Display a confirmation message in a region,not in a page

HI Team,
Requirement :- Imc page named IMCCReateAddress.xml.
Subregion inside a page names HZcreateupdate.xml
At any action on button resided in HZcreateUpdate.xml ,developer want to display confirmation or error message in the same region of page Hzcretaupdate.xml,not at page level IMCCreateAddress.xml.
How can developer can achieve same?

Hi Christian.
You can use the same logic for your own processing logic.
the syntax is...
javascript:confirmDelete(htmldb_delete_message,'YOUR_PROCESS_NAME');Replace 'YOUR_PROCESS_NAME' with the name of your page process that handles the bulk delete. Don't for get the single-quotes either side of your process name.
Hope this helps.
Simon

Similar Messages

How to display a confirmation message before deletion

Hi,
I have an application and I want to display a confirmation message before people delete a record.
The button on page 42 is number 90 "Supprimer cette fiche". It is a Submit as "DELETE_ALL". I have seen that the delete buttons are redirections to the url javascript:confirmDelete(htmldb_delete_message,'DELETE');, but I cannot use this as my button is not a redirection, but a submit.
http://apex.oracle.com/pls/otn/f?p=4550
Workaspace : ESPACE2008
User : guest
password : acdc2009
Name of application is Activites
Thank you for your kind answers.
Christian

Hi Christian.
You can use the same logic for your own processing logic.
the syntax is...
javascript:confirmDelete(htmldb_delete_message,'YOUR_PROCESS_NAME');Replace 'YOUR_PROCESS_NAME' with the name of your page process that handles the bulk delete. Don't for get the single-quotes either side of your process name.
Hope this helps.
Simon

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday. I shut my iPad down and still no luck.

Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

I can not connect to the internet while using my ipad I get a message saying Safari could not open the page because the server stopped responding need help thank you

I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

TS3297 hi i was perfectly ordering from i tune all of a sudden i cant do that any more message coming up can not open the page please sort this out for me

hi i had a perfect account with itune all of a sudden stoped and constantly a message coming up can not open the page and since then i tred to change my password still cant buy any song please sort this out
thank you
rico jafarian

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

How to display a static Image in a region (Not From Database)

Hi
How can I display a company logo in a region? Not from any database.
If we can display a static company logo in a region then where Do I have to place this Company Image (Which Directory or is there any location I have to place this company logo).
Regards
Kiran Akkiraju

Scott
Thanks for reply.
I have gone through the link and as per the link
navigate to the Application Builder for your application.
click on the Shared Components icon
click the Images icon
click Create to upload a new image
click Browse... to locate an image on your local filesystem
make sure you remember the name of the image, for example: my_logo.gif
When I click on Application Builder I am not able to see shared Components.
I am able to see a Shared Components in a page definiton only.
Could you please let me know where Can I find this Shared components option.
Regards
Kiran Akkiraju

How to display a confirmation message to the second stage approver.

Hi,
I am working on an application which involves 2 stages of serial approvals. After the first stage approval, the request is forwarded to the second stage. When the second stage approver approves the request, the workflow proceeds with the user creation. I would like to let the second stage approver know about the status of user creation after he clicks the approve button. It can be just a simple message saying that the user creation has been successful or unsuccessful.
My question is how is it possible to show this confirmation message to the second stage approver after the user creation process?
I tried to use manual action. But it is not working(probably because the owner of the workflow is different from the second stage approver). Is there any other way to implement this?
thanks,
manoj.

It is really simple to implement, you have to just write another manual action to second supervisor after user creation and pass the result to manual action.
Hoping you are tried to create simple user with out assigning so many resources otherwise it will take time to load.
Please let me know if you face any issue to implement.

My ipod classic 80G is displaying the error message "this accessory is not supported" when placed on my Altec Lansing dock

Ipod is 80G Classic and displaying no other unusal or faulty behaviour. In the couple of days between the dock working fine and the error message appearing, there were no software updates. The ipod is actually a couple of years older than the dock- what's going on?

So the iPod worked previously on this particular dock? Does Altec's support website state that it supports your particular model iPod Classic?
Have you tried a hard reset of the device with it still connected to the dock? To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
It wouldn't hurt to also check the dock connector on the iPod for any signs of debrisa and bent or corroded pins that could be blocking the connection between the dock and iPod.
B-rock

My firefox crashes withou displaying a crash message, freezes and does not respond majority of the time. what is wrong and what do i do?

