DISPLAY:=1 starts 800x600 with xgl [SOLVED]

Hey,
I've got a strange problem, I'm trying to use XGL with SLIM. The xgl part of it runs fine, all the effects and stuff work, all I'm doing is calling
exec startxgl 1 ati gnome
in my xinitrc for SLIM.
The problem is that it always starts in an 800x600 window in the top corner of the screen. If I call it on DISPLAY:=0 like so
exec startxgl 0 ati gnome
It starts at the proper resolution, but none of the effects work.... So I'd like to somehow get it to run on DISPLAY:=1 in the proper resolution... I think its just a config problem and not XGL...but I have been unable to find anything about setting resolutions for specific DISPLAYS:=X. Some how 0 is set properly. My xorg.conf is pretty simple...
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dri"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "RV350 AR [Radeon 9600]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Thanks!

check /usr/bin/startxgl, and add -fullscreen to
Xgl :$xgldisplay -ac -accel xv:pbuffer -accel glx:pbuffer &
so it became
Xgl :$xgldisplay -ac -fullscreen -accel xv:pbuffer -accel glx:pbuffer &

Similar Messages

Problem starting OpenOffice with KDE [Solved]

I just did a clean Arch install witk KDE desktop. After I installed OpenOffice with
pacman -Sy openoffice-base
when I try to start openoffice I get the following error message
"The application cannot be started. An internal error occurred."
I tried to reinstall OpenOffice but that didn't help.
Any ideas whats going wrong? OpenOffice worked fine with Gnome before I did a clean install.
-A-

this problem is caused as some files on the install or somewhere else got assigned root permissions so that is the problem. i deleted the folder and everything recreated ok.
I have the same problem, but deleting ~/.openoffice.org2 haven't solved the problem, so I looked up this forum for other solutions and nothing helped.
From other topic: That's not a java problem, I think.
Any ideas?

How to start working with BPEL[SOLVED]-but someone still can help me :)

Hello Everyone,
I'm Fizzz, I'm totally new to BPEL. I don't know where to start and how to start.
Right now I'm Working with JDeveloper 11g R1. I didn't go further yet but Now i have to create some BPEL Process that can be integrated to my Web Application. There are some transaction to be Approved or Canceled from BPEL and if Transaction is Approved then i need to Update that Transaction to Peoplesoft's Database. I have 1 week to learn it. and then i need to start my work.
But i really don't know where to start? What do i need? And how to proceed?
Can Anybody suggest me the steps that i can follow to get Start with BPEL and done with Peoplesoft connectivity?
I would really appreciate your help.
Thanks,
Fizzz...
Edited by: Fizzz on Nov 24, 2009 5:14 PM

Thanks user11082822 and Vivek..
Your Oracle Doc links are really very helpful. i would definitely go through these docs to get familiar with BPEL, But i have only one week to understand this part of technology.
So would request for any Live Example or How to's for Sample BPEL app creation and integration part of that. I would definitely read these document but i need some fast overview on these processes practically.
Can you please suggest me such things.
Thank you very much to both of you for your very quick and very helpful effort. :)
Fizzz...

Openbox, start Programm with key[solved]

Hi @ all
I have a Problem with Openbox , I will start gmrun after pressing the F10 Key.
I have write in the rc.xml this keybinding,
<keybind>
<action>
</keybind>
but when I press F10, nothing go on..
edit:
wtf.....
I can not write the action line, evry time after submit only <action> is there....
ok it looks like action name="gmrun"

First, I agree with mucknert: that is not gmrun, it is a search field every gtk listview (or whatever it is called nowadays) provides by default.
Try the following to see if Openbox spits out any warnings:
Open a terminal emulator, execute `openbox --replace' in it and have a look at Openbox's output. It would also help if you could upload your rc.xml somewhere. There are also thousands of nopaste sites available where you could post your rc.xml if you don't have any webspace.

KDM with XGL used to start KDE issues

Hi,
I don't know if this problem was ever mentioned but if XGL/KDE is started from KDM using XGL http://wiki.archlinux.org/index.php/Xgl … M_uses_XGL there is no possibility to run OpenGL apps even with DISPLAY=:0 added. All attempts end with
Using GLX_SGIX_pbuffer
Xlib: extension "XFree86-DRI" missing on display ":0.0".
Error: couldn't get fbconfig
while if I follow second method, New KDM entry starts KDE with XGL, I'm able to run all apps.
Since I don't like issues which come with second option and I would like to run software like Google Earth I'm looking for answer if someone have solution how to fix this problem.
Thanks.

Hi,
I don't know if this problem was ever mentioned but if XGL/KDE is started from KDM using XGL http://wiki.archlinux.org/index.php/Xgl … M_uses_XGL there is no possibility to run OpenGL apps even with DISPLAY=:0 added. All attempts end with
Using GLX_SGIX_pbuffer
Xlib: extension "XFree86-DRI" missing on display ":0.0".
Error: couldn't get fbconfig
while if I follow second method, New KDM entry starts KDE with XGL, I'm able to run all apps.
Since I don't like issues which come with second option and I would like to run software like Google Earth I'm looking for answer if someone have solution how to fix this problem.
Thanks.

