Possible bug for emails with a large number of recipients

When receiving emails which was also sent to a large number of people (more than can fit in two lines), it then displays the text 'and 10 more..." or however more there are. Clicking on this text is supposed to then display all the email addresses the email was sent to. However clicking on this is for some reason doing nothing. Is this a bug, or am I the only one having this problem?

Similar Messages

Status and messaging for systems with a large number of classes

Very common dilemma we coders face when creating
systems involving a large number of classes:
Any standard framework to take care of the global status of the whole application and of gui subsystems
for both status handling and report messages to users?
Something light if possible...and not too much threads.

Ah, I see,
I found JPanel with CardLayout or a JTabbedPane very good for control of several GUI in an application - as alternative organization tool I use a JTree, which is used for both, selecting and organizing certain tasks or data in the application - tasks are normally done with data associated with them (that is, what an object is for), so basically a click onto a node in this JTree invokes an interface method of that object (the userObject), which is associated with this node.
Event handling should be done by the event-handling-thread only as far as possible - it is responsible for it so leave this job to it. This will give you control over the order in which the events are handled. Sometimes it needs a bit more work to obey this rule - for example communication coming from the outside (think of a chat channel for example) must be converted to an event source driven by a thread normally. As soon as it is an event source, you can leave it's event handling to the event handling thread again and problems with concurrent programming are minimized again.
It is the same with manipulating components or models of components - leave it to the event handling thread using a Runnable and SwingUtilities.invokeLater(Runnable). This way you can be sure that each manipulation is done after the other in the order you have transferred it to the event handling thread.
When you do this consequently most of your threads will idle most of the time - so give them a break using Thread.sleep(...) - not all platforms provide preemptive multitasking and this way it is garanteed, that the event handling thread will get a chance to run most of the time - which results in fast GUI update and fast event handling.
Another thing is, that you should use "divide and conquer" also within a single GUI panel - place components in subpanels and transfer the responsibility for the components in this panel to exactly these subpanels - think of a team manager which makes his employees work together. He reports up to his super manager and transfers global order from his boss into specific tasks by delegation to the components, he is managing. If you have this in mind, when you design classes, you will have less problem - each class is responsible for a certain task - define it clearly and define to whom it is reporting (its listeners) and what these listeners may be interested in.
When you design the communication structure within your hierarchy of classes (directors, managers, team managers and workers) have in mind, that the communication structure should not break the management hierarchy. A director gives global orders to a manager, which delegates several tasks to the team managers, which make their workers do what is needed. This structure makes a big company controlable by directors - the same principles can also keep control within an application.
greetings Marsian

Mail - how to send to large number of recipients?

How can I send an email to a large number of recipients that I hold addresses for in a document without a) adding them to my contacts, and b) so that they can't all see each others addresses?

I thought about using BCC, but it seems a little messy although it would do the job.
Messy how? That's exactly what it's for. In fact, there's no other way to hide addresses from other recipients of the message. The only other way to do it would be to script automated sending of one message per address, and that would get quite messy!
What is the maximum number of recipients that Mail can handle?
There's no limit enforced by Mail, AFAIK. The limits come from the SMTP server you're using.
One of the issues I had when using Outlook on Windows for this by copying and pasting from a text document, was that if there was an invalid/non-existent address in the list, it would just return an error and I was never quite sure if the whole thing didn't send, or if it was just to the dodgy address(es).
In Mail, you'll just get a bounce message for any addresses that don't exist. The one exception to that is addresses on the same server that you're sending from... often, the server will simply reject the attempt to send to an address that it knows doesn't exist. I'm not sure what kind of message the server returns in that case, though, and suspect it depends on the server. It's been a while since I've seen such a problem.

Signed up for Ps+LR. Have not received an email with my serial number yet.

Good afternoon . I signed the package from Adobe CC photography ( photoshop ) , have received the email confirming payment but have not received the email with the serial number . I can not use photoshop . what do I do ? Help !!!

