Disk Utility Failed, Mac HD not working and cannot reinstall OSX

Hi,
I am totally frustrated.
Was working on capturing video using Final Cut Pro and the application froze. After repeated attempts, I kept getting the message to restart the G5.
I tried reinstalling Final Cut Pro - and installation failed. I ran disk utility first aid and found an error on the Mac HD (Startup Disk). So I restarted machine from the DVD (pressing the C button when restarting) and ran disk repair from the DVD OSX Utility. Still got the error that "First Aid Failed" Disk utility stopped repairing Macintosh HD because the following error was encountered. The underlying task reported failure on exit. HFS volume checked 1 volume could not be repaired because of an error. Repair attempted on volume 1, 1 volume could not be repaired.
Then I tried reinstalling OSX onto a second internal SATA HD. Installation failed. Try installing again.
So now what do I do?
I am running Mac OSX 10.4.9
Please help...urgent.
Thanks
MQ

Thanks for the answer...that's what I was thinking.
The following are various issues I am considering maybe the cause:
1. Memory - I installed 2GB a few weeks ago - third party.
2. External HDs - I installed an external Maxtor 1.5TB drive 3 days ago.
3. I live in Africa - and power frequently gets disrupted - even though the machine is on a "solatek" (power stabilizer and high end protector against spikes) - 2 days ago my UPS was down and for repairs - and we had three power outtages.
Lastly, as I mentioned I live in Africa - Mombasa - Apple tech support is almost non-existent here...so I am hoping I can resolve this without having to ship it abroad.
Please help and thank you...
MQ

Similar Messages

  • ABC player , though downloaded, is not working.  Cannot reinstall.  Was fine last night.  ???

    ABC player , though downloaded, is not working.  Cannot reinstall.  Was fine last night.  ???

    You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments. 
    http://support.apple.com/kb/HT4199
    If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. 

  • Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

    Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy.  What should I do?
    I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM.  But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install.  It is like an infinite loop!
    Please, someone help!
    Thanks!

    HI gener7!
    I'm sorry but I am not on Creative Cloud.  I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application.  My AAM version is:  8.0.0160
    The link you provided was the update that I wanted to install but it does not work.  A window shows up during that install that says:
    We've encountered the following issues.
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.
    and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
    Thanks!

  • Email not working and cannot verify to open account

    I am trying to set up iTunes account and the email address I used is not working so cannot verify this how can I change my mail address as I am unable to log in without verifying

    Hello Lynnbo46,
    Thanks for using Apple Support Communities.
    If you have not received your Apple ID verification email, please follow the steps in the article below.
    If you didn't receive your verification or reset email - Apple Support
    Take care,
    Alex H.

  • Autosave not working, and cannot Save Version in any Mac app

    I am no longer able to save a version in a Mac app in Lion.
    I was working in TextEdit and suddenly got an error message telling me the document could not be autosaved. I had saved it once manually. Doing a Command-S generated another error message saying the file could not be saved.
    I tried duplicating the file, and the duplicate could not be saved after the initial save. Moving the file to another folder didn't help. I also tried putting it in a Dropbox folder - that didn't allow me to save it, either.
    I did a Repair Permissions and that didn't work. I logged out, powered down - no joy.
    I created a test account (administrator) and I was able to save there, and auto save was working.
    I CAN save documents in apps that don't work with Lion's autosave normally. For example, Word 2011 will save just fine. But TextEdit, Pages, etc. will not.
    Any help or suggestions would be appreciated.

    I have the same problem as decribed by LeVeau, while working with Pages. This started to happen a couple of days ago. Unfortunately, I could not solve the problem the way he did. I booted my MacBook hitting CMD-R, had to unlock my startup-disk because it is encrypted (as hinted to in the comments of his blog post). When I repair permission, the windows notes "Running" and the turning circle just forever. It never stops. I let it run through a whole night, nothing happend. When I close the window, I get no warning or message or whatsoever. When I reboot, the problem is not solved. I also tried Applejack to solve it, but it apparently can't work on the encrypted disk in single user mode.
    Does anyone have an idea on what I am doing wrong or what else I could try? The plist-files mentioned above are not in my library, so I could not delete them. I would be greatly thankful for any help.

