Display column headers to display on detail section only

Post Author: Docmidnite
CA Forum: General Feedback
I am using Crystal 9.0.
I am creating reports with 3-5 group drill downs.
The user only wants the column headers to be seen when they display the detail section.
any ideas?

Post Author: krishna.moorthi
CA Forum: General Feedback
write suppress condition for headers Like
DrillDownGroupLevel<>drilldowngroupnumber(Ex : 3 or 4 or 5)

Similar Messages

12.1.3 BI Publisher report not displaying the detail section on first page

Hi,
As part of our R12.1.3 upgrade, I designed a Purchase Report as a RTF template.
Header and footer sections generate fine, but for some reason the detail (text body of the RTF template) does not display on the first page but starts on the second page (this is a PO with many lines). I am using MS Word table to display the detail section.
Is there something I can check?
Thanks,
Sinan

can you send me your template and xml . i can check at my side .
email:[email protected]
there may be some spaces in the beginning .

CRVS2010 beta - date field not display in details section

I use Visual stdio 2010 so i install crystal report 2010 for report.
It work fine .
but in report detail section there is date field then it will not be display.
alos if we do group on date field it will give error when we try to open report.
Plese geve me possible soluction for date field problem.
Edited by: hitesh_tatva1 on Jun 22, 2010 11:35 AM
Edited by: Don Williams on Jun 22, 2010 7:20 AM

Solution Found
Don't install sp2it sucksclassic case of the cure being worse than the disease.
Downloading and installing the SP3 redisist fixed the issue.
This link is probably appropriate:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Software Product->select Crystal Reports
Version->select Crystal Reports 2008
important part
Software Type->Utility Click Search Download the redist install.
Not very intuitive, but you'll need to do this so you download the runtime and not the full version.
Hope that saves you the 5 hours it took me to figure this darn thing out...I hate unintuitive products--they aren't very professional.
+
SAP, where do I send the bill for supporting your own product?
I too have the same problem. Hopefully we can get a solution to this soon as the delayed release of the 2010 runtime has us in a difficult place.
The problem: I upgraded my project to Visual Studio 2010; therefore, I upgraded to the Crystal Reports for Studio 2010 beta.
Everything worked fine until I modified the app.config so that I could deploy the application into our test environment. We do not have Visual Studio installed in this environment, so we needed to have a Crystal Reports Runtime. According to the SAP website deployment guide, currently the only way to deploy a 2010 app is to use the 2008 runtime by modifying the app.config file to redirect the bindings.
__Now, none of my date fields appear on the reports.__
Just to test, in my development environment, I commented out the redirects in the app.config and the dates appeared. I uncommented the redirects so that the 2008 runtime would be used and then my dates disappeared from the report.
Here is the entry I put into the app.config:
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Enterprise.Framework" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.1100.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Enterprise.InfoStore" publicKeyToken="692fbea5521e1304" />
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.1100.0"/>
      </dependentAssembly>
    </assemblyBinding>
</runtime>
Your help is much appreciated.
Thanks,
Michael
Edited by: SaganDraxan on Jul 16, 2010 8:23 PM

Repeated Header Row within a Details Section Only of a Group Ignores Tablix Member Properties

Ok. I have a situation where I have a details section of a group, and I am trying to get it to repeat the row headers on each page. It's not working. I've gone into Advanced Mode, and addressed the static Tablix Member for the left-most
field of the header row in question, set the properties for the Tablix Member to "RepeatOnNewPage: True" and "KeepWithGroup: After", and still, it refuses to repeat the row header for these details. I've tried rebuilding and
not deleting the column where the grouping was originally assigned (without deleting the grouping, of course), and assigned the properties for "RepeatOnNewPage" to that left-most, grouping field, yet I get the exact same results. I've looked
up solutions, and even spoken to the expert of experts, but no joy here. I'm using VS'10.

