Display column values as a series/legend on a line chart where one column value can be more than one category

Hi Everyone
I don't know if this is possible or not, so I will describe it. I have a column in a table called Filing. There are currently three values in it ("Abuse", "Neglect", "Voluntary") and each record has this populated. I also have
the below slicer for the column also.
I would like to add a fourth value called "Abuse/Neglect" that would identify instances where both an Abuse and Neglect petition was filed, which is a subset of the Abuse and Neglect records in the Filing column.
My question is, is it possible to create a line chart that has the 4 Filing possibilities: "Abuse", "Neglect", "Voluntary", "Abuse/Neglect" as the Series/Legend in the line chart?
The problem is that there are records that are more than one category: Abuse or Neglect records can also be Abuse/Neglect.
Paul

Hi Paul,
According to your description, there is a column with the values ("Abuse", "Neglect", "Voluntary") in your table, now what you need to is that add another value "Abuse/Neglect" in this column, and then use it
as Series/Legend in the line chart, right?
In this case, you can add calculated column to your table based on your logic. A calculated column is a column that you add to an existing PowerPivot table. Instead of pasting or importing values in the column, you create a DAX formula that defines
the column values. The calculated column can be used in a PivotTable, PivotChart, or Power View report as you would any other data column. Please refer to the link below to see the details.
https://msdn.microsoft.com/en-us/library/gg413492%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

  • How not to see values of a serie in a 2D line chart

    Hello,
    I have 3 series in a 2d line chart. There are two series which are the thresholds and one serie for the averages. Thresholds are fix/stable numbers which correspond to straight lines, however the averages as you can image dynamic and changing. What I want is to see the values of averages but not the values of the straight lines. I cannot find a spesific option for the series, I can always show/hide values which does not work for me.
    Thank you from now.

    Hi mertov,
    You can find anychart's documentation in their website. The document that shows and explains all the XML tags anychart uses is the XML reference.
    Best regards,
    Sergio

  • How do I set up the multiple scree display so I can use more than one doc at a time

    With the old operating system I was able to swipe to the upper left hand corner and 9 screens would appear.  When working on a research paper I was able to move docs to each screen to help organize.  With this Op System it seems to have gone away.  Is there a way to set it up again?
    Pat

    Apple implemented major changes with working in multiple spaces from the version you were using in 10.6 Snow Leopard. (This first version was in 10.7 and has developed further till now.)
    To avoid a very long description post, search 'Work in multiple spaces'  in the Help menu for details on how to use the new spaces in Mission Control.

  • Grouping on fields that have more than one value entered.  Please need help fast!!!

    Post Author: DennisC
    CA Forum: General
    I am creating a report that is to be grouped on a particular field that can have more than one entry.  My user said they did not care how I did it but to only count the record one time.  The field that is selected is a dropdown on an form that is in Alpha order.  So the entries always appear in the the field in alpha order.  This is for use as an example:  Record 1 has a value of CAT in the field,  Record 2 has a value of CAT, DOG in the field and Record 3 has a value of CAT, DOG, HORSE in the field.  I get 3 separate groupings for the 3 records.
    Group = CAT                      
          Then the detail information appears here
    Group = CAT, DOG
          Then the detail information appears here
    Group = CAT,DOG,HORSE
          Then the detail information appears here
    What is would like to see using this example is one group for CAT with all 3 records appearing under it and ignore the other two.  This way there would all be getting counted but the report would look a little more streamlined.
    Group = CAT
          record 1 detail information
          record 2 detail information
          record 3 detail information
    thanks in advanced for any help!!!!

    Post Author: shawks
    CA Forum: General
    I am trying resolve the same/similar issue in Crystal Reports 10.  For example, on a table there is a column called X with values Xsub1, Xsub2, Xsub3, etc.  The user can select a parameter that includes Xsub2 and Xsub4.  If this is selected 2 reports are generated (one for Xsub2 and Xsub4).  What we really want is one report with the combined information for Xsub2 and Xsub4.  How is (or is it) possible to do this in Crystal Reports 10?  FYI - When the report was initially created the main body of the report was placed in the Group Footer so if the Group Footer is suppressed the content of the report is suppressed, too.
    Thanks

  • Can a method return more than one value?

