected - however I can't seem to log into Skype or access any web pages.  What to do next?
    One more thing, I keep getting pop up windows asking for passwords for different items if or keychain...I have tried to put in my password, but that doesn't work. Not sure what password it is looking for but the window won't go away even when I hit cancel

    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive.  OS X: About OS X Recovery
    Then see if you can restart normally.

  • Disk Utility Repair Permissions ?

    Hello,
    I'm experiencing a persistent disk permissions repair issue using disk utility.
    With each re boot I get the following needing to be repaired...
    "Group differs on "private/etc/cups", should be 0, group is 26."
    I repair and re-run Repair Permissions again to find all is ok - however it comes back again when I re-boot.
    What can I do to get it to go away and what is it?
    thank you for your time.

    Reports of "spurious" information in Repair Permissions are wide enough that there are Apple articles on the reports for Jag and Panther (like here. Admittedly, they are much fewer in Tiger and Leo.
    "cups" is a printing subsystems, so some driver you've installed may be "taunting" Disk Utility. If you can print, you're OK.

  • Disk Utility repairs permissions; 1 hour later they're un-repaired again.

    (March 2009 24" iMac. Lion 10.7.3)
    I repair permissions on Macitosh HD (boot volume)  every-other week.  I've noticed that the same permissions seem to need repair each time.  Here are the last seven lines from the Disk Utility window from the May 19 run:
    One hour later, I repeated the operation.  Here are the last seven lines:
    I might be overly sensitive, but I detect certain similarities between these results.  In fact, it looks like Disk Utility repairs exactly the same permissions every time and those permissions are corrupted shortly after they are repaired.
    What's going on here?   Should I be alarmed? Or should I panic?

    I'd like to delete this post (if I knew how).  There are several other threads on this topic, and other contributors report exactly what I observe.  It turns out it's a harmless artifact of upgrading from 10.5 to 10.6 to 10.7, rather than doing a clean install of Lion.  This article is reassuring: http://support.apple.com/kb/TS1448
    I shoulda searched more thoroughly before posting.

  • Problem With Disk Utility - Repair Permissions

    Is anyone else having this problem. When I go to verify or repair permissions using Disk Utility, it behaves nothing like it did in Tiger. For 1, takes like 10 minutes... took about 2 before. And 2, I keep getting a Warning message:
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    I installed Leopard doing an Erase and Install.... so this was a fresh - full install. What's the deal?

    Oh for the love of god, it begins again!
    Folks, chill out!
    Leopard introduces a completely different "installer package receipt" format called a flat file format based on SQLite. The database file on my Mac (from a pre-release version of Leopard) is the following:
    /Library/Receipts/db/a.receiptdb
    The file is 140 MB in size and contains a ton of information. Sorry, I'm currently burning my final copy of Leopard to a DVD otherwise I'd run Repair Permissions here on the pre-release version I'm currently running and comment on the results. I did notice that it takes a while longer than in Tiger. It's quite possible that Repair Permissions in Leopard is looking at many more things than just the basic file permissions that it did in Tiger, Panther, or Jaguar.
    Access Control Lists (ACLs) are an additional, advanced type of permission setting for files and directories. The fact that Repair Permissions in Leopard even mentions ACLs suggests that it's concerning itself with a great deal more things than it did in Tiger, Panther, or Jaguar.
    I didn't get that message about ARDAgent in the pre-release versions, I'll take a look at it more once I finish burning and installing the release version.
    ARDAgent is part of Apple Remote Desktop, and 'SUID' refers to a "SetUID" executable. (For more info on SetUID, you might check out my page on http://homepage.mac.com/mdouma46/fdup/fdup.html where I wrote a utility to repair the permissions of Jaguar Disk Utility's Repair Permissions feature. All that warning is saying is that Disk Utility isn't going to alter the permissions on the file. I honestly don't think it's anything to worry about, nor are any of the other messages that it reports.

  • Disk Error during Disk Utility Repair Permissions

    I was wondering if anybody else has experience a Disk Utility Internal Error while repairing the permissions on their system disk. What did they do to correct this issue?
    A snapshot of the error can be viewed at:
    http://www.enabled.com/~noah/pictures/Picture1.pdf
    Thanks in advance.

