Dispatche problem

Hi
I have ECC6 IDES version was working fine last 3 months . i have just added two profiles in RZ10
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
it was not reflecting on so i thought i will restart server so i did it. since then my server is always in yellow state. my Abap , J2ee table are blank and i monitored couple of time when i start server first all table start in RUN state then Ended and disappears then dispatcher goes stopped.
Things i did to resolve this but didn't work
1) tryed to revert back old profiles in OS level
2) Increases j2ee time out ( 600 to 6000)
3) started data base at command level using connect/@ PIS as sydba and the mounted database and then started management consol but still same problem continues.
Can some one help me quickly ...
trc file: "dev_w0", trc level: 1, release: "700"
M
M Tue Sep 25 11:14:07 2012
M calling db_connect ...
C Prepending D:\usr\sap\PIS\DVEBMGS40\exe to Path.
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
C Attaching to DB Server PIS (con_hdl=0,svchp=000000000A7B8AA8,svrhp=0000000013111918)
C Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
C Now '/@PIS' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000A7B8AA8,usrhp=000000000A7B3BD8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
C Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
C Now 'SAPSR3/<pwd>@PIS' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance PIS is running on DEVSYS with ORACLE version 10.2.0.1.0 since 20120924
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20120925 111407 DEVSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0000000014E30050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFE6D00050, size: 268435456)
M SHM_PAGING_AREA          (addr: 0000000015270050, size: 134217728)
M SHM_ROLL_ADM               (addr: 000000001D280050, size: 2678942)
M SHM_PAGING_ADM          (addr: 000000001D510050, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 000000001D5A0050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000000FFD0050
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Tue Sep 25 11:14:08 2012
B dbtbxbuf: Buffer TABL (addr: 0000000022E40160, size: 30000000, end: 0000000024ADC4E0)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14206976
B ***LOG BB0=> buffer TABL       started with length 30000000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: 0000000024AE0160, size: 10240000, end: 00000000254A4160)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5032704
B ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13502 * 256 = 3456512
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer EIBUF (addr: 00000000254B0170, size: 4194304, end: 00000000258B0170)
B ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13502 * 256 = 3456512
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer ESM   (addr: 00000000258C0170, size: 4194304, end: 0000000025CC0170)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 3001 * 48 = 144048
B 4: 1500 * 256 = 384000
B 5: 3001 * 8 = 24008
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 4916 * 512 = 2516992
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer CUA   (addr: 0000000025CD0170, size: 3072000, end: 0000000025FBE170)
B ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13501 * 256 = 3456256
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer OTR   (addr: 0000000025FC0170, size: 4194304, end: 00000000263C0170)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B   max_blocking_factor = 15, max_in_blocking_factor      =   5,
B   min_blocking_factor = 10, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1160, total = 3064
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 000000000AAF0050
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 000000000AAF07C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 000000000AAF0800
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 000000000AAF080C
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=D:\usr\sap\PIS\DVEBMGS40\sec, AS=devsys, instanceid=40)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec (client:    , key: 102635, len: 14851)
N SsfPseLoadFile: Couldn't open file D:\usr\sap\PIS\DVEBMGS40\sec: Permission denied
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPELEARN200.pse (client:    , key: 172011, len: 1348)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSNCS.pse (client:    , key: 025318, len: 804)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLA.pse (client:    , key: 025401, len: 2838)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLC.pse (client:    , key: 025427, len: 3080)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLS.pse (client:    , key: 025344, len: 1465)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 14851)
N SsfPseLoad: ended (6 of 7 sucessfully loaded, 8 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N        PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
N SncInit():   found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit():   found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit():   found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): found snc/gssapi_lib=path_to_SAPCRYPTOLIB
M *** ERROR => DlLoadLib: LoadLibrary(path_to_SAPCRYPTOLIB) Error 126 [dlnt.c       237]
M          Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("path_to_SAPCRYPTOLIB")=DLENOACCESS
N   [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) path_to_SAPCRYPTOLIB not loaded
N   [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N           sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c    230]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c    232]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c   10019]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c   327]
Regards
Babu