    I was studying for my biology exam and I got bored and I started thinking and then I wandered if a method can return more than one value...?
    For example, if I want a method to return a row a column, I make a method that returns an int. But what if I want to return two ints? Or what If I want to return an integer and a string? Is it possible or do I have make two methods, each returning one thing?
    What I always did until now is is I want for example to return a few integers, I would store them in a String and then when I return the string, I parse the numbers out using stringtokenizer... but it doesn't look like the best way... and it's pretty annoying...

    I'm weak on terminology, hence I don't even know what
    AFAIK means...As Far As I Know
    This doesn't really make sense for me. It's more
    efficient to make a whole class just for two
    integers, than having two methods? Efficiency is not the point. The flow is.
    If you have two methods, the caller must be aware of both of them. The other way it's up to the callee.
    Just because the
    two integers are related to each other? Doesn't
    making a class require more memory usage than just
    making two one-line methods?The memory usage is not wholly irrelevant, but there are ways to handle that (caching, inlining, etc.).
    It's a bit hard to counter your point for me, but if you had done a lot of GUI painting stuff, you'd see all those Points, Dimensions, Rectangles, you name it, are quite invaluable.

  • How to send more than one value to the Jump target report variable screen.

    Hi,
       I have two reports with Plant variable on their input variable screens. Say this Plant can take two values X and Y. The first report is executed with Plant value X and displays data. When a jump is made  to report two, Plant value X is retrievd into report two's plant varible value. Now how to send value Y also to Report two when jump is made. I think we can do it with a customer exit? Any help is appreciated
    Thanks
    Bhanu

    Hi Bhanu,
    I guess u have created a Variable with Sinlge value ,So Create a Variable which has Multiple Sinlge Values or Interval so that u can have more than one value and if u hvae more than value u will get data for those values and when u do a jump then u can see the data in the JUMP query for both the Values of Input.
    Rgds
    SVU123

  • Can I have more than one album art Image displayed on ipod per song?

    Can someone help?
    My issue is that in itunes I can add more than one image (album art) to an individual song. While it's playing, in the display album art (bottom left corner) I can flick through all the images a particular song contains. I got exicted and came to the assumption that not only can I display album art (covers) but also single art (covers) for songs that got release from an album on my ipod. However when I downloaded all the tracks on to my ipod it only displays album art and not single art (covers) for released songs. Is there a way I can have both album and single art displayed on my ipod for a song? I spent hours finding these single art covers on the internet!
    30Gig ipod (Black)   Windows XP  
    30Gig ipod (Black)   Windows XP  

    On the iPod you can only display one picture attached to that song. The one that gets assigned to the song is the first picture on the list in iTunes.

  • More than one index for a column.

    Hi,
    I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
    I just want to make sure whether we can add more than one index for a column
    and if yes what are the scenarios.
    Because as far as i know some database allows more than one index for a single column.

    You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
    SQL> create index idx_mytest_id on mytest(id);
    Index created.
    SQL> create index idx_mytest_id_desc on mytest(id desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
    Index created.
    SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
    Index created.
    SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
    Index created.
    SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
    Index created.
    -- I can still continue but for this example this will be enough
    SQL> select index_name from dba_indexes where table_name = 'MYTEST';
    INDEX_NAME                                                                                                    
    IDX_MYTEST_ID                                                                                                 
    IDX_FBI_MYTEST_ID_UPPER                                                                                       
    IDX_MYTEST_ID_DESC                                                                                            
    IDX_FBI_MYTEST_ID_UPPER_DESC                                                                                  
    IDX_FBI_MYTEST_ID_LOWER_ID                                                                                    
    IDX_FBI_MYTEST_ID_LOWER_ID_DSC                                                                                
    IDX_FBI_MYTEST_ID_TR_UP                                                                                       
    7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
    So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
    Message was edited by:
    Ivan Kartik
    Or simplified: you can't create the same index for same column(s) twice :-)

