Display Components for issuing

Dear All,
How to display issuing components for which planned quantities has been fully issued:
System throws an alert message as : "Cannot display components for issuing; planned quantities have been fully issued"

Thanks for your reply..
but the scenario is
whether i can do any number of issue of production if planned qty and issued qty are equal for the same production order.
If i trying to do such scenario system throws an alert message as "Cannot display components for issuing;planned qty have been fully issued"
Please do the needful

Similar Messages

Display components for process chains

Hi all,
i remember a sap note or a how to guide to configure the display components for process chains as hierarchy like:
- my chains
    - daily
    - weekly
    - monthly
         - monthly admin
         - monthly xyz
but right now i find no information about that.
Do you?
thanks for your help.

Hi,
Check below threads -
Change the Directory of a Process chain.
Process chain: Moving chain from one u0093folderu0094 to the other
AleX

How to show returned components on Issue for Production on a query.

Hi Guru's,
Is there a way to show the items that have been returned (Return Components) on Issue for Production using a query?
Thanks and Regards,
Christian

Hi,
1. Create row level UDF for issue from production order.
2. Assign below FMS to this UDF and set it auto refresh based on quantity.
SELECT T0.[Quantity] FROM IGN1 T0 WHERE T0.[BaseRef] = $[$13.61.number] and T0.[ItemCode] = $[$13.1.0]
Thanks & Regards,
Nagarajan

Error when trying to Display WSDL for Sender Agreement

Hi,
I'm getting an error when trying to display WSDL for a sender agreement. The error message is as follows:
Adapter Engine af.xxx.yyy for communication channel not registered in SLD Unable to find the SLD element (SAP_XIAdapterFramework, [CreationClassName, SAP_XIAdapterFramework, string, Name, af.xxx.yyy, string], [AdapterType, SOAP, string])
The SOAP adapter being used is from the non-central AE. I I immediately checked for inconsistent SLD components per note 746176 but everything is in order there. I tried re-registering manually the non-central AE manually as well.
Anyone else ever had the same error? Any hints much appreciated!

Hi Luqman,
go to the sender channel and replace the Adapter Type.
Select the type as SOAP from SWCV SAP BASIS 7.xx or SAP BASIS 3.0
The channel is referring to a swcv which is not present in esr.
As you might know, the adapter metadata is fetched from ESR/IR, so if the SWCV containing the metadata inside namespace http://sap.com/xi/XI/System etc, is not available then it will throw error.
If you do not want to change the Adapter Type in the channel, import the swcv from SLD to ESR and create/import the respective adapter metadata.
Should resolve your issue.
Cheers!
Souvik

ENT-06954: Error while Displaying BIBean for Cube/Dimension Dataviewer.

Hi all,
I have defined a cube with three dimensions. All elements are deployed and the mappings is executed successfully. If I try to open the dataviewer either for the cube or for the dimensions I receive the following errors:
ENT-06954: Error while Displaying BIBean for Cube Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
In another warehouse this function works properly. I am using OWB 10gR2 (10.2.0.1.31).
Any hints to fix this issue would be appreciated.
Thanks in Advance, C.

If you run OWB using the supplied shell script or batch file are there other errors on the console before the exception. OWB uses a component (OLAPI does some validation over and above any other) which dumps the errors on the the standard output which often illustrates some invalid metadata in the OLAP catalog.

Lack of useful components for application developer :-(

I want to share some remarks about our rewrite old Windows application to new AIR/flex application.
If any Adobe staff will reading this it will be great :-)
For colorfull web application with exotic buttons is Flex undoubtedly great choice.
But there is many developers (and firms like us) who looking for something little different.
We got bunch of Windows application written in Delphi. And we want (must) to move to another technology.
AIR is superior in language, runtime, simple move-to-web, blazeDS, tools and ecosystem growth is promising.
The only bad thing about Flex/AIR is UI. Yes, you hear right. UI is our biggest show-killer. And I am afraid that even with spark it will not be better.
We wrote application not coloring-book.
So we want only basic but state-of-the-art UI-standard componnets.
ToolBar, CoolBar, Button with three states, Button with icon and auto-disabled-grayed-icon, etc..
1) I found on the web three technique how to add icon on the spark button. Two of them include skinning. Absolutly confusing!
2) No useful CoolBar. How long it takes make CoolBar like in Adobe Acrobat Reader or MS Word in my application? This is matters for me!
I dont want two or three full-time developers extra for making basic components for us.
In this point Silverlight got 100% lead. No doubt.
http://www.componentone.com/SuperProducts/StudioSilverlight/
http://demos.devexpress.com/AgMenuDemos/
We still evaluate both technologies. We like Flex because is more JAVA friendly that SilverLight, but lack of usefull components will be final dead-end.
Am so sorry.
Know Adobe staff about this issues?
Want Adobe application-developers or only web-developers?
Planning Adobe making application components in the future or is satisfied with current state?