Problem solve by taking out SNC profile

Similar Messages

6.40 Ramp-Up: Dispatcher problem

Hi,
we have installed the WAS 6.40 unicode version (ABAP + Java) and Adobe Document Services as part of the Ramp Up.
The installation was done successfully without any problems and Support Packages (ABAP, BASIS) have been applied up to level 3, in addition the ABAP kernel has been upgraded to patch level 19.
We have the following issues:
1. In the Microsoft Management Console the disp+work
(dispatcher) process is in yellow status: "Running but dialog queue info unavailable" even though we can logon to the system through the GUI and do not see any error messages in the system.
2. When we try to test print any Adobe Form through transaction code "SFP", we get the following error message:
"Test for function group /1BCDWB/SM00000001 Function module /1BCDWB/SM00000001
Runtime: 7,670,791 Microseconds
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message: Adobe document services error: SOAP Runtime Exception CSoapExceptionTransport : (1001)
3. The trace file in the ICM Monitor ("SMICM") shows the following error messages:
[Thr 4636] *** INFO => the EXTBIND attribute in parameter
icm_server_port_<xx> for service 8000 is not necessary on Windows - i
[Thr 4636] Tue Jul 27 17:58:19 2004
[Thr 4636] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 11 seconds [icxxtool.c 431]
[Thr 4636] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
[Thr 3940] Tue Jul 27 17:58:28 2004
[Thr 3940] IcmJ2EEScheduleFunc: WARNING: no HTTP service defined
[Thr 4896] Tue Jul 27 18:02:02 2004
[Thr 4896] *** ERROR => IcmCreateCacheInvalMsg: no HTTP/HTTPS service active [icxxmsg.c 2903]
[Thr 4896] *** ERROR => IcmCreateCacheInvalMsg: no HTTP/HTTPS service active [icxxmsg.c 2903]
[Thr 4896] *** ERROR => IcmCreateCacheInvalMsg: no HTTP/HTTPS service active [icxxmsg.c 2903]
We also posted this as a Ramp-Up OSS message but maybe someone on this forum came across this as well before...
Thanks,
Guenther
Message was edited by: Guenther Schober
Message was edited by: Guenther Schober

To resolve step 3, remove the EXTBIND=1 parameter from the instance profile. EXTBIND is only needed when using ports < 1024.

Urgent, creating xml files dynamically, request dispatcher problem

hi all,
Problem 1:
There is a problem we are facing, while request dispatching.
The files CBECBC.XML & CBECBC_Envelop.XML,
both xml files. These files are created on request from the user, dynamically, and displayed on the browser,
by including them in a jsp page.
Here we face a problem when they are to be included into the jsp page.
The error is the following :
//////// Error ////////
Could not find request dispatcher for the url CBECBC.xml
Could not find request dispatcher for the url CBECBC_Envelop.xml
The created files are stored in the "d:\pstudio35\desks\bank\BankWeb\".
We are using " <jsp:include page="...."/> " (dynamic jsp include tag), to include the xml files.
Problem 2:
And could you just let me know how to include a xml file in a jsp file,
so that the xml file is displayed in the exact format of xml(with the tags).
I am using Pramati Studio 3.5
Its urgent!!!
Regards,
Deepa Datar

problem 2:
either translate all < en > into < and > or display the XML in a textarea

Adobe AIR Event Dispatcher Problem

I have created an AIR application, I have removed an component and again i added the same component. That time the event dispatcher of the removed component is been called again and again.How to resolve this problem. Urgent Reply ASAP......

The only idea that comes to mind is to keep the file on the dvd, then have your app install (copy) it on first launch.
Thanks for adding the bug. For others affected by this, please visit the bug and add your vote. All feedback is appreciated!
https://bugbase.adobe.com/index.cfm?event=bug&id=2938315
Chris

That old 'disp+work.EXE dispatcher' problem - tried everything !

Hi,
I have been having the same problem as described recently in another thread (but didn't want to hijack it, hence this new one), where when I try to run the application server from the Netweaver 7.01 ABAP trial version there is an error: 'disp+work.EXE dispatcher not running'.
I have uninstalled and reinstalled a couple of times, and this seems to finish correctly (I delete the folders beforehand as explained elsewhere). I have edited my services file to make sure the port numbers are correct (and neat !). Basically the program seems to start up (green background) and after a minute or so goes yellow (after the error message has flagged up).
My system is an XP laptop, with plenty of memory/diskspace. I am a complete newcomer, so please be gentle with me.
Any ideas ? Or has everyone packed up already ?
Merry Christmas,
Nick

Uninstall minisap installation. Than change computer name lower than 13 chars. My suggestion a simpler name like "minisap" .In most cases Microsoft gives complex computer name like yunus-ax8323akdm . With minisap installation your computer name is host name like PROD QA.After change computer name restart setup and re-install. You will see everything is ok. Sometime you have to start manually database from SAP MMC (console)
[Special Discussion about topic|http://www.ykburda.com/2009/01/how-to-start-dispworkexe-dispatcher/]

Dispatcher problems

Hi,
I have problems with the initiating the dispatcher+work service. The dispatcher gets to the running state but cannot connect to the message server and after that stops the whole process. The developer trace shows the following error message:
ERROR => DpShMCreate: ShmCreate SHM_DP_CA_KEY(rc=4) [dpxxca.c     181]
ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c 431]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
What could be the problem?
Thanks.