  • Matching more than one column result

    Hello again,
    I'm using a Property/Estate agent database and one of the questions is: List pairs of buyers and properties whose expectation and feature set are exactly matching.
    The way I designed the database was that each property is connected to a property_features table which is connected to a parent table features_list.
    Similarly my buyer table is connected to a required_features table which is connected to the same features_list table
    I need to match buyers and properties where their required and property features (can be more than one) match.
    I have created queries that return the results for buyers and properties individually but I'm unsure how to link these queries to return only exact matches
    select b.peid
    from  buyer b, features_list fl, required_features rf
    where b.peid = rf.peid
    and rf.fid = fl.fid;
    select p.prid
    from property p, features_list fl, property_features pf
    where p.prid = pf.prid
    and fl.fid = pf.fid;All tables used:
    CREATE TABLE BUYER
         PEID CHAR(8) REFERENCES PERSON(PEID),
         MAX_PRICE NUMBER(9,2),
         CONSTRAINT BUYER_PK PRIMARY KEY(PEID)
    CREATE TABLE FEATURES_LIST
         FID CHAR(5) CONSTRAINT FL_PK PRIMARY KEY,
         DESCRIPTION VARCHAR2(50) NOT NULL
    CREATE TABLE REQUIRED_FEATURES
         PEID CHAR(8) CONSTRAINT FK_PEID_RF REFERENCES PERSON(PEID),
         FID CHAR(5) CONSTRAINT FK_FID_RF REFERENCES FEATURES_LIST(FID),
         CONSTRAINT REQ_F_PK PRIMARY KEY(PEID, FID)
    CREATE TABLE PROPERTY
         PRID CHAR(8) CONSTRAINT PR_PK PRIMARY KEY,
         BRID CHAR(5) CONSTRAINT PROPERTY_FK_BRANCH REFERENCES BRANCH(BRID),
         OWNER_ID CHAR(8) CONSTRAINT PROPERTY_FK_OWNER  REFERENCES PERSON(PEID),
         PROP_TYPE CHAR(10) NOT NULL CONSTRAINT TYPE_CHECK CHECK (UPPER (PROP_TYPE) IN ('HOUSE', 'UNIT', 'TOWN_HOUSE', 'COMMERCIAL')),
         FIRST_LISTED DATE NOT NULL,
         STREET VARCHAR2(30) NOT NULL,
         SUBURB VARCHAR2(30) NOT NULL,
         POST_CODE CHAR(4) NOT NULL     
    CREATE TABLE PROPERTY_FEATURES
         PRID CHAR(8) CONSTRAINT FK_PEID_PF REFERENCES PROPERTY(PRID),
         FID CHAR(5) CONSTRAINT FK_FID_PF REFERENCES FEATURES_LIST(FID),
         CONSTRAINT PROP_F_PK PRIMARY KEY(PRID, FID)
    );Some sample output
    select property.prid, property_features.fid, features_list.description
    from property, property_features, features_list
    where property_features.prid = property.prid
    and property_features.fid = features_list.fid;
    Results:
    PR110011 FE002 family room
    PR110011 FE003 modern kitchen
    select buyer.peid, required_features.fid, features_list.description
    from buyer, required_features, features_list
    where required_features.peid = buyer.peid
    and required_features.fid = features_list.fid;
    Results:
    PE110036 FE003 modern kitchen
    PE110036 FE002 family roomSo, the results from my individual queries show that person/buyer PE110036 has required features that match exactly with property PR110011's property features, I need to somehow write a query that provides this functionality
    Any advice very much appreciated!