When i start Firefox it either
1) crashes, no crash message displayed. just closes as if nothing happened.
2) freezes, doesn't respond to anything and i have to "kill" it with task manager because if it froze and i try to click elsewhere like to show desktop or on another task it freezes the entire computer. It freezes in 3 ways:
1) is when i just opened it and it freezes immediately
2) when i click on it, or start typing some address into the bar
3) when i press enter after I've typed the URL in the address bar.
my Firefox doesn't have any add-ons, or anything else. i already re-installed it 2 times, cleared cache, history, reset all settings. still crashes

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

TS4268 My Apple ID and password are correct but my iPad displays a error message stating activation could not be completed. It's been like this for 2 days now. I just got this ipad. Help?

Does anyone else have this problem?? Please help. I've done everything I know how and the "support" forums here from the website itself have been absolutely no help

Try this link...
http://support.apple.com/kb/ts3424

User confirmation message display

Hi,
When the user selects a menu item, I want to display a confirmation message and after the user confirms, I want to proceed forward else I want to close the application.
Is it possible to display a message to user asking for his confirmation.
Thanks in advance.
Venu.

I could able to achieve it by the display text itself. I am reading the response of the display text message and then according to the key press by the user I am proceeding. I am checking whether user has clicked USER_ABORT or BACKWARD_MOVE or TIME_OUT. Can you tell me whether this is supported by all the handsets??

How to display the Output messages on LabVIEW

Hi,
I'm building a simple user interface on LabVIEW and I have the following question:
- TestStand has an Output Tab where I display some messages using Engine.OutputMessage; How can I do the same thing on my UI?
I've attached a printscreen of my TestStand sequence as an example of what I want do do on LabVIEW.
I apreciate all the help.
Thanks in advance.
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Attachments:
TS PrintScreen.JPG ‏137 KB

Sorry, from your post in the LabVIEW board I did not understand that it was the Output message that you were looking for.
I thought you wanted the results from your test steps displayed on the user interface.
It is the “Output Panel” in the sequence editor that displays your output message, but I do not know if there is default Output panel activeX indicator for user interface that the TestStand engine would update automatically like it does the execution view.
Maybe someone else knows
As also pointed out, the UI messages is your other option.
The Output Message event number is 40
http://zone.ni.com/devzone/cda/epd/p/id/3879
UIMsg_OutputMessages–(Value: 40) TestStand sends this message at periodic intervals when it holds references to output messages that calls to the OutputMessage.Post method queue. TestStand transfers the queued messages to an OutputMessages collection attached to the UIMessage.ActiveXData property for this event. An application that processes output messages should copy the output message references from the collection in UIMessage.ActiveXData to its own private OutputMessages collection by passing its private collection to the OutputMessages.CopyMessagesToCollection method. An application calls the Engine.NewOutputMessages method to create a private OutputMessage collection. TestStand generates this event only if the Engine.OutputMessagesEnabled property is True. Because there can be more than one handler for this event, the application should not modify the OutputMessages collection the UIMessage.ActiveXData property holds.
Omar
Message Edited by OmarGator on 10-09-2008 10:12 AM

How to display the content of a region on a different page

Hello,
Does anyone knows how to display the content of a region on an other page. I try to make page that displays content that resides somewhere else in my portal, so I can give a summarization of some hot topics. I really want to display the whole content of some regions (not a display with custom search).
Thanks a lot,
Hans

Set that page as portlet, include it in a region in another page and in the edit defaults decide which regions you want to display.
Mere.

Transfer Purchase Order - Error message "Field selection ZTR not defined"

Hi all,
I've customized a new transfer purchase order type : TRA.
When I go to ME21N and choose TRA type, SAP displays this error message :
"Field selection ZTR not defined
Message no. ME028
The field selection required by the system is not defined in table 162.
Further processing is currently not possible."
How can I fix that please ?
Regards,
Bahia.

Hello,
Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
Regards
Mahesh Naik

Display a confirmation message in a region,not in a page

Similar Messages

Maybe you are looking for