  • I deleted chrome as it did not work and cannot seem to find how to download again

    I have trashed my google chrome and google earth as they would not work on my new computer.  I cannot get them to download even after I have trashed the old ones out of my applications.

    for some unknown reason this time it worked  i am working with a new mac and so some of the icons are different it seems.  anyway i downloaded it from another browser double clicked my download on the dock and this time when the icons appeared i was asked if i wanted to open files from another source  yes and voila.  dragged the icons to my dock and they work!!!!

  • My upgrade of iPhoto has not worked and cannot find my photos, any advice?

    Hi there
    I was trying to find out why my photostream was not working, ie I could not see images taken on my iphone 4S on my macbook. I looked into it and it seems my iphoto was an old version so I needed to upgrae it via the App Store (cost me around GBP 10.00) I followed all the instructions but the new version of iphoto does not seem to have located my images and I get the whirling circle in the centre of the screen (as it if it is waiting to do soemthing). This has gon on for days. I have shut down and restarted but nothing has happend. I am am sure my photos must still be on my Macbook but I cannot see them.
    Has this happened to anyone else?
    Any advice would be gratefully appreciated.
    Kind Regards
    S

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • HELP! Services not working and cannot phone 150!!

    Hello,  Just wondering if anyone can help, I paid my phone bill this morning of £117 and the services got cut off 6 hours later. I cannot even call 150! I am really stressing out as I can't call anywhere in case of an emergency.  It comes up "EE" beside the signal bar rather than the normal "3G" which is when I am able to make calls/texts. It is impossible to get in touch as I can't phone 150 and my landline does not work. Thank you,Amanda

    It takes about 5 days for a payment to reach your a/c. Perhaps you got cut off cuz you had payments outstanding?

  • I downloaded 4.0 when prompted, but it did not open upon completion and now shortcut does not work and cannot find file to run 4.0 in the firefox folder. Tried restarts and reinstalling 3.6 which now also won't work for me. Ideas?

    I downloaded 4.0 when prompted yesterday. Seemed to download normally but did not automatically start following download even though that option was checked. The shortcut now is broken and efforts to fix it fail because the file cannot be found. Checked the firefox folder and do not see a file to run firefox. Tried restarting twice with no luck. Then tried multiple times to reinstall 4.0 with no success. Then tried uninstalling and reinstalling 3.6 with same result.

    OK. Got it figured out. Disabled my virus scanning software and the download worked perfectly. Should have thought of that before now.

  • Selection tool not working and cannot select layers

    Just loaded up cs5 w/ indesign and tried to start using indesign. To my dismay the selection tool and the layers will not high light when pointed to or work when clicked upon. these are the only tool i've found not to be working so far. 

    Are you using Windows 7, if so, see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)
    If not, what is the OS, and what language is the installation of ID?

  • HT1414 WHY DOES MY IMESSAGE NOT WORK AND CANNOT ACTIVATE MY PHONE

    I HAVE AN APPLE IPHONE AND CAN NOT GET IT TO USE IMESSAGE AS IT SAY WAITING FOR ACTIVATION BUT WHEN I SEND A MESSAGE IT SAYS ERROR

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair files and i needed to format hard drive and start again. now nothing works

    have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
    comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. help

    Erase and Install
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
    5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Disk Utility says of USB Drive - "This partition can't be modified" "This disk is not writeable and cannot be partitioned"

    Several months ago I bought a 64GB PNY USB memory stick to transpord data quickly.
    It seemed to work fine.  I could format it as a Mac partition and use it.  I hardly ever need
    it so I just put it away.
    Today I wanted to use it to put a file on and take it to the Kinko's/FedEx to print, and I
    find I cannot mount it on any of my computers, iMac, MacMini or MacBookPro.
    In Disk Utility virtually everything is greyed out.
    Disk Utility says: "This partition can't be modified" "This disk is not writeable and cannot be partitioned"
    If I try to mount it, it says "This disk cannot be mounted"
    There is no physical read-only switch or setting on the disk that I can see and it is very small.
    I has a Mac OS installed on it, so I wonder if that is a problem?  I should be able to write over that
    or reformat it I would think.