There is no serial number. The software is activated via your Adobe ID.
Sign in to creative.adobe.com with your Adobe ID, download the Cloud desktop app then download the software.

Is it possible to send emails with attachments fro...

Hi there,
I was wondering whether it's possible to send emails with attachments from a Nokia 5230, it's just I would like to be able to send emails with attachments without using a computer especially when I'm out on my journeys.
Many thanks,
Tim Auluck
Solved!
Go to Solution.

Hi RocknRollTim,
Thanks for your reply. Have you already tried sending these files? Though you're not able to create all these files on the phone itself, you should be able to send them in an attachment when they're on your memory card.
Uploading a .jpg, .tiff, .gif, .doc, .docx .htm, .html .key, .numbers, .pages, .pdf, .ppt, .pptx, .txt, .rtf, .vcf, .xls or .xlsx file shouldn't be a problem when uploading. Just click on 'Other' when adding an attachment, then on 'Other files' and there you will be able to select any file that you have saved on your memory card.
Whether you can actually send the email depends on the strength of your internet connection (as I mentioned in my previous post). Also keep in mind that the phone itself as well as the network work with a maximum size file that you can send over 3G (more information about this can be found here), and can therfore also limit you in sending large files.
In any case, let me know how you get on so that we can assist further where necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outb

attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader

I made a series of interactive ebooks wiith Adobe Acrobat Pro. They worked fine in the old Adobe Reader. But now the commenting feature does not work properly either in Adobe Reader DC or Adobe Acrobat DC. When I open the comments, everything slows down or else I get blank pages. The tools are not usable. There seems to be some compatibility issue between what was done in these books with the commenting tools and the new applications. Has anybody experienced the same?

Hi Anubha,
Thanks for your reply. With the new Acrobat Reader DC, I have the same problem on two computers, one with Windows 7 and one with Windows 8.1. I downloaded a trial version of Adobe Acrobat DC on the computer with 8,1. Then I found out that I had the same problem with Acrobat DC as I did with Reader DC.
I made these e-books with Acrobat Adobe Pro 11. I never had a problem with Pro 11 or with previous Readers. Also I have sent these e-books out to other people who had Reader 11 and they had no problems. Now it seems that the books are not usable – at least in the fullest way -- for me or for anyone else using the latest version of Reader.
Any help would be appreciated. I have put a lot of work into these e-books.
De : Anubha Goel
Envoyé : April-21-15 12:47 AM
À : michael jaegermeister
Objet : You have been mentioned by Anubha Goel in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community
You have been mentioned
by Anubha Goel <https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community - View Anubha Goel's reference to you <https://forums.adobe.com/message/7456900?et=notification.mention#7456900>

I've lost my Ipod. Is it possible to find it with the serial number.

Hi,
I've lost my Ipod Touch and I'd like to know if it's possible to find it with the serial number.
Thanks for answer.
D

No. The SN will only help identify the iPod as yours if it is recovered.
- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
- Report to police and change the passwords fro all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product

Problem in compilation with very large number of method parameters

I have java file which I created using WSDL2Java. Since the actual WSDL has a complex type with a large number of elements(around 600) in it, Consequently the resulting java file(from WSDL2Java) has a method that takes 600 parameters of various types. When I try to compile it using javac at command prompt, it says "Too many parameters" and doesn't compile. The same is compiling successfully using JBuilder X . The only way I could compile successfully at command prompt is by reducing the number of parameters to around 250 but unfortunately that it's not a workable solution. Does Sun specify any upper bound on number of parameters that can be passed to a method?

... a method that takes 600 parameters ...Not compatible with the spec, see Method Descriptors.
When I try to compile it using javac at
command prompt, it says "Too many parameters" and
doesn't compile.As it should.
The same is compiling successfully using JBuilder X .If JBuilder produces a class file, that class file may very well be invalid.
The only way I could compile
successfully at command prompt is by reducing the
number of parameters to around 250Which is what the spec says.
but unfortunately that it's not a workable solution.Pass an array of objects - an array is just one object.
Does Sun specify
any upper bound on number of parameters that can be
passed to a method?Yes.