    Tom
    I sympathise if you are on dialup! Here is the post you need (originally posted by Mac Fool):
    Just to catalogue the solutions listed above
    Here's what I did, and it worked fine.
    1) Move iTunes onto the Desktop.
    2) Run Disk Utility
    3) Go to HD>Library>Receipts and trash all iTunes .pkg files EXCEPT for iTunesX.pkg and iTunesPhoneDriver.pkg
    4) empty Trash.
    5) move iTune from Desktop back to 'Applications'.
    Hey presto. you should now be able to repair permissions again.
    HTH
    Just as Beavis posted above
    BTW, the link "here" does take me directly to the post, but clearly it loads the entire topic first.

  • Disk utility - repair permissions keeps reporting same issues

    my machine has been unstable for a while, and i thought it was time to repair permissions.
    normally, after being run a couple of times, there are no more to be repaired. however, this time, the same 35 lines of permissions being changed are displayed over and over. also after rebooting.
    1. why aren't the permissions finally corrected?
    most issues concern 'System/Library/CoreServices/Front Row.app/Contents', 'System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins' and a couple of warnings that suid-files are changed and won't be repaired.
    2. i never used front row, - what's happening?
    3. what's with the suid-files?
    4. will reinstalling leopard help my situation?
    5. if i use time machine to restore, how can i be sure the problems don't persist? or 'get back in'?

    why aren't the permissions finally corrected?
    Apple changed the structure of some of its packages without updating the repair permissions mechanism. Until and unless they release a patch, nothing done will stop those messages from appearing. Disregard them.
    i never used front row, - what's happening?
    You installed a package which updated it.
    what's with the suid-files?
    Those messages are normal.
    (43205)

  • Disk Utility: Repairing permissions with Warning: SUID file ...

    I get always some warnings when I run the Repair Disk Permissions under my Leopard.
    Does somebody know how to fix these warnings?
    Thanks,
    JO
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Permissions differ on "Library/Printers/hp/Utilities/HP Printer Utility.app/Contents/Frameworks/HSDCommonLib.framework/Versions/A/Runtime/hppaa uthtool", should be -rwxrwxr-x , they are -rwsr-xr-x .
    Warning: SUID file "Library/Printers/hp/Utilities/HP Printer Utility.app/Contents/Frameworks/HSDCommonLib.framework/Versions/A/Runtime/hppaa uthtool" has been modified and will not be repaired.

    Thanks for the it is appreciated. Have a happy holiday and a great New Year!

  • Messed up permissions, then fixed but now disk utility repair perm greyed..

    So I had changed ownership and permissions on an eternal drive, then couldnt see it so I typed the following in terminal to fix:
    chmod 775 "/Volumes/volumename/"
    That worked, but now when I go into disk utility, both the verify and the repair disk permissions are greyed out on that drive.
    Any ideas?

    That worked, but now when I go into disk utility, both the verify and the repair disk permissions are greyed out on that drive.
    Those commands will only be available if the drive has a bootable Mac OS X system. If the drive is set to ignore ownership or permissions, select it in the Finder, choose Get Info from the File menu, and turn the option off.
    (30708)

  • Why does Disk Utility repair permissions not run?

    I'm trying to verify and/or repair disk permissions on my RAID0 array but the utility only briefly flashes the progress bar and does nothing.
    Logs show a whole lot of nothing:
    2011-09-28 17:00:44 -0700: Disk Utility started.
    2011-09-28 17:00:52 -0700:
    2011-09-28 17:00:53 -0700:
    2011-09-28 17:00:54 -0700:
    2011-09-28 17:00:54 -0700:
    2011-09-28 17:05:29 -0700:
    2011-09-28 17:05:30 -0700:
    2011-09-28 17:05:30 -0700:
    2011-09-28 17:05:30 -0700:
    Each time is an attempt at clicking on verify or repair.
    Any idea why that is?

    Turns out this is a Lion issue and only happens on RAID arrays. Apple is looking into it.
    For anyone with the same issue, the command line version of disk utility does work, i.e:
    diskutil repairPermissions /

Maybe you are looking for