Display bugs for wmode with value "opaque"

We are on an flex project, as the requirement we need build a context menu for right click of mouse, so we use "opaque" as the value of "wmode", but we found that the display of contains (Canvas, HBox) will overlap if there are a scrollbar (only in IE).
It looks like:
It should like this in normal (Captured in FF3):

Hi there,
And idea would be to either post some code so we can take a look at it or try to reproduce the problem in a smaller example and post it ( so we can take  a look at it ). I'm not sure if this has something to do with transparency or with component positioning. It is true that IE can be quite a pain the butt, still, I don't remember running into this problem before.
Some code or something would definitely help ( at least, try to somehow describe the structure of the project, did you change some additional settings or something? ).
With best regards,
Barna Biro

Similar Messages

  • Creating search help for AFNAM, and display the hit list with values only

    Hi guys,
    I have created a search help for AFNAM, but the hit list displays all even if it is blank.
    I want to display in the hit list the AFNAM with values and do not diplay the blank values...
    Is it possible? How am i going to do it?
    Thanks!
    Mark

    Hi Mark,
    After selecting data use this statement.
    DELETE it_table WHERE AFNAM is initial.
    Regards,
    Suneel G

  • Data loading with routine displays zero for key fig values

    Hi all,
    my source field is amount...........and target field is research amount...........
    if i restrict amount(source field) with cost element(coaeom7) and value type(010 then it is equal to target field research amount.
    for this my code is
    IF COMM_STRUCTURE-VTYPE = '010' AND
       COMM_STRUCTURE-COSTELMNT = 'COAEOM12'.
       RESULT = COMM_STRUCTURE-AMOUNT.
    ENDIF.
    but when i load the data it displays only zeros.........
    Pleas suggest
    Regards,
    Raj.

    Hi Raj,
    Do u need costelement values other than 'COAEOM12' into the target.
    Are you writing this routine in Start Routine/End Routine. if its BI.7
    If you are loading data from soucre cube/DSO to target structure, in the transformation you need to write start routine, before which you need to map amount field, cost element,and value type from source to Research amount in target,
    The you need to write the code
    If source_packake cost element = COAEOM12'  and source_packake value type =010
    then research amount = amount
    End If.
    i hope this will solve your problem.

  • Possible bug for emails with a large number of recipients

    When receiving emails which was also sent to a large number of people (more than can fit in two lines), it then displays the text 'and 10 more..." or however more there are. Clicking on this text is supposed to then display all the email addresses the email was sent to. However clicking on this is for some reason doing nothing. Is this a bug, or am I the only one having this problem?

    When receiving emails which was also sent to a large number of people (more than can fit in two lines), it then displays the text 'and 10 more..." or however more there are. Clicking on this text is supposed to then display all the email addresses the email was sent to. However clicking on this is for some reason doing nothing. Is this a bug, or am I the only one having this problem?

  • How do I display thumbnails for subfolders with images in Finder?

    Hello. I've settled in quite nicely with OS X but I find there's one thing I couldn't replace with a better alternative from XP and I've looked extensively for a solution but with no luck, so I figured I'd ask.
    It's best described with a picture (http://i38.tinypic.com/2j2i1rr.png). All those folders have images in them (at their root, not in subfolders). Instead of the generic folder icon, I'd like a thumbnail of the images in the folder (like this: http://imgsrv.worldstart.com/ct-images/folder-pic-blank1.jpg). The closest I've gotten to this is ticking "Show icon preview" in Finder's view options menu, but this only displays the thumbnails when I actually open the folder which is a bit of a problem when you have 200+ folders and you're looking for a specific one. The only thing remotely like this that I've found is FileBrowse (http://www.filebrowse.com/index.html) but it's too fat and slow to be of much use.
    Thanks for any help you might be able to provide.

    baltwo: Thanks for the tip, I didn't know how easy it was to set up custom icons in OS X. In this case it's a difficult solution because it will have to be done by hand for every single folder, which is a problem if I'm going to have these in two places. I'm new to Automator but there doesn't seem to be a way to have it; 1) Select all the folders in a directory. 2) Copy the first image in each folder to the clipboard and have it use that image as each folder's icon.
    Barney-15E: I know it sounds moronic, but yes. I've tried iPhoto but it's not a very good solution in this case. My folder structure is like this:
    Root -> 282 image folders with 10 to 60 pictures in each.
    All I really need is the ability to see at a glance what each image folder has without opening each individual folder. The folders are numbered sequentially (1-282 in this case) rather than by proper names, so this is the most efficient way.

  • Best MAC 10.6 Color Display Profile for use with Adobe Illustrator CS5

    Hi everyone,
    Which Color display profile should I choose for my iMAC (10.6) using Illustrator CS5?  I need the colors to appear as accurate as possible when exporting PDF files.
    Thank you!

