Display a particular column only when certain criteria is satisfied

Hi Experts,
I have a requirement from a user with which i am struggling. The person wants to see an entire report but see a particular column only when certain criteria is satisfied. I am not talking about filtering the entire Query but just a certain column.
Ex.
Data in Cube
Req | Candidate | Candidate Status | Grade
1 | C01 | Draft | A
1 | C02 | Withdrawn | B
2 | C03 | Hired | B
3 | C04 | In Process | A
3 | C05 | Hired | C
Result in Query
Req | Candidate | Grade
1 | <Blank> | A
1 | <blank> | B
2 | C03 | B
3 | <blank> | A
3 | C05 | C
Basically, user wants to see candidate information only when Status is Hired. Rest of the time, it should be blank.
Is this possible ?

Hi,
From My view this is not possible in Query.
You can do this in Backend or
You can create 2 Query
1.Query whith candidate name who is hired.
2.Query without candidate name whose status is not hired.
3.Merge these these report using Excel Macro.
Thanks and Regads,
MuraliManohar

Similar Messages

  • Display Column only when Current Year Selected

    Hi Gurus,
    1)I have a Req where in I need to Display a Column only when 2012 is selected,It shouldn't appear when i select 2010 & 2011 in the Prompt.
    2)I have to display a column only when the Last month of the Quarter is selected.
    Any help???

    Hi,
    Make it two reports, one with the column and the other report without the column. Place both the reports in two different dashboard sections and use conditional show/hide section as explained here,
    http://total-bi.com/2011/01/obiee-hide-show-sections/
    Regards,
    Dpka

  • The screen no longer displays a playlist column and when I hit the plus sign the screen no longer has a right side column to let me make a new playlist. Now what?

    The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?

    iOS: Unable to update or restore

  • Display the particular column in the page Based on some condition.

    Hi,
    I am using J developer 11g Release 2, I have one page contains form which give the details of a user,in that form i have column called Password,that password column needs to display only when i go for adding a new user,while editing the details of the user the column needs to be disappear.
    Can you help me on this?
    Thanks in advance,
    Suganya.
    Edited by: Suganya on Feb 24, 2012 4:02 AM

    You mean you only want to see the password field if you add a new user, and after the user is stored you won't display the field again?
    Do you use the same page (or fragment) to add or edit the user? Or do you use different pages (or fragments) for this purpose?
    Anyway if you can somehow distinguish between add and edit you can use the visible property of the field (or column) and set it to true or false via an EL.
    Timo

  • Why is my ping so high in the first column only when i do a tracert?

    When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
    tracert www.yahoo.com
    Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
    over a maximum of 30 hops:
      1     9 ms     3 ms     3 ms 
      2  1101 ms    34 ms    38 ms  193.sub-66-174-20.myvzw.com [66.174.20.193]
      3   169 ms    55 ms    52 ms  49.sub-69-83-13.myvzw.com [69.83.13.49]
      4    52 ms    56 ms    54 ms  194.sub-69-83-13.myvzw.com [69.83.13.194]
      5   179 ms    58 ms    57 ms  101.sub-66-174-17.myvzw.com [66.174.17.101]
      6   168 ms    57 ms    60 ms  TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
      7   181 ms    58 ms    57 ms  0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
      8   170 ms    59 ms    58 ms  0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
      9   177 ms    67 ms    59 ms  ae11.edge2.NewYork.Level3.net [4.68.62.41]
    10     *        *        *     Request timed out.
    11     *        *        *     Request timed out.
    12     *        *        *     Request timed out.
    13   192 ms    49 ms    60 ms  ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
    14   185 ms    51 ms    60 ms  YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
    15   380 ms    73 ms   129 ms  ae-5.pat2.bfz.yahoo.com [216.115.96.67]
    16   339 ms    69 ms   146 ms  ae-4.msr2.bf1.yahoo.com [216.115.100.73]
    17   215 ms   152 ms    80 ms  xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
    18   289 ms   217 ms   217 ms  et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
    19   187 ms    87 ms    79 ms  po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
    20   474 ms   314 ms   294 ms  ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
    Trace complete.

    hi there
    see you never got an answer from vzw
    take it you still have the high ping or no ping  in my cases
    your doing better then i
    seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages  and lots of buffering in video playback
    i have had 3 tickets in the past 3 month to try and get this fixed  but they say cant find anything wrong
    and noone else is having the problem here are a few things that seems to have helped me out
    1  increase your TTL  time till live 
    this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
    2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days  this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
    http://www.dslreports.com/drtcp
    is a tool that will help you change your computer setting and reg
    use drtcp and the results from this page
    http://www.dslreports.com/tweaks
    xp win 7 win 8 this will help.  vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
    remember your original settings write them down so you can go back to them should you have problems
    also make a restore point and backup your reg before tinkering with windows os
    send a private message to me if you need more help  or get a computer savvy friend to help you out if you need
    3  if your signal noise is under 4G  -100bd the lower the better,  there is a way to set your android to lte only  mode.
    more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
    dail *#*#4636#*#* this is a back door to your android software and is open source code by android os  not vzw
    and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
    you can make more problems  be very sure what you change  and do one thing at a time so you remember and can  dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
    good luck
    ron
    ps im not a vzw rep in any way other then a fellow customer not getting answers.