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: how to fix this?

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane

My MacBook Pro won't start - it just displays a grey screen with flashing icon of a folder with a question mark in the middle. Help.

It started while I was using Adobe InDesign, and that program froze, then crashed. When I tried to reopen the program, the error message I received was simply "Error: 16".
I tried to take a screen shot of the error message for reference, and it gave me a message saying I couldn't because I didn't have access to the files where it would normally store the shot.
Attached to my computer at the time was my Seagate Free Agent Go-Flex for Mac backup drive.
So, I closed any open applications, and restarted my computer. But it wouldn't restart. It only displays a grey screen with a flashing icon in the middle of a folder with a question mark on it.
I have no idea what happened - I wasn't using the machine any differently than usual, and it only had a few basic applicaitons open in addition to InDesign (like Preview, Text Edit, Microsoft Word, iCal).
I have MacKeeper on my MacBook, and I keep it clean.
Does anyone out there know what this flashing icon indicates, and if there is anything I can try on my own to fix it?
Thanks.

ali har wrote:
It started while I was using Adobe InDesign, and that program froze, then crashed. When I tried to reopen the program, the error message I received was simply "Error: 16".
I tried to take a screen shot of the error message for reference, and it gave me a message saying I couldn't because I didn't have access to the files where it would normally store the shot.
For the Error: 16
http://kb2.adobe.com/cps/827/cpsid_82744.html
Seems a uninstall and reinstall of CS is in order.
Attached to my computer at the time was my Seagate Free Agent Go-Flex for Mac backup drive.
May or may not be a contributing factor, may have kicked in at a wrong time or running root code.
So, I closed any open applications, and restarted my computer. But it wouldn't restart. It only displays a grey screen with a flashing icon in the middle of a folder with a question mark on it.
Computer can't find a bootable volume.
https://support.apple.com/kb/TS2570
I have MacKeeper on my MacBook, and I keep it clean.
Well that explains it, MacKeeper is almost malware.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Search the forums here for "MacKeeper" they will tell the whole story, crapware.
Disconnect all drives, follow the "Grey Screen" instructions and hold Shift key down while booting, if you get into OS X , immediatly backup your files to another drive and disconnect.
In my opinion you should first check to make sure you have a backup of your data, then just erase the entire internal drive (hold c boot off the 10.6 disk, use Disk Utility), reinstall OS X, same user name, update to 10.6.8, c boot off the 10.6 and Repair Disk (to fix a update error) install your programs and finally return files from backup into the same main user folders like before (Music, Docs, Pictures etc.)
A pain it is, but you've hosed your system and in the process you might as well rebuild everything and have a fast machine again. So happens to clear MacKrapper, uninstall CS5 and any other junk in your system at the same time. Fresh, clean, lean and mean.
Learn to Carbon Copy Cloner to a external drive that new pristine boot drive, you can hold the option key and boot from it (even update it), which is a real bacon saver when something like this happens. Also it's free to use, donations accepted.
http://www.bombich.com/
Note: if anything above I've mentioned is too complicated or your not sure, seek the services of a local computer specialist.

[SOLVED] How to start JACK with KDE 4? (and which JACK should I use?)

Hi again
I'm using KDE 4, and I've just installed JACK again, and since I can't find any decent documentation on this, I'm having a bit of a problem.
Currently I have jack from [extra] installed, rather than jack2. When I try starting jack as the ArchWiki suggests, i.e. by typing "jackd -d alsa", I get the following error:
$ jackd -d alsa
jackd 0.120.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
the playback device "hw:0" is already in use. Please stop the application using it and run JACK again
cannot load driver module alsa
I've also tried jack2 from [community], and after starting it with "jack_control start", I get this...
$ jack_control start
--- start
DBus exception: org.jackaudio.Error.Generic: Failed to start server
So how do I start it? I'm guessing jack doesn't want to start because some other KDE application grabbed alsa before jackd (but I've been wrong before), and I don't have the slightest idea what jack2 is about with that "generic" error. If anyone would help me shed some light on this, I'd appreciate it a lot.
Thanks in advance!
Last edited by Wintershade (2011-03-26 19:22:08)

@schivmeister thanks that one worked
Yes, it was knotify4. So now this part works. I've switched to jack2 and it works flawlessly when starting it with jackd
So this part is solved... now, would you be so kind (if you know) as to point me to some tutorials or howtos (or proper documentation, cos I can't find much of that either) on how to connect various ALSA channels with JACK?
Basically, I want to route my PCM channel and the Mic channel into Capture 1 (or one to Capture 1 and other to Capture 2), since my Intel HDA audio card doesn't have the "Mix" or "What-U-Hear" or whatever as an available capture source. Any leads on that? (or do I have to open another thread for it?)
TIA

Openbox won't start with consolekit [SOLVED]

I would like to start openbox with this line of code in my ~/.xinitrc to enable me to use devmon for automounting removable media:
exec ck-launch-session dbus-launch openbox-session
However, upon logging in without login manager with ~/.bash_profile code:
#Start x at boot
if [[ -z $DISPLAY && $(tty) = /dev/tty1 ]]; then
exec startx
fi
I am unable to start openbox.
Openbox starts fine with this line in my ~/.xinitrc:
exec openbox-session
Last edited by mynameisneo (2012-03-04 10:15:51)

https://wiki.archlinux.org/index.php/Start_X_at_Boot
Here's my .bash_profile:
if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then
startx
fi

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

My display starts up with a black screen or fades to black after being on.