    Thanks for these replies. 
    I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive.  I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup.  Any recommendations on good and affordable backup software to do a backup of my TM backup?
    One other question: I seem to encounter problems like this pretty frequently.  I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore.  (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.)  I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data.  Is it possible (even likely) that there's something in my data causing this recurring problem?  If so, is there anything I might be able to do to try and pinpoint and address this problem?  I'd love to go one year without having to wipe/restore my machine!
    For a while I thought I just had bad luck.  But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data.  It's the one constant since I've had 3 different machines over this same time period. 

  • My Macintosh HD partition is damaged and the disk utility failed to repair it

    I cannot boot anymore after I tried to repair the disk with Disk Utility after my Mac became very slow.
    This is the second time it happened to me in a week with the same symptoms. When I try to boot, I see a gray screen and the computer just stops
    When I use the recovery partition, the disk utility fails to repair the disk, stopping after failing to fix the catalog file.
    I started to use TM to backup my data after erasing the disk and reinstalling Mountain Lion but I wonder if my hard drive is damaged because the same problem happened twice. (Thanks TM for keeping my data safe this time)
    Any advice or ways to fix that once and for all ?
    PS : The worst is that i can still boot with Bootcamp to Windows, not very useful though

    rpignard wrote:
     Any advice or ways to fix that once and for all ?
    Since your Recovery HD and Windows partition work fine, the problem is located in your Macintosh HD partition and I very highly suspect it's bad/failing sectors that's to blame for your troubles.
    This can sometimes occur if the computer was moved while the hard drive was in operation, else sectors fail all by themselves, or if the drive is having mechanical issues, which you problem will continue no matter what you do.
    This time when you use Recovery > Disk Utility to erase the Macintosh HD partition, use the middle secure erase option, not the far left or right options (the right will work also just take a really long time)
    What your doing is with the middle secure erase option is called a "Zero" write, which Disk Utility will write 0's over all the bits in that partition. When it's done it will read it back for confirmation and when it does so, any bits that are failing will be mapped off by the drive. Hopefully this will resolve the issue without needing a drive replacement.
    Once that is completed, reinstall OS X from Recovery, any programs from original sources, files only from backup and your problems hopefully should disappear.
    What happens is if your data gets corrupted on the boot drive by failing sectors, it gets transfered to TimeMachine (or to bootable clones) and when you restore your right back to square one. So it's important to rule out that possibility with original installs of OS X and third party programs.
    If your problems continue, then it's possibly a problem  with third party at boot kernel extension files, (and the catalog problem was yet another one) so to solve this you need to make sure all your third party software is updated and works with your current OS X version.
    A trick is, if you get gray screen at boot time, is to hold the Shift Key while booting the computer, this will disable a lot of things and allow you to fix the third party software issue.
    What I suggest you do is have multiple backup systems, including hold option key bootable clones, this way if your TM drive gets corrupted you can go back in time to a saved state on the clone, restore that and then your files from the TM drive.
    Most commonly used backup methods

  • I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    Hi Joe,
    Thanks for your quick response.  I should add....it worked before.  When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac.  Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed.  I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD.  SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously.  I do not remember changing any settings since then. 
    When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc.  The problem is my DVD is all miscellaneious files/documents.  I just want to be able to see them in the finder.  I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents.  Again, I was able to open them previously and the DVD is not corrupted in any way.  
    Any additional advice? 
    Thank you!

Maybe you are looking for