Display all the fields in one screen shot

Hi all,
I am having 20 fields in the grid.
but few fields are displaying in the grid and the scroll bar is existing to display other fields
where as i need all the fields in on screen shot.
let me know it .

Hi ,
One option would be to reduce the width of the fields in the catalog or manually after the data is displayed.
Regards:
Arun

Similar Messages

Appending All the fields of one internal table to other

Hi,
while running a FM I get three internal tables, my requirement is that I am running this FM at item level if it is possible to append all the tables datas get as a result of this FM to other internal table having same structure.
I know it is possible while using loop, I need a solution with out using the loop
Regards
Nausal

Move Itab1[] to itab2[].
data: begin of itab occurs 0,
Maktx LIKE MAKT-MAKTX,
end of itab.
data: begin of itab1 occurs 0,
Maktx LIKE MAKT-MAKTX,
end of itab1.
select maktx from makt into table itab where maktx like 'M1%'.
move itab[] to itab1[].
loop at itab1.
write:/ itab1-maktx.
endloop.

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

How can I display all the columns on the screen without scrolling from side to side?

My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size? If you can't do any of these, I think you're out of luck!

How do we know what are all the fields updated in a screen?

Hi all,
         If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b>
         I want to write log file for the updated fields for that particular sales order.
         <b> How do we know what are all the fields are updated ?</b>
         If we can use SBOTransaction_Notification procedure.How to write code inside that.
         Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
         Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

When I upload a cvs file not all the column display in the Data / Table Mapping screen

1. I have created application using Apex Data Loading wizard. There when I am trying to load data from .csv file, but not all the columns display in the "Data / Table Mapping" screen. But if I go through AQL --> Utility --> Data Workshop, there all column display in "Data / Table Mapping" page. I want to get same thing in application I created. How will get all columns display in the screen?
2. Is there any way to select target table dynamically during runtime. So that in appication we can select different target tables with different source file to load data.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

Error message disble the Fields in Selection Screen

Hi,
In my Report i am validating some fields as mandatory.
If the field is initial then one Error message should be display in the screen and user has to modify the selection screen.
But after displaying the errro message my selection screen is input disable except the mandatory field.
I want all the fields should be input enable.
Sample code for Error message,
MESSAGE E018 WITH 'Enter Plant'.
Please provide the code for this.

Performing checks on SELECTION-SCREEN
- if the check uses only one independent field (e.g.: value exist in a table) use a[ AT SELECTION-SCREEN ON <field>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_2@2@], the field will be editable when error is raised
- if the check uses some fields, group them using [SELECTION-SCREEN BEGIN OF BLOCK <block>/END OF BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPSELECTION-SCREEN_BLOCK.htm] and then [AT SELECTION-SCREEN ON BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_4@4@], each field of the block will be editable when error is raised
So, if you really want that each and every field be editable when an error is raised, declare every parameter and select-options in a big block, and perform the check in a unique AT SELECTION-SCREEN ON BLOCK xxx.
Use Error message, Warning and Information don't break the flow of the report.
Regards,
Raymond

Project system: CJE2 tcode.. Add the field to selction screen

Hi,
GM ALL
I would like to add the field to selection screen for a dynamic report one which is using in CJE2 T.CODE. I am trying to add the field through se36 [logical data base level] but its not helping.
Need to add below field to selection-screen
CJDB_SELIDS
Field: SELID_PR
Please let me know,if any one know the solution..
Regards
KK
Edited by: kirankumar2129 on Oct 18, 2011 10:03 AM

You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
Thanks,
Babu Kilari

How do i change the resolution of my screen shots that i captured from my desktop?

How do i change the resolution of my screen shots that i captured from my desktop?
Thanks.

Do you mean you want it saved with the resolution set to something other than 72 dpi when the capture is made, or do you mean you want your capture saved at a higher resolution than the captured area?
1) If the first, there are ways to change the default capture format .png to something else, such as .jpg, .tif and a few others, but as far as I know, the resolution will always be 72 dpi. You can use Preview to change the resolution of the captured image under Tools > Adjust Size. You will get this:
If your intention is to set the resolution for professional printing defaults, then change the resolution to 300. Turn off Resample image to prevent the image from actually having more pixels added. The resolution will simply be reset from 72 to 300 dpi without changing the actual number of pixels in the image. It will also print a lot smaller since the output device will now use 300 pixels per linear inch instead of 72.
Leave Resample image on if you need to maintain the dimensions. Be aware however that scaling the image (resampling) will add a lot more pixels to the image than are there to maintain size. Expect the image to get very soft and pixelated looking when adding 417% more data to the image than it currently has.
2) If you mean you want the OS to actually save the captured area as a high resolution image at size, that can't happen. A capture is a 1:1 grab of the display buffer. It can only capture what's there. So if you capture a 700 pixel x 500 pixel area, that's all the bigger it can be without scaling it afterwards.

How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.

Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com

Tecra A7-112 Display can't display all the colors corectly

Hi, I have the same problem with my display as the one in this post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14718&messageID=54000
It seems that my screen can't display all the colors corectly and there appear somekind of stains/artefacts in most of the colors.
Here is a photo, not so good but still, with my issue:
http://www.logicode.ro/test.jpg
http://www.logicode.ro/test1.jpg
You can see the first color - pure red it seems ok and solid but he second - a small varation of red it has artefacts / somekind of stains.
I learned that this is a dithering issue which may be resolved in BIOS.
For the Satellite A100-237 the problem was fixed by downgrading to a older version of bios, but what can I do with my Tecra A7-112 notebook? :|
Message was edited by: eStatic

So I sent an e-mail to TOSHIBA rearding my problem and thet told me exactly this:
"It's no BIOS problem. We think the display is defective. You can contact on of our Service partners to repair the device."
So I sent it to TOSHIBA and they said that they will replace my LCD. Today I got my laptop back but I don't know if they did replace the LCD and I still have the problem. The dealer from which I bought the laptop will replace it with a brand new one but I'm scared it will have the same problem.
Now I'm lost as people from this forum told this is a BIOS problem but TOSHIBA denied this...

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How can I get my iPod touch to display all the artwork on my computer?

Hi,
I have an iPod touch 4th gen 32 GB with iOS 6.1 on it. I have trouble getting it to display all the album artwork that I have on my computer. Not all of my music has it, but about 90% of it does. Is there any way I can make it display everything that's on my computer? I have iTunes 11 on it and it is a Windows 7 computer. Thanks!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Desktop is no longer displaying all the colors on it's monitor.

My desktop computer is no longer displaying all the colors on its montior. I've replaced the monitor with a known good one and the problem remains the same. The desktop is 6 months old and when I purchased it, the first one had to be replaced because of this exact same issue. This appears to be a common problem. Is anyone else experienced this is issue and has HP recalled any of these specific desktop's because of it?

Wjile there can be no consolation with your plight, you do have the replacement option under warrant. BTW, it does help if you state the exact model or product #. Saying a "series" is like called out that I had a Chevy.

Display all the fields in one screen shot

Similar Messages

Maybe you are looking for