  • Hide/Show columns only when exporting to .CSV

    Hi, how can i hide a particular column when exporting the report to excel

    Hi,
    You can set column conditionally by request.
    E.g. columns that you do not like export set condition PL/SQL function body returning a boolean
    RETURN NVL(:REQUEST,'EMPTY') NOT IN('CSV','XLS','PDF','XML','RTF');I have sample here
    http://apex.oracle.com/pls/otn/f?p=40323:63
    EMPNO column is not exported from report
    Br,Jari

  • How do I add cells, but only if certain criteria are met first in other cells?

    I have a little problem in working this out, I can't! I can add cells & alike, but more complex working are an unknown to me.
    Any help here would be greatly appreciated.
    I've three cells in a row C4 with 5 in, D4 with 3 in & E4 with 1 in. I'd like to add these numbers together into a cell below E6, which is =SUM(C4:E4) which will make 9 in cell E6.
    I've also three cells in a row below C4 - E4 which are C5, D5 & E5 which will only ever have ether 0 or 1 inputted into them. All these cells will only ever have data inputted into them from left to right i.e. Column C first, then Column D & lastly Column E.
    What I’d like for the cells to do, is only add cells C4 - E4 from left to right, once a cell below (C5 - E5) has had a 1 inputted into it & then continue to add the cells there after normally.
    Examples:
    Like above if C4 had 5, D4 had 3 & E4 had 1, & the all the cells below (C5 - E5) had 1 in them, then E6 = 9.
    Again,  if C4 had 5, D4 had 3 & E4 had 1, but C5 had 0, D5 had 1 & E5 had 1, then E6 = 4.
    Again if cells C4 - E4 are the same, but C5 had 0, D5 had 1 & E5 had 0, then E6 still = 4.
    In the same aspect as above, if C4 - E4 are the same, but C5 had 1, D5 & E5 had 0, then E6 = 9.
    If cells C4 - E4 are the same, but C5 - E5 all had 0, then E6 = 0.
    I hope this is clear, & all comments are welcome.
    Many Thanks.

    Big_Botts wrote:
    Hi Barry,
    Just a thought, Wayne is helping me on another question I asked, do you think you could help?
    https://discussions.apple.com/message/17950789#17950789
    Wayne's got that one well in hand. Nothing to add there, except that you'll find the details about conditional formatting in the Numbers '09 User Guide, which can be downloaded via the Help menu in Numbers. While you're there, grab the iWork Formulas and Functions User Guide as well. Both are quite useful.
    Regards,
    Barry
    Regards,
    Barry

  • PO approval only when certain value in PO is changed from its referrence PR

    Hi All,
    Need your help on this one. I have a scenario, where it is mandatory to have an approved Purchase Requistion as a reference to create a PO. I have configured this part. Now, the requirement is, because this PO is getting created in reference to an approved PR, it doesn't require any approval. However, if the buyer changes any value in the PO, which is different from the PR, then it would trigger a Purchase Order approval.
    Please do let me know, if there is a standard way to map this scenarion in SAP ECC 6.0.
    Thanks and Regards,
    Anirban

    Hi Ravindran,
    Thanks a lot for your inputs. I have done the PO approval configuration, and the PO approval is working fine. My problem is that, when I am creating the PO with an approved PR, the PO approval is getting triggered. I do not want that. I want the PO approval to not get triggered, because, it is getting created with reference to an approved PR. However, if the buyer makes any changes in the PO, which changes the value of the PO as compared to the PR, then it should trigger the PO approval process.
    Any tips/comments on this particular scenario? Would be looking forward to your reply.
    Thanks and Regards,
    Anirban

  • Smart Albums don't display in Photos App, only when edit Contacts Photo

    I created a Smart Photo Album on my Macbook Pro and synced it to my iPhone4. When I open the Photos App, the smart album isn't listed but when I edit a Contact's photo by clicking on the Choose Photo button, the Smart Album is listed along with all the other albums.
    But when I just go to the Photos App on it's own, the Smart Album is still not there.
    Anyone have a similar problem?

    Welcome to the Apple Discussions. That sounds like an iPhoto or iPhone issue and not an iWeb one. Post your question in the Installing and using iPhoto '09 or iPhone forum.
    OT

  • Displaying calculated field only when data exist

    Hello,
    Is there a way to display my calculated value only when the data entry field is being used. For instance, if I have several fields vertically aligned, I don't want to display a bunch of zeros if their data fields are not being used.
    THANK YOU!!!!