What to do when i have lost the email with the serial number on??

as it says above, i downloaded and biught CS5 from adobe last year, and have lost the email with the serial number on and i need to reload it onto a new machine. all emails from adobe were lost during a breakdown of my laptop.
could someone shed some light as to how i get this serial number back? i do not want to have to buy photoshop again! it costs enough as it is!

You will find your serial number in your account only if you have registered your copy with Adobe. If you haven't done that, the only way is to call customer support and see if they can help. (http://www.adobe.com/support/contact/)

Bug sending email with Excel file (immediate reply would he helpfull)

Hi ,
   Below is have pasted a sample code where it will sends a email along with an attachtment (xls) .where the email is working perfectly but the xls file attachtment has a blank space in the first line .
where iam facing the problem ,
ie there should not be any blank lines at the top .
Please run the code one i have pasted below .u can find the bug .
can any one help me on this .
please have ur mail id in ( reclist-receiver ) so that u can check for the output.
This table requires information about how the data in the
tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are
to be distributed to the documents and its attachments.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
This table must contain the summarized data dependent on each object type.
SAPscript objects store information here about forms and styles,
for example. Excel list viewer objects store the number of rows and columns
amongst other things and PC objects store their original file name.
DATA: objhead LIKE solisti1   OCCURS 1 WITH HEADER LINE.
*CREATION OF INTERNAL TABLE
DATA : BEGIN OF itobjbin OCCURS 10 ,
       vbeln type vbrp-vbeln,
       matnr type vbrp-matnr,
       werks type vbrp-werks,
       fktyp like vbrk-fktyp,
       END OF itobjbin .
This table must contain the summarized content of the objects identified as binary objects.
*DATA: OBJBIN LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA:   objbin TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
               WITH HEADER LINE.
DATA: wa_itobjbin LIKE itobjbin .
This table must contain the summarized content of the objects identified as ASCII objects.
DATA: objtxt LIKE solisti1   OCCURS 10 WITH HEADER LINE.
This table must contain the document recipients.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
This structure must contain the attributes of the document to be sent.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA : V_FKTYP LIKE VBRK-FKTYP.
Creating the document to be sent
doc_chng-obj_name = 'OFFER'.                      " input contains the attributes of the document to be sent
doc_chng-obj_descr = 'EMAIL WITH EXCEL DOWNLOAD'.   "input contains title/subject of the document
*BODY OF THE MAIL
OBJTXT = 'Hi'.
APPEND OBJTXT .
OBJTXT = 'Test for excel download'.
APPEND OBJTXT.
OBJTXT = 'Below is the attachment with Billing Document Details'.
APPEND OBJTXT.
OBJTXT = 'Regards'.
APPEND OBJTXT.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
Creating the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
select vbeln matnr werks
        from vbrp into table itobjbin
        up to 10 rows
        where werks GE '1000'.
loop at itobjbin.
select single fktyp into v_fktyp from vbrk where vbeln = itobjbin-vbeln.
move v_fktyp to itobjbin-fktyp.
modify itobjbin.
endloop.
PERFORM build_xls_data_table .
DESCRIBE TABLE objbin LINES tab_lines.
objhead = 'ABC.XLS'. APPEND objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 1.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'XLS'.
objpack-obj_name   = 'ATTACHMENT'.
objpack-obj_descr = 'XLS'.
objpack-doc_size   = tab_lines * 255.
APPEND objpack..
Entering names in the distribution list
reclist-receiver = ''.
reclist-rec_type = 'U'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
          document_data = doc_chng
          put_in_outbox = 'X'
          commit_work   = 'X'
     TABLES
          packing_list = objpack
          object_header = objhead
          contents_bin = objbin
          contents_txt = objtxt
          receivers     = reclist
     EXCEPTIONS
          too_many_receivers = 1
          document_not_sent = 2
          operation_no_authorization = 4
          OTHERS = 99.
CASE sy-subrc.
WHEN 0.
    WRITE: / 'Result of the send process:'.
    LOOP AT reclist.
      WRITE: / reclist-receiver(48), ':'.
      IF reclist-retrn_code = 0.
        WRITE 'sent successfully'.
      ELSE.
        WRITE 'not sent'.
      ENDIF.
    ENDLOOP.
WHEN 1.
    WRITE: / 'no authorization to send to the specified number of', 'recipients!'.
WHEN 2.
    WRITE: / 'document could not be sent to any of the recipients!'.
WHEN 4.
    WRITE: / 'no authorization to send !'.
WHEN OTHERS.
    WRITE: / 'error occurred during sending !'.
ENDCASE.
*&      Form build_xls_data_table
      text
--> p1        text
<-- p2        text
FORM build_xls_data_table .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
           con_tab TYPE x VALUE '09'.   "OK for non Unicode
CONCATENATE 'Billing Document' 'Material Number' 'Plant' 'Billing category' ' ' INTO objbin SEPARATED BY con_tab.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
LOOP AT itobjbin .
   CONCATENATE itobjbin-vbeln itobjbin-matnr itobjbin-werks itobjbin-fktyp' '
          INTO objbin SEPARATED BY con_tab.
   CONCATENATE con_cret objbin INTO objbin.
   APPEND objbin.
ENDLOOP.
thanks in advance,
vinay .