    I'm still struggling with this one, would there be a solution using PL/SQL?
    Here are some sample insert statements from the tables involved
    INSERT INTO buyer VALUES('PE110002', 300000);
    INSERT INTO buyer VALUES('PE110005', 900000);
    INSERT INTO buyer VALUES('PE110015', 9000500);
    INSERT INTO buyer VALUES('PE110017', 9000400);
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'sunroom');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'family room');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'modern kitchen');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'swimming pool');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'balcony');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'lock up garage');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'ocean views');
    INSERT INTO features_list VALUES(('FE' || to_char(fl_seq1.nextval, 'fm009')), 'close to transport');
    INSERT INTO required_features VALUES('PE110031','FE003');
    INSERT INTO required_features VALUES('PE110007','FE003');
    INSERT INTO required_features VALUES('PE110031','FE005');
    INSERT INTO required_features VALUES('PE110007','FE005');
    INSERT INTO required_features VALUES('PE110002','FE004');
    INSERT INTO required_features VALUES('PE110002','FE006');
    INSERT INTO required_features VALUES('PE110002','FE009');
    insert into property
    values
    (('PR' || to_char(SYSDATE, 'yy') || to_char(pr_seq1.nextval, 'fm0009')), 'BR001', 'PE110020', 'House' , '25-Mar-07', '153 Carr St.', 'Coogee','2034');
    insert into property
    values
    (('PR' || to_char(SYSDATE, 'yy') || to_char(pr_seq1.nextval, 'fm0009')), 'BR002', 'PE110023', 'Unit' , '22-Jan-07', '6/973 Anzac Pde.', 'Kingsford','2032');
    insert into property
    values
    (('PR' || to_char(SYSDATE, 'yy') || to_char(pr_seq1.nextval, 'fm0009')), 'BR003', 'PE110037', 'Commercial' , '15-Nov-07', '317 Campbell Pde.', 'Bondi','2026');
    insert into property
    values
    (('PR' || to_char(SYSDATE, 'yy') || to_char(pr_seq1.nextval, 'fm0009')), 'BR003', 'PE110019', 'House' , '19-Feb-07', '680 Bunnerong Rd.', 'Hillsdale','2036');
    INSERT INTO property_features VALUES('PR110001','FE012');
    INSERT INTO property_features VALUES('PR110001','FE017');
    INSERT INTO property_features VALUES('PR110001','FE026');
    INSERT INTO property_features VALUES('PR110001','FE002');
    INSERT INTO property_features VALUES('PR110001','FE009');
    INSERT INTO property_features VALUES('PR110009','FE003');
    INSERT INTO property_features VALUES('PR110033','FE003');Many thanks, this forum is a fantastic help!

  • Can we give more than one value for an Authorization field in Auth-Check.

    Hi all,
    Can we give more than one value for an Authorization field in Auth-Check.
    Ex: AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
    ID 'ACTVT' FIELD '02'
    ID 'CUSTTYPE' FIELD <Value 1> <Value 2> <Value 3>.
    IF SY-SUBRC 0.
    MESSAGE E...
    ENDIF.
    If yes, please help me with exact syntax.
    Think it will be like
    ID 'CUSTTYPE' FIELD: <Value 1>, <Value 2>, <Value 3>.

    Hi,
    yes we can give more than one field.
    program an AUTHORITY-CHECK.
    AUTHORITY-CHECK OBJECT <authorization object> 
       ID <authority field 1> FIELD <field value 1>. 
       ID <authority field 2> FIELD <field value 2>. 
       ID <authority-field n> FIELD <field value n>. 
    The OBJECT parameter specifies the authorization object.
    The ID parameter specifies an authorization field (in the authorization object).
    The FIELD parameter specifies a value for the authorization field.
    The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
    please reward points, if it is useful.
    satish.

  • Create a logical column with more than one data source

    I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
    What I want to do is the union of 2 physical tables in one logical table.
    For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
    What I've tried is dragging the datasources I need onto the logical column.
    However this isn't working because it only retrieves the data from the first data source.

    Hi!
    I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
    I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
    Bye.
    Message was edited by:
    user578388

  • Another document series- do I need to tick Permit More than one doc type?

    Hello experts,
    Im thinking of creating another document series for Goods Return and Credit Notes to be used only when they are created due to user errors in GRPO o AP Invoices.
    In order to do this, Do I need to tick the option of "permit more than one doc type per series"?
    Looking forward to your comments,

    Hi,
    If you select "permit more than one doc type per series", you must know the consequence. It may cause you more troubles when you want to distinguish the document types within the series.
    Thanks,
    Gordon