One thing is what is technology is better for me. More jobs in the future.
Another thing is what is better path for migrating a lot Delphi application.
Is realy so hard to make simple, nice and usefull toolbar in Flex? I cant find anything. So maybe I must try myself :-(
What you mean with "Microsoft can no longer execute on new technologies well"?
My main question in previous post should be "what about lack of useful components".
And I expected one of this answers:
Adobe is happy with current state. Main Adobe bussines is colorful web-application.
Adobe know there should be rich components, but now has no time. In the near future Adobe deal with it.
I am dummy person and making great "toolbar" is easy as a piece of cake.

Up-to-date Display Driver for Dv6-3077CA?

I recently bought an HP Dv6-3077CA (Intel Core i5 2.26GHz, 4GB DDR3 ram and 1GB ATI Radeon HD 5650)and was looking to play some Starcraft II the other day when I noticed that many of the Graphics options were grayed out and unchangeable.
My first step towards fixing this was checking the Blizzard website for info and noticed that the required display drivers for Starcraft II to even detect my graphics card were the ATI Mobility Catalyst Drivers version 10.2. I then proceeded to find my current version and discovered I was running 10.1.
Now my next step was the obvious one of going to the ATI website and downloading the Mobility Catalyst Drivers for my Graphics Card which I did but could not install. I recieved an error message from the Software installer that I had software on my computer interfering with the installation and that I needed to get the Drivers from the manufacturer's website. So of course I came to the HP website and located the download for my Drivers and went through the download and install process.
Nothing went wrong during this step, but upon rechecking my Driver Version I saw that it had not changed at all! I was still only running 10.1. So my questions are the following :
Did I have the incorrect Drivers by any chance?
Is there a way for me to safely get the Drivers from the ATI website?
And if the answer is no for the above questions, When will HP release the proper up-to-date Drivers for my Mobility Radeon 5650?
Thanks in advance for the help resolving this issue. I am hoping you can provide an answer soon.

I appologize about you not getting a response untill now.
Your drivers are correct and the latest it just seems that a newer HP driver has not been released for this particular product. Even though it is not supported by HP you can uninstall the display driver currently installed and try the ATI ones to resolve your issue. I don't have a dv6-3000 to test your exact issue on but I did try Catalyst 10.9 on an Envy 14 w/ the Radeon HD 5650 graphics card. It did install and function correctly.
Good luck to ya!
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Payment Block field in invoice displays 'Free for payment 'even though ?

Hi,
We have set necessary upper tolerance limit for Price & Quantity variance in OMR6.This should block invoice for payment in case if this limit is crossed and payment block field in invoice should display "R Invoice verification".
In our case if material is having standard price then we are getting desired results in both the cases of Quantity variance and price variance . However in case of material with moving average price it works fine in quantity variance but not for price variance(Here invoice gets blocked for payment but payment block field displays "free for payment").What can be probable reason for this?
Material ledger is activated in our case.
Thanks in advance,
Sanjog

Hi,
Currently, we are also facing the same problem.
The payment term are not getting populated after posting the invoice.
Could you please help to overcome the issue.
Thank you.
Warm Regards,
Kalyani

X300 display driver for XP

When will you update the X300 display driver for XP? Now we are still using the driver issue date is Jan, 08 (6.14.10.4860) too old, a lot of game are not be supported. Waiting for your reply. Thanks!
LB

Well, if you just find this version, I guess it is the newest one, Toshiba has released.
I'm not quite sure, what those alternative drivers were called, but I haven't meant the reference ones from NVIDIA itself.
I think it were laptopvideo2go, but haven't tried them. So use at own risk.
And what I meant, was, that the card is not too weak for running those games, but to have all settings on high. Ok, you have to excuse me, in this point I'm a bit of an enthusiast, wenn everything runs on that high detail level ;)

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

BB Flip External Display Caller Notification Issue

Hello-
I have owned this phone for approximately two weeks; and until today it was working perfectly. As of today the external display is no longer working for "caller ID" or incoming call notification. The temporary fix was to disable the "auto answer" function for convenience, although this does not truly solve the problem.
The question is how can I restore the external display as it was working prior to today with the display of "caller ID" incoming call notification? Incoming emails, SMS previews; continue to work properly on the external display, and the issue appears to be isolated to incoming call notification.
Is this a bug with the device, or is their a fix to the problem?
Any help or guidance greatly appreciated.
Message Edited by skilltel on 11-03-2008 09:05 PM
Message Edited by skilltel on 11-03-2008 09:06 PM
Message Edited by skilltel on 11-03-2008 09:06 PM
Solved!
Go to Solution.