Hi,
there are two possibilities
1. a system with the same system number is still running.
2. Another process is attached to the shared memory and it can't be
   deleted. Check whether the start service is still running and
   stopp it. Then try to restart the system
Please make sure
no disp+work with the same instance-number is running on this box
(it could also bee that there is an old instance of dpmon or MMC
is running).
Now if this is not the case then there can be a kernal problem.Just check the above things and let me know.
Award suitable points

Request dispatch problem

To all
The problem is that my request dispatching is not forwarding the request and I haven't got a clue why. I have a upload servlet which is working fine as it parses the request and the forwards you to the same jsp page or the next jsp page according to what values it extracts. However I have set up a bean to display the contentType() of each request which is sent to it from the jsp pages, however nothing is displayed when the request is forwarded from the upload servlet. this is what is happening .....
public class upload extends HttpServlet {
public void doPost( HttpServletRequest req, HttpServletResponse res ) throws ServletException, IOException {
HttpServletRequest request = _req;
HttpServletResponse response = _res;
parseMultiForm pMF = new parseMultiForm( _req );
Hashtable values = new Hashtable();
String param;
while ( ( param = pMF.getNextParameter()) != null) {
String value = pMF.getParameter();
values.put(param, value);
if (values.containsKey("submit")) {
String url = (String) values.get("reload");
RequestDispatcher dispatcher = getServletContext().getRequestDispatcher("/" + url);
dispatcher.forward(request, response);
if (values.containsKey("continue")) {
String url = (String) values.get("next");
RequestDispatcher dispatcher = getServletContext().getRequestDispatcher("/" + url);
dispatcher.forward(request, response);
The above servlet forwards the request to a jsp which does the following....
<jsp:useBean id="info" scope="session" class="InfoBean" />
<jsp:setProperty name="info" property="request" value="<%= request %>" />
However infoBean does not receive anything when the request is forwarded from the servlet??
Can anyone see anything obviously wrong?? is it to do with the JSP asking for the <%= request> and not receiving it because the request dispatcher has altered it in some way?
Thanks in advance anyone
Andy.

I have exactly the same problem. I can�t make the servlet pass the request object to the target jsp.
Try not changing the request nor the response. Unfortunatelly due to the kind of job i do inside my servlet there's no way i can't touch the request. So if you can make it work with mi advice please let me know.

Cairngorm events dispatch problem

Hi,
We are developing a Flex 3 AIR application on Cairngorm and
LCDS 2.6. The problem is some Cairngorm events don't get fired
which results in null reference errors. But when we put an Alert is
starts working. Can you suggest any solution and reason why its
happening.
Thanks,
Oleg

One thing that will cause events to appear not to fire is
when you forget to instantiate your controller somewhere on your
mxml file. The events will dispatch, but the command won't get
executed.
Another one - if you create custom events and override the
constructor, you have to to call super(MyController.EVENT_TYPE) or
else your event doesn't get bound to the command.

Dispatching problem in REM Planning Table

Hi,
I have encountered a problem in REM planning Table, from REM planning table when i m accessing Bar char planning table and try to dispatch the planned order it is not dispatching the order. I have checked the scenario is previously it was working fine but now it is not working with same settings can u guide me tht which settings affect the planning table dispatch. neither it was showing the capacity requirements, i have maintained the rate formulas is work centre and formula was working fine, i doubt it relate to SPRO settings kinldy give me hints where i can check n wht standard settings i have to make for planning table..

Plz give some suggestion on this....