Hi ravi ,
     Thanks ,for your help .now xls is working fine .
but now iam facing a problem with the same function module .for txt files .where all the records are formated in asingle line .
can u provide a solution for this ,which would be very helpfull.
below is have attached the sample code .
Thanks,
vinay.
FUNCTION Z_KAILASH_ATTACHMENT1.
""Local Interface:
*" IMPORTING
*"     VALUE(EMAILID)
*"     VALUE(SUBJECT)
*"     VALUE(ATYPE)
*" TABLES
*"      ATTACH_FILE STRUCTURE SOLISTI1
*"      BODY OPTIONAL
This table requires information about how the data in the
tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are
to be distributed to the documents and its attachments.
DATA OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
This table must contain the summarized data dependent on each object type.
SAPscript objects store information here about forms and styles,
for example. Excel list viewer objects store the number of rows and columns
amongst other things and PC objects store their original file name.
DATA OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as binary objects.
DATA   OBJBIN TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as ASCII objects.
DATA OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
This table must contain the document recipients.
DATA RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE .
This structure must contain the attributes of the document to be sent.
DATA: DOC_CHING LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Create the internal table for body , subject
DATA: IT_BODY LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
CONSTANTS: con_cret TYPE C VALUE cl_abap_char_utilities=>horizontal_tab,
           con_tab TYPE C VALUE cl_abap_char_utilities=>cr_lf.
Move Body to Internal Table (body into it_body)
LOOP AT BODY .
    MOVE BODY TO IT_BODY .
    APPEND IT_BODY .
ENDLOOP.
DOC_CHING-OBJ_DESCR = SUBJECT.   "Subject of the Email
Move the Subject and Body to OBJTXT
OBJTXT[] = IT_BODY[].
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHING-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'RAW'.
APPEND OBJPACK.
Convert IT to Excel format
IF ATYPE = 'XLS' .
*CONSTANTS: con_cret TYPE C VALUE cl_abap_char_utilities=>horizontal_tab,
          con_tab TYPE C VALUE cl_abap_char_utilities=>cr_lf.
LOOP AT ATTACH_FILE .
    REPLACE ALL OCCURRENCES OF '#' IN ATTACH_FILE WITH con_cret. " INTO objbin.
    CONCATENATE ATTACH_FILE con_tab INTO objbin.
    APPEND objbin.
ENDLOOP.
ELSEIF ATYPE = 'TXT' .
LOOP AT ATTACH_FILE .
    REPLACE ALL OCCURRENCES OF '#' IN ATTACH_FILE WITH con_tab. " INTO objbin.
    CONCATENATE ATTACH_FILE ' ' INTO OBJBIN .
    APPEND OBJBIN .
ENDLOOP.
ENDIF.
****End-Code Excel Format .
DESCRIBE TABLE objbin LINES tab_lines.
objhead = subject. APPEND objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 1.
objpack-body_start = 1.
objpack-body_num   = TAB_LINES.
objpack-doc_type   = ATYPE.
objpack-obj_name   = 'ATTACHMENT'.
objpack-obj_descr = 'TEST'. "Attachment File Name
objpack-doc_size   = TAB_LINES * 255.
APPEND objpack..
reclist-receiver = EMAILID.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
   DOCUMENT_DATA                    = DOC_CHING
   PUT_IN_OUTBOX                    = 'X'
   COMMIT_WORK                      = 'X'
IMPORTING
SENT_TO_ALL                     =
NEW_OBJECT_ID                   =
TABLES
    PACKING_LIST                    = OBJPACK
   OBJECT_HEADER                    = OBJHEAD
   CONTENTS_BIN                     = OBJBIN
   CONTENTS_TXT                     = OBJTXT
   RECEIVERS                        = RECLIST
EXCEPTIONS
   TOO_MANY_RECEIVERS               = 1
   DOCUMENT_NOT_SENT                = 2
   OPERATION_NO_AUTHORIZATION       = 4
   OTHERS                           = 99 .
ENDFUNCTION.