OK. So it is fixed... sort of...
Apparently, you must select to add group headers repeated as you create the group (inc. child group), BESIDES changing in Advanced Mode, Tablix Member /Properties / etc. Then you have to format that extra column within your Tablix to
make it appear to 'disappear'. BUT EVEN THEN, there is a new problem:
The headers will repeat on the additional pages, but only to a point. For some odd reason, SSRS doesn't consistently render the repeated headers of the group details for
every page, just where it is a hard (page) break, as opposed to a soft (page) break. My gut tells me that this has nothing to do with the .xml code, but is an SSRS idiosyncrasy.

Merging Page Headers Section and Details Section

Post Author: vikas777
CA Forum: .NET
Hello,
It is for an Invoice Report. I am having a list of values which are directly fetched from a table. There is a column named 'Type' which is having values 'Gas' and 'Water'. The table is having another column named 'values' which will list all values for the Type 'Gas' and 'Water'.Based on the 'Type' we will be displaying 'values' in the detail section. Gas values will be displayed in Details section A and water values will be displayed in Details Section B.
Q1: My requirement is to display like this
Page header for GasDetails section A
Page header for WaterDetails section B
Page header for ElectrictyDetails section c
Q2: I am using the same SProc for fetching values for Gas and Water. (At present I am having values only for type Gas. Just assume that there are five values for Gas. So the SProc returns a total of five datas and these values are displaying correctly. But I am getting five 0.00 values for the type Water.
Here is the sample of code in the formula section used code used:
If Isnull({RptInvoiceSub.Type}) <> True thenIF {RptInvoiceSub.Type} LIKE 'Water' THEN{RptInvoiceSub.value}
Product: Crystal Reports for .NET Framework 2.0
Version: 10.2.3600.0
Operating System(s): Win 2000 Professional
Database(s): SQL Server 2005
Please reply if any part seems to be unclear.
Thanks in advance for any help you can offer.

Post Author: Argan
CA Forum: .NET
This is a report design question so you may want to move it there to get answers.

Cross tab column headers display on all pages

I made a Crystal Report with a cross tab which displays all details. In the cross tab I have 6 columns with details about the data displayed in the last 2 columns. The headers of these columns are only displayed on the first page but not on other pages. How can I add column headers to all pages? Thank you.

Column headings should be repeated automatically, row headings can be repeated by
1.right-clicking on the row header
2. select Row options
3. .select Repeat Labels on Page break
or, when I just reviewed it in the help section it says:
"When you create a Cross-Tab that is wider or longer than the specified page size, the program automatically spans the printing across enough pages to accommodate the size of the Cross-Tab. In the Preview tab, a line will appear at each page break. For ease in reading, column headings will be repeated on subsequent pages. Row headings can also be repeated using the Keep Columns Together option.
To repeat row labels
Right-click the blank top-left area of the Cross-Tab and select Cross-Tab Expert from the shortcut menu.
The Cross-Tab Expert appears.
Click the Customize Style tab.
Select the Repeat Row Labels check box, if desired.
Crystal Reports lets you designate report objects that don't expand horizontally, such as text objects, field objects, OLE objects, charts, maps, lines, boxes, and so on, to be repeated on each additional horizontal page that a Cross-Tab creates. For more information, see Repeating report objects on horizontal pages."

Showing headers based on multi column details section

Hi,
I have a report which has a subreport listing a simple list of records from a table.
The list of records is displayed using the "Format with Multiple Columns" option in Section Expert (2 columns). The printing direction is set to "Down then Across".
How can I set up the report so that it suppresses the header for the 2nd column is there if no data there?
Thanks

Hi Santhosh,
I used formulas in a similar concept to what Abhilash mentioned above (*you will need to know how many rows fit on one page).
Create a formula to put in the details section (where your headers are) that keeps a track of the page, column and row number (which resets the variables accordingly)..
shared numbervar rowCount;
shared numbervar pageNum;
shared numbervar columnNum;
if pageNum <> pagenumber then (
// now a new page so reset everything..
    rowCount := 0;
    columnNum := 1;
    pageNum := pagenumber;
if rowCount = 30 then (
// new column so reset the row counter
    rowCount := 0;
    columnNum := columnNum + 1;
rowcount := rowcount + 1;
..now use the rowCount variable to suppress the details header if its > 1.