Urgent web dispatcher problem

Hello, dear experts!
We try to set up a new web dispatcher for SAP WAS cluster (6.40 PatchLevel 87289.311) which is all done accoding to the help info.
However we can't use it as everytime I hit the Web Disp URL I am getting this error:
500 Dispatching Error
Dispatching Error
Error:     -26
Version:     6040
Component:     HTTP_ROUTE
Date/Time:     Fri Oct 28 12:46:55 2005
Module:     http_route.c
Line:     2351
Server:     nrxqa8__00
Detail:     no valid destination server available for '!ALL' rc=13
     © 2001-2003, SAP AG
The web dispatcher profile we created is :
1. Profile generated by sapwebdisp bootstrap
SAPSYSTEMNAME = QA8
1. unique instance number
SAPSYSTEM = 03
1. Accesssability of Message Servers
rdisp/mshost = nrxqa8.NRXTOR.WORLD
ms/http_port = 3602
1. SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
1. SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=55555
1. SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
1. Description of the Resource
icm/min_threads         = 20
icm/max_threads         = 40
icm/max_conn            = 500
1. Communication Buffer
mpi/total_size_MB       = 100
mpi/buffer_size         = 65536
I really appreciate if you could help us with it... Any suggestions are welcome!
Thanks a lot!

Hello Yuri,
have you setup the web dispatcher profile with the command:
sapwebdisp -bootstrap
? It would have tested the connection to the message server. I think the message server port is wrong. If your instance numer is 02 then the default HTTP message server port is 8102 and not 3602. 3602 is the port of the SAP own protocol.
Regards
Gregor

Event dispatching problem

I have a panel with a button. The panel have a MouseMotionListener registered, but when the mouse is over the button the MouseEvent stop to go to the panel and go to the button. How can i let the panel understand to "keep the event also for me" ?
This solution seems not optimal ....
//my button class
protected void processMouseMotionEvent(MouseEvent ev)
MouseEvent trick=new MouseEvent((Component)ev.getSource(),ev.getID(),ev.getWhen(),ev.getModifiers(),this.getX()+ev.getX(),this.getY()+ev.getY(),ev.getClickCount(),true,ev.getButton());
this.getParent().dispatchEvent(trick);
super.processMouseMotionEvent(ev);
Suggestions?
Thanks in advance.
-Marco Bagnaresi

I'm no expert but I would have thought that the best way to do this would be to have your panel listening for mouse events on the button aswell.

Event Dispatch Problem With Classes

I have a custom Timer class that pops up an inactivity alert
after 3 minutes. The user can then choose 'yes' if they are still
editing a record or 'no' if they are done. If they do not respond
within 2 minutes of the alert it assumes 'no'.
A 'yes' refreshes the timer and closes the alert.
A 'no' kicks them out of the edit state in the component that
the timer is called from.
The logic of the timer is working fine but it doesn't seem to
be sending the event to the component that called it so clicking
'no' (or remaining inactive) does nothing. I feel like I'm missing
something really simple or just misunderstanding the
eventDispatcher function. Advice please??
Code From LockTimer class:
public class LockTimer extends Sprite
private var threeMinuteTimer:Timer;
private var twoMinuteTimer:Timer;
public function LockTimer()
// creates a new threeMinute Timer
threeMinuteTimer = new Timer(1000, 180);
twoMinuteTimer = new Timer(1000, 120);
// designates listeners for the interval and completion
events
threeMinuteTimer.addEventListener(TimerEvent.TIMER, onTick);
threeMinuteTimer.addEventListener(TimerEvent.TIMER_COMPLETE,
onTimerComplete);
twoMinuteTimer.addEventListener(TimerEvent.TIMER, onTick);
twoMinuteTimer.addEventListener(TimerEvent.TIMER_COMPLETE,
onTimerCompleteB);
// starts the timer ticking
threeMinuteTimer.start();
public function refresh():void{
restart(threeMinuteTimer);
twoMinuteTimer.reset();
private function onTick(evt:TimerEvent):void{}
private function onTimerComplete(evt:TimerEvent):void{
//trace("first timer");
Alert.show('You have been inactive for several minutes. Are
you still editing this record?', 'Inactivity Alert',
Alert.YES|Alert.NO, null, alertListener,null, Alert.YES);
twoMinuteTimer.start();
private function onTimerCompleteB(evt:TimerEvent):void{
//trace('second timer');
//Alert.show('TIME UP', 'Inactivity Alert', Alert.OK);
dispatchEvent(new Event("timeUp",true));
private function restart(tim:Timer):void{
tim.reset();
tim.start();
private function alertListener(eventObj:CloseEvent):void{
// Check to see if the YES button was pressed.
if (eventObj.detail==Alert.YES) {
refresh();
}else{
//exit edit mode
//Alert.show('TIME UP', 'Inactivity Alert', Alert.OK);
dispatchEvent(new Event("timeUp",true));
Code From Component:
private var theTimer:LockTimer;
private function initializeHandler(event:Event):void{
addEventListener("timeUp",timeUpHandler);
private function timeUpHandler(event:Event):void{
Alert.show('TIME UP', 'Inactivity Alert', Alert.OK);
//editDone();
}