    Diane,
    The only Monitor profile you should ever use is a device-specific one created for your particular monitor.
    If you have not calibrated and profiled your monitor, thereby creating a monitor profile in the process, used the canned one provided by the manufacturer of youor monitor.
    Wo Tai Lao Le
    我太老了

  • Exchange 2010 - Selecting display names for users with multiple mailboxes

     Hi all,
    This isn't so much of a problem, but more of a "What is the best way to handle this" sort of thing.
    I have a client with Exchange 2010 and multiple domains. Because they must be able to send as each domain, I have them setup with individual accounts/mailboxes for each domain. We're at a point that they have three domains which means three accounts per
    user and three listings in the GAL. Their original accounts shows up as Smith, John. The second domain added shows up as First last. I'm at a loss what to use for the third. They want each account to show up in the GAL so that other users can send account
    specific stuff to them if needed, but I'm trying to figure out how to keep this relatively organized and not make the name on outbound emails too convoluted.
    Any suggestions on a format I can use that will make these accounts stand out from each other in the GAL, but not be a hot mess on the recipient end either?

    Smith, John (Company A)
    Smith, John (Company B)
    Smith, John (Company C)
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Report for Asset with only values (No Zero values)

    Hi All
    There is requirement where in the user wants to genenerate report for assets with  values .There should not be Zero balance assets  included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
    regards
    Navin
    Edited by: Naveen Rao on Jan 22, 2009 10:04 AM

    Hi
    Can you  please specify the report name.
    regards
    Navin

  • Display a message in a For Loop  with field value

    Hello All,
    pls,i wanna display a message in a For Loop with field value the code is:
    FOR Q1 IN GET_SUM_EXP_QUANTITY LOOP               .
    INSERT INTO PLN_PLAN_DISTRIBUTION_WAY
    (FIN_YEAR_CODE , MONTH_CODE , MATERIAL_CODE , DISTRIBUTION_WAY , EXPECTED_QUANTITY , GROUP_CODE)
    VALUES (:PLN_PLAN.FIN_YEAR_CODE , TO_CHAR(V_FROM_DATE,'MM') , Q1.MATERIAL_CODE , 1 , V_MONTHLY_QTY , Q1.GROUP_CODE);
    MESSAGE(':PLN_PLAN.FIN_YEAR_CODE'||:PLN_PLAN.FIN_YEAR_CODE ||' '||'V_FROM_DATE = '||TO_CHAR(V_FROM_DATE,'MM'), 'Q1.MATERIAL_CODE'||' '|| Q1.MATERIAL_CODE||' '||'DISTRIBUTION_WAY'||' = 1'||'EXPECTED_QUANTITY'||' = '|| V_MONTHLY_QTY||'GROUP_CODE'|| ' '|| Q1.GROUP_CODE);
    FORMS_DDL('COMMIT');
    How 2 display a message with the value:
    Q1.MATERIAL_CODE
    Q1.GROUP_CODE
    message(Q1.MATERIAL_CODE)     
    gave me numeric or value error on run time when pressed on button
    Regards,
    Abdetu..

    Thanks 4 reply..
    again they r in a For Loop as mentioned above...
         INSERT INTO PLN_PLAN_DISTRIBUTION_WAY
                                                           (FIN_YEAR_CODE , MONTH_CODE , MATERIAL_CODE , DISTRIBUTION_WAY , EXPECTED_QUANTITY , GROUP_CODE)
                                            VALUES (:PLN_PLAN.FIN_YEAR_CODE , V_REPAIR_MONTH , Q1.MATERIAL_CODE , 1 , V_REPAIR_Qty , Q1.GROUP_CODE);
    FORMS_DDL('COMMIT');
    The fields in bold r required to be displayed for testing puposes..
    this gives me numeric or value error in runtime..
    Best regards,
    Abdetu..

  • Display Currency symbol with value in ALV Report

    Hi Experts,
    I need to display currency symbol with value in ALV Report like if currency type is dollar then $200.
    Here I am using field catalog type slis_t_fieldcat_alv and suing field merge catalog FM: 'REUSE_ALV_FIELDCATALOG_MERGE'
    I tried like this
        IF <fs_fieldcat>-fieldname = 'STPRS'.
          <fs_fieldcat>-seltext_s = 'Std Cost '.
          <fs_fieldcat>-seltext_m = 'Std Cost'.
          <fs_fieldcat>-seltext_l = 'Std Cost '
           <fs_fieldcat>-tabname = 'MBEW'.
          <fs_fieldcat>-ctabname = 'T001'.
          <fs_fieldcat>-cfieldname ='WAERS'.
          <fs_fieldcat>-datatype = 'CURR'.
        ENDIF.
    Please any one can suggest the solution for this.
    Advance Thanks.
    Regards,
    Bala Achari

    Hİ,
    Check this link.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=24379571
    Take care.
    Çağatay