Changes to selected columns to display in Details tab in Task Manager are not saved during a reboot

I use Task Manager on Server 2008 R2 to monitor performance. I have added several columns to the Processes tab using View..Select Columns. I have added CPU time, I/O read/write/other bytes, etc.
The equivalent in Server 2012 is the Details tab. I figured out how to add these same columns - right click on the column headers, and choose "Select columns". This is not obvious by the way.
However these selections are not persistent across a reboot. So every time I reboot, I need to add the columns back to the display. That is not the case with Server 2008 R2 - they are persistent.
I am using a domain administrator userid, but not using roaming profiles.
This is a retrogression vs. Server 2008 R2. Can it be fixed?

Hi,
I meant that both the added columns of Windows Server 2008 R2 and Windows Serve r2012 RC are persistent.
You may install a new Windows Serve r2012 RC to check the symptom.
Currently, you may perform a System File Checker (SFC /Scannow) to check the result.
Regards,
Arthur Li
TechNet Community Support
Arthur, I have the exact same problem as David Trounce. The problem exists, as he described it, and I don't think you are understanding it. Please pass this problem/bug/defect report to someone else so that it can be logged and fixed before
RTM. Thanks! -Kent

Is it possible to have a Summary section display above every grouped Details section in a report?

I'm trying to create a report that displays a "Summary" section above every grouped Details section.
Is this possible in SSRS? If so, what is the best way to do it?
Thanks!

Hi mmw_pdx,
In order to achieve your requirement, we can use two tables to separately display summary data and detail data. Then use a list to combine the two tables based on the Name group. For more details, please see:
Drag a table to design surface, add a group grouped by Food.
Right-click the first column to insert a column with Inside Group-Right, then insert the corresponding values.
Drag another table to design surface, insert the corresponding values.
Drag a list to design surface with current dataset, then drag the two tables in the list.
Add a group grouped by Name in the list.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Need to display COlumn headers dynamically in ALG Grid

Hello,
I need to display column headers dynamically in alv grid Display with its corresponding value.
Column headers should be picked from a field in Final Internal table and its corresponding field will also need to pick from the same table.
T_final... Suppose Field STCTS - (To pick coulmn headers)
                                  CCNGN - (To pick appropriate value for that column)
Can anybody explain me how i can pass these values to ALV Grid using
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
    IT_FIELDCATALOG           = Y_I_FCAT
IMPORTING
    EP_TABLE                  = DY_TABLE.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Any suggestions will be appreciated....
Regards,
Kittu

Hi,
Go thru this link, and the code of Mr.Dev Parbutteea
Re: Probelm with Using Field Symbol in FM
thanks
Mahesh

JTable column headers not displaying using custom table model

Hi,
I'm attempting to use a custom table model (by extending AbstractTableModel) to display the contents of a data set in a JTable. The table is displaying the data itself correctly but there are no column headers appearing. I have overridden getColumnName of the table model to return the correct header and have tried playing with the ColumnModel for the table but have not been able to get the headers to display (at all).
Any ideas?
Cheers