so here is what i had to do to make this work:
1. I had to attach the listener to theTimer rather than the
component
2. I had to initiate the LockTimer constructor outside of the
function
3. I had to call the handler initialization function from the
component MXML
below is the revised code (with excess cut out)
<?xml version="1.0" encoding="utf-8"?>
<mx:HDividedBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="780" height="515" liveDragging="true"
creationComplete="initializeHandler()">
<mx:Script>
<![CDATA[
import mx.controls.Text;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
import classes.LockTimer;
public static const millisecondsPerMinute:int = 1000 * 60;
public static const millisecondsPerHour:int = 1000 * 60 *
60;
public static const millisecondsPerDay:int = 1000 * 60 * 60
* 24;
//IMPORTANT!!!////////////////
private var theTimer:LockTimer=new LockTimer();
private function initializeHandler():void{
theTimer.addEventListener("timeUp",timeUpHandler);
private function timeUpHandler(event:Event):void{
editDone();
private function refreshLock(theLock:int):void{
var theTime:Date=new Date();
if(theLock==1){
theTimer.refresh();
theTime.setTime(theTime.getTime() +
(millisecondsPerMinute*5));
}else if(theLock==0){
theTime.setTime(theTime.getTime());
}else{
return;
form1.request.firmlockedTime=String(theTime.valueOf());
form1.request.firmisLocked=String(theLock);
private function editIt():void{
//see if it's being edited
if(checkLock()){
//if its being edited send a message
Alert.show('This record is currently being edited by another
user. Please try again later.', 'Record Locked',
mx.controls.Alert.OK);
}else{
theTimer.startMe();
refreshLock(1);
form1.send();
currentState="AdminEdit";
private function editDone():void{
refreshLock(0);
form1.send();
currentState="Admin";
]]>
</mx:Script>
</mx:HDividedBox>

Dynamic Dispatch

Hello，everybody，
I am new to LVOOP,now I try to utilize LVOOP to current project, but it seems that I encouter a strange dynamic dispatch problem, I draft two demo vi called System_CAN_Demo1.vi and Node_CAN_Demo1.vi respectively, they should have the same implement behivour. I add a break point on the block program located " ..\CAN\Network management\Wake up line\Execute.vi", and it should be dynamic dispatched as the execute method has been overriden. but It appears System__CAN_Demo1.vi normal while Node_CAN_Demo,vi abnomal.
please check out the attachment code for details.
Attachments:
Dynamic Dispatch ---Debug.zip ‏375 KB

Your subclasses have two copies of the st variable, one in the superclass and one in the subclass itself.
By accessing it directly through a superclass reference, the "wrong" one is used.
In other words, don't do that. Your superclass already has the st variable, so there's no reason to declare it in the subclasses.
Also you should make the variables private and use getters/setters to access them.

Low disk space while background job?

Hi All,
I am facing problem with background job which is making low disk space. daily few background jobs are running in 2 or 3 application servers with one user. At OS level file srdrr4 size increasing in Directory usr\sap\<SID>\DVEBMGS00\work.
I restarted dispatcher problem is clreared. But the background job running on another application server.
What could be the reason behind this.
Thanks in advance.
Regards
Ganesh

Hi
Check the trace file of those wp at the os level(more dev_xx) in order to see if this job is filling the log file for example with an error.
Maybe this is the problem....
Z report with problems???? no I don´t think so !!! ahahahahha
Hope this help !!!!

J2EE Stack - Not working

We are not able to connect to the J2EE side of XI from browser. Also we are not able to connect to Visual Administration using J2EE_ADMIN. I checked if the user is locked on the ABAP side and it looks ok.
When we try to login to VA using J2EE_ADMIN I get an error saying Logon returned empty list of parameters.
Any help appreciated.

Michael
Can you go through the below urls for some of the dispatcher problems:
/thread/129900 [original link is broken]
SAP R/3 Installation : Dispatcher not starting up.
WAS 640 ABAP dispatcher and workprocess donu00B4t start
http://help.sap.com/saphelp_nw04/helpdata/en/86/43b14041ecf10fe10000000a1550b0/content.htm
Go through this url for management of dispatcher:
http://help.sap.com/saphelp_nw04/helpdata/en/f5/51c7d170bc4a98b1b5a0339213af57/content.htm
---Satish

Dispatche problem

Similar Messages

Maybe you are looking for