  • Problem with Assigning more than one value to GROUP dynamically

    Hi,
    I have a problem with assigning more than one value to GROUP varible dynamically.
    I am able to assign only one value dynamically through Initialization block
    I have even tried with the ROW-WISE initialization blocks..
    using this query..
    SELECT 'GROUP', G.GROUP_NAME
    FROM GROUP_MAP G
    WHERE G.USER_NAME = ':USER'
    if GROUP_1, GROUP_2 are two groups to be associated,
    through this, i'm getting " GROUP_1;GROUP_2 " into GROUP variable ( seen from Narative view )
    And the properties and securities of this Groups are not inherited.
    Please let me know if there is any other way to Populate the GROUP variable dynamically with more than one value.
    Thank you.,

    Hi,
    i finally got in this way..
    i had created a function which takes USER_NAME as input and returns a string that contains the GROUP names with semicolon delimeted..
    Though it is same as that of ROW-WISE initialization,
    the properties of those groups are also being inherited..
    Now, i can assign more than one groups and its properties to a user dynamically.

  • How to create combobox to display more than one columns

    I need kind help with the following question. As the combobox includes two pieces--textbox and the combobox list. Then how to create a combo box bean, which is based on table EMP(empno number(6), ename varchar2(40)) records for example, to achieve these features:
    1) allow more than one columns to be displayed in its records list--e.g., I need to show these records:
    empno (value) ename (label)
    103 David M Baker
    104 David M Baker
    105 Kelly J Volpe
    106 Krista F Carpenter
    107 Michelle P Silverman
    The two 'David M Baker's are different employees, but unfortunately, with the same name.
    2) allow combo box list to return the column value 'empno' even though it shows both columns as above. i.e., if user picks the second record above, then the combobox list returns 104 to the textbox in the background, but the 'David M Baker' is displayed on the textbox. Of course the combobox list may return 'David M Baker' if needed when there is only one column in the list as the current standard feature.
    3)allow partial match search by typing in some letters. i.e., if user types in the textbox of the combobox letter 'K' or 'k' then the partially matched records
    105 Kelly J Volpe
    106 Krista F Carpenter
    should be automatically displayed in the combobox list, not the whole list as above; then user may double click to choose one of the two or if user continues to type in 'R' or 'r', then the uniquely matched record 'Krista F Carpenter' is displayed in the textbox and the 106 is returned to the textbox.
    4) as a bonus if it's doable, allow combobox to return values to different textboxes when its records list has more than one columns.
    The reason I need these features is that I am working on the project migrated from Microsoft Access applications to centralized Java version web application. We at beginning promised to users community that Java swing will provide all the GUI user friendly features Microsoft Access has, but now we got stucked--we ate our words and got tons of complains from our users community. This is just the most needed component I posted here. I really hope that Java would add all the default GUI user-friendly features to compete with MS since its Win95 GUI has been accepted as industry standard. And most users are used to it. They claimed that they don't know and don't care what tool you use the newly created application should be more user friendly, not the opposite.
    I would be very much appreciated if any one would help me with this item.

    Thanks for your comments. I think nobody expects Sun to write everything including special features for its components. But I do think Sun should provide at least those standard user-friendly features for the GUI components because most users have been used to the GUI user-friendly features provided by Win95 and Access/Excel applications. Then this will help us to productively create applications to beat MS applications.
    Other wise like me, to get the existing GUI features, existed in old MS Access application, for our migrated Java application, I must re-create the GUI components library first which is a big burden to me at least, for others it might be fun for coding on their own from scratch, but I have to focus on the timing of project.
    If you really can pass the request to Sun and push them move a bit, please pass these words: before Sun starts to revise them, please play around window GUI, e.g., Access/Excel applications, then plan what to do, the bottom line is to equally match or better than them in FUNCTIONALITY(Look and feel is not my focus here). Don't ignore the influence of Windows regardless of you hate it or love it, the reality is most users are so familiar with windows GUI features which are accepted as industry standard. Thus the choice is to match or better to beat them. Don't make your car by closing your door, don't assume users will like what you come out in a closed room.

  • How to display(binding) values in the table from more than one node?

    Hi,
    I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
    When i bind second one, first one is getting replaced.

    Hi Mog,
    Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
    If you have a table control, have a look at the properties and the elements belonging to it.
    First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
    Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
    Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
    If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
    Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
    If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
    Ciao, Regina

Maybe you are looking for