  • I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't

    I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't continue in Hebrew.  I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste.  Does anyone know how to fix this?  I use an older MacBook running OS 10.9.1.  I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

    Just clarifying:
    Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
    Pages 5 has much better support but with bugs.
    If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
    If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
    As Tom recommends the only real solution on the Mac is Mellel.
    Peter
    btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
    Peter

  • Is this a bug? createdBy populated with value "1"

    I have a field in entity object mapped as historical column "createdBy". once I create a new record, this field populated as login user name. -- this works fine.
    However, after I specify this field "refresh after inserted/updated". this field populated with value "1" automatically once new record created. -- Is this a bug?
    BTW, the historical column "modifiedBy" does not have this problem.
    Thanks

    at javax.swing.JInternalFrame.setMaximum(JInternalFrame.java:890)
    at TestInterface.initComponents(TestInterface.java:48)What you posted there cannot be the entire contents of the method. According to the stack trace, your initComponents method, at line 48, calls the setMaximum method of some JInternalFrame object. However, the problem remains: Why a NullPointerException? It's possible there is a bug in the JVM, but that theory doesn't get your problem solved if it's true. And it's more likely (MUCH more likely for most of us) that it's a bug in your program. But what could that be? I looked at the API documentation for JInternalFrame.setMaximum and noticed this:
    "A maximized frame is resized to fully fit the JDesktopPane area associated with the JInternalFrame."
    I don't know how you would "associate" a JDesktopPane with a JInternalFrame, but possibly if you failed to do that, then references to the JDesktopPane would fail with a NullPointerException.

  • Best Practices for Exporting with Bug overlay

    I'm trying to optimize a bug graphic so as to speed up exports from FCP. I'm working at XDCam 1080i/60 (timeline + footage) and have experimented with different types of bugs, all PSD files. Here's what I've found exporting a 10 min. segment:
    No bug = 3 min. export
    96x96 pixel PSD of the bug positioned in the corner (semi-transparent)= 15 min. export
    1920x1080 PSD with the bug pre-positioned in corner (semi-transparent) = 15 min.
    1920x1080 PSD with the bug pre-positioned in corner (opaque) = 15 min.
    It seems such a simple overlay shouldn't demand so much reprocessing and take so long. Any ideas how to make this more efficient? I don't want to add a bug via Compressor as I want to retain control of what moments in the program the bug displays.

    Render to full before you export and all the times will match. The bug image size does not effect the render time as each frame has to be compressed separately. The only time it will make a difference is if you're scaling and positioning the bug to fit the screen, but if you position and size it correctly in Photoshop it will speed by the render time. XDCAM BTW is a dog to process because of its GOP structure.

  • Single query for displaying all but 1 column values for all tables

    Hi,
    All the tables have SYS_CREATION_DATE column.
    But I dont want to display this column value
    Can someone suggest some way in which i could achive this?
    Oracle version:11gR1
    OS:SunOS
    Cheers,
    Kunwar
    Edited by: user9131570 on Jul 6, 2010 7:57 PM

    user9131570 wrote:
    @Tubby
    I *want to display table-wise the values of all but 1(SYS_CREATION_DATE) columns in my database.*
    I need this in order to compare it to another database for all these values .Let me make a wild guess at what you are getting at.
    Given these two tables
    create table emp
       (empid number,
        empname varchar2(15),
        empaddr   varchar2(15),
        sys_creation_date date);
    create table dept
       (deptid number,
        deptmgr varchar2(10),
        sys_creation_date date);you want to somehow combine
    select empid,
             empname,
             empaddr
    from emp;with
    select deptid,
             deptmgr
    from dept;into a single sql statement?

  • Isolated Bug: No playback with Lut/Curves Display Color Profiles

    Hello Apple,
    I have isolated a bug a healthy dose of frustration, and I bet this is an opencl thing.
    Final cut does not work at all (crashes when you press play) if you use advanced display profiles such as the ones attached below.
    http://dl.getdropbox.com/u/3610987/CurveMatrix.icc
    http://dl.getdropbox.com/u/3610987/LutMatrix.icc
    I would say that this is a pretty high priority error, I am not going to be color grading with the default profiles, I presume it would be the same for most.

    I get the blue tint after my MBP wakes from screen saver, and I also have an external monitor attached. The blue tint only happens on the MBP screen, not the ext monitor. It only happens when I have the external monitor connected.
    This may be a bit early to declare a fix for this issue, because I don't think I have permanently, but here's what worked for me today. In the Display Preferences, I had created a new Display Profile for the external monitor. I switched it back to the default profile (in my case Dell 2007FP), and activated the screen saver. When I stopped the screen saver, no blue tint on the MBP screen. Switched back to my custom Display Profile and repeated the process. No blue tint. Hmmm... Now I can't get the blue tint to come back after numerous attempts, when before I could reproduce it at will.
    Give it a try and let us know if it works for you too.

Maybe you are looking for