Interactive notification BUG for email

I've found a bug with the Interactive Notifications for email messages on my phone:-
When the phone is locked and an email message comes up on screen, if I swipe to the left to reveal the options and select "Delete", the phone prompts me for my passcode (so far so good).
The problem is that it is almost impossible to enter my passcode as the keyboard "jumps" about on the screen as I do so. The only way I've been able to enter my password is to "double click" each letter, and eventually I can get my correct password entered, which then returns me to the lock screen, and the message is erased. I then subsequently have to enter my password again to unlock the phone (at which point the keyboard behaves normally!!!)
On testing this, I've found the problem only exists if you are using a more secure passcode, if you are simply using the 4 number pin option, the problem does not manifest itself.

I Have the same issue but have a simple passcode. But it is part of a security req for corporate email. Is this the connection?

L3 topology diagram with a large number of networks

I am working on redesigning a network that is using a single class B network for there LAN workstations and servers. I proposed for them to separate the two and put all of their servers into one class C network and the workstation in another class C. They stated that they wanted 14 separate networks for the workstations, different for section of the building, and 28 for the servers. The reason for the 28 is due to the fact they didn't keep track of how they used their address space and they do not want to renumber servers due to firewall rules. I have 50 networks hanging off of the collapsed core switch "WS-C6513-E" and finding room for all of these network is quite difficult. Does anyone have any experience with creating network topology diagrams with a large amount of networks hanging off of one device? I have attached a doc of what I have done.

Brandon
Sorry, you did say that in the last bit of your first post.
Last time i was doing topology diagrams i believe Visio had a pop up function where you could click over it but obviously if you are printing them out that does no good.
Unless you can summarise them to one entry with a note of how many subnets are being used within the summary i can't think of a way to do it. You could match the vlan number to the subnet (which you have partly done) and then just list the vlan numbers with the network prefix and make a note the subnet is derived from the vlan number.
Jon