    You can check for the rawValue in the Calculate event before any script.
    Event: Calculate
    //FormCalc
       if(Field1.rawValue ne null) then
         // write your script here
       endif
    //JavaScript
    if(this.rawValue != null){
       // write your script here
    Thanks
    Srini

  • TS2771 my text tone is not working on my ipod when certain people text

    The text tone works only when certain people text my son's iPod Touch. When I text him from my iPhone5, the badge shows up, but no alert.

    Follow basic troubleshooting found in your user Guide for your phone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414

  • How to show 'Show Answer in Feedback' only when learner pass  test?

    Is it possible to display Answer in Feedback only when learner pass the test?

    No, this is not possible.
    Regards Anders Northeved

  • Hotspot click for only some rows in ALV grid for a particular column ?

    Hi there,
            In ALV grid, we can make Hotspot enable for all rows in a specified column
    by specifying in the fieldcatalog with Hotspot attribute set as true.
    But I want to enable Hotspot only for certain rows in the particular column. I tried with MC_STYLE4_LINK , but I didnt got the required result.
    So , how could I achieve that in ALV grid.
    Points would be rewarded for helpful answers.
    Regards,
    Anil .

    Hi,
    You can do it for a column. Please refer to the code snippet below,
      DATA : it_fcat TYPE lvc_t_fcat,
             wa_fcat LIKE LINE OF it_fcat.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
      I_BUFFER_ACTIVE              =
         i_structure_name             = 'SMMW_ALERTS_ICON_S'
      I_CLIENT_NEVER_DISPLAY       = 'X'
      I_BYPASSING_BUFFER           =
      I_INTERNAL_TABNAME           =
        CHANGING
          ct_fieldcat                  = it_fcat
       EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
    LOOP AT it_fcat INTO wa_fcat.
      IF wa_fcat-fieldname = 'STATUS'.
        wa_fcat-hotspot = 'X'.
        MODIFY it_fcat FROM wa_fcat.
        CLEAR wa_fcat.
      ENDIF.
    ENDLOOP.
    CALL METHOD l_obj_alv_grid->set_table_for_first_display
          EXPORTING
        i_structure_name              = 'SMMW_ALERTS_ICON_S'
       CHANGING
            it_outtab                     = lt_alerts_st
            it_fieldcatalog               = it_fcat.
    In the above replace the structure 'SMMW_ALERTS_ICON_S' with your structure and column 'STATUS' with your desired column.
    Hope this helps,
    Regards,
    Vinodh

  • The column browser is no longer available when trying to view music in iTunes. I'm only able to use the column browser only when viewing playlists. Why?

    I noticed that after one of the recent updates to iTunes, I am unable to view my music using the column browser type view. Only when I select one of my playlists is the music displayed with the column browser. When I select Music to view the contents of my library, only the album covers are displayed on the right side. The old column browser type display is not available any more - it is grayed out. I do have "show list views for all media" checked in my Preferences / General tab.
    Did Apple screw up or is it me?

    You're welcome.
    tt2

  • Syntax to only allow certain values in column

    What is the syntax, when I create a table, to only allow certain values in a specific column ?
    create table x
    col1 char(1) <- for example, only want to allow Y or N
    ) tablespace myspace;

    That would be a check constraint. Please check the oracle syntax on constraints.
    create table x
    col1 char(1),
    CONSTRAINT check_col1
    CHECK ( col1 in ('Y','N') )
    ) tablespace myspace;

Maybe you are looking for

  • How do i set Shortcut key for activating some operation for JButton

    while using the JButton component,one question is arising in my mind that is (1)how to set Shortcut key instead of using JButton actionPerformed event. I need a shortcut key for the similar operation has to be performed

  • Slight yellow color in the top left of my i phone 5

    there is a slight yellow mark in the top left side of my i phone 5. I noticed just one week before only.

  • Acrobat XI Pro download message: Akamai - what to do next?

    I just bought Acrobat XI Pro for $400, but when I went to download, it says, "Akamai Download Manager 580.16 MB". So I downloaded this and it looks as though I never received Acrobat. Where do I find Acrobat?

  • How to make a slideshow of a book project?

    I am new to Aperture (1.5.2), so apologies if this question has been handled previously. I could not find a solution on my own or in the manual or in a quick search of the forum. I produced a book and ordered it from Aperture. Now I would like to vie

  • AppWorld so very slow

    OK. I've played with a lot of apps on the PlayBook and I do remove some that I don't use. But when I open AppWorld, it takes an AGE before I can do anything. I used a friend's PB today who only has a few apps and it is so much quicker. Is it really n