So just recently when I would turn my mac on, it starts up with just a black screen. The computer is on just no display. Sometimes it will take multiple times of restarting the computer to get the display to come on. When the display is finally on and working fine I found out that if I touch the top of the iMac near the iSight the screen will then slowly fade to black. And of course, the only fix is to restart. Anyone have a similar problem? Unfortunately I didn't purchase the extended warranty and my computer is one month past the 1 year mark. Thank you.

Restart the computer with the Option, Command, P, and R keys held down, and release them when you hear the second startup chime; this clears a setting which causes it to start up into verbose mode each time.
(35613)

How to start dhclient with systemd at startup? [SOLVED]

I have eth0 connected to DHCP server and want to use dhclient instead of dhcpcd. How can I start dhclient with systemd? Is there something similar to
systemctl enable dhcpcd@eth0
Last edited by mpelikan (2012-12-18 13:43:28)

dhcpcd comes in package with completed systemd unit (/usr/lib/systemd/system/dhcpcd.service and /usr/lib/systemd/system/[email protected]) by package developer, but dhclient doesn't.
mpelikan, you should write your own systemd unit for dhclient for yourself using
1) dhcpcd units as example
2) wiki page https://wiki.archlinux.org/index.php/Sy … vice_files
3) man page for dhclient to get the right options
Also I'm sure I saw somewhere an example of dhclient unit but I can't find it now. Anyway, it was not working out-of-box in Arch.
I've done this previously but then I've realized disadvantages of dhclient (so I've removed it).
Firstly, I didn't like how it's working in daemon-mode after some testing.
Secondly, it depends on deprecated net-tools.
You should try dhcpcd. If it doesn't work, you can make it work by editing configuration files / kernel options (like switching off IPv6 if you think you have an issues with it) or adding some parameters.

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Build 711 client issues with XGL?

Are there any known issues with installing the latest build of the 1.2
beta client (711) on the released version of SLED if XGL is enabled?
After installing the client and restarting, I got a message that my
display couldn't initialize (or something like that, it's the standard
error when X doesn't start) and it asked if I want to look at the X server
log. I said no, did the --disable-xgl, and now X came up ok. I then
reenabled XGL using the desktop effects, and 3D is working again even
after a restart.
Just wondering if the install of the client temporarily breaks XGL & X
necessitating disabling and reenabling XGL.
Joe

On Thu, 20 Jul 2006 16:28:17 +0000, linuxjoe wrote:
> Not that I know of. I have it running on my laptop with xgl and the 711
> client and it is running just fine. Typically when I see the error that you
> are running into, it is because I have done an init 3 and init 5 from the
> CNTL ALT F2 tty and still have the display running on CNTL ALT F7.
I hadn't changed my runlevel at all. Simply installed the Novell Client
and rebooted. I could see I was in runlevel 5, but with no GUI since X
couldn't start. Ran the XGL disable thing, typed startx, and now the GUI
came up. Within there use desktop effects to reenable 3D effects (all
still in runlevel 5 and having never switched to any alternate terminal
screen), log off, and now it was working. Might have just been an
isolated incident.
Joe

Starting out with cRIO

Hello,
What's the most inexpensive way to start programming for FPGA cRIO based applications? I'm interested in learning to develop for an FPGA and cRIO but can't afford the cRIO, is there an inexpensive way to simulate for these (I think even the realtime drivers may be expensive)
I found this RIO eval kit, but I'm not sure if it's what I need to start learning cRIO/FPGA LabVIEW development?
http://sine.ni.com/nips/cds/view/p/lang/en/nid/205722
much thanks!
Solved!
Go to Solution.

Yes - I agree with GerdW that the myRIO is a great way to get started with cRIO & RT/FPGA programming. It's very easy to set up and use.
I recently used one for a personal project - making a giant version of Tetris! (https://decibel.ni.com/content/docs/DOC-35435)
I can also recommend the eval kit - it comes with a single board RIO an addon board that contains lots of useful things for starting out with RT/FPGA programming (an LCD display, analogue input/outputs that are linked, some push-buttons etc.). I currently have one on my desk at work as we've been doing some stuff recently with LCD displays. They also have onboard CAN (e.g. automotive) so if you're interested in doing anything with that then I don't think you can do that with the myRIO.
If you can't get the myRIO cheaply enough (because you're not a student - but it's worth talking to NI anyway) then the eval kit is a bit more representative of what it's like to use a cRIO and you can get further with it without needing any additional hardware.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

DISPLAY:=1 starts 800x600 with xgl [SOLVED]

Similar Messages

Maybe you are looking for