Class PublicationTableModel:
public class PublicationTableModel extends AbstractTableModel
    PublicationManager pubManager;
    /** Creates a new instance of PublicationTableModel */
    public PublicationTableModel(PublicationManager pm)
        super();
        pubManager = pm;
    public int getColumnCount()
        return GUISettings.getDisplayedFieldCount();
    public int getRowCount()
        return pubManager.getPublicationCount();
    public Class getColumnClass(int columnIndex)
        Object o = getValueAt(0, columnIndex);
        if (o != null) return o.getClass();
        return (new String()).getClass();
    public String getColumnName(int columnIndex)
        System.out.println("asked for column name "+columnIndex+" --> "+GUISettings.getColumnName(columnIndex));
        return GUISettings.getColumnName(columnIndex);
    public Publication getPublicationAt(int rowIndex)
        return pubManager.getPublicationAt(rowIndex);
    public Object getValueAt(int rowIndex, int columnIndex)
        Publication pub = (Publication)pubManager.getPublicationAt(rowIndex);
        String columnName = getColumnName(columnIndex);
        if (columnName.equals("Address"))
            if (pub instanceof Address) return ((Address)pub).getAddress();
            else return null;
        else if (columnName.equals("Annotation"))
            if (pub instanceof Annotation) return ((Annotation)pub).getAnnotation();
            else return null;
        etc
       else if (columnName.equals("Title"))
            return pub.getTitle();
        else if (columnName.equals("Key"))
            return pub.getKey();
        return null;
    public boolean isCellEditable(int rowIndex, int colIndex)
        return false;
    public void setValueAt(Object vValue, int rowIndex, int colIndex)
    }Class GUISettings:
public class GUISettings {
    private static Vector fields = new Vector();
    private static Vector classes = new Vector();
    /** Creates a new instance of GUISettings */
    public GUISettings() {
    public static void setFields(Vector f)
        fields=f;
    public static int getDisplayedFieldCount()
        return fields.size();
    public static String getColumnName(int columnIndex)
        return (String)fields.elementAt(columnIndex);
    public static Vector getFields()
        return fields;
}GUISettings.setFields has been called before table is displayed.
Cheers,
garsher

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
        MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
        rcd = crReportDocument.ReportClientDocument
        rcd.PrintOutputController.PrintReport()
        MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

JTable -showing column headers and displaying multi-line strings

Hi,
This is two questions really.
#1 - Does anyone know why my column headers aren't showing in my jtable using the model below?
#2 - Does anyone know how I can display, mulitple line strings in a jtable? Currently my newline character ('\n') is just being displayed as a character.
any help very much appreciated,
Tom
private class TaskHistoryTableModel extends AbstractTableModel {
private List taskHistory = new ArrayList();
public Object getValueAt(int row, int col) {
if (col == 0) {
return ((TaskHistoryItem) taskHistory.get(row)).getText();
} else {
return ((TaskHistoryItem) taskHistory.get(row)).getDate().getTime();
public int getRowCount() {
return taskHistory == null ? 0 : taskHistory.size();
public int getColumnCount() {
return 2;
/** Getter for property taskHistory.
* @return Value of property taskHistory.
public List getTaskHistory() {
return taskHistory;
/** Setter for property taskHistory.
* @param taskHistory New value of property taskHistory.
public void setTaskHistory(List taskHistory) {
this.taskHistory = taskHistory;
public String getColumnName (int col) {
return col == 0 ? "Text" : "Entered At";
public boolean isCellEditable(int row, int col) {
return false;
}

fixed my own problem - make your mulit-line string into html format e.g.
this string will appear on two lines in a jtable
"<html><p>A much more interesting entry</p> <p>on multiple lines</p></html>"

Displaying dates as column headers for BEx Query

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the keyed in date in Bex Query Analyser. I'm able to display date as column heading for one column using text variable with replacement path.I could not able to increment date for other descriptions.Could you please help me to solve this issue.
Ex: Input Date 05/09/2007 then in the out put column headers should be 0509 0609 0709 ............ 1909
These are only column headers, values for the columns are quantities calculated using formulas.
It is urgent.
Thanks in advance.
Regards,
Mandadi.

hi mandadi,
if u want dates as headers only then u should use a text variable .
as a rule u can not set off set for text variable so u create restricted key figure with date restricted and set off set.
now u use this rkf to populate the text variable using replacement path.
text variable can use replacement path for replacing from any variable and characteristics.
bye

How to display help text in pop-up windo for column headers in

Hi all,
is it possible to display help text message in pop-up windo for manually created tabular form headers.
i am trying but not getting. any help will be appreciated.
Thanks in advance,
Amit

Amit,
I've responded to this in:
How to put help text for column headers of manually created tabular form.
Unless this is a different question?
Andy

Display column headers to display on detail section only

Similar Messages

Maybe you are looking for