JDev: af:table with a large number of rows

Hi
We are developing with JDeveloper 11.1.2.1. We have a VO that returns > 2.000.000 of rows and that we display in a af:table with access mode 'scrollable' (the default) and 'in Batches of' 101. The user can select one row and do CRUD operations in the VO with popups. The application works fine but I read that scroll very large number of rows is not a good idea because can cause OutOfMemory exception if the user uses the scroll bar many times. I have tried with access mode in 'Range Paging' but the application works in strange ways. Sometimes when I select a row to edit, if the selected row is the number 430 in the popup is show it the number 512 and when I want to insert a new row throws this exception:
oracle.jbo.InvalidOperException: JBO-25053: No se puede navegar con filas no enviadas en RangePaging RowSet.
     at oracle.jbo.server.QueryCollection.get(QueryCollection.java:2132)
     at oracle.jbo.server.QueryCollection.fetchRangeAt(QueryCollection.java:5430)
     at oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(ViewRowSetIteratorImpl.java:1329)
     at oracle.jbo.server.ViewRowSetIteratorImpl.setRangeStartWithRefresh(ViewRowSetIteratorImpl.java:2730)
     at oracle.jbo.server.ViewRowSetIteratorImpl.setRangeStart(ViewRowSetIteratorImpl.java:2715)
     at oracle.jbo.server.ViewRowSetImpl.setRangeStart(ViewRowSetImpl.java:3015)
     at oracle.jbo.server.ViewObjectImpl.setRangeStart(ViewObjectImpl.java:10678)
     at oracle.adf.model.binding.DCIteratorBinding.setRangeStart(DCIteratorBinding.java:3552)
     at oracle.adfinternal.view.faces.model.binding.RowDataManager._bringInToRange(RowDataManager.java:101)
     at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowIndex(RowDataManager.java:55)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.setRowIndex(FacesCtrlHierBinding.java:800)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<LoopDiagnostic> <dump> [8261] variableIterator variables passivated >>> TrackQueryPerformed def
<LifecycleImpl> <_handleException> ADF_FACES-60098:El ciclo de vida de Faces recibe excepciones no tratadas en la fase RENDER_RESPONSE 6
What is the best way to display this amount of data in a af:table and do CRUD operations?
Thanks
Edited by: 972255 on 05/12/2012 09:51

Hi,
honestly, the best way is to provide users with an option to filter the result set displayed in the table to reduce the result set size. No-one will query 2.00.000 rows using the table scrollbar.
So one hint for optimization would be a query form (e.g. af:query)
To answer your question "srollable" vs. "page range", see
http://docs.oracle.com/cd/E21043_01/web.1111/b31974/bcadvvo.htm#ADFFD1179
Pay attention to what is written in the context of +"The range paging access mode is typically used for paging through read-only row sets, and often is used with read-only view objects.".+
Frank

How to design Storage Spaces with a large number of drives

I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
replace it without SS tossing it's cookies.
In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself.
Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
to the parent OS. Did i miss anything?
Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool?

I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
replace it without SS tossing it's cookies.
In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself.
Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
to the parent OS. Did i miss anything?
Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool?
1) Try to avoid parity and esp. double parity RAIDs with a typical VM workload. It's dominated by small reads (OK) and small writes (not OK as whole parity stripe gets updated with any "ready-modify-write" sequence). As a result writes would be DOG slow.
Another nasty parity RAID characteristic is very long rebuild times... It's pretty easy to get second (third with double parity) drive failure during re-build process and that would render the whole RAID set useless. Solution would be to use RAID10. Much safer,
faster to work and rebuild compared to RAID5/6 but wastes half of raw capacity...
2) Creating "islands" of storage is an extremely effective way of stealing IOPS away from your config. Typical modern RAID set would run out of IOPS long before running out of capacity so unless you're planning to have a file dump of an ice cold data or
CCTV storage you'll absolutely need all IOPS from all spindles @ the same time. This again means One Big RAID10, OBR10.
Hope this helped a bit :) Good luck!
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Possible bug for emails with a large number of recipients

Similar Messages

Maybe you are looking for