Hi and welcome to the forums!
Did you try the battery pull we talked about?
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Missing display driver for Satellite C670-188 PSC3YE

Hi, I who can explain why the site is no driver for the video?

w7 64
put the driver http://support1.toshiba-tro.de/tedd-files2/0/display-20110405114405.zip
This driver enhances the functionality of your display device and allows you to perform different settings, such as Color Management, Monitor Properties or Overlay Control. You can also get help if you have any display related troubleshooting issues.
Model Satellite C670
Windows 7 - 64 Bit
w7 -32 for all three drivers only (

Where can I buy original LCD display module for iPhone 5?

I have my iPhone broken! Is it real to buy a ORIGINAL display module for iPhone 5?

officially nowhere
apple don't sell spare parts
and don't reapir such issues
3th party repair places does where they get their parts and if they are "official" parts I have no idea

Display times for "action objects"

I work on a MacBook Pro, MaxOSX 10.7.5, Captivate 6.
I need to hide a button that we have made as part of a "overlay" GUI - a form of CSS. We created a master project and coded it to be downloaded to all our other projects as a overall GUI.
But in some projects I'd like to hide a single button - not to be able to press. Not through the whole project but after let's say three to five slides. I tried using a simple smartshape but the hidden area can still be clicked. Using clickboxes or button allow me to over ride the "CSS-button" but they have a major flaw: they only last the rest of the slide and I'd like to have them throughout the entire project.
Copy-paste is NOT an option in this case - the project lenghts are vast ...
Is there a clickbox, button, other object or advanced action that could make an "action object" to be displayed throughout the entire project?
Or is there a widget och well trimmed programmer out there that could solve this?
Very grateful for all good tips and answers!
/Cheers!

Hi,
Thank you for the welcoming seems like a good forum
to hang out in and learn new things!
I guess I wasn't as clear as I should when describing
my issue.
In our work we have made a "Master Project" to function
as a sort of CSS (Cascade Style Sheet) - just like you did in
former web design.
The Master Project functions roughly as a Master Slide
but it has some benefits that a Master Slide isn't capable of.
We use the Master Project to export our interface to
all the other projects within the e-learning project.
So instead of having to make changes in the Master Slide
in every project we have a better control of GUI
changes affecting the overall e-learning project.
Your links have given us a great tool to work with!
We have completely missed the possibility to convert
a smartshape to a button and with that making it
posible to be displayed throughout the project.
Many thanks for those tips!
All the best and a happy week-end!
/Patrik
Från: Lilybiri <[email protected]>
Svara till: <[email protected]>
Datum: torsdag 7 mars 2013 14:09
Till: Patrik Lögdqvist <[email protected]>
Ämne: Display times for "action objects"
Re: Display times for "action objects"
created by Lilybiri <http://forums.adobe.com/people/Lilybiri> in Advanced
Adobe Captivate Users - View the full discussion
<http://forums.adobe.com/message/5128986#5128986>
Hello and welcome to the forum, But I don't understand your question very
well. Perhaps it is only a matter of terminology. What do you mean by 'Master
Project'? Is that a template, in which you have a custom theme, perhaps some
advanced actions, variables, and of course master slides? You need interactive
objects on all or a lot of slides, correct? I have been blogging a lot about
the shape buttons, only interactive objects that allow that. Even did a
webinar about them for Adobe. Here are some
links:http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6http:/
/lilybiri.posterous.com/toggle-shape-buttonshttp://lilybiri.posterous.com/want
-a-button-on-question-slide-in-capti vate
<http://lilybiri.posterous.com/want-a-button-on-question-slide-in-captivate>
http://blogs.adobe.com/captivate/2012/09/training-lilybiris-favourite-
shapes-to-trigger-advanced-actions.html
<http://blogs.adobe.com/captivate/2012/09/training-lilybiris-favourite-shapes-
to-trigger-advanced-actions.html> If you want control over the visibility of
such a shape button, do not put them on a master slide, but time them for the
rest of the project, starting with the slide where they should appear for the
first time. Reason is that objects on master slides do not have an ID, which
means that they cannot be hidden or disabled using a (advanced) action.
Lilybiri
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at http://forums.adobe.com/message/5128986#5128986 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: http://forums.adobe.com/message/5128986#5128986 To
unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/5128986#5128986. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Advanced Adobe Captivate Users by email
<mailto:[email protected]il.fo
rums.adobe.com> or at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
pe=14&container=2268> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746.

Display Components for issuing

Similar Messages

Maybe you are looking for